Product Description

New and improved! We took our basic combination Metal Lathe/Milling Machine and increased its capacity and usability. Start with a lathe spindle bore of 3/4" and a longer bed. Then add more change gears, 4" 3-jaw chuck, reversing switch and so much more. This is an excellent machine for anyone, from the beginning machinist to the seasoned machinist. You get a lot of machine in a very small package with the features you need for just about any job! ... Read more

Features

• 4" 3-jaw chuck
• Cuts inch and metric threads
• Distance between centers: 19.2"
• Motor size (single phase 110V): 3/4 H.P.
• Swing over bed: 16-1/2"

Reviews (1)

LET HARRY DO IT.
Just starting up for retirement, alway did maintainace, and
they woulnot let me in machineshop to see how they did it.
so at 53 yr."ima" learning. This little lathe combo is nice.
ONLY PROBLEM IS A HARD SPOT DURING CHUCK TIGHTING AND LOOSING, AND HOPEFULLY , IT WILL CLEAR UP WITH USE. MY SON OF 11 YEARS OF AGE , JUST FINISHED MAKING OUR OWN LATHE GRINDER ,
LIVE CENTER , AND NOW WORKING ON OUR OWN TAPER ATACHMENT.
OH, YEA, IMA TRYING TO LEARN TO TYPE TOO. ... Read more

Features

• 5-1/2" rosewood handles
• 1/2" oval skew
• 1/4" bowl gouge
• 1/8" parting tool
• 3-1/2" HSS

Product Description

3/4" Scraper square end. Scrapers are used for light finishing cuts and where the use of a cutting tool is either not possible or desirable. Diamic Brand woodturning tools have been hand made by Henry Taylor craftsmen in Sheffield England for over 150 years. The manufacture of these tools marries traditional hand crafting skills with modern heat-treating and finishing technologies to give the quality of design and edge retaining properties demanded by turners today. The proprietary alloy of steel and trace metals used by Henry Taylor yields a high-speed steel unequaled by other manufacturers. The Cutting Edge carries only high-speed steel turning tools. Although they are slightly more expensive than carbon steel tools, the heat and abrasion resisting properties of this steel produces a superior, long-lasting edge. In addition, high-speed steel is extremely resistant to accidentally drawing the temper during grinding. ... Read more

Features

• Made with the best high speed steel
• More heat and abrasion resistant than carbon steel
• Hand Forged
• Handled

Product Description

1/4" Spindle Gouge. These gouges are the easiest to use for general purpose spindle turning. A fingernail grind is the preferred shape for these tool. Diamic Brand woodturning tools have been hand made by Henry Taylor craftsmen in Sheffield England for over 150 years. The manufacture of these tools marries traditional hand crafting skills with modern heat-treating and finishing technologies to give the quality of design and edge retaining properties demanded by turners today. The proprietary alloy of steel and trace metals used by Henry Taylor yields a high-speed steel unequaled by other manufacturers. The Cutting Edge carries only high-speed steel turning tools. Although they are slightly more expensive than carbon steel tools, the heat and abrasion resisting properties of this steel produces a superior, long-lasting edge. In addition, high-speed steel is extremely resistant to accidentally drawing the temper during grinding. ... Read more

Features

• Made with the best high speed steel
• More heat and abrasion resistant than carbon steel
• Hand Forged
• Handled

Product Description

3/4" Key Sq. End/Side Scraper. Used mainly for making boxes from hard, dense end-grain materials. Internal hollowing is made easy with the 60? andgle of the gouges, allowing a pivot cutting action. The long side grind is used for pulling the tool along the outside. The skew has a very long radius bevel for long cuts, shear-scraping on endgrain and for under-cutting the dovetails required by many bowl chucks. The scrapers are ideal for truing up the insides of curved and straight-walled boxes and vessels. Diamic Brand woodturning tools have been hand made by Henry Taylor craftsmen in Sheffield England for over 150 years. The manufacture of these tools marries traditional hand crafting skills with modern heat-treating and finishing technologies to give the quality of design and edge retaining properties demanded by turners today. The proprietary alloy of steel and trace metals used by Henry Taylor yields a high-speed steel unequaled by other manufacturers. The Cutting Edge carries only high-speed steel turning tools. Although they are slightly more expensive than carbon steel tools, the heat and abrasion resisting properties of this steel produces a superior, long-lasting edge. In addition, high-speed steel is extremely resistant to accidentally drawing the temper during grinding. ... Read more

Features

• Made with the best high speed steel
• More heat and abrasion resistant than carbon steel
• Hand Forged
• Handled

Product Description

Offset spurs reduce splitting. Value priced! ... Read more

Product Description

Revolutionary rebar cutter/bender features unique bending dies that don't require rebar repositioning to get a true 90 bend. Two cutting slots accept #5 (5/8in.) and #4 (1/2in.) rebar. Replaceable cutter blades made of forged steel. For use with 40- and 60-grade rebar. U.S.A. ... Read more

Product Description

3/4" Diamond Sectioned Parting Tool. Diamic Brand woodturning tools have been hand made by Henry Taylor craftsmen in Sheffield England for over 150 years. The manufacture of these tools marries traditional hand crafting skills with modern heat-treating and finishing technologies to give the quality of design and edge retaining properties demanded by turners today. The proprietary alloy of steel and trace metals used by Henry Taylor yields a high-speed steel unequaled by other manufacturers. The Cutting Edge carries only high-speed steel turning tools. Although they are slightly more expensive than carbon steel tools, the heat and abrasion resisting properties of this steel produces a superior, long-lasting edge. In addition, high-speed steel is extremely resistant to accidentally drawing the temper during grinding. ... Read more

Features

• Made with the best high speed steel
• More heat and abrasion resistant than carbon steel
• Hand Forged
• Handled

Product Description

Perfect for just about any turning requirement, these dust, chip and oil proof live centers feature 60deg included angles and pre-loaded taper bearings. Choose from MT #1 through Mt #4. ... Read more

Product Description

This all ball bearing Live Center is preferable over dead centers because there is very little turning resistance. Precision made for years of dependable service. ... Read more

Features

• Supports 1" shank tool rests
• Large locking lever and mounting bracket for easy adjustment
• Cast iron for strength and vibration resistance
• Fits Delta 12" wood lathes

Reviews (1)

Improved over the old style-#46-171 which it replaces
vibration free-Heavy cast iron. Large handle for big hands, locks base to lathe bed "rock solid". Screw lock for tool rest works both left or right side. Helps to keep it away from work or tail stock.
Thats an exspecially handy feature when using the 24 inch tool rest
which requires two tool rest bases. ... Read more

Features

• 2 each open/close levers
• Basic Straight Jaws for 1" Stock, square or round
• Bonus jaws to hold dowls 1-1/2" to 2-3/8" - to grip internally 2" to 3"
• Stepped jaws for small dowls 3/8" to 1-1/4" to grip internally 1" to 2-1/2"
• Adapts to both 3/4" x 16 tpi and 1" x 8 tpi spindles

Features

• 3" diameter for small and medium face plate turnings
• 1"/8 right hand thread fits standard headstocks
• Pre-drilled holes for mounting the workpiece

Reviews (1)

Nice face plate
This is a well made face plate except threading inside of plate is a little rough but, it does thread on correctly. It is very high priced compared to the quality of metal it is made out of. Made out of aluminum or white metal can't tell which. ... Read more

Features

• 1-1/4-inch, 8 thread per-inch insert

Product Description

1/2" Standard scraper round nose. Scrapers are used for light finishing cuts and where the use of a cutting tool is either not possible or desirable. Diamic Brand woodturning tools have been hand made by Henry Taylor craftsmen in Sheffield England for over 150 years. The manufacture of these tools marries traditional hand crafting skills with modern heat-treating and finishing technologies to give the quality of design and edge retaining properties demanded by turners today. The proprietary alloy of steel and trace metals used by Henry Taylor yields a high-speed steel unequaled by other manufacturers. The Cutting Edge carries only high-speed steel turning tools. Although they are slightly more expensive than carbon steel tools, the heat and abrasion resisting properties of this steel produces a superior, long-lasting edge. In addition, high-speed steel is extremely resistant to accidentally drawing the temper during grinding. ... Read more

Features

• Made with the best high speed steel
• More heat and abrasion resistant than carbon steel
• Hand Forged
• Handled

Product Description

The Cole jaws are a very versatile set designed primarily for the re-chucking of bowls to remove chuck marks or to re-shape the bottom of bowls that have already been turned. There is also provision to mount the 50mm, Step, and 100mm jaws onto the Cole jaws which enhances their use considerably. All the facilities of the other jaw sets can be fully utilised in conjunction with the Cole jaws. These jaws more than any other really begin to explore the tremendous versatility of the Nova Chuck. A special woodworm screw (optional) can be used for initial bowl mounting. With this combination of holding methods, it is possible to turn a bowl from rough blank to a completely finished smooth bowl with just this one jaw set. The Nova Chuck Cole jaw combination is the only chucking system to allow such a complete facility without any complex jaw changes or different set ups. There are a number of re-chucking options; false wooden jaws can be added, wooden dowels used or rubber stoppers which are provided with the basic kit. ... Read more

Features

• Full size Cole Jaws - holds bowls up to 10"
• Fits Original Nova, Supernova, Titan, and Midi chucks.
• Please see item description for more details.

Features

• Work well on wood lathes
• Constructed for large, hollow work pieces like pipes, tubing and other material that would "swallow" a regular live center
• MT#3 X 4"
• Donât worry about dust getting in the bearings-they're sealed!

Product Description

Perfect for any shop, handyman or hobbyist. Rugged construction! Heavy duty brake will bend 18-gauge sheet metal and 16-gauge nonferrous metals (like aluminum and brass) up to 30in. wide. Quick and easy adjustments for multiple bends to almost any angle. C-clamps sold separately. U.S.A. ... Read more

Features

• 12 in. bending handles with knobs provide additional leverage for easy bending
• Mounting holes in base for stationary or protable applications
• Makes perfect bends to over 90 degrees
• Ideal for shops, schools, hobbyists, service trucks, body shops, heating and cooling ducts, production runs or one time fabrication of boxes, covers, trays, etc.

Features

• Parting tool for dividing the work into sections before shaping
• High grade alloy steel maintains an edge longer
• Precision ground for smoother cutting
• 14" hardwood handles for better control

Features

• 1/4-inch round nose scraper, 1/4-inch diamond parting tool, 1/8-inch standard parting tool
• Detail turning tools
• Five-piece HSS set
• Canvas carrying pouch
• 1/4-inch gouge and 1/8-inch gouge

Reviews (2)

Fair set, only really for detail
When purchasing a new lathe, I mentioned I was interested in smaller projects like chess pieces and pens. The salesman referred me to this set for these kinds of projects -- and said this would be "all I need". When I got home and set everything up, I was a bit disappointed to realize that I did indeed need other tools -- especially a good gouge. I've since spent almost twice the price of these on additional tools. Once you have wood shaped to approximate size, these tools do indeed work well. Consider these tools as a supplement to your existing turning tools.

Pros:
+ Well made
+ high speed steel tools stay sharp even after a fair amount of use
+ Best set I've found for most detailing

Cons:
- more variety of tools would be good
- Included pouch is difficult to quickly remove and replace tools -- requires 2 hands.

fisk
good lathe and tools dont bent on small stuff sharp.. very good on small items nobs pens etc. easy to sharpen. ... Read more