Product Description

PHOBOS BT: Irreversible low voltage Residential swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft. Complete with eletronic torque limiter and magnetic limit switches. Designed for residential use and suitable for very restricted spaces. If the space between the gate and the fence is not enough, PHOBOS BT can be installed into a very small niche. The control board Libra includes an integrated rolling code receiver, self-diagnosis tracking and learning of statistical parameters. SPECIFICATIONS: Operator Master/Slave PHOBOS BT; Voltage 24V; Motor revolution 3800 min-1; Power absorption 40W; Current 1.5A; Pushing and pulling force 2000N (400lb); Working stroke 11in (28cm); Rod speed 0.5 in/s; Impact reaction integrate torque limiter on Libra contorl board; Limit switches magnetic (adjustable); Manual release CLS release key; Degree of protection IP 44; Controller weight 50N (11lb) - (5kg); Lubrication permanent grease. ... Read more

Features

• Irreversible low voltage swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft.
• Kit Includes: Master and Slave Phobos BT swing gate openers.
• 1 Libra Control Board with an internal rolling-code receiver.
• 2 TRC 2-channel rolling-code transmitters.
• 1 pair FL130 photocells and 1 SL433 antenna.

Product Description

Irreversible low voltage Residential swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft. Complete with eletronic torque limiter and magnetic limit switches. Designed for residential use and suitable for very restricted spaces. If the space between the gate and the fence is not enough, PHOBOS BT can be installed into a very small niche. The control board Libra includes an integrated rolling code receiver, self-diagnosis tracking and learning of statistical parameters. TECHNICAL SPECIFICATIONS: Voltage 24V; Motor revolution 3800 min-1; Power absorption 40W; Current 1.5A; Pushing and pulling force 2000N (400lb); Working stroke 11in (28cm); Rod speed 0.5 in/s; Impact reaction integrate torque limiter on Libra contorl board; Limit switches magnetic (adjustable); Manual release CLS release key; Degree of protection IP 44; Controller weight 50N (11lb) - (5kg); Lubrication permanent grease. ... Read more

Features

• Irreversible low voltage swing gate operator for up to 550lb (250kg), for gate lengths up to 6ft.
• Complete with eletronic torque limiter and magnetic limit switches.
• Designed for residential use and suitable for very restricted spaces.
• PHOBOS BT can be installed into a very small niche.
• The control board Libra includes an integrated rolling code receiver.

Product Description

Control panel suitable for managing one or two single-phase operators with power up to 375-375 W, provided with torque setting. 2 and 4 step logic with automatic, semi-automatic and hold-to-run operation. Programmable delay on opening and closing for 2nd motor. A series of LEDs allows easy intervention in system checking. Function setting by means of dip switches. Lock holding and ram blow. Separate inputs for opening and closing. Two-colour traffic-ligth management function by means of the SSR4 accesory (optional). Input for pedestrian opening. Separate limit switch inputs for each single motor. Universal connection for radio receiver. Removable type terminal bar to facilitate installation and any maintenance or replacement. ... Read more

Features

• Control panel suitable for managing one or two single-phase operators with power up to 375-375 W.
• Povided with torque setting, with automatic, semi-automatic and hold-to-run operation.
• Programmable delay on opening and closing for 2nd motor.
• Separate inputs for opening and closing. Input for pedestrian opening.
• Two-colour traffic-ligth management function by means of the SSR4 accesory (optional).

Product Description

The SB Batery Kit device ensures, through its batteries and battery charger, low-voltage operation of the sliding gate when there is no power supply. ... Read more

Features

• The SB Batery Kit ensures low-voltage operation of the sliding gate when there is no power supply.

Product Description

In large and in much as individual installations, it is often necessary to add or eliminate transmitters stored in the receiver memory. To simplify this operation without giving up the rolling-code safety, BFT has created the new line of receivers with algorithm coding which can be cloned. With this type of device, any standard transmitter from the rolling-code line can be programmed, so as to be automatically entered in the memory of the receiver it has been programmed for. Thanks to this function, transmitters can thus be added to an installation without needing to go to the installation site. For installations where more than one receiver is present, the receivers and transmitters can be programmed in such a way that automatic programming only takes place on the receivers required. In the case where the installation database in available, it is also possible to replace a transmitter memorized therein with a new transmitter, still without needing to go to the installation site. ... Read more

Features

• Programming of clones by addition, programming of clones by replacement.
• Programming of clones with fixed code.
• Programming of the collective receiver (excluding receivers with standard algorithm).
• Update of the memorized code lists, whenever necessary.
• See other functions under Product Description

Product Description

Use this bird net covering to protect fruits, vegetables, berries, shrubs or flowers. Protects against deer, birds and other animals. Completely reusable and convenient with mesh size of .75 in x .75 in. ... Read more

Product Description

Use this 1,666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 1,666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Use this 666 ft reel of black 8 gauge deer fence monofilament wire at the top and bottom of your deer fence. The wire is UV stabilized to prevent breakdown from the sun and weather. Monofilament needs to be tightened with a Round Monofilament Tightner to provide the needed support for the fencing. ... Read more

Product Description

Protect seats from pets, dirt, dust, mud, wet clothes and more. Waterproof nylon fabric with urethane backing is comfortable in hot or cold weather. Universal-fit cover slips over seat in seconds and held is securely in place by double-stitched elastic. Ideal for trucks, vans and SUVs. Rolls up into self-contained storage cover and secures with Velcro® tabs. Machine wash. Not designed for use on seats with side air bags or integral seat belts. ... Read more

Features

• Gray

Product Description

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. ... Read more

Features

• Type: Screw
• Pin Size: 3/8in. x 1 7/16in.
• Diameter: 7/16in.
• Working Load: 3000 Lbs.

Product Description

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. ... Read more

Features

• Type: Screw
• Pin Size: 5/16in. x 1 1/4in.
• Diameter: 3/8in.
• Working Load: 2000 Lbs.

Features

• Type: Screw
• Pin Size: 1/2in. x 1 5/16in.
• Diameter: 5/8in.
• Working Load: 6500 Lbs.

Product Description

Totally forged for excellent grain structure without the built-in-stress. Black powder-coated finish. Pins are yellow zinc dichromate plated. U.S.A. ... Read more

Features

• Type: Screw
• Pin Size: 7/8in. x 3in.
• Diameter: 3/4in. li>Working Load: 13000 Lbs.
• Usable length: 3in.

Product Description

Thawzall"s cold weather management system is ideal for concrete curing. ... Read more

Features

• Provides proper method of temperature control
• Assists in concrete curing
• Emergency heating applications

Product Description

Suspension in backrest reduces jolts for greater relief from fatigue. Fore and aft adjustment, 5 7/8in.. Suspension stroke ±1 1/2in.. Adjusts to operator weight of 110 to 265 lbs. Backrest angle adjusts 15(degrees). Rugged black PVC cover protects padding. Lap belt not included. 8 7/8in.W x 19in.D x 19in.H. ... Read more

Product Description

Excellent for industrial and ag equipment. Contoured for comfort. Tough vinyl covering. Drain holes. Mounting patterns 8in. x 11 1/2in. and 11 1/4in. x 11 1/2in.. A=20in., B=22 3/4in., C=21 1/2in. ... Read more

Features

• Fits compact utility tractors, backhoes, skidsteer loaders, forklifts and mowers
• Thickness of seat cushion: 2 1/2in.
• Seat is contoured and measures: 4 1/2in. in middle and 5 1/2in. on edges
• Back measures: 22in. to the top

Features

• 12 gauge, tempered steel blade for greater strenght and long service life.
• sharpened blade edges penetrate ground easily, slices through small roots
• Square-to-round connection between head and handles prevents twisting
• 48" thick ash wood handles for greater durability, long service life, and more relaxed grip

Product Description

30 x 12 4-pitch drilled galvanized iron rack with support. Per 13.12 ft.(4 meters). ... Read more

Features

• 30 x 12 4-pitch drilled galvanized iron rack with support.
• Length: 13.12 ft.(4 meters).