Product Description

Ground, high speed steel.5% COBALT toolbits will take more heat than M2 high speed toolbits. ... Read more

Features

• Size: 1/2"

Product Description

Ground, high speed steel. MOLY toolbits are M2 H.S. steel-good general purpose. ... Read more

Features

• Size: 1/2"

Product Description

Ground, high speed steel. MOLY toolbits are M2 H.S. steel-good general purpose. ... Read more

Features

• Size: 1/2"

Product Description

Precision ground. ... Read more

Features

• Size: 1/4"
• Height: 3/4"
• Length: 5"

Product Description

Precision ground. ... Read more

Features

• Size: 1/4"
• Height: 3/8"
• Length: 4"

Product Description

Sherline lathes are designed to accept ¼ cutting tools. A package of three pre-sharpened cutting tools is expensive compared to buying them as blanks and sharpening yourself on a bench grinder. Complete instructions on how to grind the proper angles can be found on the Sherline web site. ... Read more

Features

• ¼ x 2-1/2 High Speed Steel blanks can be sharpened on bench grinder
• Make your own LH, RH, boring, internal threading or form tools
• Save money compared to buying pre-ground tools

Product Description

Sherline lathes are designed to accept ¼ cutting tools. This set includes 5 blank tools and offers a substantial savings compared to buying five of them one at a time. A package of three pre-sharpened cutting tools is expensive compared to buying them as blanks and sharpening yourself on a bench grinder. Complete instructions on how to grind the proper angles can be found on the Sherline web site. ... Read more

Features

• ¼ x 2-1/2 High Speed Steel blanks can be sharpened on bench grinder
• Make your own LH, RH, boring, internal threading or form tools
• Save money compared to buying pre-ground tools

Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 1/4"
• Length: 3 3/4"
• Tapered .0005" per inch. Undersize at small end.

Product Description

Brazed tip carbide tools offer the hardness of carbide at less than the cost of a set of HSS tools. Small carbide tips are brazed to the ends of ¼ tool shanks. Though not replaceable when they chip or get dull, these tools are so inexpensive that it offsets some of the advantage of inserted tip carbide toolsparticularly if you have only an occasional job for them. If you like working with these tools, you might want to graduate to 3/8 shank inserted tip tools, but many machinists find these inexpensive ¼ shank carbide tipped tools work just fine for their purposes. ... Read more

Features

• ¼ shank tools fit in standard Sherline tool posts
• Includes pre-ground RH, LH and 60° threading tools
• Used for cutting hard materials like stainless steels or titanium
• Gives good finishes on hard or softer materials
• Allows for higher cutting speeds and more rapid material removal

Product Description

High speed steel tools are suitable for most machining tasks unless you plan to cut extremely hard metals. This set of three pre-ground cutting tools will handle most jobs done on the lathe. Included are a left-hand, right-hand and a boring tool. Each is sharpened to the correct tip height for use with Sherline tools. ... Read more

Features

• Set includes pre-ground HSS right-hand, left-hand and boring tools
• Complete instructions on how to grind your own tools included

Product Description

Ground, high speed steel. 5% COBALT toolbits will take more heat than M2 high speed toolbits. ... Read more

Features

• Size: 1/4"

Product Description

Ground, high speed steel. 5% COBALT toolbits will take more heat than M2 high speed toolbits. ... Read more

Features

• Size: 1/4"

Product Description

Ground, high speed steel. MOLY toolbits are M2 H.S. steel-good general purpose. ... Read more

Features

• Size: 1/4"

Product Description

Ground, high speed steel. MOLY toolbits are M2 H.S. steel-good general purpose. ... Read more

Features

• Size: 1/4"

Product Description

Hardened and ground. Tapered .0005" per inch. Undersize at small end. ... Read more

Features

• Diameter: 1/8"
• Length: 2 1/2"
• Tapered .0005" per inch. Undersize at small end.

Product Description

Ground, high speed steel. 5% COBALT toolbits will take more heat than M2 high speed toolbits. ... Read more

Features

• Size: 1/8"

Product Description

Ground, high speed steel. M2 HS steel is a good general purpose toolbit. ... Read more

Features

• Size: 1/8"

Product Description

Cast-iron adapters for lathe chucks. Please look at the picture for the key to 'A', 'B','C','D','E' dimensions. ... Read more

Features

• A: 10 1/2"
• B: 5"
• C: 1 1/2"
• D: 3"
• E: 1 1/4"

Product Description

Cast-iron adapters for lathe chucks. Please look at the picture for the key to 'A', 'B','C','D','E' dimensions. ... Read more

Features

• A: 10 1/4"
• B: 4 1/2"
• C: 2"
• D: 3 1/2"
• E: 1 1/4"

Product Description

Cast-iron adapters for lathe chucks. Please look at the picture for the key to 'A', 'B','C','D','E' dimensions. ... Read more

Features

• A: 10 3/4"
• B: 6"
• C: 2 3/4"
• D: 4 1/8"
• E: 1 1/8"