Amazon.com

Here's plenty of power, whatever your pneumatic needs are, and it goes where you need it on big, rugged tires and a telescoping handle. It has enough juice to keep two nailers going at once, and its huge capacity means a lot less down time on the job. Even when it does cycle, it's ready to go back to work in about 15 seconds. The oil-lube design is a plus in our book because it'll run quieter and last longer than oil-free models. Bravo to Porter-Cable for their removable two-port console design, too. Take it to your roughest job site and have no fear—it rolls like a dream, even up and down steps. Just for safety's sake, there's a great roll bar protecting the pump and motor. If you're a contractor looking for the right compressor, you've found it.--Kris Jensen-Van Heste ... Read more

Features

• 120 V/ 60 hertz/1 phase motor
• 2.5 hp single tank air compressor
• Oil-lube air compressor for maximum durability
• 150-PSI tank pressure for longer tool run time,
• Quiet motor is easy on eardrums

Reviews (5)

way to go porter cable BEST MACHINE ON THE MARKET
this my 2nd air compressor matter fact I was building a arbor for the back yard after pressure was reached for nailgun I work over 1 hour before the compressor recycled the only problem I have had is to set the pressure on the nail gun after about 2 tries it worked perfect. I really like the idea on the removeable gauge face the compressor stay in 1 spot and 50 to 100 feet you can attact the face to a fixed object so you can save on trips back to the compressor when you need another nailgun as in replaceing the framer to finishing gun .great idea porter cable WAY TO GO PORTER CABLE

Outstanding compressor
After using and wearing out several other compressors over the years, I have learned a thing or two about quality. While I use a couple of the DeWalt compressors in my business and am pleased, this PC is my new baby. Very quiet. Works well, as promised, on a 15amp circuit, and just generally well made. The wheels are GREAT. Removeable outlet/guage panel is a very good idea. Will easily run 2 framers unless the guys are very fast. Don't even think about buying the oil free version. The oiled units are quieter and have 3-4 times the lifespan of their oil free brothers.

Performs to expectations
I purchased the porter cable model C3551 after considering the Dewalt suitcase carry model. Although the Dewalt weighed 20 pounds less, I liked the Porter Cable model that rolls. I also had reservations about the number of Dewalt suitcase models being sold as referbished.

My C3551 arrived with a defective tank pressure guage. I called Porter Cable, and they are sending me a replacement guage. According to the output regulator, the cut-off pressure was right at 150 pounds and cut-in was near 120 pounds. The manual was easy to read and follow. The break-in procedure was simple and necessary. I believe it will operate a round head nailer and roofing nailer with moderate use as stated by the manufacturer. Both meet my needs. The noise level was not excessive, and a conversation can be carried without shouting.
I am very pleased with the performance. I specifically wanted an oil lube compressor for durability, and this model fits that requirement.

The Porter Cable logo was not put on with the greatest of care, but it hardly merits any bad criticism. For handyman work or specialty trim nailing, this compressor is ideal. It is well worth the 5 star rating.

Great design/performance, small QC problem
I bought this compressor to run Porter-Cable air nailers. The component layout is well done and compact. The regulator, cut-on/off control, and compressor are well protected. I like the single tank design better than the popular twin stack design (fewer welds to crack/leak). The handle extends out similar to that of a high-end travel luggage with wheels. The beefy tires allow it to pull over curbs, bumps, and up stairs with good ground clearance and roll-over stability. The metal plate on top is handy for storing the air hose. This will serve well for transporting the compressor to various remodeling jobs.

The compressor is quiet enough for indoor use; it doesn't drown out conversation in the same room. The first day of use, I noticed that the compressor would cycle on once every 1 1/2 hours, even with no use of the attached air nailer. Yet, there was no hissing sound from a leak. With the soapy water method, I found that the safety valve threads were leaking air, and the large threaded coupling into the main tank (under the check valve) was leaking a lot of air. After depressurizing the tank, I removed the factory compound from the threads and put on fresh joint compound (teflon tape is a no-no for air applications). After that, the compressor could hold steady for 1-2 days---no pressure drop at all. The factory joint compound looked as though it was put on too sparingly, but even then, it seems like a QC check would have found the two air leaks just by doing a pressure leak-down test.

The compressor is powerful, and rebuilds pressure for each cycle in only 10-15 seconds. At around 150 psi, the capacity is a lot --- it only cycled on 2 to 3 times a day when using a 18-gauge brad nailer. Since this compressor is oil-lubricated, it has a higher duty cycle than the oil-free version (will help when using framing nailers). The literature for this 4.4 CFM@90psi compressor rates it for only 1 framing nailer, even though similarly sized previous models with slightly less CFM@90 are rated for 2 framing nailers. I called Porter-Cable support to get an explanation. The guy provided the crucial data: A framing nailer such as FR350A only consumes 0.06 CF of air per nail. It's not the stated number of nailers that matters, it's the nail rate... 4.4/0.06 = 73 nails / minute or more for all attached nailer(s), plenty of capacity for my needs.

The tank pressure regulation is supposed to be 150psi (cut-off) and 120psi (cut-on). The indicated tank pressure was more like 145 / 115, but the manual indicates that the 150/120 spec is approximate. The deviation could be in the gauge rather than the controls. Anyway, what matters more is the accuracy and stability of the output pressure, which worked well.

The manal is well written, and its procedures (such as break-in) are very important to follow. Even though this is my first compressor, the manual is thorough enough in describing the dangers (inherent to all compressors) to make me feel comfortable using it.

The front console is easily removed (insert air hose between console and compressor), for remote regulation at tool use site.
Despite the minor air leaks that got past QC, I still give this product 5 stars for its design, performance, and oil-lube cast-iron cylinder durability .

It rolls!
The only unit of its type I've found that rolls over rough terrain in a balanced fashion. Easy to move around indoors and out. Powerful motor and compressor. Have used it to run two nail guns at the same time without excessive run time. Came fully assembled and ready to run...just had to fill with oil that was included. Runs on a 15 amp electrical circuit with no problems. Heavy duty, high quality piece of equipment that runs circles around similar units I've used. ... Read more

Features

• ASME coded 4-gallon OSHA recognized tank
• 4.5 cfm
• Dual soft start valves assist in cold weather start up
• Cast iron cylinder enhances pump life
• Oil lubricated pump allows for long life

Reviews (30)

DeWalt takes a classic to a new level
As a full time contractor working alone I am always on the lookout for tools that will make the job go faster and easier. Last yearI spent many months researching a replacement for my ailing Campbell-Hausfeld oilless compressor. Originally I figured the CH had a higher air output, needed no oil changes,would work on slopes and start in cold weather. ...After forking over the big bucks and putting it to work for DeWalt's 30 Day trial period I couldn't believe I'd gone so long without this compressor. The unit has loads of features and advantages.
1) First of all the Emglo name on the unit reassured me that I was getting a tool built by the industry leader with a great reputation for tough, dependable compressors. The first day on the job proved it with quick cycling times and ample air at all times. The unit just purrs and runs smoothly.

2) Portability. I do a lot of work in luxury high rises and I've often left the compressor at home rather than drag it down endless corridors. This unit carries like a briefcase (a 60 pound one) with an ergonomic handle and good balance. The unit's flat design makes it easy to bungee tie to a light weight luggage carrier ...It can carry the whole unit with hoses and nail guns. I can't overemphasize how much easier this makes my job. I've paid for the compressor already in labor savings by bringing it to every trim job.

3) Eye candy. Let's face it, this is a sexy looking unit. I've had othe craftsmen come over and ogle the compressor and ask questions about it, but mostly admiring it. Customers have commented on it, how quiet it is and how professional it looks.I am percieved as a serious craftsman based on my setup (along with my Senco SFN-40)which is good for referrals.

In short, this is a serious tool for the professional contractor with loads of power(delivered air), durability, great design and looks. DeWalt took a classic, the Emglo 790, and improved the power output layout and design. My only complaint is the air release lever, an otherwise solid unit mounted on the underside of the tank. The opening is too narrow for your hand and the sharp stream of air can actually cut your skin. In addition the compressor shoots out small chunks of ICE from the tank creating dangerous projectiles that will cut your hand or riccochet into your eye. Don't know why it does that but just beware and open the valve SLOWLY.
Finally, I have a compressor that won't roll around in the back of the truck knocking off gauges and connections as I drive through the city. Hats off to DeWalt and Emglo for a match that combines legendary durability with great design.

it's too much!
This is a great compressor. It's quiet with plenty of power and the portability is great.. plus all the dials are in the right place with easy visibility... however there's the exception of one valve and a reset switch.. There's only an inch or so for clearance for the valve and I could only get to it with a screwdriver. Secondly, the reset switch is located too close to the cylinder housing and cooling system which are about as hot as the sun when the machine is running.. plus the switch itself is a little tiny.. certainly too small for the average construction guy with gorilla hands. I've one additional bad thing to say and that is that DeWalt could use some better paint to go with such a great looking compressor! there's already rust on my cylinder housing and I only purchased the unit a week ago! But overall, I would recommend it highly... namely because it's so dependable, powerful, innovative and the recovery time is great.

A pleasure to own!

Hassle free! I've owned one of these for about a year now and couldn't be more pleased with the purchase.

The biggest complaint I have about other compressors is the portability of them. This unit, although like most, heavy, is designed well for moving from site to site. The sleek design means that parts or not going to get stuck on a pant leg when you pick it up or bash into your kneecap. I have found it most helpful to actually pick up the unit by the handle and then kinda hug the unit, holding it close to the chest. This helps to center the weight to my body and I can then lug the compressor up several flights of stairs without passing out.

The main reason I bought this unit over cheaper compressors was the recommendation to the brand names of DeWalt and Emglo. I now see why others recommend the Dewalt and Emglo brand.

It's not uncommon for someone to come on the job site and drool over this unit. Kinda funny how a guy can fall in love so fast with power tools!

If you need a great unit, this is the one to get! Enjoy!

roofer wayne
I used many compressors in 28 years of roofing. This is my 3rd emglow and 2nd dewalt. My first emglo lasted 12 years. My first dewalt is fine, I just needed another one because of expanding business. The only thing that was wrong with the first dewalt was the air regulator started leaking and had to be replaced. Other then that, it worked every day for two years so far,that with two or three roofing guns going which is like four framing guns and I did not notice it starving for air.This compressor is the best and durable for the Professional.

A nice small compressor
I bought this air compressor to do light construction work. I have used it for finish work all the way up to roofing and framing. I have to say that I was a little skeptical at first about using a small compressor for roofing or framing nailers but I was satisfied after the first time I used it. This compressor has impressed me more than most of my other tools. It runs smoothly and doesn't have to run that often. It recovers very quickly and is very user friendly. The controls are easy to find and use. I am able to carry it with one hand. I have ran the compressor off of 100 foot 12 gauge cord and haven't noticed any problems at all. I have a gas powered Emglo compressor and the quality is outstanding. The only downfall that I can find is that I think the power switch should be located on the front panel instead of on the side and thats just a personal preferance. Other than that it has been a really great compressor and I would recommend this compressor over any other in its class. It may cost a little more but you won't have to replace it like the other compressors. ... Read more

Features

• Roll bar handle for portability and added protection against harsh jobsite environments
• High rated 4.2 CFM @ 90 PSI, with only a 13 amp draw
• The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class
• Large cast iron pump with automotive style cylinder and piston deliver maximum performance
• Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance

Features

• Overload protection eliminates risk of motor damage
• 3.2 cfm delivered @ 100 psi enables quick recovery
• Oil lubricated pump improves durability
• 4-gallon twin stack tank design proven acceptance
• Lightweight design improves portability

Reviews (2)

The norm for DeWalt Tools
I had a Porter Cable 4 Gal., 2H.P. Pancake compressor and just wasn't satisfied with the performance, especially since I was accustomed to the Quality and professional performance from DeWalt. The PC just wouldn't keep up with my work in my shop. I took it back and purchased the D55151 DeWalt and, of course, am satisfied again. Truly, DeWalt lives up to the advertisement, "Guaranteed Tough"! One can not go wrong purchasing this Compressor for shop or light commercial work. You may pay a little more but the quality built into every DeWalt tool I have makes it worth every penny!

a home craftsman
I do various home repairs on my own home and on my rental properties. I needed a good quality air compressor for my nail guns and I purchased the Dewalt D55151. A framer friend of mine recommended the oil fil type as apposed to the oil-free version. I have had the compressor for about 2 months and so far it has performed better than I ever expected! It's great! The only drawback is that it does not come with a female hose connector, so I purchased and installed a manifold to accept 2 female connectors. ... Read more

Features

• 2.5 peak horsepower
• 4.4 cfm at 90 psi
• Direct drive motor
• Protective roll cage design
• Easy to grip drain cocks

Amazon.com

Hitachi’s 2-horsepower compressor is one of the hardest-working units on the market. Plug it into any standard household outlet and get 4.1 cfm of free air at 90 psi--enough to easily run two tools at once. Because of its compact size and trim weight, it’s the perfect compressor for the home do-it-yourselfer, but taking into account its power and portability, contractors will love it, too. Minimum maintenance keeps this baby humming for years--all it wants is lubrication. The 2-horsepower, direct-drive motor runs at 14.5 amps, so you won’t find yourself blowing fuses or popping breakers. Hitachi’s known for workhorse tools, and this one is a prime example.--Kris Jensen-Van Heste ... Read more

Features

• Oil-lubricated design for a long life of service
• 2-horsepower direct-drive motor runs at 14.5 amps--won't overheat circuits
• Delivers 4.1 cfm of free air at 90 psi
• Vertically stacked twin tanks with 4 gallon total capacity
• Shutoff valve at line and auto reset

Reviews (22)

Hitachi's Dependable Compressor
I chose the Hitachi three years ago because it has a fine compressor and motor, solid construction, and overall good design. It has been entirely reliable and three years later I still am using it both in my cabinet shop and on the job for residential remodeling. The only significant design flaw is the position of the gauges. They are subject to being knocked off. I found this out the hard way one day when I had to slam on the brakes in my van and a sliding tool box sheared one of them off. Despite this one flaw I would still by another Hitachi in a heart beat. The Hitachi is not only reliable, but, unlike many compressors, it truly works on 15 amps. This compressor has never blown a fuse on me, which is something of a miracle considering the wiring in many of the older homes I remodel.

Impressive compressor
I am impressed with many things about this hitachi compressor. It is very well built, except that the guages do seem very fragile, however, just about all of the compressors on the market have fragile guages. I think more of the problem with the gauges is that they are not protected as well, which makes them more prone to being broken while carrying around. I can fire around 20-25 15 guage finish nails before it has to recycle. It maintains pressure accurately between 100-125 psi. The only problem I have had is the pressure regulator. The regulator does not seem to decrease pressure very well when needed. Turning the pressure regulator knob counter-clockwise just doens'nt seem to engage in pressure reduction. And because of this, I sometimes have to conncect a blow gun while turning the pressure regulator counter-clocwise. This will result in 0psi at the regulator. Then it is no problem to increase pressure at the regulator. I think that this part may be defective and plan on contacting Hitachi. The oil lubed compressors are more durable over the oil free ones. The unit is also much quiter than I expected. Overall, this seems like a very good unit that has a history of proven reliability that is quite and easy to use.

Compressor great, regulator bad
This compressor is a great value. It has a quality oil lubricated motor and is competitively priced with "oil-less" compressors of similar size and capacity. It works great with my various small air tools (palm nailer, impact wrench, etc). My only complaint: After a few hours of light use, the regulator dial became very hard to turn, and eventually stopped working altogether. I dismantled it and found that the dial threads had stripped. I replaced the regulator with an inexpensive AmFlo model purchased at Lowes, and am much happier with the new one -- easier to adjust, more precise, and more accurate. If Hitachi included a better regulator, they would have a 5 star product.

EC12 Cold Start Problems
The Hitachi EC12 is a very solid contractor compressor. However, like most units that fall in this category, it often has difficulty starting. Starting related issues stem from cold weather, voltage drop across an extension cord or the use of multiple tools. While these problems occur across the board among compressor manufacturers, there is a product that helps eliminate the issue. Called the Smart Start by Conrader it replaces the standard inlet filter of the compressor. Essentially, it delays compression and allows the motor to reach full speed before encountering a load. More information is available at www.conrader.com.

Bob, a home improvement enthusiast
I have owned this compressor for 3 years now and it continues to run flawlessly. I agree that the gauges are mounted in an area where they can be easily damaged but if you take care when using and transporting the compressor, you won't have any problems. Change the oil regularly and this beauty will last a very long tme. ... Read more

Amazon.com

Here's a compressor ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives you four cubic feet per minute at 90 psi, enough to run multiple tools off the dual universal couplers. It draws low amps, too, great for job-site conditions. The panel is protected between the two tanks, a feature we really like, and features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. We like the ball-type tank drain design, too, as well as the roll bars that surround and protect the 2.7 horsepower motor. Another nice touch is the pegged wrap area for the power cord. The handle offers a well-balanced haul, and it's light enough for easy portability at 65 pounds. But don't let that fool you--this is one reliable workhorse.--Kris Jensen-Van Heste ... Read more

Features

• Oil lubricated pump improves durability
• Easy access panel with two universal couplers improves user access
• 4 CFM delivered at 90 psi, provides rapid recovery
• Dual soft start valves assists in cold weather start up
• Cast iron cylinder enhances pump life

Reviews (1)

DeWalts (Emglows) new compressor
Looks sharp, provides plenty of air with two outlets, runs quiet. Only negative would be this is fairly heavy (compared to pancakes). I would not recommed for a finish carptenter who may need to carry it from room to room or upstairs on a daily basis. ... Read more

Features

• Low profile design and pneumatic tire for mobility
• 5.5 HP Honda GX gas engine provides proven reliability and durability
• Twin cylinder, cast iron, oil lubricated pump for durability and reliability
• Ball drain valve allows for quick and thorough tank draining
• Automatic idle control for reduced fuel consumption

Features

• Folding handle for easy transport, accessory storage compartment, built-in cord and tool hangers and
• High rated 6.5 CFM @ 90 PSI, with only a 13.8 amp draw
• Jobsite ready to run two framing nailers at the same time.
• Large cast iron pump with automotive style cylinder and piston deliver maximum performance and an exclusive finned discharge tube dissipates heat to reduce the amount of moisture in the tank.
• Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance

Features

• 4-gallon twin stack tank design with proven acceptance on jobsites
• 2 HP motor, 4.5 cfm at 100 psi
• Dual soft start valves assist in cold weather start up
• Cast iron cylinder enhances pump life
• Oil lubricated pump allows for long life

Reviews (5)

Great Portable
Recovery time was very good when using a framing nailer. Using a blowgun for cleaning was ok. Acceptable noise level. Used on a 100' extention cord off a 15 amp circuit, with no problems. I'm very pleased with it. Looking forward to many years of use in my shop.

Just plain pleased
I use this with my Paslode; 16 Gauge and Framing nailers, I hang then trim doors, sometimes rebuild sills and headers. I also do various trim/frame carpentry on other projects.

If you are worried about changing the oil its only once a year!
If you are worried about operating on a slope, i have always found a flat spot to locate it in, even roofers leave theirs on the ground, just put on more hose. Who wants to carry this up a ladder anyway?!

I would never buy an air compressor without a user serviceable airfilter!
I would never buy one of those oil less types

Best compact hands down.
This bad boy will do the work of a much larger compressor. It will easily run several guns on a framing crew or even a roofing crew. The HP rating is a little misleading compared to other compressors. 2 HP isn't max , it's continuous. I have one of these (Emglo 2HP) that's been abused and used hard for several years now with no problems ,only good dependable air. I highly recommend it. If I could change one thing I would make it quieter.

Dewalt 55153 2 Gallon Compressor
This is a very compact, efficient compressor. However, it shipped with oil and the instructions were a little confusing regarding the total quantity of oil that should be in the machine. Also, Tool Crib did not honor their "low price guarantee"....

Dewalt 2HP Twin Compressor
Great Compressor - Good Balance, not to noisey, Well protected for construction Handling. A very strong runner for all day use. ... Read more

Features

• ASME coded 17-gallon OSHA recognized tank
• 8 HP Honda GX gas engine provides proven reliability and durability
• Four cylinder, cast iron, oil lubricated pump for durability and reliability
• Ball drain valve allows for quick and thorough tank draining
• Automatic idle control for reduced fuel consumption

Reviews (1)

Impressed
This is a BOSS compressor. The 8 hp Honda engine fills the 17 gallon tank in a few minutes. Then it goes to a low idle. Both compressor and engine come ready to go. Just add gas and pull the cord. The unit is packaged so all you have to do is remove three bolts from the shipping pallet. No assembly! I've ordered a sandblaster to use with it. I can't wait! Rust, look out! Heck, cats and dogs look out! Now, I can fix my new fence that the cop drove through with the air nailer ! ... Read more

Features

• Three year limited warranty
• 2.5 HP, 4.3-gallon oil-lube compressor
• Direct drive, no belts or adjustments are necessary
• Patent pending oil-lube system with ball bearing design
• Full roll cage with high flow regulator and dual quick-connects

Reviews (4)

A- compressor except for the regulator
I've been searching for a portable compressor for a couple of months now and near the end came up with three to chose from: the Emglo 55155, a Hitachi dual stack and this PC.

After looking at the reviews here, elsewhere and comments from a friend about his Emglo, I decided to go with the 2540S. My requirements were portability (60 lbs or so), oil lubed, at least 4.0 SCFM @ 90 PSI so I can use some automotive tools as well. Other compressors did meet these, but what draw me was the oil lube system that permits you to use it on uneven surfaces. This should be the norm! Other good things are excellent build (USA), non-ball type draincock (ice can ruin a brass ball), pressure release valve (to lower the pressure before you open draincock that can shoot projectiles), caged, not too bad noise level about 83 dbA (noisy street), lower running 1.3HP (2.5max) to not trip the circuit breakers, filtered intake (not output though) for longer motor life, shrouded motor for airflow from fan and good manual. Whoa! not bad at all.

Well, all is not well. The regulator unit is actually the weak link here, made of plastic and from Taiwan. Mine leaked just like the last reviewer had, so I opened it from the front and saw that the valves inside weren't centered to each other. The small metal cup also bit part of the plastic grommet retainer. Fixed all those, put a little non-petroleum lubed and it worked. Well I had to fix mine so I can work that day. The only thing I added at the universal coupler end is a water/air filter. It's at an angle but removable. It's been good so far. Hope this helps.

read the breakin directions
after you read the directions follow the break in procedure. add the oil before you fire it up. open the tank drain and run it for 20 mins with the tank drain open to break it in. then close the drain. after i used it to inflate some tires on various pieces of equipment i shot 25 or so narrow crown staples into some oak, no problems ( at 100lbs on the regulator. always check your equipment for the proper pressure). then to check the presure gauges i left the tanks fill. tank gauge read 155 lbs. regulator 145. i'm not sure why there is a difference, but the regulator control when it seem to be turned all the way to where it's tight, can still be rotated which i did until i reached 145lbs at the regulator. however, i stopped at 145lbs so that i didn't break it. hope this is helpful.

Great Little Compressor
This compressor packs a lot of power in a small package. It is relatively quiet and extremely powerful. The pressure controls are accurate which are very helpful in my situation. I look forward to many years of use.

Good compressor
Not that I know much about compressors, but this one seems like a good buy. I considered a few others, but for the price, I liked this one. The features that attracted me were the oil-lube, well protected regulator/switches/valves, and the nice "console" to hook up two hoses. (I think the only other unit offering all these features is that one from DeWalt) I think the noise level is about what I expected. From what I have heard/read, the oil-less designs are much louder than this. It's a bit on the heavy side, but so what.

My only concern that keeps me from giving it five stars is this: the owner's manual states that the compressor should cut-in and cut-out to keep the tank pressure cycling between 120 and 150 psi. According to the gauge, it only gets up to 135 psi. Is this a problem? Doesn't seem right to me.

UPDATE:
Based on the low tank pressure, I exchanged this unit to try another one. The second unit airs up to about 140 psi and stops. Seems to me that if PC is going to use the 150 psi as a selling feature, the unit should air up to 150 psi. I guess my next step is to make a trip to the service center to see if they can make some adjustments.

UPDATE #2:
The second unit went back to the store today, money refunded. This was due not only to the low tank pressure issue, but I also noticed that the unit had a slight leak. It would slowly leak down to the cut-in pressure and then cycle on. This is certainly not the product quality that got PC their good reputation. I think I'm done with PC's compressors for awhile. ... Read more

Features

• Dual voltage feature allows easy switching from 120- to 240-volt operation
• 8.4 cfm @ 100 psi for quick recovery
• Twin cylinder, cast iron, oil lubricated pump
• Low profile design for easy maneuverability
• Dual control feature allows start/stop or constant run operation

Reviews (2)

A total winner
This is without a doubt the best compressor I've ever used. The Dual Voltage and Dual controls are both features worth having and the quick recovery is exactly that. You won't have to sit around waiting.
It has been trouble free since I purchased.

Couldn't be better
This compressor is as strong as you need, it runs several guns at a time. I use to install wood flooring, wood framing, cabinet work and roofing work, for the short time that I have had it, it has performed flawlessly. The dual Voltage and the continuos run option is definately a plus, It draws hard on a 120 volt system but runs smooth on the 220 volt hookup. The recovery time is quick and you don't have to stand around and wait, like my old compressor. If production at an affordable price is what you are looking for, than look no further, you have found it....... ... Read more

Features

• Low profile design and pneumatic tire for mobility
• 1.5 HP electric motor delivers 6.5 cfm at 100 psi
• Twin cylinder, cast iron, oil lubricated pump for durability and reliability
• Ball drain valve allows for quick and thorough tank draining
• On/off constant run design for reduced breaker-tripping

Features

• Roll bar handle for portability and added protection against harsh jobsite environments
• High rated 3.3 CFM @ 90 PSI
• The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class
• Large cast iron pump with automotive style cylinder and piston deliver maximum performance
• Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance

Reviews (1)

Great little compressor
I have had this compressor for a couple of weeks now and really like it. It is a high quality unit clearly built to last. I chose this model over the very popular oil-free pancake compressors mainly for it's compact size and low noise level....and it did not dissappoint me. I would say this unit is half as loud as those typical oil-fee models by P*rter C*ble. I can easly run it indoors while remodeling a bedroom, and hardly hear in the room next door.

The unit is compact, but much heavier duty than similar Cr*ftman compressors I saw at Sears. It recycles quickly and fills the tank in less than 20 seconds. It came with a good owner's manual and a bottle of oil. I did have a problem where the plastic oil filler cap was cracked, but Makita quickly sent me a replacement part under warantee. I would recommend this unit to anyone looking for an occasional use compressor and does not want something large or loud. ... Read more

Features

• Three year limited warranty
• 2.5 horse power, 4-gallon oil-lube compressor
• Direct drive, no belts or adjustments are necessary
• Patent pending oil-lube system with ball bearing design
• Cast-iron cylinder and stainless steel valves for cooler operation

Reviews (3)

Design flaws
First one of these I received came out of the box damaged beyond repair. Switch was broke, regulator fitting broken off flush with the tank, tabs on the compressor that the shroud connects to were broken off from the compressor. Tool Crib did take very good care of me and sent me a new one. I went over the new one with the proverbial fine-toothed comb. All was intact. After about 2 hours of use (with me that translates to about 3 months) one of the tabs on the compressor that connects to the shroud has broken off. I have not moved the compressor since the day I took it from its box. I really think the thing is way too fragile for professional use. I am breaking the thing and I am just a hobbyist.

On the plus side, I can hold a conversation with my wife while the thing is running. It's a bit loud but not as loud as some of the "oil free" compressors are.

Very nice unit
I'm a carpenter/contractor and need reliable, good, long lasting equipment. Very happy with this air compressor. Hefty, but can carry around most anywhere. Not so loud to use inside and dosen't recycle so much and when it dose, it is quick. Handles framing to finish. Have plugged into 300 feet of electric cord and no problem with curcuit breakers. Very sturdy and am happy so far with product. Everyone is impressed with it.

Porter-Cable CPLDC2540P
This air compressor is excellent in all respects. I use mine to run air nailers and fill small tires. This compressor is powerful but yet light enough to carry. The oil lubrication feature should prove to be useful for long term durability. ... Read more

Features

• Roll bar handle for portability and added protection against harsh jobsite environments
• High rated 3.3 CFM @ 90 PSI
• The low 1720 rpm is half that of most competitive units, resulting in greater motor and pump life, and the substantially lower noise level makes it the quietest compressor in its class
• Large cast iron pump with automotive style cylinder and piston deliver maximum performance
• Oil lubricated for cooler running pump and an automotive style air filter for easy, low-cost maintenance

Reviews (1)

I'm Still Waiting
The shipping date for this product states that it ships in 1 to 2 weeks. I have currently been waiting for over 5 weeks for my order to be shipped. I have also been informed that the product has been delayed again and the new estimated shipping date might be another 1 to 2 weeks. This would make my total wait almost 7 weeks for shipping and probably another week for delivery, assuming that it ever gets shipped. I am very disappointed in the estimated shipping date that is posted. If I was given an accurate estimate, I would have ordered a different product. I now feel that I have a certain amount of time invested and feel obligated to wait it out. ... Read more

Features

• One-year warranty
• High-pressure technology provides the equivalent of a 32-gallon air supply
• Tank pressure is maintained between 110 and 135 PSI for more usable air
• High-flow regulator for more efficient operation of pneumatic tools
• Provides 8.6 SCFM at 40 PSI and 6.8 SCFM at 90 PSI

Reviews (7)

WARNING - Amazon's "free" shipping SUCKS!
Note the fine print in amazon's shipping policy:

" It will be delivered to your address but not UNLOADED, unpacked, or assembled. "

This means YOU will be responsible for getting the item OFF THE TRUCK when it is delivered to your home. That's over 4 feet off the ground. And yes, the truck will not have a lift gate--that costs more. So, they offer "free shipping", not "free delivery." Buyer beware!

Great Compressor for Average Woodworker
I held off on this review because a had to get a replacement. The first one was pretty banged up in shipment. I believe the reason for this is do to insufficient packing. The unit is not bolted to the pallet and only held on with 2 plastic bands. This wouldn't be a problem, but the unit is top heavy. The 2nd unit I received arrived in good shape, but I had had my fingers crossed. The styrofoam was pretty shattered. The setup was smooth except for trying to line up the holes to get the wire piece in that holds the handle in place--a minor design problem. Man, this puppy is quiet--especially compared to my little Emglo 1.5hp. It runs smooth and doesn't cycle on very often when driving nails. I would have given 5 stars except for the packing problem. It seems like it's just what I wanted since I need something that is an all-around machine. I need it for nailing, spraying, and other small jobs. I also needed something portable to work around the house replacing siding, etc.. Amazon was very nice and understanding in making the replacement. I do have to crate up the 1st one and send it back, but that's just the way the cookie crumbles.

Quiet, powerful with a manageable size!
I have a small shop (our two car garage) and I am very sensitive to noise. So, you can guess, that my two top priorities were a quiet unit that I could operate in the shop while I was working, yet powerful enough to drive my wide range of pneumatic tools. If you have the same requirements, you are reading about your dream compressor. This unit is smooth and powerful Once again PC has delivered a nice piece of engineering. I have placed it in my shop under a table that I do most of my assembly and work. It kicks on and burrs for a few seconds and goes to sleep for a long period while I am firing nails or something. I measured the noise level while it was running and it is well within the range. I just love this compressor!

Quiet with plenty of power
I have a small shop and was looking for a quiet compressor, portable, with a large enough capacity to handle a variety of tasks. I had an old sears 220v compressor that was very quiet that finally gave up the ghost. I borrowed a relatives compressor that was so loud that I couldn't stand it any longer. After reading other reviews I purchased the CPL6025 and it's everything I hoped for. Highly recommend it for someone with the same needs as me.

Great Compressor!!
I use this compressor in a wood shop and it provides enough air pressure for all my needs. It is also quiet, but fills the tank very fast. The output pressure valve is convenient and easy to use so you don't have to spend a lot of time trying to set the proper air pressure for the tool you are using. The 6025 is also great because of its portability. All in all, this is a great compressor that can handle a large variety of jobs... p.s. Be sure to read manual before operating the machine it offers very good advice that should be followed.. ... Read more

Features

• Dual voltage feature allows easy switching from 120- to 240-volt operation
• 6.5 cfm @ 100 psi for quick recovery
• Twin cylinder, cast iron, oil lubricated pump
• Low profile design for easy maneuverability
• Dual control feature allows start/stop or constant run operation

Reviews (1)

AWESOME
THE DEWALT 1.5 HORSE DUAL VOLTAG , DUAL CONTROL IS TE BEST OF THE BEST.I RUN A HARD WOOD FLOOR COMPANY , AND WE USE ALL AIR TOOLS . WE HAVE OUT RUN LESSER COMPRESSORS AND HAD TO STOP NAILING TO LET THE COMPRESSOR CATCH UP. NOT ANY MORE !! THANKS DEWALT FOR A AWESOME COMPRESSOR . ... Read more

Features

• Three Year Warranty
• High-pressure technology provides more usable air for longer run time
• 7 hp induction motor for efficient operation
• Oil-lubricated pump with aluminum body and cast iron cylinders for heat dissipation and durability
• 80-gallon tank supports heavy-duty, continuous use of multiple tools