Product Description

Use a flex coupling to mount your engine to pump. Synthetic rubber inserts between the coupling halves. When ordering, get one to fit the motor and one to fit the pump shaft diameter. Order two halves plus insert for complete coupling. Standard Half LO 90 and LO 95 series, up to 11.16 HP at 3600 RPM. Maximum torque is 194in.-lbs. ... Read more

Features

• Size: 9/16in.

Product Description

Handles a wide variety of industrial applications. All models have 1725 RPM TEFC (totally enclosed, fan-cooled) motors, check valve, adjustable relief valve and 3000 PSI pressure gauge. High strength cast iron housing. DU® bearings. Filler screen, sight gauge and flexible coupling. Hardened and ground alloy steel gears and shafts. Pressure-balanced pumps provide up to 90% overall efficiency. Ideal for systems using low viscosity fluids in high temps and high duty cycle applications. High/low pump provides high speed positioning and then maximum working pressure as in clamping, crimping and metal-forming machines. Does not include manifold or interface. ... Read more

Features

• Pump GPM: 1.5
• Motor HP: 2
• Volts-AC: 115/230
• Reservoir: 5 Gallons
• 1 Phase

Product Description

Controls the speed of hydraulic motors. Flow with 1/2in. ports for 0-16 GPM. The 3/4in. port gets 0-30 GPM. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A. ... Read more

Features

• 3/4in. Port Size

Product Description

This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. ... Read more

Features

• Size: 1/2in.
• 16 GPM Max Inlet Flow
• Ball/Spring Type Direct Acting Relief
• Fast Opening Suited for Pressure Spike Protection
• Relief is Externally Adjustable

Product Description

This compact adjustable relief valve is adjustable to 3000 PSI. 20 gallon flow. ... Read more

Features

• Size: 3/4in.
• Inline mounting ball spring relief
• Standard steel or hardened seat

Product Description

Rugged gauges with a 316 stainless steel Bourdon tube. Grade A accuracy. 1/4in. MNPT zinc plated bottom connection. Corrosion resistant steel case. Black enameled aluminum pointer, white aluminum dial and acrylic window. ... Read more

Features

• Range PSI: 0-160
• Case Diameter: 4in.

Product Description

Rugged gauges with a 316 stainless steel Bourdon tube. Grade A accuracy. 1/4in. MNPT zinc plated bottom connection. Corrosion resistant steel case. Black enameled aluminum pointer, white aluminum dial and acrylic window. ... Read more

Features

• Range PSI: 0-400
• Case Diameter: 2 1/2in.

Product Description

For use with 11, 13.6 and 16 GPM two stage pumps and single stage Parker pumps. D-Series single stage ... Read more

Features

• Use with 11, 13.6 and 16 GPM two stage pumps.
• Base to Center: 4 1/2in.

Product Description

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. ... Read more

Features

• GPM: 11
• Shaft: 1/2in.
• Inlet: 3/4in.
• Outlet: 1/2in.
• Dimensions: 5.5in.L x 3in.H x 4in. W

Product Description

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85% efficient. U.S.A. ... Read more

Features

• GPM: 13.6
• Shaft: 1/2in.
• Inlet: 1in.
• Outlet: 1/2in.
• Minimum 6 HP or larger gas engine, direct drive only.

Product Description

Use it on mobile equipment, construction and agricultural equipment, machine tools, material handling and mining equipment, PTO pumps, refuse haulers, compaction and baling equipment. Standard 4-bolt mount. 1.78in. diameter pilot with 1/2in. x 1 1/2in. shaft, 1/8in. square key. Heavy duty cast iron pump turns at 4000 RPM max. in CW or CCW direction. Use as a fluid pump or fluid motor. Similar to Parker D Series, Webster YB Series, Rexroth S12, MTED Series. Flexible coupling or belt (pulley) drive. 95% efficient. U.S.A. ... Read more

Features

• Cubic Inch Size: .097
• Flow at 1800 RPM: .75
• Flow at 3600 RPM: 1.5
• Maximum PSI Cont.: 3000
• Maximum PSI Intmt.: 4000

Features

• Best made for the price
• Plenty of pipe and accessories
• Molded plastic case
• 1 YEAR WARRANTY

Features

• Fits all 10 ton Blackhawk Automotive hoses

Features

• Fits all 10 ton Blackhawk Automotive rams
• Includes dust cap

Features

• The original Blackhawk Automotive pump
• 10 tons of power at 90 psi

Features

• Fits all 4 ton Blackhawk Automotive rams

Features

• Fits all 4 ton Blackhawk Automotive hoses

Features

• The original Blackhawk Automotive pump
• 10 tons of power at 90 psi

Product Description

Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. ... Read more

Features

• For Bracket: 3032
• For Pumps: 1012, 1053, 1056, 10102 and 10103
• Fits Engines: 7, 8 and 10 HP Briggs, Tecumseh, Kohler, Honda, and 8-11 HP Wisconsin/Robin

Features

• To filter air intake into the tank
• To mount, weld in black pipe coupling to your tank and screw in 3/4in. threads