Features

• Kit includes: universal gouge jig, multi jig, tool rest with TORLOCK
• Planer/jointer blade jig, knife jig, long knife jig, axe jig
• Stone grader, diamond stone truing tool, horizontal base, scissors jig
• Profiling leather honing wheel, short tool jig, and machine cover

Reviews (1)

You can sharpen just about anything with this kit
Let me say that the Tormek system is a big bullet to bite. Seems like a lot of money spent just to sharpen things. When you get into using the sharpening system, you soon realize, that the time spent on sharpening is cut in less than half. Additionally the keen edge, (almost scary) that it puts on your tools, saves you a lot of time, and enables you to produce fine work. Instead of spending a half an hour sharpening for each 20 minutes I spend on the lathe, I spend less than half of that. And the time that I spend is more pleasurable than the stroke, stroke, stroke, with a stone and oil.
The main draw of this complete kit, is that it saves you a lot of money over the individual items.
The Tormek system, hands down, has been touted as the best across the board, in all of the woodworking reviews. The tool stays cool, the edge is brought to a polished finish, and it is easy to use.
With the accessory kit, you can even sharpen your neighbors kitchen knives. In addition to just about every other sharp edge you have in the house.
The accessories are quality made, and should last a lifetime. A bit pricey yes, but once you go for it, you know your set for any kind of sharpening you may need.
My only gripe about the system, is that you have to regrade the stone for each tool. I have been trying to think of a better way. The only solution I can come up with, is to have twin stones, side by side. Dress them both with the diamond truing bit, to get two even-same size surfaces. Then grade one of them to 220 grit, and the other one to 1000 grit. Then when you mount a chisel, for example, you would rough it out with the 220, and immediately go over to the 1000 to finish it off. Why is this important? Because you can not remove a tool from a holder, and reinstall it exactly the way it was. You may think, well I will get it close, and if you are willing to do the finer grade on just the tip, that will work. But when you go to resharpen, you have to remove more material to redress the whole surface, in order to get the full face. Capeche? So we are back to having to redress the wheel for each sharpening.
At the demonstration from the Tormek factory rep, he regraded on every tool, and spent some time leaning on the grading stone, to get it totally to the other grade.
So do we see a Tormek II in the future? I think they do not want to introduce a second stone, since that is the single most expensive part of the kit, which is expensive to start with. On small tools you could regrade half the stone, and get the same effect.
Thought you would find that interesting. The accessory kit is a nice package. I know restaurants, and barber shops etc, have an ongoing need for sharpening services. This setup makes it worthwhile to have an onboard inhouse service.
Great kit, great system, bite the bullet and buy the complete kit. In the long run you will be glad you did. ... Read more

Features

• Teeth are easily sharpened with 5/32-inch round file
• Fits most 4-inch or 4-1/2-inch disc or angle grinders
• Cuts the hardest woods in any direction
• Great for mass removal of wood
• Sculpts, channels, hollows, and cuts curves

Reviews (2)

Where is it?????????????????
Although a part of the order came the chains I did not recv' the wheel to put the chains on.Hello is any one home .Please advise when the wheel will ship.ASAP
One isnot good without the other.

A Useful Tool, indeed!
I would have given the Lancelot Carving Blade a 5-star rating except for the price BUT it really does the job as advertised. It is very useful for pole barn, post and beam construction for fitting up twisted/warped posts to rafters, etc. Oh heck...it was worth the bucks.....give it one more star! ... Read more

Features

• One disc
• replacement abrasive disc for the Porter-Cable 7403 Power Paint Remover, and 5041 Power Paint Removing Attachment
• Durable metal disc covered with durable tungsten carbide grit
• Can be scoured free of residue if it becomes clogged
• Easily removes paint and other coatings from wood and other surfaces

Features

• One disc
• Remove paint quickly and easily with this replacement abrasive disc for the Porter-Cable 7403 Power Paint Remover, and 5041 Power Paint Removing Attachment
• Durable metal disc is covered with a durable tungsten carbide grit
• Can be scoured free of residue if it becomes clogged
• Easily removes paint and other coatings from wood and other surfaces

Reviews (3)

An even quicker way to clean out the gum
Why wire-brush and icepick away at these bonded carbide disks? I've found a much quicker way to remove gum from the grit is to hold the machine VERY TIGHTLY and run the disk firmly over a rubber tire tread (scrap tire only, obviously). The only problem is the resulting smell, but hey, you're using the machine outdoors, right?

How to clean this disc
Use an ice pick and a wire brush. Chip off the gummed up paint with the ice pick and then brush off the remaining paint. You don't even need to remove the disc from the machine. Keep your icepick handy.
Forget mineral spirits and soaking and changing discs all day. Just chip off the paint and get back to work.
Under heavy use the discs wear out in about 4-8 hours of use.

Best for paint removal
This is the best way to remove paint from the exterior of your house. The 24 grit is a must for removing multiple layers. I wish they were a bit more long-lasting (they dull too quickly). But there's nothing better available. ... Read more

Features

• 36 grit
• Efficient material removal
• Long life Tungsten carbide grit
• Cleanable metal disc

Reviews (1)

This is definitely a handy little fella!
This is definitely a handy little fella. It sure beats using regular sandpaper to try to take off the paint. The carbide grit stands up to quite a beating, even the occasional nail that is sticking through the siding on your house. And it doesn't gum up too much as long as you are taking off all of the paint in one pass. You can get these in 24 and 46 grit as well. ... Read more

Features

• Disc of hard abrasive
• Cuts, grooves and trims
• Cuts metal, wood and ceramics
• Five per package

Product Description

Abrasive impregnated paper wheels are one of the fastest ways to put a razor edge on edge tools such as knives, carving chisels, plane irons, scissors etc.! This system is all that you need to put a razor edge on all of your edged tools. The system includes two laminated paper wheels, one for shaping and one for polishing which fit any 1/2" arbor bench grinder or motor. Included are instructions for mounting on 5/8" arbors as well. We recommend a motor with a speed of 3450 RPM. The silicon carbide shaping compound and wax lubricant will restore the edge to its original condition as well as minimizing the chance of "bluing" the edge. The wax acts as a lubricant and a cooling agent by reducing friction during the shaping operation. A few light passes on the silicon carbide wheel is usually enough to restore the edge and put a light burr or wire edge on the tool. Then, polish the wire edge off with the jewelers rouge polishing wheel. It's as simple as that. The Deluxe Kit system comes complete with shaping and polishing wheels, extra silicon carbide abrasive (enough for 30 coatings) jewelers rouge, conditioning wax and complete instructions for installing, and sharpening with the Razor Sharp Edge making System. ... Read more

Features

• 7 inch
• Flexible rubber backing pad with clamp nut
• Maximum rpm 5,000
• One year warranty, one year service contract, 30 day no-risk trial

Reviews (1)

a must have
If you have the Dewalt angle grinder this is a must have! It doubles the versatility of your grinder to allow for sanding applications. And like all DeWalt tools and accessories, its well designed and manufactured. ... Read more

Features

• Disc of hard abrasive
• Cuts, grooves and trims
• Cuts metal, wood and ceramics
• 36 pcs per package

Features

• Hardened steel cutters set in cast iron hood and body
• 4 cutters with a face width of 0.930" and dresses wheels up to 3-1/2" wide.
• Dresser may be gripped in both hands for steady contact with grinding wheel.

Features

• For use with Tormek SuperGrind
• Provides stability for sharpening short woodcarving tools
• Mounts directly to SuperGrind for positive control
• Accommodates a wide variety of tools
• Cuts grinding time in half

Features

• Solid metal backing flange
• Provides added support when using dry diamond blades or flat cut-off wheels
• For use with 4-1/2" grinders that have 5/8" x 11 arbors.

Reviews (1)

You're out of luck w/out it
You have to have this flange to safely use a diamond blade or cut of wheel. I can't believe that DeWalt doesn't include this part with their grinders. ... Read more

Product Description

Makita 782401-1 Lock Nut Wrench ... Read more

Product Description

Medium prepolish paste compound for removing 600-800 grit sanding marks. Leaves a semi-gloss surface and can be followed with H0818 for a high-gloss finish. Use with a lamb's wool buffing pad at approximately 1200-1400 RPM. ... Read more

Product Description

Fine past compound for removing 1000 grit sanding marks on lacquer, polyurethane and polyester coatings. Use with a lamb's wool polishing pad, running at 1400 RPM, for a beautiful high-gloss surface. Can also be used on fiberglass to restore the gloss and remove oxidation. ... Read more

Features

• Solid meatl construction
• Easy Snap IN System
• The Fastest Way to switch grits while grinding and sanding.

Product Description

A 4" diameter solid metal backer buit to attatch grinding stones and polishing wheels to angle grinders, polishers and all tools with a 5/8-11 spindle. Provides a quick and simple solution to changing grits as you work. ... Read more

Features

• Solid meatl construction
• Easy Snap IN System
• The Fastest Way to switch grits while grinding and sanding.

Product Description

Includes 8 miniature carbide burrs. For use on all materials - including tough alloys. ... Read more

Features

• Material: Solid Carbide.

Product Description

Makita 743203-4B Features: 1/4" face width for narrow to medium width worl. Excellent for cleaning welds. 1/4" face .020 Type 302 stainless steel wire for brushing component of aluminum, monel & stainless steel. Highly corriosn resistant eliminating the problem of contamination Specifications:Diamter: 4", Arbor: M10 x 1.25, Max. safe speed: 20000 For use with models: N9501BZ,N9514B, 9523NBH, 9560CV, 9563CV ... Read more