Product Description

Tough labor doesn't have to be tough on you. Superior plowing and hauling with power steering and 2-stage clutch with live PTO. 540 and 1000 RPM PTO. Control panel allows you to monitor fuel, oil pressure, hours and Amps. Comes with a 3-point hitch and canopy. Three cylinder liquid cooled diesel. Consumer use 6 month limited warranty on parts and labor. ... Read more

Features

• Model: NT-254
• Description: 25 HP 4x4
• Overall Dimensions: 117.7in. (2991mm) L x 56.6in. (1300mm) W x 84.7in. (2151mm) H (to top of canopy)
• Net Weight: 2469 lbs. (1120 kg)
• Min. Operating Weight: 2734 lbs. (1240 kg)

Product Description

120 auger RPM. Fingertip control on reinforced handlebars for 2-person operation. U.S.A. Order auger bits separately. ... Read more

Features

• Lively 3.8 HP Tecumseh 4-cycle gas engine
• Centrifugal clutch and 30:1 gear ratio
• Fingertip throttle control

Product Description

This grease gun uses standard cartridges of grease. It can pump up to 10 cartridges per charge at 10,000 pressure. ... Read more

Features

• 10,000 psi
• 3 Way Loading
• 36" Hose
• Delivers up to 10 cartridges of grease
• 2 Batteries, Charger, and Case

Product Description

The Deer Fence Mighty Mule Driveway Gate Opener is battery powered; the battery charge is maintained by either the AC Transformer (included) or the Solar Panel accessory. The battery acts as its own backup during a loss of power service and will provide power for many opening and closing cycles before needing a recharge. Mighty Mule E-Z Gate Openers feature an auto-close feature that is adjustable from 1-120 seconds, so you don't need to worry if you closed the gate, or you may turn it off and open and close the gate manually using your remote transmitter. It also has an adjustable "obstruction sensing" feature that automatically reverses the gate for 2 seconds and stops when the gate encounters an obstruction. The Mighty Mule E-Z Gate Opener includes: opener arm, AC transformer, 12 volt battery, control box/control board, receiver with 10 ft. cable, entry transmitter, 4.5 ft. "quick connect" power cable, mounting hardware, installation/safety manual, caution signs, installation video. ... Read more

Product Description

Bits fit our powerheads 19112, 191145, 191155, and 191158. Hardened blade. Items 191141, 19114 and 191142 heavy duty bits have exclusive Shock Absorber Spring to protect you and gear train from impact of hitting rocks and other obstructions. ... Read more

Features

• Diameter x Length: 8in. x 36in.
• Overall Length: 33in.
• Shaft: 7/8in.
• Bolt Hole: 3/8in.

Product Description

Powerhead gives you FAST earth drilling. Full 3 inch diameter heavy-duty clutch. Anti-vibration handle grips. Order auger bits separately. ... Read more

Features

• 85cc Tecumseh engine turns at 338 RPM
• Turns 2 inch to 10 inch diameter auger bits, clockwise
• Torque Output: 56 Ft. Lbs.
• Shaft Dimensions: 7/8in. Round with 3/8in. pin hole
• Gear Ratio: 16:1

Product Description

Black and white vinyl seat cushion for International Harvester tractors and row croppers. Includes upper and lower backrests. All components with steel backs, high density foam ... Read more

Features

• Hardware not included

Product Description

Three easy strokes of the 30in. handle pull medium or heavy duty metal fence posts! Won't bend them. Steel puller is 36in. high. Works from either side of post. Tough gray finish. U.S.A. ... Read more

Product Description

These 12 in Kinked Galvanized Deer Fence Stakes are used to secure the bottom of the fence to the ground to prevent deer from pushing up under the fence. The stakes should be placed about every 5-10 ft. ... Read more

Product Description

Keeps gates from sagging or dragging! All steel construction with a 10in. rubber wheel for rolling over rough terrain. Adjusts up to 24in. and locks into place. Fits steel and wood gates. U.S.A. ... Read more

Product Description

All-steel driver with 21in. inside length and 1in. thick striking plate. 3 1/2in. capacity. Ample seam welds secure the 1in. dia. C-handles to driver shaft. Handles are angled away from user for natural gripping position. U.S.A. ... Read more

Features

• For digging post holes and footings in most soil types
• Atlas pattern, one piece, high carbon steel blades with 5-1/2" point spread and beveled digging edge
• 48" Hardwood handle

Product Description

Bits fit our powerheads 19112, 191145, 191155, and 191158. Hardened blade. Items 191141, 19114 and 191142 heavy duty bits have exclusive Shock Absorber Spring to protect you and gear train from impact of hitting rocks and other obstructions. ... Read more

Features

• Diameter x Length: 4in. x 30in.

Product Description

Molded cushion allows air to circulate around you. Drainage holes help seat dry quickly. Seamless black vinyl cushion over a drawn steel pan with protective edge trim. Center 1/2in. mounting hole and 3 mounting patterns (8in. x 11 1/2in., 7 1/2in. x 7in. and 8 3/16in. x 5in.) fit equipment by Toro, Ford, Snapper, John Deere and many others. Seat can also be used for counter stool replacement. Dimensions: A= 19 3/4in., B=19 1/4in., C=14 1/8in.. U.S.A. ... Read more

Product Description

This Novice Plus Tool Kit includes 7 3/4" Ashinaga Shear- 8 inch Novice Wire Cutter, 8 inch Concave Cutter- 10 inch Root Rake- 8 inch Tweezers, Leaf Trimmer, Hemp Broom 130mm, Drainage Netting 1 piece, Protective Cordura Nylon Tool Roll ... Read more

Features

• 3 year warrantee
• Save Money when bought as a kit
• Includes the essential Bonsai tools
• Plus Tool Roll to store and protect your bonsai tools
• A Broom And Drain Screen, to get started on your potting.

Product Description

This electric fence tester not only indicates if your fence is electrified but if it is hot enough to keep animals secure. ... Read more

Product Description

These heavy duty rebar ground stakes should be used to secure your Deer Fence to the ground and are recommended for rocky or clay soil types. Stakes should be placed about every 5 ft - 10 ft. ... Read more

Features

• Drop Forged
• Cushion Grip
• Heat Treated

Product Description

Poolguard Gate Alarm mounts next to any gate which gives you easy and quick access to your swimming pool. Any gate which allows young children quick and easy access to a pool area is dangerous and should have a gate alarm. All pools should be fenced, but the weakest link in a fence is the gate. The Poolguard Gate Alarm comes with two magnetic switches, 6 foot of hookup wire, and operates on one 9-volt battery. The gate alarm has a delay switch which allows an adult to pass through the gate without the alarm sounding. When a child opens the gate, the alarm will sound in seven seconds and continue to sound; the alarm will sound in seven seconds even if a child should go through the gate and close the gate. If for any reason the gate is accidentally left open, the alarm will sound. ... Read more

Features

• Pass Through Feature for Adults
• Easy to Install
• Approved for Outdoor Use
• Simple to Operate
• Battery Powered

Product Description

Heavy duty steel extension shafts have 7/8in. F and M ends. Right hand turn. Fits our items 19112, 191145 and 191155 powerheads. ... Read more

Features

• Length: 18in.