Product Description

Works great on cars and vans with a 1 1/4" hitch and making them a 2" receiver. ... Read more

Features

• One piece unit is used for converting the size of the receiving tube to either 1 1/4" or 2"
• Several models to choose. Some adapt a 1 1/4" to a 2" Receiver or 2" to a 1 1/4" Receiver
• Mounts extend 6" to 18" depending on the model

Product Description

Curt Bumper Style Hitches are 2-inch rear receiver hitches that fit right to the bumper of Chevy, Ford, and Dodge pickups.An RV Bumper Hitch is also available.A durable Evergloss Powder Coat Finish resists rust and corrosion.Note:Hitch balls, ball mount, and receiver hitch pin are sold separately. ... Read more

Features

• Fits flush to the Factory Bumpers of GM-Chev and Dodge
• Open back end on receiver for easy cleaning
• Attractive and seamless one piece PRO S DESIGN collar reduces rust and ensures strength that exceeds V-5 standards
• Receiver hitches feature precision Robotic Welding for superior strength and fit
• RV Bumper Hitch is available for RV's and towable campers with square channel bumpers

Product Description

Receiver - Class 3 No Drill - Chevrolet Astrovan-GMC Safari 85-2000 Long and Short Wheel Base Including All Wheel Drive, Will Accept Donut Spare Tire, Full Size Spare Only On Extended Vans On Class 2 and 3 ... Read more

Features

• No drilling required

Product Description

Unique extension allows you to tow your camper and bring your bikes along! Great for vacations, trips, etc. 4000-lb. capacity dual hitch extension comes with two 2in. receivers, lower tube with collar for towing and upper tube for accessories. Black powder coated for long lasting use. U.S.A. ... Read more

Features

• Top to bottom: 3 5/8in.
• Top to top: 6 3/16in.
• Center to top: 7 1/2in.
• Bottom to top: 8 13/16in.
• Overall length: 17 1/4in.

Product Description

Works great on cars and vans with a 1 1/4" hitch and making them a 2" receiver. ... Read more

Features

• One piece unit is used for converting the size of the receiving tube to either 1 1/4" or 2"
• Several models to choose. Some adapt a 1 1/4" to a 2" Receiver or 2" to a 1 1/4" Receiver
• Mounts extend 6" to 18" depending on the model

Product Description

Receiver Hitch - Class 3 No Drill - Ford Explorer 91-2001 Ford Explorer Sport Trac 2001 Mercury Mountaineer 96-2001 Mazda Navajo 91-94 ... Read more

Features

• No drilling required

Product Description

Turns a hitch carrier rack into a covered cargo organizer. ... Read more

Features

• Rugged vinyl coated nylon sheds dust and weather.
• Installs in minutes with two provided compression straps.
• Huge 48" x 19" x 18" center compartment holds luggage, full-sizes coolers, and more.
• Two outside pockets keep smaller gear handy.
• Color: Black

Product Description

Securely attaches to hitch - you'll never lose it. Eliminate unwanted snow and mud. Easily covers and uncovers hitch receiver. Built-in electrical connection holder helps eliminate corrosion. Universal size fits all 2" hitch receivers. Made of flexible rubber. ... Read more

Product Description

Receiver - Class 3 No Drill - Chevrolet S10 Pickup 83-97, Chevrolet Zr2 Pickup 95-97, GMC Highrider Pickup 95-97, GMC S15 Pickup 83-97, GMC Sonoma Pickup 83-97, Isuzu Hombre Pickup 1996 With Step Bumper ... Read more

Features

• No drilling required

Product Description

Fits 2in. square receiver. 1in. ball shank. bushing included. Order pin #33053 separately. U.S.A. ... Read more

Features

• Gross Load: 6000 lbs.
• Tongue Load: 600 lbs.
• Maximum Lift: 2 3/4in.
• Maximum Drop: 4in.
• Shank: 8in.L

Product Description

Works great on cars and vans with a 1 1/4" hitch and making them a 2" receiver. ... Read more

Features

• One piece unit is used for converting the size of the receiving tube to either 1 1/4" or 2"
• Several models to choose. Some adapt a 1 1/4" to a 2" Receiver or 2" to a 1 1/4" Receiver
• Mounts extend 6" to 18" depending on the model

Features

• All Putnam hitches are receiver type hitches, specifically designed for each make and model of car, truck or van
• Ruggedly built and finished with tough powder coating, Putnam's quality is unsurpassed
• Class III hitches are rated at 5,000 lbs. trailer weight and 500 lbs. tongue weight

Product Description

Durable pin and locking clip secures bar to hitch. Solid steel with zinc finish to protect against rust. Available in 1/2" or 5/8". ... Read more

Features

• Durable pin and locking clip
• secures bar to hitch
• Solid steel with zinc finish to protect against rust.
• Available in 1/2" or 5/8".

Product Description

The QuickGoose Gooseneck hitch that has it all. The Quick Goose allows you to raise or lower and store your ball without climbing into the truck bed.Order Notes: 1 = Cut or remove heat shield, drill (2) 1/2" holes/side. 2 = Relocate brake lines on driver side. No drilling required. 3 = Remove heat shield, drill (2) 1/2" holes/side in frame, tire removal. 4 = Some Dodge applications will require the fender skirt to be drilled or removed.5 = Will Not Fit Chevy 2500 HD Gas Models All applications must cut or remove heat shield. For precise installation use template provided. ... Read more

Features

• Easy Use: Simply by engaging the remote lift system, up comes the ball while a positive loaded securement system fully engages automatically to secure the ball in the upright position
• No Climbing: Enabling the ball to rotate 360 degrees to help eliminate unwanted binding, ball our coupler wear. No climbing into the truck bed.
• Low Profile: To put the ball down, simply disengage the ball securement system. Protective cap included.
• Chrome 2 5/16" 30,000 lb capacity and 6,000 lb tongue weight
• Unique 360 degree ball rotation reduces coupler wear

Product Description

Class 2, 3,500 GTW, 2" Ball, 2" Channel, Oily Finish ... Read more

Features

• All couplers are made to meet or exceed SAE, VESC V-5 and CSA requirements
• Supported by an extended warranty ensuring years of reliable performance
• Designed for formed couplers with the channel design
• Kits are easily installed and offer new coupler features

Features

• Universal Manual Lift Kit
• Mechanism has cable-and-pulley system for use in place of ATV winch
• Installs easily and fits most ATVs with front racks

Product Description

Curt MFG Class 3 Rear receiver towing hitches with Evergloss powder coated finish.The Classic Rear Receiver Hitch for Trucks/SUV's for towing and pulling.Order Notes for Curt Hitches Class 1 - 5 A: Additional Install Time Required B: May need to relocate/modify exhaust C: If equiped w/ load-leveling - air pump mod required D: Minor fascia trimming required E: Noticeable fascia trimming required F: Will not fit vehicles w/ ground effects G: Additional install time if vehicle has load leveling H: Will not fit twin tailpipes I:Will not fit w/ fullsize spareJ: Keeps fullsize spare under vehicle K: OEM Style L: Fixed drawbar M: Round Tube Style N: While supplies last P: Will not fit w/ roll pan bumper Q: Temporary bumper removal for install R: Boxed, bolt-on arms S: DiscountinuedT: Rated for 2,500 lb GTW U: Rated for 1,000 lb GTW V: Rated for 3,500 lb GTW W: Call For Availability X: Rated for 5,000 lb GTW Y: Will not ship UPS/Fed Ex Z: NO Drill Install ... Read more

Features

• Rear Hitches: GTW 10,000 WD / 6,000 WC (round tube styles: GTW 6,000 WD / 5,000 WC) Durable EVERGLOSS Powder Coat Finish resists rust and corrosion
• Weather Tight construction prevents rusting for the inside out by sealing the main body
• Open back end on receiver for easy cleaning. Attractive and seamless one piece PRO S DESIGN collar reduces rust and ensures strength that exceeds V-5 standards
• Precision robotic welding for superior strength and fit. Step pad included in main applications. All required grade 5 hardware included
• Note: Hitch Balls, Ball mount and receiver hitch pin sold separately

Product Description

Curt offers a special Brute Series 2.5 Rear receiver hitch. 2inch receiver GTW 4,000WC Order Notes for Curt Hitches Class 1 - 5 A: Additional Install Time Required B: May need to relocate/modify exhaust C: If equiped w/ load-leveling - air pump mod required D: Minor fascia trimming required E: Noticeable fascia trimming required F: Will not fit vehicles w/ ground effects G: Additional install time if vehicle has load leveling H: Will not fit twin tailpipes I:Will not fit w/ fullsize spareJ: Keeps fullsize spare under vehicle K: OEM Style L: Fixed drawbar M: Round Tube Style N: While supplies last P: Will not fit w/ roll pan bumper Q: Temporary bumper removal for install R: Boxed, bolt-on arms S: DiscountinuedT: Rated for 2,500 lb GTW U: Rated for 1,000 lb GTW V: Rated for 3,500 lb GTW W: Call For Availability X: Rated for 5,000 lb GTW Y: Will not ship UPS/Fed Ex Z: NO Drill Install ... Read more

Features

• Class 2.5 Rear Hitch GTW 4,000 WC. Size: 2 inch rear receiver hitches
• Durable EVERGLOSS Powder Coat Finish resists rust and corrosion
• Weather Tight construction prevents rusting for the inside out by sealing the main body. Open back end on receiver for easy cleaning.
• Attractive and seamless one piece PRO S DESIGN collar reduces rust and ensures strength that exceeds V-5 standards
• Precision robotic welding for superior strength and fit. All required grade 5 hardware included

Product Description

Adapts 2in. hitch opening to accept 1 1/4in. insert. Lets you use your current hitch accessories. Powder coated black finish. U.S.A. ... Read more

Product Description

Receiver - Class 3 No Drill - Jeep Grand Cherokee 93-98 ... Read more

Features

• No drilling required