Features

• Heavy Duty
• Tempered Spring
• Vinyl Covered Tip
• Comfortable Plastic Handle
• Includes 4 Pcs 6" Clamp, Includes 2 Pcs 9" Clamp, Includes 4 Pcs 4" Clamp

Product Description

Patented profiled rails with serrated edges prevent buckling and slipping. And the ergonomically designed wooden handles offer positive clamping pressure. ... Read more

Features

• Soft-Grip beveled handle
• Heat treated bar
• Double threaded screw thread

Features

• Non marring pads
• Patented profile rail
• Non-slip locking device
• 1 beam design
• Zinc finished drawn rail

Reviews (2)

Very good light duty bar clamp
If you are going to use this for clamping with any significant force, get a heavier clamp. Working with picture frames and similar light work, or in reduced lengths, this clamp will work well for you. When I stretch it out to ~15 inches and apply enough force to push 2 x 4's together on a biscuit, it flexes by bowing the I-beam in a semi-circular arc. This throws the jaws out of alignment and applies and off center force that causes the joints flex out of square.

In summary, if you are doing light work, this clamp is a great value. If you need moderate clamping force, save your money and buy a more appropriate clamp that won't flex on you.

An essential home craftsman's clamp.
This clamp is the perfect little tool to have around your house when you're building or mending small drawers or chairs. This is not a heavy duty piece, but you can manually tighten it to the point where it damages your object. Its important to remember that it doesnt have cushions and you need to use some kind of wooden or hard rubber spacer to protect the surface of your object. ... Read more

Features

• Made in USA
• Quick & easy to use
• Squares up work
• Made of galvanized steel
• Does corners and "T" shapes

Features

• Secure hold
• Low cost
• Lightweight
• High quality
• Instant adjustment

Reviews (1)

Excellent budget wood clamps
You can't beat these clamps for the money. Enough pressure can be applied for glued joints without excessive flexing. Also, you can accumulate a good collection without going broke. ... Read more

Features

• Ideal for Hobbyists, crafts and any light-duty application - 100's of uses!
• Colorful selection
• Handy lidded plastic jar w/handle for easy storage
• Fun and easy to use!

Features

• 4-inch opening with 3-inch depth capacity and full closing screw
• Steel screw has special smooth "rolled" threads, revolves freely and fastens securely
• Steel sliding-pin handle
• Frame has bright plated finish with machine-ground anvil

Product Description

Made in USA. Lighter and 40% stronger than C-Clamps. Floating jaws always stay parallel. V-grooves in jaws for round stock. Copper plated jaws and screws. T-handle. ... Read more

Features

• A: 2"
• B: 1 1/8"
• C: 3 21/32"

Product Description

These quick-action toggle clamps are extremely useful for bench-mounted jigs and special jigs for machinery. Grizzly offers a terrific selection of down and push-type toggle clamps to suit a wide range of clamping applications. ... Read more

Features

• Action type: clamp down
• Handle position when locked: up
• Holding force: 220 lbs.
• Size: 3" x 3"

Features

• Enlarged handle
• Double threaded screw thread

Product Description

BABCO Ratcheting Bar Clamp and Spreader. One-Handed Operation - 2-inch Deep Throat - Reversible Front Jaw for Spreading. 18-inch capacity ... Read more

Features

• 18-inch capacity
• Reversible Front Jaw for Spreading
• One-Handed Operation
• 2-inch Deep Throat
• Ratcheting Bar Clamp and Spreader

Product Description

Just a simple squeeze and release is all it takes to keep your work held securely in place. These Spring Clamps are unbeatable for securing glue joints, clamping jigs, holding down tarps, or hundreds of other shop chores that require and "extra hand". Handles are contoured for comfort and control. Non-marring jaws pivot to increase their grip on uneven surfaces. Tough polymer construction. ... Read more

Product Description

Wood Handle - 18" Metal Bar - Cast Iron Frame - Set Of 4 Bar Clamp ... Read more

Features

• Wood Handle
• 18" Metal Bar
• Cast Iron Frame
• Set Of 4 Bar Clamp

Amazon.com

Every workshop needs at least one vise, and Pony's incredible clamp-on vise is perfect. It's completely portable and clamps onto any table up to 2 inches thick. The sliding handle turns like a charm, and you're set. For such an incredibly inexpensive vise, the jaws are really wide, and they even have a serrated surface, with an open capacity of a full 2-1/2 inches. We can think of a thousand uses for such a handy device. It's like an extra hand whenever and wherever you need it. Pony's earned its reputation as a maker of fine clamps, so you know anything in the distinctive bright orange color will do right by you. This is no exception.--Kris Jensen-Van Heste ... Read more

Features

• 2-1/2-inch jaw opening capacity for holding a variety of materials
• 3" serrated jaws for steadfast clamping
• Table clamp mounts solidly on worktables up to 2 inches thick
• Double guide bars for positive clamping
• Made with plated steel for longer tool life

Reviews (2)

Good for jewelry work
I am very pleased with how well this little vise works. I make silver jewelry and this was one of the few vises I have found with smooth clamp faces. I use it to draw wire, make bends and hold pieces for detail work. It is solid enough for some heavy hammering-on, and the screw is precise and smooth in operation. A very well-made tool.

THE ORIGIN OF PRODUCTION
I DID NOT EXPECT THAT THIS FAMOUS BRAND IS NOW ONE OF THE MANY RESPECTED BRAND NAMES ALREADY BEING MADE IN CHINA. WE ALL WANT QUALITY TOOLS TO LAST. I HOPE THE QUALITY DOES NOT CHANGE ... Read more

Features

• 3-inch opening with 4-1/2-inch depth deep throat capacity and full closing screw
• Steel screw has special smooth "rolled" threads, revolves freely and fastens securely
• Steel sliding-pin handle
• Frame has bright plated finish with machine-ground anvil

Product Description

Hold-down clamps are a must for surface clamping on the work bench or machine tables. The can pivot or be removed quickly by loosening the mounting bolt (supplied). Includes these features: Malleable and/or ductile iron castings with durable baked on enamel finish, precision cut 9/16" Acme screw, mounting hardware. ... Read more

Features

• Malleable and/or ductile iron castings with durable baked on enamel finish
• Mounting hardware
• Precision cut 9/16" Acme screw

Features

• Most Popular C-Clamp
• Ductile Iron Frames
• Designed for Craftsman, Woodworker and light Industrial Use

Features

• Nickle Plated
• Ergonomic-Shaped Handles
• Protective Covers

Features

• Double-rolled thread for faster clamping and increased durability
• Larger swivel pad reduces marring on work surface and increases stability
• Larger handle for greater clamping pressure with less effort and reduced hand fatigue