Features

• Wide head, sharklike serrated-tooth design
• Accessory item for 401 and 501 Porta-Nailer
• 10,000-pack

Reviews (2)

Buy the floor nailer that uses these nails
Its that simple. Spend the bucks, and you will not regret it. These nailing cleats are the best way to attach a piece of flooring to a subfloor. They hold tightly forever. I've never had a callback on a floor put in with porta-nails cleats. I own the new pneumatic porta nailer and think its great. Its a little more money than the competition, but well worth it. No jambs or messed up nails. It just works.

Porta-Nailer
The Porta-Nailer is by far the most reliable flooring nailer on the market. The nails hold extremely well. They do not split the wood. Because the nailer is actuated by the hammer that is included, the boards are driven up quite tight. It will straighten even the most stubborn flooring. I have owned this nailer for ten years and have had no trouble. ... Read more

Features

• 1 1/4" long
• 7200 per box
• galvanized
• Weight = 35 pounds

Features

• 2-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (3)

Smooth as Silk!
Just finished the casing on the closet door frames in my daughters' room. These were flawless in my Accuset 200BN.
Never a jam with the 2" brads or the 1 1/4" brads!

Average Performance Brads
These are functional, but not very tough. They seem to be a little softer than some other brads I have used, which lets them deflect fairly easily at this long length. Therefore, keep your fingers out of range! They do hold well and are difficult to remove if you make a boo-boo.

Nailed again
I am a finish contractor and I really find it nice when i can buy a quality product that will not damage either my tools or the project that I am working on. These nails feed thru my accuset brad nailer w/o any trouble at all and plan to switch over to them fulltime. ... Read more

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 1" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• 3-1/2" x .131 plain shank framing nails full round head
• Quantity 500/box
• Fits the following guns Hitachi NR83A, NR90AC, Duofast CN350, Senco SN60, SN65, Makita AN8300, Porter Cable FR350

Reviews (4)

Good nails. Good price.
If you have a Porter Cable FR350, for some reason finding nails can be a slight problem. The mega home store with the orange sign has them, but not consistently. So these are a good stop-gap until you can find more.

They drive well and seem to hold well.

Won't work with the PC FR530 Nail Gun
These may be great nails, but they'll probably jam and misfire with the Porter Cable FR530 nail gun. The FR530 needs plastic-collated nails, not paper-collated like these are. I made the mistake of buying a ... case of paper-collated nails, only to have non-stop problems with them. Only on the Porter Cable website does it mention that the gun uses plastic-collated.

a bit short
good nails, good collating, but they are not 3-1/2 inches long, only 3-1/4......

Some Excellent Nails!
If you are looking for the highest quality nails for your nails gun then you better get these. I have used these forever and they have performed to the highest extent the whole time. They have never jammed or messed up my guns. These are top of the line ... Read more

Features

• 1-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (2)

Shiny, Sharp and Cheap
Wow! Age of wonders this is a fantastic product.

Itty, Bitty Brads for Your Power Nailer
These are fairly soft as brads go, but at this length, deflection is not a major problem. You do still have to be careful, though. These are fine for smaller chores, like fastening thin shelves in dadoes or applying trim moldings. They hold well, but are tough to remove if you misfire. ... Read more

Features

• 1-1/2-inch finish brad nails
• 18 gauge
• 5,000 per pack
• For use with Hitachi, Senco, Porter Cable, Airy, Bostitch and Accuset nail guns

Reviews (3)

Work well for me.....
I have used these nails extensively in my Bostich BT-50 (on my 3rd box of 5000) with no problem at all. Possibly other manufacturers have lower tolerances or are not up to par with the Bostich, but the nails work just great.....

Useful Size, But a Little Too Flexible
This is about the most common brad size I use in my shop. These are fairly soft, so deflection can be a problem if you are not careful about the material you are nailing. Avoid knots and obtuse angles on plywood. They hold well and can be difficult to remove once driven.

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• 1-1/4-inch finish brad nails
• 18 gauge
• 5,000 per pack

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,492 assorted 1/2", 5/8", 3/4" and 1" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• 2-inch galvanized finish nails
• 15 gauge
• 4,000 per pack

Features

• 2-inch finish nails
• 16 gauge
• 2,500 per pack

Reviews (1)

Really Hit The Nail On The Head.....
Great product works great in Bostich nailer. Will purchase again when needed. ... Read more

Features

• 2-1/2-inch finish nails
• 16 gauge
• 2,500 per pack

Reviews (1)

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• 1-1/2-inch finish nails
• 16 gauge
• 2,500 per pack

Features

• 20-degree 16-gauge nail for finish nailing
• Manufactured out of cold-worked carbon steel
• Galvanized in a "hot-dip" process which ensures that the fastener will resist rust and moisture

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 3/4" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 1/2" pins
• 23 gauge galvanized pin
• Convenient clam shell package

Features

• 3/4-inch finish brad nails
• 18 gauge
• 5,000 per pack

Reviews (2)

18 gauge brads in a 16 gauge nailer?
I haven't tried these yet, hence the neutral score, but I suspect Derek's problems might have been due to trying to use 18 gauge nails in a 16 gauge finish nailer (FN250A). No wonder they would misfire.

Poor Quality Nails for the Porter-Cable Finish Nailer
These nails are not of the quality necessary for the Porter-Cable Finish Nailer that they are typically advertised with (FN250A and others). They sometimes came out 2 at a time, not at all, or caused the nailer to jam. I called Porter-Cable, and acquired their nails, and the problems went away. I would not recommend these nails, especially for this nailer. ... Read more

Features

• Pin designed for delicate projects such as craft assembly
• Package includes 2,670 5/8" pins
• 23 gauge galvanized pin
• Convenient clam shell package