Features

• No-mar pad full soft grip
• FinishPro35 drives 15 gauge finish nails 1-1/4"-2-1/2"
• Easy-clear latch to clear jams
• One-year warranty
• Adjustable depth-of-drive and adjustable exhaust

Features

• Costs less than the chiropractor
• Saves your back
• Fits virtually any pneumatic nailer
• 5 angle adjustments
• Hose holder

Features

• Grease loads easily with standard 14 oz. cartridge, pressure filler or bulk
• Includes 9" flexible hose for hard-to-reach fittings

Features

• Tool set for 3/4" flooring, also included 1/2" flooring adaptor kit (shoe and bumper)
• High speed mallet actuated pnermatic operation increases productivity.
• Extra wide composite base plate for added stability.
• Strong, light weight, only 9 lbs, 2 lbs less weight than competition.
• Mallet and extra o-ring kit included

Features

• Includes 760 staples, safety glasses, wrenches, lubricating oil and case
• Jams are cleared by simply opening the magazine
• Shoots 3/8" crown & 1/4" fine wire staples

Product Description

Professional Electric Staple/Brad Nail Gun With Blow Molded Case. ... Read more

Product Description

Arrow's ProShot 1 Electric Brad Nail Gun features solid state reliability and hardened high carbon steel working parts. This professional grade brad nail gun has trigger and surface contact safety locks, a non-marring tip, and a nail penetration adjustment dial. It comes with a durable, custom molded storage case and a 10-foot power cords, and uses a number 12 extension cord. The ProShot 1 shoots four different size 18 gauge brads: 5/8-inch, 3/4-inch, 1-inch and 1-1/4-inch. ... Read more

Features

• Hardened high carbon steel working parts
• Penetration adjustment dial
• Shoots 4 different size 18 gauge brads: 5/8", 3/4", 1" and 1-1/4"
• Solid state circuitry
• Trigger and surface contact safety locks

Product Description

THIS IS A BRAND NEW MODEL CHIG148 21º AIR NAILER, USES 10-1/4 TO 11-1/2 GAUGE 2-1/8" TO 3-1/2" NAILS STICK FED, DIE CAST LIGHTWEIGHT BODY, 55-95 PSI, 7 - 9 SCFM, 1/4'' NPT INLET, NARROW NOSE FOR ACCURATE NAILING, LARGE PISTON FOR INCREASED POWER, 21 DEGREE ANGLE, 360 DEGREE ADJUSTABLE AIR DEFLECTOR, RUBBER COMFORT GRIP, SAFETY TRIGGER ... Read more

Features

• Fast Framing Nailer
• use 10-1/4 to 11-1/2 gage nails
• 21 degree
• Die Cast Lightweight
• Narrow Nose

Product Description

Our 16 ga. Nailer is the best thing to hit the pneumatic market in years. Weighing in at only 3.21 lbs. it can still deliver the punch necessary to drive 2" nails all day without wearing you out. Operates at 80 â 110 PSI. Includes 500 2" brads and 500 1 1/2" brads. ... Read more

Features

• 100 shot magazine
• Quick release nose
• Safety trigger
• Shoots up to 2" 16 ga. brads
• Single shot or bump fire switch mode

Product Description

COMPRESSOR OIL - 1 Pint ... Read more

Product Description

TOOL OIL - 8 oz. ... Read more

Features

• Great for routine maintenance to keep nailer operating at peak performance
• Replaces worn or broken driver blade
• Original equipment replacement for a perfect fit
• Fits Porter-Cable FN250A Finish Nailer

Product Description

Ergonomically comfortable nailer with high-impact housing is ideal for any size jobs. Powerful 14.5 Amp motor shoots up to 3/8in. to 1 1/4in. brad nails. ... Read more

Features

• 14.5 Amp nailer
• Quick7release magazine for easy reloading
• Contact safety mechanism prevents accidental firing
• Plastic angled tip is designed for hard7to-reach areas and prevents surface damage
• 10ft. cord

Product Description

MODEL #CHIG141-02 ACCEPTS 16 GAGE BRADS FROM 1-1/4" TO 2-1/2" LONG FOR FINISH NAILING. AIR PRESSURE = 60 - 100 PSI, AIR CONSUMPTION: 8.9 CFM, 1/4" NPT INLET, ONE YEAR LIMITED MANUFACTURERS WARRANTY. QUICK RELEASE NOSEPIECE FOR FAST JAM RELEASING, 360 DEGREE EXHAUST, SOFT RUBBER HANDLE FOR COMFORTABLE GRIP, COMES WITH: SAFETY GOGGLES, CONTAINER OF LUBE OIL, THREE ALLEN WRENCHES AND NAILS, STURDY MOLDED PLASTIC CASE FOR EASY STORAGE AND PROTECTION, PERFECT FOR TRIM WORK AND MOST DETAIL JOBS. ... Read more

Features

• Uses 1-1/4" to 2-1/2" long finish nails
• Heavy Duty Construction
• Lightweight
• Easy to use

Product Description

Absorbs moisture to prevent rust and corrosion. Only use specially compounded AIR TOOL OIL to lubricate the internal parts of air-driven tools. Regular use prolongs tool life and improves performance. 12 fl oz. plastic bottle with applicator. ... Read more

Features

• Absorbs moisture to prevent rust and corrosion
• Lubricates the internal air-driven tool parts
• Prolongs tool life and improves performance
• 12 fl oz. plastic bottle with applicator

Product Description

Arrow's Electro-Matic Staple Gun Tacker has a one-piece solid steel base construction, impact-resistant housing, solid-state electronic circuitry, a safety trigger lock, a patented jam-proof mechanism, and trigger-squeeze speed and ease of operation. This staple gun tacker is lightweight, compact, and extremely well balanced for tireless use, with a hand-contoured handle grip for comfort. The ET50 staple gun uses six different sizes of staples (1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 9/16-inch, and 17/32-inch). It is used by building contractors, do-it-yourselfers, and specialty trade applicators for tacking insulation, ceiling tile, window screening, upholstering, carpet padding, fence wire, cornerite, and other jobs ranging from light to heavy duty work. ... Read more

Features

• Lightweight, compact, and extremely well balanced
• One-piece solid steel base construction, impact-resistant housing
• Solid-state electronic circuitry
• Uses 6 sizes of staples: 1/4", 5/16", 3/8", 1/2", 9/16", and 17/32"

Features

• Compact design for tight spots
• Operates by hand pressure
• Magnetic off-set nose piece to hold nail in place
• Die cast aluminum body for operator comfort & safety

Amazon.com Review

Great for all kinds of finish and trim work, this Trimpulse finish nailer from Paslode lets you avoid the hassle of compressor hoses and compressor noise. Its small (less than 12 inches long), lightweight body (5 pounds, 8 ounces) is easy to grip and, because you're not hooked to a hose, doesn't cause as much arm fatigue as other nailers. The nailer drives 3/4- to 2-1/2-inch nails and has easy-to-adjust drive depth, as well as a Quick-Clear feature that provides easy access to the nailer's nose if a jam occurs. This Paslode nailer also uses a patented system that requires both a fuel cell and an included rechargeable battery. We were impressed by the nailer's performance--it's consistent and there's plenty of power for most uses. This model will shoot up to 2,400 nails on a single fuel cell and up to 4,000 nails on a full battery charge. It also has a convenient belt hanger so you don't have to lay the gun on the ground or on top of a ladder, and the high-visibility orange makes it difficult to overlook. The kit includes a plastic carrying case, a lightweight charger, and safety goggles. Please note that the nailer does not come with the fuel cell included. --Jonathon Tudor ... Read more

Features

• Lasts all day
• Fast setup
• Lightweight
• Compact design
• Low fatigue

Reviews (13)

paslode is a winner Bammer is a BUMMER
I recently sent away and received a porter cable Bammer finish cordless nailing gun, and was it ever poor. it was so heavy and clumbsy that I could'nt hold it over my head and push the piston in, that's what you have to do to fire the nailer and it damned near threw my shoulder out of joint! Was I ever pleased when the paslode nailer I ordered in it's place came a week later. it was very light, and worked like a charm. I'm getting older, and I appreciate lightness, and ease of operation. THIS IS IT!

Works wonders
I owned the Porter Cable bammer before I purchased the impulse. What a mistake, the bammer should be called the bummer. The Paslode impulse works much, much better. I enjoy using it very much. I am glad someone can make a cordless nailer that works good!

Disappointed
When I first purchased this gun it performed like a dream, however, after the first brads things started to go wrong. These problems were not corrected even when thirty minutes is spent cleaning the gun as per the manufacturer's directions. I have faithfully used both the expensive de-greasers and lubricating oil to no avail. I appear to spend longer cleaning the bloody thing than actually using it.

After a thorough cleaning the gun works well for a short time and then the problems start. The gun will consistantly misfire, in that the nose will be depressed and the fan will start, but no combustion occurs. Originally I believed that it must have been the spark, but that appears to be okay.

I have returned this particular gun to the service agent on a number of occasions for the following reasons:

Split main o-ring
Fan motor burnt out
hole in the dust filter, failure to fire when contact element is lightly, but fully depressed.

Another major problem with this model is the spring in the magazine hold open device. This spring keeps the rear of the nails properly aligned. I have lost this spring, by vertue of it falling out, on no fewer than three occasions. I have now given up with this feature of the gun and it still seems to function okay.

Don't get me wrong I am not anti-paslode, . I own the framer and air fit out gun and their great tools, however this fit-out gun is a lemon. Steer well clear of it and purhaps look at some of the newer models. I wish I had, but I liked the ability to change between guages of the brads.

customer service
Living in Los Angeles must be the "out back" to Paslode, I purchased the tool with the understanding that nails and fuel cells could be purchased at places like Lowes and Home Depot or at best at local tool outlets. I have yet to find a retailer that sell the 18 guage nail, some do sell brads. I had to have the fuel cell UPS'ed from Oxnard Ca. I went on line and discussed the problem with Paslode. They could care less, they insist that fuel cells and nails are available(but they wouldn't sell me any????. So I continue to call tool supply stores and check larger retailers. The Paslode catalogue "on line fastener section" does not even refer to the nails in question. As far as performance, when using brads it works adequatly. So to any and all of you that are considering the purchase of this tool make sure that accessories and supplies are available Would I buy another produce-----NO.

Great nailer
I have this nailer and like it so well i am going to buy another. I also have a porter cable bammer finish nailer and it is the biggest piece of JUNK i ever bought
and i ruined my sholder using it... Thanks PASLOID for such easy product to use THANKS Harold Stanley 2833 58th st Fennville MI. 49408 ... Read more

Features

• Only for Porter-Cable pneumatic nailers models FN250A, NSS150 and RN175
• Includes all o-rings, bumpers, gaskets, and trigger valving
• Instruction manual and silicone grease included

Product Description

Specially Formulated for use in all piston type and rotary air tools as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. ... Read more