Product Description

Dependable general purpose drill suitable for a wide range of materials. Bright finish provides excellent chip exacuation. Recommended for both ferrous and non-ferrous materials. ... Read more

Features

• Drill Diameter: .5312", 17/32".
• Overall Length: 6-5/8".
• Overall Length (inch): 6-5/8.
• Material: High Speed Steel.
• Drill Diameter (inch): 17/32. Cutting Direction: Right Hand.

Features

• For all types of construction
• Large, wide throat design
• Self-feeding screw point
• Diameter 2 1/8 in.

Product Description

Drill perfectly centered pilot holes for mounting hinges, brackets and hardware. High speed steel bits are replaceable and can be adjusted for depth. Five-piece set includes sizes: .250, .281, .312, .374 & .438. ... Read more

Features

• Easy carry case
• 10 piece quick change system
• 1/4" hex adaptor
• 4 counter sink inserts
• 5 1-inch insert bits

Features

• Quick change bit system for fast, one-handed load and release
• Change bits without re-chucking

Reviews (4)

Bosch clic change system is fortunately a standard
The Bosch clic change also has a very intuitive method of working. Inserting a new bit into it is easy. The bit goes in and in the same movement, you continue right over the bit to the head of the clic change system, seating it down and locking it. When you want to remove the bit, you pull the head outwards, and once again in a single stroke remove the bit at the same time. Leave it to Bosch to make on of the best designed systems.
The good thing about the Bosch is that it accepts 1/4" head bits from a lot of different manufacturers available locally.
I also bought the Bosch 27 piece clic change set with this one, and then discovered the wide array of 1/4" devices with the same head configuration.
All in all, the Bosch holds the bit very true and won't slip out. Yet the bits come on and off easily. Very nice unit, highly recommended.

Best Quick-Change adapter on the market
I purchased a different kit than the one listed. Mine had the Quick-Change adapter with 7 hex shank high-speed drill bits. The drill bits are of excellent quality as is the click adapter. All you have to do to insert a bit is push it in. To remove it simply pull back on the padded collar of the adapter and the bit pops out. Unlike Sears, Dewalt, Snapy and other quick adapters that I have used you do not have to pull back on the adapter and pull the bit out at the same time. The Bosch just pops it out. What impressed me the most however was the lack of run out that the Bosh has. The wobble that is present at the driver bit or drill bit tip that anyone who has ever used any sort of quick change hex shank adapter is much less noticeable with the Bosch than any I have ever used. I am a solid surface/laminate fabricator and much of my time is spent installing counter tops and kitchen cabinets where a drill is indispensable for drilling as well as driving. I have 3 of the Bosch Quick-Change adapters one in a Makita, one in a Dewalt, and one in a Metabo cordless drill. I would not be without one of these Bosch adapters on the work site. By the way I also use a Dewalt 7.2v screwdriver which is a pleasure to use and comes with a hex shank quick adapter mounted to the drill shaft instead of a chuck and it has more run-out than these Bosch adapters.

The best quick change device
I have several types of quick change devices including Sears,
Dewalt and Bosch. The Bosch unit is by far the quickest to use.
You don't have to overcome the spring that others have. Just a simple click open and, after you insert the bit, click shut and you are through. It is truly a one hand operation. The best I've found.

great idea
like many people, my drill driver is getting harder and harder to change bits in. I was about to get a new drill driver when I saw this quick change product. It is awesome and actually makes my drill driver better than new. ... Read more

Features

• 1/2"
• 1/4" round shank

Features

• Tungsten carbide
• Hardened steel annealed
• Double flute design gives quicker dust extraction/faster drilling
• One year warranty, One year service contract, 30 day no-risk trial

Product Description

mfg by: BLACK & DECKER (U.S.) INC POWER SCREWDRIVER BITS Shock-resistant tool steel for max durability Hardened core for extra strength & long life Heat-treated to resist breakage & weat Size= length x bit description DW2262 #2 SQ REC 6 POWER BIT 6"x#2 Sq.Recess 1 per card ... Read more

Product Description

mfg by: BLACK & DECKER (U.S.) INC INSERT BIT TIP Shock resistant tool steel for longer life Snub nose design for ideal fit Advanced hardening process for max. durability Length: 1" DW2202BL #2 SQ RECESS BIT TIP #2 Sq. Recess Bulk ... Read more

Features

• Heat resistant cobalt
• 3/16 inch thick steel back
• Aggressive cutting 4/6 tooth design
• 1 1/2 inch cutting depth
• Hole diameter 2 3/8 inch

Features

• This 10pc drill bit set contains the most popular range of drill bit sizes 1/16" to 1/4"
• It is organized by a handy bit bar that makes storing this set in any tool box or kitchen drawer easy

Product Description

Bosch PC114 1-1/4" Bi Metal Power Change Hole Saw ... Read more

Product Description

X-OUT(R) is designed to remove damaged or rounded-head screws. It plows onto the head of the screw and turns the screw out with the power of a hand drill. Just chuck the X-OUT(R) into a standard 3/8 inch varible speed power drill, and set for reverse mode. Removes #6-#12 screws. (USA) ... Read more

Features

• 1/4" Quick bit compatible
• Remove damaged screws quickly and easily
• Reusable
• No drilling required
• Chemical and gunk free

Features

• Lasts longer
• Shock resistant tool steel for maximum durability
• Hardened core for extra strength and reduced breakage
• Heat treated to resist breakage and wear
• One year warranty, one year service contract, 30 day no-risk trial

Product Description

49-56-0241

5in Hole Saw

Milwaukee's Heavy Duty 4/6 Hole Saws feature a multiple tooth design with varying tooth sets and gullet depths. The deeper gullets provide more efficient chip clearance with less heat build up thus requiring lower feed pressure, ideal for high RPM portable drills. These Hole Saws are constructed with a minimum 3/16 inch thick steel back resulting in a more durable, longer lasting hole saw. Made of Bi-Metal construction, the high speed steel teeth are electron beam welded to the high alloy steel body. Containing cobalt, the teeth are ideal for both wood and metal applications. Milwaukee Hole Saws provide an economical means of creating up to 6 inch holes for the general construction, plumbing, electrical, maintenance and remodeling industries. Select proper arbor size depending on the drill being used. One per package. ... Read more

Features

• Similar cobalt sets available for almost every drilling application
• 8-percent cobalt high-speed steel construction for superior abrasive resistance in tough metals
• 135-degree split point reduces feed pressure for faster drilling
• Durable rubber-sided case for added impact resistance, convenient storage and longer bit life
• Case has sliding latch that prevents spilling, and a rubberized grip for easy handling

Features

• Rapid-Feed tip pulls bit through wood and reduces pressure necessary to drill a hole
• Cutting spurs score outside of hole to reduce splintering

Reviews (1)

Very helpful bits
These bits are very impressive, they will drill through wood basically on their own-but expect a bit of a blowout on the other side of the board. I am not a wood worker so concerns on cosmetics are not too common. As an electrician these spades cut faster, self feed easier and finsh better than any other I have tried. Of course you get what you pay for and these are worth every penny to me. If I may also add-they cannot take much contact with plaster or stone resulting in a very quick dull, you literally do not have to push on these bits resulting frankly in less injuries down the road! ... Read more

Product Description

Bosch PC3 3" Bi Metal Power Change Hole Saw ... Read more

Features

• For light chipping and chiseling of tile, mortar, glazing compounds and other masonry products
• 12" Bull Point chisel
• One year warranty, one year service contract, 30 day no-risk trial

Features

• Use with #714114-A Counter bore kit for drilling and counter boring in one action.
• Specially designed for Sidewinder drills - rated at 1,200 rpm
• Molybdenum Coating works as a dry lubricant to reduce heat and friction.
• Heat treated to blast through tough nails.
• 18" for deep boring applications in telephone and power poles, docks, bridges and large timber.