Features

• Features 1-3/8" Cutter Capacity and light weight drill for plant maintenance, steel erection, construction with magnetic holding strength of 2200 lbs and weighing only 28 lbs
• It has 1200 watts of power for cutting holes up to 1-3/8" in diameter in structural steel, iron, stainless and exotic alloys and is excellent for making interrupted holes. It features a 2" depth of cut.
• It has an external coolant system and comes in a handy light weight plastic carrying case
• It features a 3/4" Weldon Style Arbor

Product Description

Drills 7/16" - 2" holes. Arbor system provides auto-lubrication and slug ejection. Push button reversible feed handle Includes: 5 ft. safety strap. Reversible side handle. ... Read more

Features

• Chuck Size: 1/2".
• Amps: 6.0.
• No Load RPM: 450.

Product Description

Drills 7/16" - 2" holes. Arbor system provides auto-lubrication and slug ejection. Push button reversible feed handle Includes: 5 ft. safety strap. Reversible side handle. ... Read more

Features

• Chuck Size: 1/2".
• Amps: 10.0.
• No Load RPM: 375.

Features

• Limited warranty, 30-day no-risk trial
• 120 Volt AC only, 12.5 amp max. rating
• 9 inch drill travel
• Fixed position, variable speed base
• For use on any flat ferrous material, 1/2 inch and thicker

Features

• Limited warranty, 30-day no-risk trial
• 1/2-inch capacity; 7.2 amp motor; 600 rpm
• Solid state electronic switching
• Feedback speed control
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Features

• Limited warranty, 30-day no-risk trial
• 1-1/4-inch capacity; 12.5 amp motor; 500/250 rpm
• Solid state electronic switching
• Feedback speed control
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Features

• ALL COMPENTS DESIGNED AND BUILT BY FEIN
• Compact and lightweight--only 22 lbs
• Fein's Quick-In bit change system--also accepts most competitive bits
• 1-1/4" anular capacity , 1/2 twist drill capacity, 3 Jaw Chuck Included
• 440 RPM, 1982 lbs holding power, 10-1/4 inch stroke

Features

• ALL COMPENTS DESIGNED AND BUILT BY FEIN
• Compact and lightweight--only 26 1/2 pounds
• Fein's Quick-In Bit change system; also accepts most competitive bits
• 2-inch anular capacity, 5/8 twist drill capacity, 3 Jaw Chuck included
• 260/520 RPM, 2472 holding power, 12 3/16 inch stroke

Features

• Limited warranty, 30-day no-risk trial
• 3/4-inch capacity; 12.5 amp motor; 350 rpm
• Solid state electronic switching
• Feedback speed control
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Reviews (1)

Dedicated to it's job.
Although this tool is some what limited in use it performs excellent for the purpose it was designed for. I have used this tool to drill and tap many holes in machine bases and bolster plates that were too large or could not be moved to a drill press. With a good lay out job and heavy center punch you can accurately place the Mag Drill on center each time. The base of the tool is also a de-magnetizer for easy removal of chips and clean up. ... Read more

Features

• Limited warranty, 30-day no-risk trial
• 3/4-inch capacity; 12.5 amp motor; 350 rpm
• Solid state electronic switching
• Feedback speed control
• Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line

Product Description

Ideal for shop & hobbby use. Drills metal, plastic & wood. 1/2" spring loaded chuck with protective guard and 2-1/2" vise. Fully adjustable machined table tilts 45 degrees left and right ... Read more

Features

• Ideal for shop & hobbby use.
• Drills metal, plastic & wood.
• 1/2" spring loaded chuck with protective guard and 2-1/2" vise
• Fully adjustable machined table tilts 45 degrees left and right
• Cast iron construction, CSA approved

Features

• Features 1-1/4" Cutter Capacity and light weight drill for plant maintenance, steel erection, construction with magnetic holding strength of 2200 lbs and weighing only 36lbs
• It has 1200 Watts for plenty of power for cutting holes up to 1-1/4" in diameter in structural steel, iron, stainless and exotic alloys and is excellent for making interrupted holes. It has a 2" depth of cut.
• It has an external coolant system and comes in a handy light weight plastic carrying case
• A built in sensor applies smooth and even pressure and withdraws when drilling is complete in the automatic mode.

Features

• Features1-3/8" Cutter Capacity and light weight drill for plant maintenance, steel erection, construction with magnetic holding strength of 2200 lbs and weighing only 36 lbs
• It has 720 watts of power for cutting holes up to 1-3/8" in diameter in structural steel, iron, stainless and exotic alloys and is excellent for making interrupted holes. It is capable of up to a 6" depth of cut.
• Its has a built in cutting fluid reservoir in the arbor, reversible handles for use in restrictive operating conditions
• It has a quick change arbor for support and conversion from cutter to drill chuck

Features

• Features 2" Cutter Capacity and light weight drill for plant maintenance, steel erection, construction with magnetic holding strength of 3300 lbs and weighing only 44 lbs
• It has 1200 watts of power for cutting holes up to 2" in diameter in structural steel, iron, stainless and exotic alloys and is excellent for making interrupted holes.
• It has an internal coolant system and verticical travel of up to 8" and drill capacity of 1"
• It has a quick change arbor for support and conversion from cutter to drill chuck

Product Description

Milwaukee 4203 The 4203 Electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. Feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker. Includes base only. Product Features 120 Volt AC only, 12.5 amp max. rating 11 inch drill travel Adjustable position, variable speed base For use on any flat ferrous material, 1/2 inch and thicker ... Read more

Features

• Limited warranty
• 120 Volt AC only, 12.5 amp max. rating
• 11 inch drill travel
• Adjustable position, variable speed base
• For use on any flat ferrous material, 1/2 inch and thicker

Features

• Powerful 9.0 Amp motor
• High-strength two-coil magnet
• User-friendly two-button control panel
• Left/right toolless feed handle mount
• Includes lubricant hand pump and safety strap