Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 2 3/4"
• Length: 13"
• Tapered .0005" per inch. Undersize at small end.

Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 2 3/8"
• Length: 12"
• Tapered .0005" per inch. Undersize at small end.

Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 2 5/8"
• Length: 12 1/2"
• Tapered .0005" per inch. Undersize at small end.

Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 2 7/8"
• Length: 13"
• Tapered .0005" per inch. Undersize at small end.

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = ALUMINUM 6061 T-6 BAR STOCK, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = 2, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 3.75, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 10, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = ALUMINUM 6061 T-6 BAR STOCK, Groove Width G = 0.63, Screw Size E = 12mm, Hole Space D = 1.181, Hole to Front J = 2.375, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 4.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-10 ,B-210 ,B-250 ,BL210 ,BT-10 ,BT-210 ,AS-10, HO-10 ,HOB-10 ,HOH-10,HOH-210
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-10-72 B, H-10-67 ,H-11-_, HH-10 ,HHJ-10 ,HX-10-67B
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 250 ,AN-M 250 ,BB-M 250 ,BH-M 250 ,BHM-FC 250 ,HB-M 250 ,PB-M 250
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

ROUND JAWS for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = ALUMINUM 6061 T-6 BAR STOCK, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = 1.325, Width (Not Applicable for Round Jaws) C = -, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 8, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

ROUND JAWS for Chuck Diameter = 10, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = ALUMINUM 6061 T-6 BAR STOCK, Groove Width G = 0.63, Screw Size E = 12mm, Hole Space D = 1.181, Hole to Front J = 2.375, Width (Not Applicable for Round Jaws) C = -, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 10, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-10 ,B-210 ,B-250 ,BL210 ,BT-10 ,BT-210 ,AS-10, HO-10 ,HOB-10 ,HOH-10,HOH-210
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-10-72 B, H-10-67 ,H-11-_, HH-10 ,HHJ-10 ,HX-10-67B
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 250 ,AN-M 250 ,BB-M 250 ,BH-M 250 ,BHM-FC 250 ,HB-M 250 ,PB-M 250
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

2 STEP HARD JAWS for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = -, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 3.3, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS Flat End for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = 2, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 3.75, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS Flat End for Chuck Diameter = 10, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.63, Screw Size E = 12mm, Hole Space D = 1.181, Hole to Front J = 2.375, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 4.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-10 ,B-210 ,B-250 ,BL210 ,BT-10 ,BT-210 ,AS-10, HO-10 ,HOB-10 ,HOH-10,HOH-210
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-10-72 B, H-10-67 ,H-11-_, HH-10 ,HHJ-10 ,HX-10-67B
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 250 ,AN-M 250 ,BB-M 250 ,BH-M 250 ,BHM-FC 250 ,HB-M 250 ,PB-M 250
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS Flat End for Chuck Diameter = 12, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.827, Screw Size E = 16mm, Hole Space D = 1.181, Hole to Front J = 3.125, Width (Not Applicable for Round Jaws) C = 2, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 5.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-212 ,BL212 ,BT-212
• FOR SMW/AUTOBLOCK CHUCKS: 250 ,AL-M 315 ,AN-M 315 ,BB-M 315 ,BH-M 315 ,HB-M 315 ,PB-M 315
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = 2.25, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 4, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 8, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.551, Screw Size E = 12mm, Hole Space D = 0.984, Hole to Front J = 2, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 3.75, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-08 ,B-208 ,BT-08 ,BT-208, AS-08 ,AS-210 ,AT-08 ,HO-8 ,HOB-8 ,HOH-208, N-08
• FOR HOWA CHUCKS: HO15M8 ,HO2M8 ,HO7MA8
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-8-52 ,ZJ-8-52, HA_-8 ,HH-8 ,HHJ-8 ,HHL-8 ,HJ-8-46
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 10, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.63, Screw Size E = 12mm, Hole Space D = 1.181, Hole to Front J = 2.375, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 4.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-10 ,B-210 ,B-250 ,BL210 ,BT-10 ,BT-210 ,AS-10, HO-10 ,HOB-10 ,HOH-10,HOH-210
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-10-72 B, H-10-67 ,H-11-_, HH-10 ,HHJ-10 ,HX-10-67B
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 250 ,AN-M 250 ,BB-M 250 ,BH-M 250 ,BHM-FC 250 ,HB-M 250 ,PB-M 250
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 10, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.63, Screw Size E = 12mm, Hole Space D = 1.181, Hole to Front J = 2.875, Width (Not Applicable for Round Jaws) C = 1.5, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-10 ,B-210 ,B-250 ,BL210 ,BT-10 ,BT-210 ,AS-10, HO-10 ,HOB-10 ,HOH-10,HOH-210
• FOR MATSUMOTO (MMK) CHUCKS: ZA_-10-72 B, H-10-67 ,H-11-_, HH-10 ,HHJ-10 ,HX-10-67B
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 250 ,AN-M 250 ,BB-M 250 ,BH-M 250 ,BHM-FC 250 ,HB-M 250 ,PB-M 250
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 12, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.709, Screw Size E = 14mm, Hole Space D = 1.181, Hole to Front J = 3.125, Width (Not Applicable for Round Jaws) C = 2, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 5.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-12 ,B-300 ,BT-12 ,HJA-12 ,HO-12 ,HOB-12 ,HOH-12, HOS-12 ,N-12 ,NL-12 ,NLT-12
• FOR HOWA CHUCKS: HO15M12 ,HO22M10 ,HO23M12 ,HO24M10 ,HO27M10 ,HO37M10 ,HO47M10 ,HO5M10 ,HO6M8
• FOR MATSUMOTO (MMK) CHUCKS: ZA8-12-_ ,HX-12 ,SH-12 ,HH-12 ,HHJ-12 ,HHL-12 ,HJ-12
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 6, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.472, Screw Size E = 10mm, Hole Space D = 0.787, Hole to Front J = 1.625, Width (Not Applicable for Round Jaws) C = 1.25, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 3, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-206,BT-206, B-06, BT-06 , AS-06,HJA5-6 ,HOB-6 ,HOH-06, HOH-206, N-06
• FOR HOWA CHUCKS: HO15M6 ,HO15MA6 ,HO1MA6 ,HO22M6 ,HO23M8 ,HO24M6 ,HO27M6 ,HO37M6 ,HO47M6 ,HO7MA6
• FOR SMW/AUTOBLOCK CHUCKS: AL-M 165 ,AN-M 165 ,BBM 175 ,BH-M 165 ,BHM-FC 165 ,HB-M 165 ,PB-M 165
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

SOFT JAWS 60° Pointed End for Chuck Diameter = 12, Lock Type / Serrations = METRIC 1.5mm x 60°, Material = STEEL ASE 1018/1050 HEAT TREATABLE, Groove Width G = 0.827, Screw Size E = 16mm, Hole Space D = 1.181, Hole to Front J = 3.125, Width (Not Applicable for Round Jaws) C = 2, Length (if Soft Jaws or Hard Jaws, Pie Diameter if Round Jaws) B = 5.5, Height A = 2.00. All Dimensions in Inches. Pricing is Per Set of 3 Jaws ... Read more

Features

• FOR KITAGAWA CHUCKS: B-212 ,BL212 ,BT-212
• FOR SMW/AUTOBLOCK CHUCKS: 250 ,AL-M 315 ,AN-M 315 ,BB-M 315 ,BH-M 315 ,HB-M 315 ,PB-M 315
• Dimensions G,E & D are CRITICAL. Please make sure these dimensions match your chuck.
• SCROLL DOWN this PAGE for DIMENSIONS !!

Product Description

Self-centering chucks utilize a spiral scroll that causes all three jaws to close on the part at the same time when the outer ring of the chuck is turned in relation to the body. Round or hex material is centered quickly and easily. Runout (centering accuracy) is guaranteed to be .003" or less. Because of the number of moving parts, accuracy greater than this cannot be guaranteed with this type of chuck. If greater centering accuracy is needed, an "independent" jaw chuck where the jaws are adjusted one at a time might be needed. Self-centering chucks are the most popular because they offer quick centering and a high enough level of accuracy for most jobs. Reversable jaws are made from hardened steel. This large chuck will hold parts from 3/32" up to 1/3/16" with the jaws in the normal position. Reversing the jaws allows parts up to 2-1/4" to be held. Two steel spindle bars (sometimes called "Tommy" bars are included to tighten the chuck. For use with Sherline machine tools. ... Read more

Features

• Hardened steel reversible jaws
• Hold parts from 3/32 to 1-3/16 in regular position, to 2-1/4 with jaws reversed
• Jaws scroll together when outer ring of chuck is turned for quick centering of material
• ¾-16 thread fits Sherline spindles
• Includes two spindle bars for adjustment