Features

• Wt: 265 lbs
• 20-Ton

Features

• 1 1/4" stroke
• Collapsed height 3.90 in
• Extended height 5.65 in
• Outside diameter 3.63 in

Features

• 20 ton flat ram
• 0.43 in stroke
• Collapsed height 2.01 in
• Extended height 2.44 in
• Outside diameter 3.98 x 2.99 in

Product Description

Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. ... Read more

Features

• Size: 2in.

Features

• Will get into close areas
• 4,000 lbs
• Screw up head
• Use it with any Porto-Power

Features

• Fits all 4 ton Blackhawk Automotive rams

Product Description

Match size with pillow block when ordering. ... Read more

Features

• Size: 3/4in.
• Type: 2-Bolt
• Center to center on bolt holes measures: 3 1/2in.

Product Description

Match size with pillow block when ordering. ... Read more

Features

• Size: 3/4in.
• Type: 4-Bolt
• Bolt Circle: 3 1/2in.
• Dimensions: 3 1/2in.L x 3 1/2in.W x 1 1/2in.H

Product Description

Reusable fitting for female SAE 37. Couples into hose like 50 RCM fittings. Female thread on both ends. ... Read more

Features

• Size: 3/4in.
• Wire: 2

Product Description

Use a flex coupling to mount your engine to pump. Synthetic rubber inserts between the coupling halves. When ordering, get one to fit the motor and one to fit the pump shaft diameter. Order two halves plus insert for complete coupling. Fits model LO 99 and L 100 series up to 23 HP at 3600 RPM. Made for 2 bolt brackets. ... Read more

Features

• Size: 3/4in.

Product Description

Adapts JIC 37 degree tube fitting to NPTF pipe thread fittings. U.S.A. ... Read more

Features

• Size: 3/4in. M JIC37 x 1/2in. M NPTF

Product Description

For high pressure hydraulic systems. Swivel adapters are rated up to 10,000 PSI, depending on size. NPSM X NPTF Thread for metal to metal seal. U.S.A. ... Read more

Features

• Size: 3/4in. F NPSM x 3/4in. F NPTF

Product Description

Ventilators filter particles as small as 40 microns. U.S.A. ... Read more

Features

• Size: 3/4in. NPT
• 7/8in. Diameter Across the Threads
• 3in. Diameter Across the Cap

Product Description

Top quality, advanced seals prevent leakage and keep out dirt. Two set screws to fasten bearing to shaft. Self-aligning. Solid cast housing. Interchangeable with most other makes. ... Read more

Features

• Dimension from bearing to bottom of flanges: 1 1/2in.
• Oval Shape Bolt Holes: 1/2in. x 5/8in.
• Bolt Hole Thickness: 1/2in.
• Dimensions: 5in.L x 1 1/2in.W x 2 1/2in.H

Product Description

Factory pre-set at 1500 PSI; adjustable from 1000 to 3000 PSI. Spring centered. 3/4in. inlet/outlet and 3/4in. work ports. For use with 5in. and larger cylinders and 20 gallon pumps. Up to 25 gallons per minute. ... Read more

Product Description

Male pipe NPTF. ... Read more

Features

• Size: 3/4in.
• Wire: 2

Product Description

Use a flex coupling to mount your engine to pump. Synthetic rubber inserts between the coupling halves. When ordering, get one to fit the motor and one to fit the pump shaft diameter. Order two halves plus insert for complete coupling. Standard Half LO 90 and LO 95 series, up to 11.16 HP at 3600 RPM. Maximum torque is 194in.-lbs. ... Read more

Features

• Size: 3/4in.
• 3/16in. W x 3/32in. D x 1in. L
• Keyway: 3/16in.W x 3/32in.D x 1in.L
• Body: 2 1/8in. outside diameter x 1in. thick
• 3 Ears:

Product Description

Working pressure of 2500 PSI, 3/4in. pipe thread. ... Read more

Features

• Length: 60in.
• Bursting Pressure: 9000 PSI

Product Description

Working pressure of 2500 PSI, 3/4in. pipe thread. ... Read more

Features

• Length: 24in.
• 3/4in. SAE 100R2 Two Wire Hose
• Bursting Pressure: 9000 PSI
• All Couplings are Male Pipe Thread

Product Description

Working pressure of 2500 PSI, 3/4in. pipe thread. ... Read more

Features

• Length: 48in.
• Bursting Pressure: 9000 PSI