Features

• Can be used in garage, work place, basement
• 330-pound capacity
• 29-by-19-inch platform with vinyl wrap-around bumper
• 4-inch steel casters; 2 fixed and 2 swivel
• Fold down handle for easy storage, 31-inch handle height (top to floor)

Reviews (1)

Too small for much
I like the idea of a flat-folding utility cart that is easy to store and handles a lot of weight. However, when I received it, I found it really too small to carry much. I wanted to use it to carry my 3-legged Rottweiler when she gets tired on walks; I was hoping that her butt could stick out the back end. The handle bar takes up some of the cargo space in the back of the platform, which makes it even smaller. I discovered that the manufacturer, Sisco, also makes a DC-200 model which is larger and more feasible (36 x 24), but finding the manufacturer was quite a challenge. I found only their address through the Superpages.com, which was noted as a different city vs. the instruction/assembly page (Rancho Dominguez).

In case you need their contact info:

Sisco Inc.
2945 E. Maria Street
Compton, CA 90221-5801
(310) 638-1182

I suspect they may be out of business as I tried a reverse lookup on the phone number, and Smartpages.com said it didn't exist. I'll try writing to them to try and find the larger size and see if I get a response.... ... Read more

Product Description

Gray plastic, professional-grade containers will not rust, chip or peel; resist dents. Built-in handles allow easy, nonskid lifting and anti-jam nesting. Strong, snap-on lid allows for secure, stable stacking. Easy twist-on, twist-off dolly provides safe mobility. Casters on dolly are nonmarking. Lids sold separately: 32 Gallon RUB263100GY, 44 Gallon RUB264500GY. Brute Dolly sold separately: RUB26400BK. ... Read more

Features

• Gray plastic, professional-grade containers will not rust, chip or peel; resist dents.
• Built-In handles allow easy, nonskid lifting and anti-jam nesting.
• Strong, snap-on lid allows for secure, stable stacking.
• Easy twist-on, twist-off dolly provides safe mobility.
• Casters on dolly are nonmarking.

Product Description

Brute® Tandem Dolly
For efficient dual collection of recyclables and general waste. Holds two Brute® containers (not included) in mixed and matched colors and sizes. Heavy-duty 8" wheels and four swivel casters afford easy mobility. The dolly unit folds upright for space efficiency. 20-1/4w x 45d x 8h.
Black ... Read more

Features

• Black

Product Description

Stack Chair Cart
Heavy-duty steel dolly easily supports up to 15 Apia (SAF4187 Series) or Contour Stacking Chairs (SAF4185 Series), all sold separately. 3" casters for easy mobility. Durable Black powder coated finish. 23w x 23d x 4-1/2h. Shpg. wt. 25 lbs. ... Read more

Product Description

Chair Truck for HON Stackaways Seating
Transports up to 12 Stackaways chairs (HON10014 Series), sold separately. Chrome-plated two-wheeler. 18-1/2w x 33d x 49h. Shpg. wt. 26 lbs. ... Read more

Product Description

The Coats 4300 is an affordable unit designed for smaller fleets and tire shops. It is also an excellent choice for a second machine in busy shops. Simple design is easy to use. For disc style wheels only. Very gentle on over-the-road tires and tubeless tires mounted on aluminum wheels. Two composite rollers mount and demount tires. Handles rims from 16" to 24.5" and tires up to 20" wide.* *Optional accessories required for 16.5" and smaller wheels. Specifications: Electrical Requirements 220v 1Ph 1.5HP Hydraulic Motor (Additional voltages available) 1HP Chuck Motor Air Requirements None Min/Max Wheel Diameter** 16" to 24.5" Maximum Tire Diameter 47" Maximum Wheel Width 20" Tire Types Tubeless Shipping Weight 726 Lbs Warranty Limited 12 Mos. Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. FREE shipping to any business address in the continental USA. ... Read more

Product Description

These heavy duty changers can accommodate tube or tubeless tires with rim diameters from 15" to 44". Easy-to-use swing-arm houses all hydraulic controls, with a dedicated lever for each powered function. Self-centering hydraulic clamping chuck . Adjustable pressure regulator ensures proper matching of chuck pressure to rim strength. Heavy, tapered roller bearings, and a dual direction hydraulic motor provide smooth torque. Roller-type tire spreader standard. Specifications: Electrical Requirements* 220v/1Ph 60Hz (Additional Voltages available) Air Requirements None Min/Max Wheel Diameter 15" to 44" Maximum Tire Diameter 83" Maximum Wheel Width 40" Tire Types Tubless Tube Type Shipping Weight 1600 Lbs Warranty Limited 12 Mos. Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. FREE shipping to any business address in the continental USA. ... Read more

Product Description

The Model 9500 has many of the features of our Model 9500R, and handles rims from 14" to 56" in diameter and tires up to 43" wide. Hydraulic tool carriage for positioning, bead loosening, mounting, and demounting procedures. Spreader-type chucks ensure secure clamping of virtually all rims, including de-mountable, reverse disc, standard disc, and off-road style wheels. 24 volt remote control with patented 8-way switch allowing multiple simultaneous functions. Floating jaws to match wheel contours for excellent gripping and safety. Massive 5" chuck spindle to handle the heaviest loads. Mount/Demount arm hydraulically rotates, raises, and lowers with a push of a switch and features dual locks when lowered for use. Specifications: Electrical Requirements* 220v/3Ph Hydraulic Motor 220v/3Ph 3-4 HP Chuck Motor Air Requirements None Min/Max Wheel Diameter 14" to 56" Maximum Tire Diameter 90.5" Maximum Wheel Width 43" Tire Types Tubeless Tube Type Shipping Weight 2082 Lbs Warranty Limited 12 Mos. Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. FREE shipping to any business address in the continental USA. ... Read more

Product Description

These heavy duty changers can accommodate tube or tubeless tires with rim diameters from 15" to 38". Easy-to-use swing-arm houses all hydraulic controls, with a dedicated lever for each powered function. Self-centering hydraulic clamping chuck . Adjustable pressure regulator ensures proper matching of chuck pressure to rim strength. Heavy, tapered roller bearings, and a dual direction hydraulic motor provide smooth torque. Roller-type tire spreader standard. Specifications: Electrical Requirements* 220v/1Ph 60Hz (Additional Voltages available) Air Requirements None Min/Max Wheel Diameter 15" to 38" Maximum Tire Diameter 76" Maximum Wheel Width 34" Tire Types Tubeless Tube Type Shipping Weight 1400 Lbs Warranty Limited 12 Mos. Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. FREE shipping to any business address in the continental USA. ... Read more

Product Description

The Coats Model 6000 tire changer is designed for servicing tubeless tires. It can change tubeless truck tires in a matter of minutes without the use of adapters, as well as loosen tube-type tire beads. Handles wheel widths 6" to 15" and diameters of 16.5" to 24.5". Changes all 15-degree single-piece highway rims, including demountable Dayton wheels, reverse disc Budd wheels, and standard disc wheels. One control stick for pivoting the tabletop and clamping the rim chuck. Bead loosening, mounting and demounting are activated by dedicated two-way pedals. Specifications: Electrical Requirements 220 V/3PH 3HP/25A 220 V/1PH 3HP/45A Air Requirements 110-175 PSI Min/Max Wheel Diameter 16.5 to 24.5 Maximum Tire Diameter 44" Maximum Wheel Width 15" Tire Types Tubeless Only Shipping Weight 1150 Lbs Warranty Limited 12 Mos. Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. FREE shipping to any business address in the continental USA. ... Read more

Product Description

Gojak operates on the principle of a quick action, double pawl, bi-directional ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between two rollers until the tire lifts smoothly of the ground. The rollers touch only the tire no contact with the vehicle's frame or undercarriage is necessary. The low centre of gravity after lifting helps make GOJAKS safe and stable in use. Its purely mechanical design eliminates the need for electrical power, hydraulic elements, or compressed air. Lifts tires up to 23cm wide. Fits wheel size 13" to 16" wheels. A complete system of 4 units (2 pair) has a 5,000lb capacity. Price is for a pair of Gojaks. Availability: In stock Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

Gojak operates on the principle of a quick action, double pawl, bi-directional ratchet. Mechanical leverage applied to the foot pedal progressively "squeezes" the vehicle tire between two rollers until the tire lifts smoothly of the ground. The rollers touch only the tire no contact with the vehicle's frame or undercarriage is necessary. The low center of gravity after lifting helps make GOJAKS safe and stable in use. Its purely mechanical design eliminates the need for electrical power, hydraulic elements, or compressed air. Lifts tires up to 32cm wide. Fits wheel size 13" to 16" wheels (overall tire diameter 35"). A complete system of 4 units (2 pair) has a 6,000lb capacity. Price is for a pair of Gojaks. Availability: In stock Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

Convenient storage cart holds up to 4 Gojaks (fits all models). Loads and unloads in seconds. Rolls easily to job or storage area. Gojaks NOT Included. Availability: In stock Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

GuestStacker Cart
Holds up to 28 GuestStacker chairs and fits through a standard 6'8" door. Steel, Black finish. Heavy-duty front wheels, rear swivel casters. 21-3/8w x 35-1/2d x 37-7/8h. Shpg. wt. 40 lbs. Assembly required. ... Read more

Product Description

4" heavy duty swivel wheels (two locking) for easy mobility of vehicles. Fully welded all steel frame for rugged dependability. Sold by the set (two dollies). Each dolly holds 1200 lbs. Made in the U.S.A. Availability: In stock. Usually ships within 24 hours. Ships via UPS. ... Read more

Product Description

1 ton capacity wheel dolly is designed for the removal and installation of single, tandem and duplex tires and wheels. Rear swivel caster wheel and rigid front wheels provide positive steering for the model 82300C. Swivel caster wheels both fore and aft provide side to side maneuverability for the model 82301C. Wheels with polyurethane tread protect floor. Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations. Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. Lift arms supported at both ends minimize wheel movement. Adjustable height push bar provides unobstructed access to hub area. 3-1/4" travel adjustment on rear caster wheel matches lifting arms with spindle angle. Specifications: Capacity 1 ton. Width 44-1/2" Length 50-1/2 Height 39" Lift Bed 22" to 26" x 24-5/8". Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. Please call 866-943-7524 for shipping estimate. ... Read more

Product Description

1 ton capacity wheel dolly is designed for the removal and installation of single, tandem and duplex tires and wheels. Rear swivel caster wheel and rigid front wheels provide positive steering for the model 82300C. Swivel caster wheels both fore and aft provide side to side maneuverability for the model 82301C. Wheels with polyurethane tread protect floor. Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations. Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. Lift arms supported at both ends minimize wheel movement. Adjustable height push bar provides unobstructed access to hub area. 3-1/4" travel adjustment on rear caster wheel matches lifting arms with spindle angle. Specifications: Capacity 1 ton. Width 44-1/2" Length 50-1/2 Height 39" Lift Bed 22" to 26" x 24-5/8". Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. Please call 866-943-7524 for shipping estimate. ... Read more

Product Description

1/2 ton capacity high lift wheel dolly is designed for the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level. Heavy duty lift arms made with ball bearing conveyor rollers which allow easy rotation of wheels for alignment with bolt pattern. 7-1/2" of side-to-side lift arm adjustment eliminates the trial and error method of aligning the rim's lug holes with the wheel drum. A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation. The winch gear design acts as a brake and allow the load to be lowered incrementally if desired and without the need of constant hand pressure against the crank handle. A hydraulic jack tilts the lift arms in order to match the angle of the spindle. Safety chain provided to secure tires and wheels to the dolly. Maneuverability is made easy by means of two rear mounted ball bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving. Specifications: Capacity 1/2 ton. Lift Height low 3" and high 41-1/4". Lift Arms width 24-1/4", length 21", tilt angle -2 to +30 degrees. Side to Side Adjustment, left 3-1/4", right 4-1/4". Overall Length 45-3/4", Width 43-3/4", Height 62". Support Leg Clearance 6-1/4". Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight ... Read more

Product Description

1/2 ton capacity lift/tilt wheel dolly is designed for the removal and installation of single, tandem and duplex tires and wheels. Wheels with polyurethane tread protect floor. Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations. Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment. Lift arms supported at both ends minimize wheel movement. Adjustable height push bar provides unobstructed access to hub area. 3-1/4" travel adjustment on rear caster wheel matches lifting arms with spindle angle. Patented tilt design positions wheel at 45 degree angle for easy wheel bearing installation and waste oil removal. Wheel inspection made easier at 45 degree tilt angle. Four 4" diameter swivel caster wheels for easy positioning. Specifications: Capacity 1/2 ton. Width 41" Length 50-1/2 Height 33-3/4" Tilt Angle 45 degrees. Lift Bed 22" to 26" x 24-5/8". Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. Please call 866-943-7524 for shipping estimate. ... Read more

Product Description

Norco 1500 LBS Capacity Wheel Dolly. Designed for the removal and installation of single, tandem and duplex tires. Dolly handles any tire diameter and up to 1500 lbs. combined tire and wheel weight. Three 4" diameter swivel ball bearing caster wheels provide easy maneuverablility and positioning. 3-1/4" travel adjustment on rear locking caster wheel matches lifting arms with spindle angle. 6' chain included to secure wheel assembly to during removal and transport. Specifications: Capacity 1500 lbs. Lift Travel: 4-3/4". Lift Arms spread 26", Length 28". Overall Length 44", Width 41", Height 32". Availability: Drop ship from factory. Usually ships within 3-4 days. Ships via Truck Freight. Please call 866-943-7524 for shipping estimate. ... Read more