Product Description

These bits are the most accurate and versatile of all wood bits. They cut extremely smooth and clean flat-bottomed holes in all kinds of wood, even in thin stock or veneers. If you have never tried one, we cannot emphasize how happy you will be with these. They will make almost all other wood bits in your workshop obsolete. All bits have 3/8" shanks and are 3-1/2" long. This is the most complete Forstner Bit Set on the market today! 16 pieces of the highest quality. Consists of one each of the sizes from 1/4" - 2-1/8" in 1/8" increments. Includes wooden box. Top quality! ... Read more

Reviews (1)

Log furniture builder
Very good drill bits for the price. ... Read more

Features

• 7 piece Titanium coated forstner bit set
• Sizes include: 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, and 1-inch
• Manufactured to exact tolerances
• Carrying case included

Reviews (3)

Not bad for the price but ...
I would agree that for the money you receive a decent set of forstner bits.
However, and I only checked the 1/2" bit in all fairness, I found that it was a quite a few thousands proud of .5"
I bought this set specifically because I needed to drill holes for some 1/2" pegs. I chucked it into the drill press and bored a few quick test holes. The bits drilled well. When I fit the pegs into the hole, well the hole was larger than the peg. Not good in fact I got mad enough to think about returning them.
After cooling down I used the vernier to verify that they did in fact measure greater than .5 I chucked in a new Craftsmen 1/2" split point drill for a comparision hole and the peg was as snug as bug in rug.. I used the vernier to confirm the Craftsman bit was dead on at .5
I can't believe that the titanium coating would make up the difference in size that I observed.

If you are intending to do really fine high class woodjoinery than you should spend the extra [$] and get the right tools. For my wood butchery projects they will work fine since in most cases the level of accuracy is within my tolerances. Lets face it how often do you need a flat bottomed hole?

I give them a 4 simply because I needed a 1/2" to be exactly a 1/2" and the drills failed to deliver.

For the price these are worth the wait
I had to wait quite a while for these to be stocked at amazon.com, just due to low supply. However, you wont find a better set at this great price out there. They work great and are much faster and smoother than those wooden box nock-offs you find on Ebay. Get 'em as soon as amazon has 'em is my suggestion.

OUTSTANDING VALUE!
I have been shopping around for a reasonably priced yet not cheaply made Forstner Bit set for a while till now. All the others I have seen were higher priced and not Titanium Coated. It seems to be well made and performed very nicely upon use. I think anyone would be satisfied with this set. The Titanium coating is definitely a PLUS. Thanks Amazon.com. ... Read more

Features

• Outstanding value
• Sharp, precision machined performance
• 20 Bit sizes from 1/4" to 2"
• Titanium coated for superior performance
• Comes in wooden storage box

Reviews (2)

eh, it's okay
This is an entry-level Forstner set. On the bright side, there are plenty of sizes, and a cheap wooden case. But don't expect to be getting top-end quality for cheap with this- the case is pitiful, only slightly better than no case at all. And the quality of the bits isn't up to production standards.

Still, this is a good starter set for a novice woodworker, about on the quality one would expect from Harbor Freight.

Great Deal!
I got a complete Titanium 20 Pc set in a great wooden box for what I would have paid for about half as many bits. They came well oiled and with individual protectors on them (great idea).
They are so much stronger than my circle whole saw blade/bits. This is the forth item I have bought from Yukon Tool and all thier stuff seems to be put together very well and a great value!. ... Read more

Product Description

These bits are the most accurate and versatile of all wood bits. They cut extremely smooth and clean flat-bottomed holes in all kinds of wood, even in thin stock or veneers. If you have never tried one, we cannot emphasize how happy you will be with these. They will make almost all other wood bits in your workshop obsolete. All bits have 3/8" shanks and are 3-1/2" long. This is the most complete Forstner Bit Set on the market today! 16 pieces of the highest quality. Consists of one each of the sizes from 1/4" - 2-1/8" in 1/8" increments. Includes wooden box. Top quality! ... Read more

Features

• For use with drill presses only
• 7-piece set contains most common sizes of bits
• Smooth cutting edges for splinter-free drilling
• Drills angled holes and overlapping holes cleanly and easily
• Short pilot point reduces risk of drilling through during stopped cuts

Reviews (1)

worth the money
for the money these bits are a good buy . cut good , last as long as any other brand . they're not as pricey as carbide and won't last as long . but for a home shop they are the best buy you will find . i recommend them highly . ... Read more

Product Description

After numerous requests from customers, we are pleased ... Read more

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Features

• Carbide tipped and creates clean entry holes with smooth interiors for European-style hinges
• Use in drills or drill presses with 3/8" or larger chucks
• Manufactures List Price $29.95

Features

• Industry recognized as superior quality
• Contains sizes: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8" and 1" in a Wooden Box
• All sizes fit 3/8" chuck or larger
• You can expect 300 - 500 holes between sharpenings
• Using Recommended speeds guaranteed not to burn

Product Description

Fully polished, heat-treated steel bits are guided by own edge to bore straight, smooth holes. 3/8in. shank; sizes: 1/4in., 3/8in., 1/2in., 5/8in., 3/4in., 7/8in., 1in., 1 1/8in., 1 1/4in., 1 3/8in., 1 1/2in., 1 5/8in., 1 3/4in., 1 7/8in., 2in., 2 1/8in. Includes durable custom-molded case. ... Read more

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Features

• Life Time Warranty Made In Austria
• All sizes fit 3/8" chuck or larger
• You can expect 300 - 500 holes between sharpenings
• Using recommended speeds guaranteed not to burn
• Industry recognized as superior quality

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Thick micrograin carbide tips
• Right hand rotation

Product Description

The perfect choice to create clean entry holes with smooth interiors for European-style hinges. Carbide tipped boring bit works well in all woods, chipboard and laminates. For use in drills with 3/8" chucks. ... Read more

Features

• Life Time Warranty Made In Austria
• All sizes fit 3/8" chuck or larger
• You can expect 300 - 500 holes between sharpenings
• Using recommended speeds guaranteed not to burn
• Industry recognized as superior quality

Features

• Life Time Warranty Made In Austria
• All sizes fit 3/8" chuck or larger
• You can expect 300 - 500 holes between sharpenings
• Using recommended speeds guaranteed not to burn
• Industry recognized as superior quality

Features

• Covered by Freud's limited lifetime warranty
• Drill flat bottomed holes without splintering
• Drill straight, angled and overlapping holes
• Precision machined for best results
• Right hand rotation

Features

• Dml Forstner Bits Enable You To Bore Overlapping Holes For Large Mortise Joints.
• While Most Drills Are Guided By The Center Point, Dml'S Forstner Bit Is Guided By The Outside Rim...
• For Far More Versatility In Drilling Operations.
• Overall Length, 3-1/2"; Shank, 3/8"; Size, 3/4"
• Made In America.