Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 1" diameter, 11" useable length, 16" overall length

Product Description

This 50 piece drilling and screwdriving set features the most popular sizes in one carrying case. Drills clean, accurate holes in metal, wood and plastic surfaces. Includes: ... Read more

Features

• Includes an assortment of drilling, screwdriving and nut driving accessories
• Storage case included

Reviews (1)

strong and reliable
I am always using my drill and have a lazy habit of not drilling pilot holes, but using the driver bits to drive screws into 2x4s straight from the drill. I have stripped the screw slots on galvanized screws, but these bits don't even have a scratch on them - AND they can pull the damaged screws right back out of the wood.

Just about every drill bit and screwdriver attachment the regular hobbyist will ever need, in an easy to use case w/ snap-in slots for each bit and driver and the case keeps moisture away from your bits. ... Read more

Amazon.com Product Description

The Shopmaster DP400 is a home woodworker's dream--it has all the details of a professional-grade drill press without the cost. The chuck-to-table depth of 27 inches will be the envy of your neighborhood, allowing you to drill into the longest work pieces. You'll get to the center of a 16-1/2-inch board with no trouble at all, and a generous 3-3/8-inch stroke means you won't have to keep readjusting the table. Even when you do, it's a breeze with Delta's smooth rack-and-pinion mechanism. The table measures 12 inches square and tilts for angled drilling. No matter what you're drilling into, one of the 12 speeds--from 250 to 3,000 rpm--will be right for your material. Have some repetitive drilling to do? The adjustable-position locking depth stop will take the trouble out of the job. You're open to a broad range of bits with this machine, as its chuck will accept bits up to 5/8 inch. The built-in gooseneck lamp lets you position this drill press anywhere in your shop, and you'll always have great task lighting. When you're done drilling, just pop out the removable safety switch to prevent unauthorized use. --Kris Jensen-Van Heste ... Read more

Features

• 2-year limited warranty on machines, parts, and accessories
• 3/4-horsepower induction motor for powerful, smooth drilling action
• 0-5/8 inch chuck capacity for use with a variety of drill bits
• 12 spindle-speeds--250 to 3,000 rpm--for drilling a variety of materials
• Table tilts up to 45 degrees for accurate angle drilling

Reviews (1)

Good drill press
I've had this drill press for about a week now, so this is a fairly brief review. I bought this particular version from a local large home supply establishment. Overall, I'm pretty happy with it.

I carried it home in a VW New Beetle, so it's a manageable package. It came well packed in a sturdy cardboard box lined with foam. I and took it downstairs in pieces, since the whole box is near 180 pounds. It assembled quickly. There are really only 4 parts; the base, the support post, the table, and the motor and belt head. The hardest part was cleaning off the packing grease -- I used kerosene -- and then waxing all the bare metal parts with paste wax.

I measured the runout with my admittedly less than high quality dial indicator and a spare mill bit in the chuck and came out with around .0018" I haven't done any real heavy cleaning of the chuck assembly so there could be some grit or packing gunk inside.

Speed changes are easy by moving a small lever and loosening a thumbscrew. The only thing I'm less than completely happy with is the table assembly. It uses a rack and pinion to raise and lower the table. The rack is held against the post by just a ring up top and it fits into the base at the bottom. There is no support along the length of the rack so there ends up being quite a bit of play in the middle of rack where it sags out away from the post. As a warning to overly harsh treatment, the rack on the display model at the store was severly bent. Also to angle the table, you have to get under it and pull a pin. I haven't tried that yet, but it could have been made easier.

I did try angling the table last night. To me it's a pain, but I don't know how common this method is. You have to remove the pin, which comes out with the use of a wrench, and then loosen a big bolt that holds the table. The bolt is hard to get to being between a couple of reinforcement webs and is large. I think it's a metric just smaller than 15/16". I used a 15/16" socket and it was a little loose, while 7/8" was too small and I don't have a 31/32" wrench to try and my metrics only go up to 17mm. I did see a quick release bolt in another catalog for drill presses that might work. ... Read more

Product Description

When this drill press arrives at your door, you're gonna say "Holy Moley!". The MT#4 spindle taper, 1 1/2 HP motor and precision ground T-slotted table will handle just about any drilling job. Includes built-in light (bulb not included). ... Read more

Features

• Approx. shipping weight: 312 lbs.
• Drill chuck: 5/8"
• Motor size: 1-1/2 HP, Single-Phase
• Range of speeds: 210, 310, 400, 440, 630, 670, 1260, 1430, 1650, 2050, 2350, 3300 RPM
• Swing: 20"

Reviews (2)

A lot of machine, but a lot of hassle
After much research and deliberation between the Jet, Delta, and Grizzly, I opted for the extra muscle of the Grizz. I received my drill 7 hours after the window for delivery that was given to me, and frankly, it looked like a bomb had gone off inside the box. The top of the box was not even attached. As the delivery guy was removing it from the truck, the head assembly and column were literally falling out of the package. I declined acceptance of the package. I called Grizzly the next day, and they seemed genuinely concerned, but it took another 10 days for me to receive my drill (when 3-5 days was promised). Once I finally got my drill press in good condition - the second time - I was impressed. It is an absolute behemoth. It is so much more machine than the Delta and Jet. There is A LOT of metal in this machine. It took me and another guy everything we had to get the head on the column. Once assembled, I was impressed with how quiet and stable this 1.5 hp beast ran. While assembly was rather straight forward, I was very unimpressed with the manual. It was dated, and did not reflect many of the updates to the drill press. It had very little on the operation and different speeds of the machine. I called Grizzly and pointed this out, and all they could tell me was that the manual had not been updated. All in all, this is one beefy machine, and I am very impressed with the operation. I really wish that Grizzly would pay more attention to some of the details though, like shipping, customer care, and the manual. I like this tool a lot, but I will think twice now before dealing with Grizzly again.

20" drill press
This 20" drill press will last for years. It is the lowest priced 20" drill press on the market. Not the cheapest. G's service is great. I have needed parts for the G machines I own and they have sent them free with no charge. I have a small proto type shop and I use this drill press for metal drilling. It works great. Of the 74 machines I own 7 are Grizazly and I would buy them again. ... Read more

Features

• For use with electric or cordless driver-drills
• Prevents screws from wobbling while inserting or removing
• Uses standard Phillips and slotted insert bits
• Overall lengths: 3-1/8" and 4-5/8" (without bit)

Product Description

These quality carbon steel cutters make smooth sided plugs with rounded shoulders. Protected in a wooden case, these straight and tapered plug cutters include 1/4", 3/8", 1/2" and 5/8" diameter sizes. ... Read more

Features

• For breaking concrete to a line, also used when channeling for pipe or conduit
• One-year warranty, one-year service contract, 30 day no-risk trial

Amazon.com Review

Sure, it's frustrating when the head breaks off a bolt or screw, but with the Alden Drill Out power extractor kit, help is on the way. Each Drill Out is a drill bit and extractor in one and is specially designed to drill into the rough surfaces caused when bolts break. To use, simply insert one of the four Drill Out sizes (1/4, 5/16, 3/8, and 1/2 inch) into a reversible power drill, place the tip directly over the center of the broken bolt, and then follow the included instructions for extracting the bolt or screw. The Winslow self-centering tip keeps the bit tip from walking or wandering. The Drill Out kit also offers a unique left-hand cutting edge, which helps loosen and sometimes even turn the bolt out during drilling. Don't let a broken bolt make your job any harder--add the Drill Out power extractor kit to your arsenal. --Rivers Janssen ... Read more

Features

• Winslow self-centering tip will not walk or wander
• Kit contains 1/4-inch (6 mm), 5/16-inch (8 mm), 3/8-inch (10 mm), and 1/2-inch (12 mm) power extractors
• Designed to drill into the rough surfaces caused when bolts break
• Drills up to grade 8 bolts
• Warms up the broken bolt, easing the extraction process

Product Description

110V AC, 750 Watts, 60 Hz. Draws 14.3 Amps starting, 7.8 Amps no load. Pushbutton on/off; automatic oil pump. Triple filtering; adjustable oil quantity. UL listed 54in., 18-gauge, 3-wire grounding plug. 25in.L x 16in.W x 17 1/2in.H (36in.H with legs) overall. Truck Ship. ... Read more

Features

• 1 HP single-phase motor operates at 3400 RPM
• Threads pipe at 26 RPM; includes 3 threading die sets

Product Description

Chicago-Latrobe 57728 115pc Jobber Length Drill Set 1/16" - 1/2" x 64ths; A to A; and 1 to 60 complete with a metal index case. Black oxide surface treated finish that provides abrasion resistance and improved chip flow. Style 150. This drill set has 118 degree point and can be used for a wide variety of drilling applications.

Sizes: 1/16" to 1/2" x 64ths, A to Z, 1 to 60 Wire Gauge
... Read more

Features

• General purpose HSS drills with 118 degree points.
• Treated with black oxide finish for abrasion resistance and improved chip flow.
• Set includes metal case.

Features

• Pilot point tip starts on contact for greater accuracy
• Serrated titanium carbide tip
• Improved flute design
• One year warranty, One year service contract, 30 day no-risk trial

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Product Description

This Drilling and Driving Bit Set is almost more than you can handle! The brand new case, loaded down with over one-hundred bits is a smorgishboard of a tool man's dream. Many of the items have "Rapid Load" (or Quick Change) ends; perfect for impact drivers! There's also two removable Tough Case containers: One with Drill Bits, the other with Screwdriving Tips and accessories. Nothing says "I'm a tool man" like dozens and dozens of screwdriver tips and drill bits! Crafted from tough metals and coated with Black Oxide, these drill bits can withstand a beating. Here's a breakdown of the great items this contains: (1) Rapid Load Holder, (1) Clear Drive Guide, (1) Compact Drive Guide, (3) Drywall Dimplers, (1) 1/4" Nutdriver, (1) 5/16" Nutdriver, (16) Drill Bits of various sizes, (100+) Varisous Screwdriver Bits ... Read more

Features

• 130 Piece Drilling and Driving Bit Set
• 16 Drill Bits / 100+ Screwdriver Tips / 2 Nutdrivers / 3 Drywall Dimplers / 2 Drive Guides & 1 Rapid Load Holder
• Heavy Duty Kit Box with expansion spaces and Metal Latches
• Brand New / Never Used
• 2 Removable Tough Case containers

Product Description

Titanium nitride coated bits last up to six times as long as uncoated bits. 29-piece set includes bits ranging from 1/16" to 1/2" in increments of 1/64". 115-piece set features 29 fractional bits from 1/16" to 1/2" in increments of 1/64", letter bits from A to Z and 60 number bits. Housed in rugged steel cases. ... Read more

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Features

• Full lifetime warranty
• Single-spur design
• Coarse screw point
• Full length heat treatment
• Solid center design

Reviews (1)

well worth the price
I have had several sets of auger bits that only lasted a few uses before becoming so dull they wouldn't drill at all. These bits are great. A little more expensive, but worth it if you use them a lot. ... Read more

Features

• Peels away frozen ground in layers

Features

• Quick Change
• 28 piece set
• Compact carrying case
• 1/4" drive
• Screw Guide

Features

• Reusable
• Grabit makes it easy to extract No. 6 to 14 damaged screws
• Can be used in a variable speed reversible drill, 1/4 inch hex screwdriver, and 1/4 inch quick connect system
• Works with most screw types, including Hex, Torx, Square Drive, Phillips, and Tamper Proof
• Extracts damaged screws made of most any alloy

Product Description

Because of its resistance to heat and stress, Cobalt Alloy bits turn faster without overheating. The 135 DEG split point enables the drill to use less thrust and eliminates the tendency of the drill point to walk which makes these great for use in portable drills or drill presses. Cobalt Alloy bits will retain their edge sharpness longer than normal HSS bits, resulting in a significant saving of time and money in the workshop. We've assembled some fantastic money-saving sets here. All sets include a heavy-gauge steel index case for storing. ... Read more