Features

• Wet well keeps glue ready
• Roller head for flat surfaces
• Flat nozzle for biscuit joinery
• Pinpoint head for precision placements
• Round head for dowels and dovetails

Reviews (7)

The Art of Glueing
I never really looked at a glueing project as being an art, but this glue set allows you to be a true artist. Just as a painter has to have the right paint brush for a project, this glue set gives you the right glue attachment for the project. And it has made all the difference in the outcome of that project. The right amount of glue is placed exactly where you want it, no drips, very little excess, no spill overs onto the main surface of the board.

Each attachment, easily kept available and stored when you can find it, works with each specific project. Whether it is a dovetail, dado, bisquit spline, pinpoint or just joining two boards together, this set gets the job done.

The wet well works just fine, keeping the glue "wet" and the bottle inverted for easy glue extraction, especially when the bottle is getting low.

I didn't think I really needed this glue set, that there is not an art to glueing, that all those attachments were just extra "fluff". I have learned my lesson, I REALLY enjoy being a glue artist, using the right tool and getting the project completed with NO glue overflow!!

Works great but
clean up is the only problem I've had with this product. This glue kit was well thought out. With a vast array of attachments, I can't imagine any glue up situation a woodworker couldn't conquer. But beware, if you get pulled away from a project or forget to clean out the attachments be prepared to to spend some quality time with a paper clip. If your shop doesn't have running water, like mine, it can be a real challenge. Best of luck.

This is a nice kit, great for the money
I just used this kit for the first time. I was gluing some melamine sheets with Roo Glue (specially made for melamine) The set up time was 15 minutes, so I had a lot of surface area to cover in short order. This glue kit, using the glue roller did a nice job. It enabled me to cover a lot of surface area quickly. The amount of glue that is released is based on how much you squeeze the container. You can easily see the flow, so guesstimating is pretty easy.
My only dilemma is when doing biscuits and glue edge joinery; it is necessary to switch heads. When you are dealing with glue that is sure to get messy. So my quest is to find a dedicated biscuit joining glue bottle. That way I can use both at the same time without making head changes.
I think this kit is a great idea. It might be all plastic, but is ideally suited for the purpose. Highly recommended.

Great, but not perfect
This has proved to be a useful tool, but I find it a little lacking when gluing up biscuits, which is why I bought it. I still find myself using the glue straight from the bottle at times, which attests to its usefulness.

...it works great, what more could you ask for
This is simple and straight forward. The roller works very well...I will tell you not to let the glue dry on the roller, while it may not stick to the roller it is not easy to get off once it does dry. When you are done take a couple of minutes and rinse off the roller in the sink.

The rest of the attachments are a cool idea but the hassle of changing them out makes them less friendly to use than the standard nozzle on a regular carpenter's glue bottle. I love the roller and use it all the time and that makes this item worth having but I wouldn't get excited about the other attachments if I were you. ... Read more

Features

• Dosicol bottle with base and plastic water container. Wrench to remove tip for cleaning.
• Accurate dispensing
• Even spreading
• Large bottleneck for easy filling
• Highly efficient and time saving

Features

• Flat nozzle
• Use for biscuit joints
• Keeps glue in tip from drying

Reviews (2)

Don't waste your money on this one.
I purchased one of these a few months ago after using my buddies Lamello glue system. I thought it would work the same. I wasted .... I chucked it and bought the lamello. It was $20 more expensive but there's a big deffernce. Don't forget the disposable brushes.

Few benefits for home/shop wood worker
I receieved one of these biscuit shaped glue bottles 9 years ago, with my biscuit joiner, and used it religiously -- at first. Over the years, and several thousand biscuits later, I find laying down a thin stream of glue followed by brushing the glue to a uniform thickness on the board and biscuit surface produces a much stronger joint. Investing the 19.95+ in bulk throw-a-way applicator brushes is a better use of the money. ... Read more

Features

• Suitable for grooves, edges, dowel holes, surfaces, narrow strips, etc
• Includes stand with a non-skid base
• Glue container has specially shaped nozzle
• Stand prevents glue from drying out and blocking nozzle

Reviews (2)

Not the glue bottle to buy for biscuits
The Minicol is Lamello's less expensive glue bottle. It has a general purpose tip that suits if for gluing dowels, slots, and biscuits. But it is not Lamello's best gluing tool for use with biscuits. The Dosicol has an injector that fits a biscuit slot and injects glue through four orifices. The glue dose is metered so that there is no need to manually monitor the amount of glue that is dispensed. Just insert in the slot, press the bottle down, and move on. The Dosicol is the tool you've probably seen Norm use on New Yankee Workshop. It's well worth the additional cost.

More than a Nifty Glue Bottle
If biscuiting is something you do fairly often, your money would be well spent getting one of these well made and well thought-out glue bottles. Sure, it seems like a lot of money when you get a free bottle with every bottle of elmers glue you buy - but this really works well. The tip is precisley sized to get into biscuit slots and deliver glue to the SIDES of the slots. Very easy to control and works well for other glue dispensing operations as well (edge gluing...) The best feature of this bottle is the base. A small sponge in the base keeps the tip wet when it is being stored so there is never any seizing in the tip - it is ALWAYS ready to go. That, and the fact that the bottle is stored UPSIDE down, keeping all of your useable glue at the tip and ready to go, makes this a real tool to speed up you production schedule. Keeps things neat, too! Highly Reccommended... ... Read more