Features

• For use when installing electrical ground rods
• One year warranty, one year service contract, 30 day no-risk trial

Product Description

Complete set of tin Coated Brad Point Bits from 1/8" to 1/2" by 64ths. tin coating provides long-lasting sharpness and increased customer satisfaction over other types of bits. Packaged in a steel index. ... Read more

Features

• For removing heavy tile, stucco and imitation stone, and brick facades, as well as concrete splatter
• One year warranty, one year service contract, 30 day no-risk trial

Features

• 3/8-inch capacity for creating 3/8-inch wide mortises
• Select Steel for long-lasting sharpness--Made in Austria
• Fits Delta 14-650 Hollow Chisel Mortiser, 17-935 and 17-924 Mortising Attachments for versatility
• Accepts diamond knockout blades

Product Description

Developed for commercial use, this safety shielded rotary planer mounts on your drill press. The 3 1/8" dia. planer uses three high speed steel cutters to surface plane, cut tenons, rabbets, raised panels, tapers and more - with little or no chance of grab or kickback. Kit includes a special grinding wheel and 12-page manual. ... Read more

Product Description

Our Drill Press Collector is one of the handiest accessories ever for the drill press. If you use your drill press to drum sand this is a must. ... Read more

Features

• Fits most all standard table and floor model Drill Presses.
• Kit includes; 1ea. Tapered Nozzle $6.99 value
• 1ea. 12" Loc-Line hose $15.99 value
• 1ea. UHMW Mounting Bracket $15.99 value
• 1ea. 2" Hose Fitting $4.00 value

Product Description

Milled from a solid steel blank, these Grizzly® carbide-tipped, 1/2" shank rosette cutters make crisp rosettes in most hardwoods and softwoods. Please note, although these cutters look like oversized router bits, they are too big for normal router speeds and are designed for use with your variable speed drill press or lathe. ... Read more

Features

• Lasts longer
• Shock resistant tool steel for maximum durability
• Hardened core for extra strength and reduced breakage
• Heat treated to resist breakage and wear
• One year warranty, one year service contract, 30 day no-risk trial

Features

• Industry recognized as superior quality
• Contains sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1" in a Wooden Box
• All sizes fit 3/8" chuck or larger
• You can expect 300 - 500 holes between sharpenings
• Using Recommended speeds guaranteed not to burn

Features

• Includes 13 spade bits up to 1-1/2"
• Flexible storage case included

Features

• Eliminate driving plates and prevent drive pin holes from elongating
• This handy kit covers most everyday hole drilling needs
• Super tough bi-metal, 3/16-inch thick
• Teeth electron beam welded to a steel body
• Less vibration/shatter resistant

Features

• Drill, countersink and counterbore in one step
• Four-cutter countersink and tapered drill bit provide superior speed
• One year warranty, One year service contract, 30 day no-risk trial

Reviews (8)

YOU GET WHAT YOU PAY FOR...
These bits do a great job. I'm about to buy spare drill bits for the set. True, there are cheaper versions. I've destroyed several. The "cheaper" versions have set screws that strip out quickly, or spin because you can't tighten them enough.

Great but expensive
Somewhat of a funky taper on the drill bits, but they work well. Not as adjustable (drill bit length) as I thought or as the packaging would lead you to believe. Finally, these are many times more expensive than some of the cheaper countersinks out there. If you have a "serious" need for countersinking, then this is a good set.

Versitle Drill bits
I had an opportunity to purchase and use a set of these tapered countersink bits on a job where we had hundreds of countersunk pilot holes to drill. I used a drill bit stop placed on the shaft of the countersink to regulate the depth. They performed flawlessly. I later used them to pre-drill holes in plexiglass by turning the countersink around backwards and using a rubber washer as a cushion. I am a believer in using the right tool for the right job. I haven't ever seen any better bits of this type from any other vendor. *****

Makes woodworking much easier!
I bought thes bits in july as replacments for my broken crafstman bits...it makes fastening cabinets ten times quicker .instead of havin to change bits everytime it drills and countersinks all in one pass!i recommend this to any woodworker hobbiest or pro.

Great set up
These bits with the countersink set up work great. The countersink can be adjusted to compensate for a shorter screw length. The set of three is under 25 bucks at both Home Depot and Lowes, so shop carefully. ... Read more

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 1/2" diameter, 8" useable length, 13" overall length
• Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 7/8" diameter, 16" useable length, 21" overall length
• Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 5/8" diameter, 16" useable length, 21" overall length
• Four chiseling faces and cutting edges double the chiseling action for more efficient drilling

Product Description

6" Overall Length. S + D Type Drill features a 1/2" straight shank. ... Read more

Features

• Size: 1 1/8"
• 1/2" Straight Shank
• 6" Overall Length

Features

• Carbide tipped bit head is harder, tougher, and more resistant to extreme loads
• 3/4" diameter, 18" useable length, 23" overall length

Features

• Four cutter heads reduce vibration for less user fatigue
• Double flute design gives quicker dust extraction and faster drilling
• Hardened core reduces breakage
• One year warranty, one year service contract, 30 day no-risk trial

Features

• One year warranty, one year service contract, 30 day no-risk trial
• Hardened core reduces breakage
• Double flute design gives quicker dust extraction and faster drilling
• 4-cutter head design reduces vibration for less user fatigue
• Concave head design allows dust to enter flute chambers quickly increasing bit life