Product Description

L.E.D. (Light Emitting Diode) lighting gives extra brightness and longer life than conventional bulbs. All Pacer L.E.D. lights mount with two-sided tape. The compact, slimline design allows a great variety of mounting location options. Simple 2 wire hookup. All kits packed in attractive blister pack and available in a variety of styles. ... Read more

Features

• 12 L.E.D. Light Kit Available Single or twin Pack. Twin Pack installation works well as 3rd brake and turn signal indicators. Each light is 4-5/8" long x 7/16" w x 3/4" h. Available in Red or Amber
• L.E.D. 20 Light Kit For use when extra length is required. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 8" long x 5/8" w x 7/8" h. Available in Red or Amber.
• L.E.D. 16 Light Kit Twin row gives extra brightness concentration. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 3-5/8" long x 1 " w x 3/4" h. or Amber.
• L.E.D. 6 Light Kit (5 L.E.D's per light) Smallest L.E.D. available. Use as marker, clearance or courtesy light. Each light is 2-1/4" long x 7/16" w x 3/4" h. Available in Red or Amber
• X-Shaped L.E.D. One of a kind L.E.D. light. Sold in pairs in blister packs. Each light is 1-3/4" long x 1-3/4" w x 3/4" h. Available in Red or Amber

Product Description

As part of our LED line, SoftStix tubes have an intense glow, but can also be bent into any shape to fit anywhere! SoftStix are unbreakable and can be twisted or bent into any position. Chrome endcaps give a customized look to any vehicle. SoftStix can be plugged into a cigarette lighter adapter or be permanently installed with a simple 2-wire installation. Just like the rest of our LED Line, SoftStix are backed up with the PlasmaGlow Lifetime Warranty. ... Read more

Features

• Two tubes included in each pack
• Bends to any shape to fit anywhere
• Chrom endcaps give a stylish customized look
• Endcap can be removed and the tube can be tut to a custom length
• Lifetime Warranty.

Features

• Grommet mount FRONT/PARK/TURN with 52 5mm super bright LED diodes
• Solid state circuitry. Voltage: 7.7 - 14.0 VDC Power draw: 310 milliamps
• High impact polycarbonate lens and housing for superior light distribution. Ultra sonic welded lens and housing
• Moisture, vibration and corrosion proof
• 100,000 hour rated life

Product Description

Maxxima M20332R Red Clearance/Marker Lamp ''Peterbilt Style'', Stainless Steel Bezel, 2-Bullet Conn Width 6.1875'' / Height 1.875'' / Depth .9375'' Surface Mount ... Read more

Features

• Stainless Steel Bezel
• Completely Sealed Electronics
• Bullet and Ring Connectors
• Fits Standard Truck-Lite Connector & Grommet
• Solid State Circuit Boards are Designed at 7.7 - 14.0 VDC for 100,000 Hour Rated Life

Product Description

This amazing product allows you to pull over to the side of the road with no fear. The SDL series of Maxxima lighting are created to provide comfort, security and safety when making emergency stops along the side of a busy road. All cars, trucks and RVs should keep an SDL light at all times in case of emergency. Maxxima's specialized engineering provides highly durable and long lasting LED lights to ensure youll never get caught in the dark. ... Read more

Features

• LED Lamp Visible up to 1-1/4 Miles (2000 Meters)
• 2 Functions: Warning Flasher & Steady Beam
• Strong Magnets Instantly Attach to Vehicle, Weather Resistant
• Converts to Warning Lamp with Built-In Stand
• Requires 4AA Batteries (Not Included)

Product Description

L.E.D. (Light Emitting Diode) lighting gives extra brightness and longer life than conventional bulbs. All Pacer L.E.D. lights mount with two-sided tape. The compact, slimline design allows a great variety of mounting location options. Simple 2 wire hookup. All kits packed in attractive blister pack and available in a variety of styles. ... Read more

Features

• 12 L.E.D. Light Kit Available Single or twin Pack. Twin Pack installation works well as 3rd brake and turn signal indicators. Each light is 4-5/8" long x 7/16" w x 3/4" h. Available in Red or Amber
• L.E.D. 20 Light Kit For use when extra length is required. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 8" long x 5/8" w x 7/8" h. Available in Red or Amber.
• L.E.D. 16 Light Kit Twin row gives extra brightness concentration. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 3-5/8" long x 1 " w x 3/4" h. or Amber.
• L.E.D. 6 Light Kit (5 L.E.D's per light) Smallest L.E.D. available. Use as marker, clearance or courtesy light. Each light is 2-1/4" long x 7/16" w x 3/4" h. Available in Red or Amber
• X-Shaped L.E.D. One of a kind L.E.D. light. Sold in pairs in blister packs. Each light is 1-3/4" long x 1-3/4" w x 3/4" h. Available in Red or Amber

Product Description

These mini LED Lights are available in 4 styles.Single row 12 LED Lights, Single row 20 LED Lights, Double row 16 Lights and a 10 LED side or fender light ... Read more

Features

• The popular LED lights are available in blue or white with a clear lens
• Easy installation these lights mount with two-sided tape
• LED lights add a custom look to your vehicle
• Simple two-wire installation. These LED has a low power draw and a long life
• Choose from: Single Row 12 LED Lights Dimensions: 4-5/8"L x 7/16"W x 3/4"H. Single Row 20 LED Lights Dimensions: 8"L x 5/8"W x 7/8"H. Double Row 16 LED Lights Dimensions: 3-5/8"L x 1"W x 3/4"H. 10 LED Side/Fender Lights Dimensions: 3-1/8"L x 1-3/8"W x 5/8"H.

Product Description

L.E.D. (Light Emitting Diode) lighting gives extra brightness and longer life than conventional bulbs. All Pacer L.E.D. lights mount with two-sided tape. The compact, slimline design allows a great variety of mounting location options. Simple 2 wire hookup. All kits packed in attractive blister pack and available in a variety of styles. ... Read more

Features

• 12 L.E.D. Light Kit Available Single or twin Pack. Twin Pack installation works well as 3rd brake and turn signal indicators. Each light is 4-5/8" long x 7/16" w x 3/4" h. Available in Red or Amber
• L.E.D. 20 Light Kit For use when extra length is required. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 8" long x 5/8" w x 7/8" h. Available in Red or Amber.
• L.E.D. 16 Light Kit Twin row gives extra brightness concentration. When used as third brake on domestic vehicles, logic module # 20-702 is required (see below). Each light is 3-5/8" long x 1 " w x 3/4" h. or Amber.
• L.E.D. 6 Light Kit (5 L.E.D's per light) Smallest L.E.D. available. Use as marker, clearance or courtesy light. Each light is 2-1/4" long x 7/16" w x 3/4" h. Available in Red or Amber
• X-Shaped L.E.D. One of a kind L.E.D. light. Sold in pairs in blister packs. Each light is 1-3/4" long x 1-3/4" w x 3/4" h. Available in Red or Amber

Product Description

Required when using single light as third brake light on vehicles with combined brake and turn signal lamps (most domestic vehicles). Filters out turn signal input. ... Read more

Features

• Logic module is for LED Light Kits
• Filters out turn signal input
• Required for pacer performance LED 20 Light Kit part #20-708 & 20-709 and LED 16 Light Kit part #20-710 & 20-711
• Made by Pacer Performance Products
• Distributed by RealTruck

Features

• Polycarbonate lens and housing for superior light distribution
• Voltage: 7.7 - 14.0 VDC Power draw: 318 milliamps
• Surface mount with standard 4 hole mounting pattern. Includes mounting gasket
• Sealed electronics are moisture, corrosion and vibration proof
• Limited lifetime warranty. 100,000 hour rated life

Features

• Innovative optic design allows one light the ability to function as two
• Electronics completely sealed in epoxy to resist corrosion and moisture
• Uses standed mounting holes for 6 in. x 2 in. markers (4.75 in. hole centers)
• Includes SureSeal plug and pigtail (1 bullet / 1 ring)
• Current draw: .05 amp

Product Description

This amazing product allows you to pull over to the side of the road with no fear. The SDL series of Maxxima lighting are created to provide comfort, security and safety when making emergency stops along the side of a busy road. All cars, trucks and RVs should keep an SDL light at all times in case of emergency. Maxxima's specialized engineering provides highly durable and long lasting LED lights to ensure youll never get caught in the dark. ... Read more

Features

• LED Lamp Visible up to 1-1/4 Miles (2000 Meters)
• 2 Functions: Warning Flasher & Steady Beam
• Strong Magnets Instantly Attach to Vehicle, Weather Resistant
• Converts to Warning Lamp with Built-In Stand
• Requires 4AA Batteries (Not Included)

Product Description

30" LED color changing tube for the 2.1 million color kits. ... Read more

Features

• 30" LED color changing tube for the 2.1 million color kits.
• Lifetime Warranty

Product Description

Bring lighting where its never gone before, with PlasmaGlow Motorcycle/ATV Lighting Kits! Each Kit contains everything you need to add style to your Motorcycle or ATV, as well as highlight your modifications or special parts. Included are 6 undercarriage LED domes to provide a glow under your Motorcycle or ATV, on the asphalt or off. These protective Lexan domes contain wide angle LEDs for a wide-spread glow, no matter how low your bike is! Also included are 4 Extreme LEDs, PlasmaGlows ultimate compact lighting accessory, for accenting your chrome, engine or custom modifications. Every part of this kit is lightweight and durable to withstand the hazards of a low slung or off-road vehicle. All necessary installation hardware is included. ... Read more

Features

• Super wide angle LED's spread out the glow on low clearance areas.
• Special compact design for motorcycles and ATV's
• 4 Extreme LED's included to highlight your chrome.
• Lifetime Warranty

Product Description

Dual-Color SoftStix harness the power of two tubes into one! These multi-color tubes are exactly what you need to customize your ride! Our Dual-Color tubes look a different color depending on the angle you are viewing them from and appear to change color as you walk by! Dual-Color SoftStix are unbreakable and can be twisted or bent into any position. Dual-Color SoftStix can be plugged into a cigarette lighter adapter or be permanently installed with a simple 2-wire installation. Just like the rest of our LED Line, Dual-Color SoftStix are backed up with the no-hassle PlasmaGlow Lifetime Warranty! ... Read more

Features

• Two tubes included in each pack
• Bends to any shape to fit anywhere
• Two colors in one tube! Looks like a different color from different angles.
• Endcap can be removed and the tube can be tut to a custom length
• Lifetime Warranty.

Product Description

As part of our LED line, SoftStix tubes have an intense glow, but can also be bent into any shape to fit anywhere! SoftStix are unbreakable and can be twisted or bent into any position. Chrome endcaps give a customized look to any vehicle. SoftStix can be plugged into a cigarette lighter adapter or be permanently installed with a simple 2-wire installation. Just like the rest of our LED Line, SoftStix are backed up with the PlasmaGlow Lifetime Warranty. ... Read more

Features

• Two tubes included in each pack
• Bends to any shape to fit anywhere
• Chrom endcaps give a stylish customized look
• Endcap can be removed and the tube can be tut to a custom length
• Lifetime Warranty.

Product Description

As part of our LED line, SoftStix tubes have an intense glow, but can also be bent into any shape to fit anywhere! SoftStix are unbreakable and can be twisted or bent into any position. Chrome endcaps give a customized look to any vehicle. SoftStix can be plugged into a cigarette lighter adapter or be permanently installed with a simple 2-wire installation. Just like the rest of our LED Line, SoftStix are backed up with the PlasmaGlow Lifetime Warranty. ... Read more

Features

• Two tubes included in each pack
• Bends to any shape to fit anywhere
• Chrom endcaps give a stylish customized look
• Endcap can be removed and the tube can be tut to a custom length
• Lifetime Warranty.

Features

• Meets P2PC requirements for 45 degree mounting
• Epoxy resin coated , solid state circuit boards are designed at 7.7 - 14.0 VDC
• One piece sealed unit. No mounting base required. Includes gasket.
• Fits standard 3 in. mounting holes. Terminals: bullet terminal / ring terminal
• 100,000 hour rated life