Product Description

This is the colossus of knee mills! This machine is so rugged and heavy-duty that you'll have to see it to believe it. Start with a table that measures 12" X 54" X 4", that's hardened and precision ground and moves with a 3 axis power feed system. That's right, the knee has it's own own rapid traverse only powerfeed. And of course, the quill has its own feed rates of .0015", .003" and .006" with auto stop and return. Spindle speeds are easy to control with just a twist of the dial and it's variable from 90-3800 RPM. The hard chrome quill also means a lifetime of accurate, trouble free service. Other features include: variable bet and pulley power transfer; 5" spindle travel; 12" x 54" table dimensions; 36-1/2" maximum distance from spindle to column; 16" maximum distance from spindle to table; 15-7/8" knee travel; 3 T-slots on 2-1/2" centers, 1/2" stud; shielded bearings which are lubricated for life; shop pump lubrication system; auto down feed; auto stop with micro-adjustable setting; NT#40 spindle; quill feed rates of .0015", .003" and .006"; longitudinal power feed; cross slide power feed; knee power feed; Digital Read-Out for X and Y axis; 5/8" - 11 drawbar; approximate shipping weight of 3400 lbs. ... Read more

Features

• Head tilt of 45 degrees both ways; head swivel of 90 degrees both ways
• Meehanite casting
• Motor: 5 HP, 220V, 3-phase, 1725 RPM
• Table travel of 28" longitudinal, 15-1/4" cross, 13-1/4" vertical
• Variable speed range: 90-3800 RPM

Reviews (1)

precise!
this machine is a dream come true to all of us who have to make precise hole patterns, fully programable, no more guessing where the hole is gonna end! ... Read more

Features

• Quality auto-stop carbon brushes: protect the motor from worn-down carbon brushes
• FLEX four-fold full-wave electronics: with speed selection and consistent speed control, smooth starting, overload protection
• Aluminium guide carriage: with plastic balls for easy control, corrosion-protected
• GFCI circuit breaker: integrated into the power cord
• Quick-action, brass coupling: for 1/2" water hoses

Features

• Quality auto-stop carbon brushes: protect the motor from worn-down carbon brushes
• FLEX four-fold full-wave electronics: with speed selection and consistent speed control, smooth starting, overload protection
• Aluminium guide carriage: with plastic balls for easy control, corrosion-protected
• GFCI circuit breaker: integrated into the power cord
• Quick-action, brass coupling: for 1/2" water hoses

Features

• Stand not included
• 1HP, 1Ph, 115/230V motor (Prewired 115V)
• Belt cover has a quick slide latch to allow faster belt adjustment
• Heavy duty tapered roller bearings support the spindle
• Positive quick-stop knob and an easy-to-read internal depth gauge

Features

• 8 spindle speeds ranging from 80-2720 RPM
• X-axis powerfeed installed
• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• 16 spindle speeds ranging from 80-5440 RPM
• X-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• Work piece can be up to 500 pounds
• 1.5HP, 1Ph, 115/230V motor(Prewired 115)
• 10.5" of ram travel
• Collet capacity is 1/8-7/8 inches
• 5 spindle speeds ranging from 240-1550 RPM

Features

• Work piece can be up to 500 pounds
• 1.5HP, 3Ph, 230V motor
• 10.5" of ram travel
• Collet capacity is 1/8-7/8 inches
• 10 spindle speeds ranging from 120-1550 RPM

Features

• Work piece can be up to 720 pounds
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• Variable spindle speeds with a range of 70-3800 RPM

Features

• Built with coolant system(coolant pump not included)
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 16 spindle speeds ranging from 80-5440 RPM

Features

• Built with coolant system(coolant pump not included)
• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches
• 8 spindle speeds ranging from 80-2720 RPM

Features

• 16 spindle speeds ranging from 80-5440 RPM
• X and Y-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• 16 spindle speeds ranging from 80-5440 RPM
• Acu-Rite Microline DRO and X-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• 8 spindle speeds ranging from 80-2720 RPM
• Acu-Rite 200M DRO and X-axis powerfeed installed
• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• Variable spindle speeds with a range of 70-3800 RPM
• Anilam WIZARD 211 DRO and X-axis powerfeed installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• Variable spindle speeds with a range of 70-3800 RPM
• Acu-Rite 200M DRO and X-axis powerfeed installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• Variable spindle speeds with a range of 70-3800 RPM
• X-axis powerfeed installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• 16 spindle speeds ranging from 80-5440 RPM
• Anilam WIZARD 211 DRO and X-axis powerfeed installed
• 2HP, 3Ph, 2-speed, 230V motor
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• Variable spindle speeds with a range of 70-3800 RPM
• X and Y-axis powerfeeds installed
• 3HP, 3Ph, 230/460V motor (Prewired 230V)
• 21.25" of ram travel
• Collet capacity is 1/8-7/8 inches

Features

• 8 spindle speeds ranging from 80-2720 RPM
• Acu-Rite 200M 3-axis(Quill) DRO and X and Y-axis powerfeeds installed
• 2HP, 1Ph, 115/230V motor (Prewired 230V)
• 12.25" of ram travel
• Collet capacity is 1/8-7/8 inches