Features

• Solvent Free & nonflammable
• 30 sec set time
• Fast set for quick assembly
• Reduces the need for clamping
• Ideal for general woodworking and cabinetry

Features

• Plain shank framing nails, clipped head
• Fits Bostitch n80s, n80b, n86s, and n100s
• 2,000 per box

Features

• Reduces need for mechanical fasteners
• 75 sec set time
• Versatile performance
• Longer open time for precise assembly
• Bonds most common materials

Reviews (1)

side by side comparison
i had to get a plastic curtain hung right away. i used this to attach several hundred feet of velcro stripping. it was ready for immediate use! i could attach and re-attach the velcro without worry. it never pulled off! when i ran out i used another brand epoxy glue which took until the next day to set. the gun heats up quickly. i have stored and re-used a tube without any problems. good to have available for rush jobs, etc. but not for every day. cost is the limiting factor, not performance. ... Read more

Features

• 1-inch finish nails
• 16 gauge
• 2,500 per pack

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 2-1/2" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Reviews (1)

SIZE MATTERS
THE ACCUSET 2 1/2" NAIL WAS PERFECT FOR NAILING DOWN MY SUB FLOOR
IN MY NEW DINING ROOM,ALSO I NEEDED TO HANG THICK WIDE CROWN MOLDING AND THIS ACCUSET NAIL WAS THE PERFECT SIZE FOR THESE JOBS..LET ME ALSO SAY THE FLOOR OR MOLDING AINT GOING ANYWHERE WITH THESE NAILS SECURING THEM DOWN ... Read more

Features

• Superior corrosion protection in all pressure treated lumber
• Full round head; 20% more nails per strip vs. plastic collated nails
• Weather resistant paper tape for safety and year round production
• 2-3/8" x .113 RS HDG Plus

Features

• Finish nails used for base boards, cabinets, crown molding, and fascia
• Package includes 700 1-1/2" finish nails per clam shell
• 15 gauge non-galvanized angled finish nail.
• Accuset fasteners backed by Senco against manufacturer defects

Features

• Plastic Collated
• 21 degree - Round Head
• Works in: N88RH & N88RH-2MCN

Features

• Solvent Free & nonflammable
• 60 sec set time
• Fills gaps and irregularities
• Reduces the need for clamping
• Ideal for general woodworking and cabinetry

Features

• Fits NV65AH & NV75AG
• 2-inch by .092 RG coil siding nail fits NV65AH, NV75AG, NV50AE and AN611 for continued high performance
• Electro-galvanized for reduced rust, a tight hold and durability
• Engineered for serious siding work
• 3,600 per box for extended jobs

Product Description

This general-purpose, medium strength threadlocker has improved oil tolerance for fasteners between 1/4" and 3/4" (6 to 20mm) diameters. 10 ml and 50 ml bottles. ... Read more

Features

• Color: Blue
• Temperature range: -65 degree F to 300 degree F
• Torque in lbs. (M10 steel nuts & bolts) break / prevail: 180 / 62
• Typical use: Up to 3/4" bolts with light oil contamination

Features

• Replace or add grommets yourself to tarps, tents, awnings, etc
• Solid brass 1/2" grommet kit with 48 grommets
• Includes setting tool with knurled body for greater comfort and safety

Reviews (1)

Work well for me.....
I have used these as well as the 2 and 2.5"in my bostich N62 finish nailer....They have worked without a hitch. Sometimes it is the "nailee" not the nails that have problems..... ... Read more

Product Description

This polyurethane glue is the finest available for bonding wood, stone, metal, ceramics, plastics and more. Gorilla Glue® is waterproof and features an open working time of 20 minutes or more, better coverage than other adhesives, a usable temperature range of 40° - 130° and a 1 â 4 hour cure time. ... Read more

Reviews (1)

GORILLA GRIP
I purchased this product by recommendation of a trusted hardware store owner to bond a loose plastic rain guard over the window of my GMC Sierra Z71 to the metal door frame. For six months I have tested the glue on various applications including wood, plastic steel, and aluminum in both land and marine environments.

This is a non-tacky liquid that requires only two things to make it work well using common sense methods to apply. Clamp/form where necessary and use water as a catylyst and bonding agent per instructions. I prefer giving the surfaces a light, fine spray of water with a good spray bottle.

A little goes a very long way. This is the most fascinating material since "aerogel". A little Gorilla will grow overnight, expanding, say, 399-400% at full cure into a final hard mass of structural air cells. Excess can be shaved or cut off and sanded, if required.

Other that the superb holding characteristics, the great wonder of this fluid polyurethane is its expansion capability to allow it to be used, also, as a filler/bonding material. I have a 12 ft. wide overhead garage door on my boathouse by-the-sea. On one horizontal section, where the glazing is stiled and railed, the wood around many of the hinge hardware has rotted. After removing the dust and fragments of the dead wood fibers, substantial areas of irregular shape remained void of any material. This poor condition makes it difficult to install new hardware and to find a surface to paint.

The solution is to clean and prep the area, spray the elements with water, with a glue brush the obscured interior areas and perimeter walls with some Gorilla. Next, cut a section of clear heavy platic sheeting, say, from a packaging bag from some item you recently bought, or a Zip-loc, of size with sufficient overlap. Then, solidly reinforce the damaged ares with a rigid, nailable sheeting to create a form, say, Luan underlayment, or equal, and tack this form to the tackable areas of the good wood. Create a fill/vent hole at the highest point on one side of the voided-to-fill area. Using the squeezable Gorilla bottle force the glue through the hole to fill, say, 1/3 of the voided volume. Sorry, but the exact amount is not known since the coefficent of expansion remains an unknown to this date, and may vary according to other elements of physics and science. But, this is pretty much a dummy-proof method. Let the project sit overnight. If you don't see an excess of Gorilla that has forced its way out the vent hole, then give another light spray shot of water through the hole and inject some more Gorilla through the hole, sit and let cure. Upon completion, cut access off, strip the form, sand, drill, if needed, and paint to finish. The extent of the area and conditions that this method of application can be used is unknown. Also, the expected shelf-life is unknown, so I bought the 8 oz. bottle. The integrity of the glue is still good after six months. Explore, test and share your results with others. This is a worthwhile product that works as I never expected.

If you have a lot of broken stuff, never leave home without your Gorilla! ... Read more

Features

• 1000-pack
• DuraSpin collated screws make even the novice or apprentice user as fast as the most experienced bulk screw user
• Collated screws mean no more screw slivers underneath your fingernails, or painful finger cuts from bulk screws
• Reduced waste--eliminate the waste experienced with bulk screws (can be 10% to 15% of total screws used).
• Use with cement board, drywall, floor sheathing, underlayment, and wood

Features

• 100% Waterproof
• Bonds wood, stone, metal, ceramic, foam and more.
• Paintable and stainable
• Solvent free

Reviews (1)

joining wood using gorilla glue
easy to use,stores well, sandable, stainable, bonds extremely well. a truly excellent product for wood. I am now expanding my uses to other materials and find it excellent also. I highly recommend the product. ... Read more