Product Description

The GE SmartWater replacement filter set (FXSVC) fits all GE SmartWater dual-stage drinking water filters and many other brands of dual housing filters such as Culligan and OMNIFILTER, that accept 9.75 x 2.5 inch filters including: GE GXSV10C, GE GNSV25CBL, GNSV30CWW, GNSV30CCC, GE GXSL03C, GE GNSL05CBL, and Culligan SY-2500. It is interchangeable with the GE FXSLC & Culligan D250 filters. When installing, the white filter with green ends goes in Position 1 (Closest to the inlet), and the other filter goes in Position 2. It removes the following impurities: 99% of Chemicals/VOCs, 90% of Mercury (6.5pH), 97% of Chlorine, 98% of Lead, 99.99% of Cysts, 99% of Turbidity, 99% of Asbestos, and Particulates 0.5-1.0 micron. It does not remove flouride. GE recommends that you replace the filter every 6 months OR after 600 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water. ... Read more

Features

• Fits all GE SmartWater dual-stage drinking water filters
• Also fits other brands of housings that accept 9.75 x 2.5 inch filters
• i.e. GE GXSV10C, GNSV25CBL, GNSV30CWW, GNSV30CCC, GXSL03C, GNSL05CBL, and Culligan SY-2500
• Interchangeable with GE FXSLC & Culligan D250 filters
• Should be replaced every 6 months Free Shipping on all orders over $40

Product Description

Delta Faucet Michael Graves Single Handle Kitchen Faucet at Faucet.com ... Read more

Features

• For 3-Hole Application
• Spout Reach: 9-3/8''
• Shown With Metal Lever Handle, Dual Fuction Swivel Head Aerator And Side Sprayer

Product Description

Kohler Fairfax Pull-Out Spray Kitchen Faucet at Faucet.com ... Read more

Features

• For 1 Or 3-Hole Application
• Spout Reach: 9''
• Shown With Lever Handle
• This Faucet Is ADA Compliant

Product Description

The GE SmartWater replacement filter set (FXSLC) fits all GE SmartWater dual-stage drinking water filters and many other brands of dual housing filters such as Culligan and OMNIFILTER, that accept 9.75 x 2.5 inch filters including: GE GXSV10C, GE GNSV25CBL, GNSV30CWW, GNSV30CCC, GE GXSL03C, and GE GNSL05CBL. It is interchangeable with the GE FXSVC filter set. When installing, the white filter with no end caps goes in Position 1 (Closest to the inlet), and the other filter goes in Position 2. It removes the following impurities: 98% of Lead, 90% of Mercury (6.5pH), 89% of Atrazine (a Herbicide), 92% Lindane Removal (a Pesticide), 99.99% of Cysts, 99% of Asbestos, 99% of Turbidity, 97% of Chlorine, Particulates 0.5-1.0 micron. It does not remove flouride. GE recommends that you replace the filter every 6 months OR after 600 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water. ... Read more

Features

• Fits all GE SmartWater dual-stage drinking water filters
• Also fits other brands of housings that accept 9.75 x 2.5 inch filters
• i.e. GE GXSV10C, GNSV25CBL, GNSV30CWW, GNSV30CCC, GXSL03C, and GNSL05CBL
• Interchangeable with the GE FXSVC filter set
• Should be replaced every 6 months Free Shipping on all orders over $40

Product Description

The GE SmartWater replacement reverse osmosis filter set (FX12P) fits the following GE 12 gallon per day reverse osmosis drinking water systems: GE PNRV12Z, GE PNRV12ZBL, GE PNRV12, and GE GXRV10. When installed in a GE GXRV10 or PNRV12, this GE reverse osmosis replacement filter set removes: 99% of Lead, 99.95% of Cysts, 97% of Mercury, 99% of Chemicals/VOCs, 99% of Copper, 97% of Tannins, and Particulates 0.5-1.0 micron. It also reduces Sediment, Rust, Chlorine (Taste and Odor), Nitrate/Nitrite, Sodium, Magnesium, Ammonia, and Arsenic. GE recommends that you replace the filter every 6 months OR after 900 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water. ... Read more

Features

• Fits the following GE 12 gallon per day reverse osmosis drinking water systems:
• PNRV12Z, PNRV12ZBL, PNRV12, and GXRV10
• Should be replaced every 6 months
• Free Shipping on all orders over $40

Product Description

The GE SmartWater replacement reverse osmosis membrane (FX12M) fits the following GE 12 gallon per day reverse osmosis drinking water systems: GE PNRV12Z, GE PNRV12ZBL, GE PNRV12, and GE GXRV10. When installed in a GE GXRV10 or PNRV12, this GE reverse osmosis membrane removes: 99% of Lead, 99.95% of Cysts, 97% of Mercury, 99% of Chemicals/VOCs, 99% of Copper, 97% of Tannins, and Particulates 0.5-1.0 micron. It also reduces Sediment, Rust, Chlorine (Taste and Odor), Nitrate/Nitrite, Sodium, Magnesium, Ammonia, and Arsenic. GE recommends that you replace the membrane when your system monitor lights indicate replacement is required (approximately 3-5 years). ... Read more

Features

• Fits the following GE 12 gallon per day reverse osmosis drinking water systems:
• PNRV12Z, PNRV12ZBL, PNRV12, and GXRV10
• Should be replaced when your system monitor lights indicate replacement is required (3-5 years)
• Free Shipping on all orders over $40

Product Description

The GE SmartWater Replacement Whole House Heavy Duty Filter (FXHTC) fits GE SmartWater Whole House filters. It also fits most other brands of Whole-House filters that accept 9.5 x 4.5 inch filters. This GE water filter cartridge reduces Chlorine (Taste and Odor), Sand, Soil, Silt, Sediment, Rust, and Particulates (25 micron). It does not remove flouride. GE recommends that you replace the filter every 3 months OR after 5000 Gallons of water have been filtered OR if you notice a decrease in the flow of water. ... Read more

Features

• Fits GE GXWH30C SmartWater Whole House filters
• Also fits most other brands of Whole-House filters that accept 9.5 x 4.5 inch filters
• Should be replaced every 3 months
• Free Shipping on all orders over $40

Product Description

Price Pfister Marielle Pull-Out Spray Kitchen Faucet at Faucet.com ... Read more

Features

• For 1 Or 3 Hole Application
• Shown With Lever Handle
• This Faucet Is ADA Compliant
• Optional Deck Plate Included

Product Description

Grohe Stainless Steel Pull-Out Spray Kitchen Faucet at Faucet.com ... Read more

Features

• For 1-Hole Application
• Spout Reach: 8-1/2''
• Shown With Lever Handle
• This Faucet Is ADA Compliant

Product Description

• Single-lever top-mount
• Pre-rinse faucet
• 5 5/8" spout height from deck to aerator
• 6 5/8" reach
• 360 degree swing spout from center

Features

• Finish: Brushed Chrome
• Series: Arezzo
• Elkay Brushed Chrome Kitchen Faucet LK7420

Product Description

Price Pfister Marielle Single Handle Kitchen Faucet at Faucet.com ... Read more

Features

• For 3-Hole Application
• Spout Reach: 9-1/2''
• Includes Chrome Side Spray
• This Faucet Is ADA Compliant

Features

• Fits GE GXWH01C & GXWH08C SmartWater Whole House filters
• Also fits most other brands of Whole-House filters that accept 9.5 x 2.5 inch filters
• Should be replaced every 3 months
• Free Shipping on all orders over $40

Product Description

• Two function pull=-down
• 2-hole installation
• Spout = 14.80" overall height, 8.57" aerator to deck height, 8.27" reach
• Mounts to 2 1/2" deck thickness
• Comes standard with fittings
• Stabilization plate included for thin-deck applications
• 2.2 gpm @ 60 psi, 8.3L/min @ 414kPa

Features

• Brizo Kitchen Faucet B63500-PCSD

Product Description

The GE SmartWater replacement faucet filter cartridge (FXMLC) fits the GE GXFM03C Faucet Filter. It improves the taste and odor of the water and removes the following impurities: 99.99% of Cysts, 98.9% of Turbidity, 99% of Lead, 97.5% of Chlorine (Class I), 94.9% of Atrazine (a herbicide), 97.6% of Lindane (a pesticide), and Particulates 0.5-1.0 Micron (Class I). GE recommends that you replace the filter every 3 months OR after 200 gallons of water have been filtered OR if you notice a decrease in the flow of water or objectionable tastes in the water. ... Read more

Features

• Fits the GE GXFM03C Faucet Filter
• Improves the taste and odor of the water
• Should be replaced every 3 months or 200 gallons
• Free Shipping on all orders over $40

Product Description

Clearflo 1-1/2" Adjustable Pop-up Drain

• Tailpiece
• For through-the-floor installation
• For 17" to 26" deep baths

Features

• Finish: Brushed Nickel
• Kohler Brushed Nickel Tub Waste Accessory K-7161-AF

Product Description

The GE SmartWater Replacement Whole House Heavy Duty Filter (FXHSC) fits GE SmartWater Whole House filters. It also fits most other brands of Whole-House filters that accept 9.5 x 4.5 inch filters. This GE water filter cartridge reduces Sand, Sediment, Rust, and Particulates (30 micron). It does not remove flouride. GE recommends that you replace the filter every 3 months OR after 24,000 Gallons of water have been filtered OR if you notice a decrease in the flow of water. ... Read more

Features

• Fits GE GXWH30C SmartWater Whole House filters
• Also fits most other brands of Whole-House filters that accept 9.5 x 4.5 inch filters
• Should be replaced every 3 months
• Free Shipping on all orders over $40

Product Description

Price Pfister Marielle Single Handle Kitchen Faucet at Faucet.com ... Read more

Features

• For 4-Hole Application
• Spout Reach: 9-1/2''
• Shown With Lever Handles
• Includes Stainless Steel Side SprayAnd Matching Soap Dispenser

Product Description

• Delta Classic Styling centerset lavatory faucet
• 3-hole installation
• Clear knob handle
• 4 1/2" long spout
• Metal pop-up assembly
• With 1/2" I.P.S. adapters

Features

• Delta Lavatory Faucet 522PBWF

Product Description

The GE SmartWater replacement reverse osmosis filter set (FX18P) fits the following GE 18 gallon per day reverse osmosis drinking water systems: PNRV18Z, PNRV18ZBL, PNRV18WH, PNRV18BB, PNRV18ZWW, and PNRV18ZCC. When installed in a PNRV18Z, this GE reverse osmosis filter set reduces: Arsenic, Chromium, Lead, Cysts, Sodium, Sulfate, Ammonia, Nitrate/Nitrite, Tannins, Copper, Magnesium, Chlorine (Taste and Odor), Sediment, and Rust. GE recommends that you replace the filter every 6 months OR after 900 Gallons of water have been filtered OR if your system monitor lights indicate replacement is required OR if you notice a decrease in the flow of water or objectionable tastes in the water. ... Read more

Features

• Fits the following GE 18 gallon per day reverse osmosis drinking water systems:
• PNRV18Z, PNRV18ZBL, PNRV18WH, PNRV18BB, PNRV18ZWW, and PNRV18ZCC
• Should be replaced every 6 months
• Free Shipping on all orders over $40

Product Description

Single Handle Lavatory Faucet

• Ceramic Disc Valve
• All Brass Pop-Up Drain Assembly
• Optional Deck Plate Included

Features

• Danze Lavatory Faucet 222158