Amazon.com

Remember how cool we all thought that first Dremel was? We're reliving the feeling with this one: lighter, faster, smarter, better, and stronger. The main improvement over the last generation is the battery source: lithium-ion. There are so many reasons to applaud. Lithium holds its charge up to six times longer in storage than nickel-cadmium batteries, so it's ready when you are. Remember the disappointment when you were ready and your battery was low? That won't happen with this one. It's got a battery fuel gauge that tells you how much life is left before a recharge, so you won't be caught without your Dremel, and if you choose to keep it on its charger, you won't cause memory and shorten the charge capacity. It's small, it's light, it's comfortable and maneuverable; it's everything the corded models are, but without the cord. We love it.--Kris Jensen-Van Heste ... Read more

Features

• Small and lightweight for easier handling and less fatigue
• 50% more power to handle the toughest jobs
• 40% more speed; the highest speed available in cordless rotary tools
• Holds a charge 6-times longer than NiCd batteries, so it's ready when you need it
• Lithium-Ion batteries can be recharged at any time without damaging charge capacity or run-time

Reviews (10)

Lithium-Ion is SOO worth it!
I've always wanted a dremel and thought that the cord would be fine. But now I'm glad I went with the cordless. I use it in the back yard, around the house, at work. Not only that, Lithium-Ion technology is outstanding. Blows doors off those old nickel rechargable batteries.

Lithium-Ion is the same technology being used in the most current cell phones. It doesn't have memory problems like the old rechargables so you can charge it at any time, YOU DON'T HAVE TO WEAR THE BATTER DOWN BEFORE YOU CHARGE! Also, the charging time is a fraction of what it used to be. If I run out, I put the battery on the charge for less then an hour and I have enough juice to finish the job. Typically, full recharging only takes 3 hours.

I highly recommend that you get this dremel (8000-01 10.8 Volt Lithium-Ion) if it is your first time, second dremel, or a dremel enthusiast.

Dremel Lithium Ion Rotary Tool-Model 800
Finally, a cordless rotary tool that holds it charge while being stored. Now I don't have to worry about charging my tool's batteries the night before I need it for a project. And the Lithium Ion batteries are environmentally safe--unlike Nickel Cadmium batteries.
This tool is surprisingly smooth, yet seems as powerful as my old standby corded Dremel Model 395. At 35,000 RPM it is the fastest cordless rotary tool I've seen on the market. I like the sleek, ergonomic design. Based upon my previous experience with Dremel tools, I expect this tool to be trouble free for a long time.

Nice but underdesigned
I bought one of these at a local brick & mortar store for a project I'm working on. I am impressed with the power of the device and it is a really neat tool, but unfortunatley I've already had to return two of them for a defective speed control. While using it, the first one all of a sudden just jumped up to full speed and stayed there regardless of where the speed control was set. In other words, it was no longer variable. The second one did the same thing. Since I saw replacement brushes available for their tools (and therefore they must consider it somewhat user serviceable) I decided to open it up and see what it looked like inside. One of the transistors on the circuit board had gotten warm enough to melt the solder and shorted out two of the pins on the transistor. I'm on my third one now (just returned them at the store) and I first bought one about 2-1/2 weeks ago. Great tool but Dremel needs to work on their quality control.

I love this Dremel !!!
Mine is utilized for robotics projects--it finds a lot of uses with metal. I also bought the press accessory with it. This little accessory helps me make straight cuts and drill holes.

I'm telling you, I use this thing constantly and it works like a champ! It is powerful enough for me to cut all my brass and aluminum with the precision of that of a doctor. For as handy as this tool is--I'd pay twice as much to get one if need be. I've had mine for 5 months too.

One HUGE word of advice. WEAR SAFETY GOGGLES! I know this may sound lame, but it saved my @ss!!! When cutting some tubing, my disk exploded at full RPM's and the shrapnel hit me in the goggles. (Of course I had my fat head over top of it while I was cutting) Just be careful. The tool is A+, but the little thing could be dangerous if you slack on the safety.

This is a first look
I've been using Dremels for a long time and always wanted a decent cordless. With the advent of decent cordless power tools (the first one that I had that was actually useful for something was an 18 volt DeWalt drill that went right through stuff my corded drills wouldn't touch, but that's another story) I've been waiting for Dremel to come out with a good cordless.

I've been hesitant about the earlier cordless Dremels but this one looks like "it".

So far it's done everything I've asked it to do but I haven't asked it to do much--I got it specifically to deal with a piece of acrylic that my cordless Rotozip melted instead of cutting--I figured the adjustable speed on the Dremel would take care of that and was right.

Just an aside about stalling--if you're stalling a Dremel then it's time to take a good hard look at a Rotozip, which, if you've never played with one, is kind of a Dremel on steroids--Dremel has an equivalent, the "Advantage", but only the one model and not cordless.

The lack of a provision to charge the battery with the tool attached is just carrying through the current practice with cordless tools--it's assumed that one will have two batteries, one on the tool and one on charge if this is an issue. There's space in the case for a second battery.

A "gotcha" to be aware of with the lithium ion batteries, always store them charged--if they self-discharge below a certain point a protective circuit kicks in and they disable themselves--this is a safety issue--trying to recharge a lithium ion battery that is discharged below a certain point can result in an explosion (I'm not talking about a little spill--exploding lithium batteries in emergency-locator transmitters have brought down light aircraft).

The bundled accessories are, near as I can figure it:

Aluminum oxide stone #932 and #8193
Silicon carbide stone #84922
Aluminum oxide abrasive wheel #541
2 rubber polishing wheels #425
3 Large felt polishing wheels #429
5 Small felt polishing wheels #414
1 cutter, looks like a #181
1 drill bit, #150
1 Mandrel #401 (for felt pads etc)
1 Mandrel #402 (for sanding disks, cutoff wheels etc)
Sanding cylinder mandrels 1/4" and 1/2"
4 80 grit 1/2" sanding cylinders
3 120 grit 1/2" sanding cylinders
4 80 grit 1/4" sanding cylinders
3 120 grit 1/4" sanding cylinders
11 sanding disks
17 cutoff wheels, 3 are thicker than the others, the others are in two containers of 10 and 4 but can't tell any difference between them.
1 wrench with screwdriver tip that fits screws on mandrels
1 case with a good deal of unused storage even after all the accessories are stored. ... Read more

Amazon.com

We started counting all the uses for this little dynamo, but we stopped at 967. We like it for delicate tasks and finer work because it isn’t as powerful as its big brothers, so it’s easier to control. It’s light, extremely maneuverable, the switch is exactly where you want it and heck, it’s just plain fun to use. It’s perfect for jewelry, electronics, tiny woodworking crafts like dollhouse furniture and other intricate hobbies. It uses Dremel’s wide array of bits, so there’s virtually no limit to what you can do with this. Sure, there are store brands on the market for less, but Dremel is king when it comes to rotary tools, and we think they outdid themselves with this one.--Kris Jensen-Van Heste ... Read more

Features

• Shaft-lock button and unique collet nut make changing bits easy--no wrench required
• 1/8" collet
• Removable battery pack & 3-hour charger
• 2-speed (5,000 & 10,000 RPM)
• 2-year warranty

Reviews (8)

Great for My Use
My dog's breeder recommended this model to use for keeping the dog's nails trimmed. Absolutely perfect for filing down her nails. I always put on a pair of gardening gloves (you know how puppies and dogs wiggle) and this cordless wonder works GREAT. Good price, great work. A very good buy.

Podiatrist Recommended!!
Believe it or not, my podiatrist recommended this gadget for trimming rough skin on my feet. It is not very powerful, which is perfect for this application. If it were too powerful... well, let's not think about that. But it's perfect for trimming excess dead skin, bunions, etc., on the feet. It may have other uses as well, but this is what I do with it.

Awesome tool
I needed a little tool to carry in my tackle box to sharpen fishing hooks. I use a Dremel grinding stone to touch up the barbs and keep them sharp. Don't let this big little tool get away!

My kids' toys have more power
Plenty of Power??? I don't think so. Mine has trouble cutting open a plastic 2 liter soda bottle.

Skip this one and go for the 7.2V model. It has the power you are looking for. Grinding out a fastener that snapped in a steel airplane model was no problem for this 7.2V model. Although, it still takes a good carbide bit for this tricky operation.

A REAL WORKER
I bought one of these tools, when it first hit the street.Man was I surprised with the power. After about 2 years of serious duty I finally wore it out.The only down side was not being able to precisely control the speed.You cant go wrong here folks dremel has built a reputation on simplicity and reliability.This minimite is no exception and is definitely tool box worthy. Now get out there and grind,cut,polish something. ... Read more

Amazon.com Review

Built for the do-it-yourselfer, Dremel's cordless MultiPro kit delivers the versatility you expect from a Dremel--with the added advantage of being cordless. Lightweight at only 9 ounces, this compact unit maneuvers comfortably in tight spaces. What will you use it for? Remove old grout in your bathtub, polish your flatware, remove a broken tile, etch glass, hang miniblinds, cut out a pet door, install a new car stereo, sand off a spot of hard-to-reach rust, clean your boat's outboard engine parts, refinish ornate woodwork, install a mortise lock, and much, much more. The kit comes with 50 bits, including a high-speed cutter, a bristle brush, a cutoff wheel, sanding discs, a felt polishing wheel, a grinding wheel, and more--all the tools you need to tackle projects around the home. The tool's ball-bearing shaft affords minimal vibration. The shaft-lock button and unique knurled collet nut make changing bits easy, too, with no wrench required. A three-hour battery charger and a carrying case are included. --Jon Groebner ... Read more

Features

• 2-year warranty
• Lightweight (9 ounces) and compact, this unit maneuvers comfortably in tight spaces
• Kit includes 50 accessories, battery, 3-hour charger, and carrying case.
• Ball-bearing shaft affords smooth operation and minimal vibration
• Shaft-lock button and unique collet nut make changing bits easy--no wrench required

Reviews (13)

Extremely useful gadget
I have a line powered Dremel but I most often grab for this rechargeable unit because its easier to handle without the cord. It is great for tight spots in the car. I recently upgraded the intercooler piping in my car and needed to enlarge a 2" hole to 3" diameter. I just used the cordless Dremel to make numerous radial cuts and bent the "tabs" back. I would have gone nuts trying to cut that out with a hack saw or file! I always use it at the full 15 krpm speed and don't miss a variable control at all.

My friend lost his special "antitheft" key wrench for his license plate mounting bolts. I just used a cut-off wheel to make two cross cuts in the (round) bolt heads, and unscrewed it with a Phillips head screwdriver. Without a Dremel, it would have been tough.

The battery life is short, but I always have an extra charged battery ready. If I'm working with it alot, I just rotate the batteries through the separate wall mounted recharger.

It can also be used as a printed circuit drill or for other small precise drilling. Much easier to handle than a typical hand drill for light work.

It does kick up some metal bits so use eye protection!

Useful for small jobs
Overall a good useful tool for light duty use only. Battery life is very short and the cutting wheels are delicate. I've pretty much destroyed all my wheels and stones putting the dremel to tasks which it obviously can't handle. The case is rugged and holds lots of bits and attachments.

I plan to purchase a corded dremel for those more ambitious jobs.

Cordless version has quirks - but does great job
Good: high speed+abrasive wheel cuts through ANYTHING, light durable feel when using, vast array of bits makes this a jack of all trades from cutting to polishing.

Bad: battery pack does not last very long, On/Off Switch is not definite (safety concern?), needed to buy 2nd battery pack while working a a bathroom project

This is NOT a drill. I see other reveiwers complain about this. If you want torque buy a light-dimming 12Amp Milwaukee Power Drill. The Dremel is an abrasive tool. If used intelligently it will do ALMOST anything you ask it to.

An incredibly useful tool that even I can use without mishap
I'm not what you would call a handy sort of fellow; a few years ago, my greatest handyman-type success was the successful changing of a light bulb. Five years ago, I had never even heard of Dremel; now, I wonder how and why anyone goes through life without a handy-dandy Dremel tool. A few years ago, I got it in my head that I wanted to build my own working versions of Tom Servo, Crow T. Robot, and Gypsy of Mystery Science Theater 3000 fame. Such a project involves some tool-oriented activity, so for the first time in my life I found myself looking at tools. Since I know nothing about tools, I went about my business trying to look like I knew what I was looking for. I think every man responds to the siren call of the hardware department at some point in his life, but not until I found myself looking at a selection of Dremel products did I feel a strange lump of excitement in the pit of my stomach; tool anxiety had suddenly turned into tool excitement, and I gleefully returned home with this Dremel Multipro Cordless kit - feeling quite manly, I might add.

Exactly what does this thing do, you ask? Dude, what doesn't it do? It slices, it dices - no, wait, that's not right. This Dremel tool carves, it grinds, it polishes, it sands, it cuts, it brushes, it drills, it does darn near everything. It comes with 50 accessories in the form of abrasive wheels, drill bits, wire brushes, polishers, engraving cutters, router bits, and cutting wheels. I, being born with a passive tool-user gene, can't really tell what each accessory piece does just by looking at it, but I'm sure most halfway intelligent people can. I have fun just trying to figure it all out. What I needed at the time I bought my Dremel kit was a little sander tool, and even I could recognize the accessories made for that purpose. I soon had my proto-Tom Servo head free of jagged edges and was ready to delve further into my little project; this was just the first of many little Dremel success stories in my suddenly tool-enabled household.

The tool itself is a portable two-speed unit that comes with its own battery and charger. Whenever you get through using it, just plug it back up to let it recharge, and it's ready to go the next time you need it. It is light-weight and allows for different grips, helping to ensure you can pretty much reach whatever little space you need to get to with it. This model has two speeds - 7500 and 15000 rpm. That's pretty darn fast, and that high speed combined with the unit's low torque makes life pretty simple for you - the tool does all the work for you, making this the perfect tool for weaklings such as myself. Now, if you're into some heavy-duty work, the Dremel tool may not meet all of your needs, but for many odd jobs around the house and all manner of hobby activities, a portable Dremel tool is the way to go.

I must say that the documentation that comes with the kit is quite impressive and does actually describe each accessory and its proper uses. Of course, my being a man, I don't think it's legal for me to read a manual, so I just get by on instinct and luck. The kit also comes with a colorful little book telling you all sorts of jobs you can do with your new Dremel tool - if you have a significant other, you might want to keep this kind of information away from her/him. Even if you do get stuck doing odd jobs your better half would never have conceived of without the insight of the Dremel documentation, at least you can be comforted by the fact that you will have a lot of fun playing with your new essential Dremel tool.

Almost Flawless
This tool is small, quiet, and easy to hold, even for a woman. It doesnt kick back when it turns on or while you're working with it. When you turn it off, it stops its own rotation immediately instead of spinning to a stop. I got it for my boyfriend for Christmas.

Comes in a nice, compact black case that snaps shut, and even holds the manuals. One small complaint is that the attachments are left to float freely around the box. This can be corrected by using ziplock bags to hold them.

Easy to charge because the bottom of the tool pops off and fits into the charger, so the whole tool doesnt have to hang from your wall.

A couple of notes that would have helped me, so may help you- I thought this tool could be used as an electric screwdriver, but it can not. It spins too fast.

Also, be aware when looking at the Dremel tools that some are corded. I almost ordered a corded one, but decided on this one because of the convenience of use. Corded ones give you more power per price. I think this is the most powerful cordless model offered by Dremel. ... Read more

Features

• Clear TurnLock base for optimal visibility
• Fits most rotary tools including Dremel, Black and Decker, RTX and Tool Shop
• Includes circle and edge guide for miniature edging and dados.
• Integrated vacuum system
• Easy-grip handles for comfort while working

Amazon.com Review

When it comes to versatility, few tools can match the Black & Decker MT1203B cordless multitool featuring interchangeable drill/driver, jig saw, and sander/polisher heads. Each attachment locks securely into the ergonomic base quickly and with little effort. As a drill/driver, the multitool features a 24-position, keyless chuck with variable speeds ranging from 0 to 700 rpm. An electric brake stops the chuck in less than one second, for even better control. The jig saw features a tool-less quick-clamp blade changing system, a 45 degree bevel, and a blade support roller for more accurate cuts and a longer blade life. It cuts through wood, thin-gauge sheet metal, plastic, or composite tile, with speeds ranging from 0 to 3,000 spm. As a sander/polisher, the multitool works much like Black & Decker's Mouse sander. Its hook-and-loop fastening system makes accessory changes quick and easy, while the included detailing pad provides a fine finish in even the tightest spaces. --Carl Thress ... Read more

Features

• Soft cloth carrying bag for easy storage
• One tool, three attachments, for drilling/driving, sanding/polishing, and cutting
• Quick-clamp blade change system for fast blade changes
• Detail sanding pad for reaching into tight corners
• Variable-speed drill/driver operates at 0-700 rpm

Reviews (1)

Seems like an awsome deal!
While I never used the product mentioned, I own a Black and Decker 18v drill and am totally satisfied. Considering all the tools, this product seems like a real score for the price. I would love a gift like this...

At 700 RPM and 12v, the drill might only be useful for light to medium duty work (cutting doorknob holes or drilling into metal seems like it would be pushing it) but for easy work like making holes in the wall to hang stuff or assembling Ikea furniture it should be adequate. ... Read more

Features

• More power & longer run times
• Premium NiCad composition for long lasting performance
• Quick change
• Rechargeable

Amazon.com

We don't believe there's a golfer on the planet who wouldn't like a better score, and this little Dremel kit is a dream come true. Any compacted soil on your clubs can affect your trajectory; but a quick buzz with this neat little gizmo and your clubs are ready for the Masters. You can also clean off your golf spikes with the special bristle-brush attachments for a smooth pivot. The pros' caddies clean their clubs before every shot, and we think it'll be your habit, too, once you try out this handy kit. The carrying case clips neatly right to your golf bag and because it runs on good old AA batteries, there's never any recharging. Two smooth speeds deliver the power you want, and changing brushes is a snap. It's the perfect gift for the golfer who has everything except a perfect score.--Kris Jensen-Van Heste ... Read more

Features

• 6.0 Volts of power for light-duty, precision cleaning
• Two-Speed (6,000 and 12,000 rpm) for versatility
• Lightweight and portable for cleaning clubs anywhere, anytime
• Includes two accessory brushes for safe use on woods, metals and graphite clubs
• Clip-on carrying bag clips to golf bag for easy portability

Reviews (1)

More than Golf
I frankly have zero interest in golf, but I did need a portable, light-duty rotary tool for cleaning battery contacts and light buffing, and this one does very well. It runs on disposable AA alkaline batteries rather than a rechargeable battery pack, and I consider that a plus, since it results in lower immediate cost and avoids the irritating self-discharge characteristics and lengthy recharge times of NiCd and NiMH batteries. Torque is limited, but ample for things other than metal grinding or wood routing. It's a useful tool. ... Read more

Features

• One-touch sliding chuck for easy bit installation and removal.
• Reduced vibration for less operator fatigue.
• Electronic variable speed control dial (230-450 RPM) for easier hole starts.
• LED light indicates when to replace carbon brushes, and if there's a problem with the switch or power source.
• Ball clutch torque limiter ensures stable torque control.

Features

• 2-year warranty
• More power & longer run times
• Variable speeds from 5000 -25,000 to handle a great range of applications
• Comfort grip housing for greater control & handling
• Kit includes 10 accessories, 3-hour charger, 9.6v battery and carrying case.

Reviews (9)

Great tool!
This tool was the workhorse of a room re-model in our house. Worked very well. If you need really high-speeds, you'll want to stick with a corded model. But, the portability of this tool makes it my favorite!

Faster speeds a nice improvement
Dremel's other cordless rotary tools only go up to 15,000 rpm. I like the 9.6 volt cordless because it goes up to 25,000 rpm and makes smoother cuts.

I use it outdoors all of the time
I still have my corded Dremel but I found I was only using my Dremel when I was outdoors. So I got the 9.6 volt cordless. I have sharpened my lawn mower blade with it, cut off rusted bolts on a basketball hoop and cut threaded rod on some fencing, all on the first charge of the battery. I'm just keeping it in my garage tool box until I have to recharge it. [....]

Now I can Dremel outside!
I bought the tool. I like the tool. Enough said.

Most used tool in my tool box
I'm not a big time do-it-yourself person or anything, but I have plenty of small jobs around the house that I use this tool for. First, the Amazon price was great and I got the tool in three days. I used the 7800 Dremel to drill all of the mounting holes for drapery rods in my house. I could even cut off part of the metal mounting bracket that stuck out too far with the Dremel and one of the Dremel cut off wheels. I like how it feels in my hand and I have even used it with the attachment to remove grout. My first Dremel and I like it! ... Read more

Features

• Ideal for Landscapers, Pool Installers, Electricians, Plumbers, Masons and Remodelers.
• Powerful 13.0 amp motor delivers 1,450 BPM making it the leader in it's class.
• Lightweight with enlarged rubberized grip that is ergonomically designed to provide comfort, control and reduced operator fatigue.
• Lowest vibration level in it's class at 16 (meters/second)
• Lock-on button for continuous operation without having to hold the trigger.

Features

• One-touch sliding chuck for easy bit installation and removal.
• Reduced vibration for less operator fatigue.
• Electronic variable speed control dial (230-450 RPM) for easier hole starts.
• LED light indicates when to replace carbon brushes, and if there's a problem with the switch or power source.
• Ball clutch torque limiter ensures stable torque control.

Features

• Factory greased packed for approximately 200 hours of maintenance free operation.
• Features an innovative pneumatic compression system that automatically adjusts air in the cylinder to minimize power loss.
• Special idling mechanism prevents hammering while idling.
• Innovative shock absorbing handle minimizes vibration transmission.
• Accepts commonly used 1-1/8" Hex shank air tool bits.

Features

• 2 Year warrenty
• Dale Earnhardt Sr.
• 7.2V
• 6 accessories
• 3 Hour Charger

Features

• 2 Year warrenty
• Dale Earnhardt Jr.
• 7.2V
• 6 accessories
• 3 Hour Charger

Features

• 2 Year warrenty
• Kevin Harvick
• 7.2V
• 6 accessories
• 3 Hour Charger

Amazon.com

This is one of the handiest power tools we’ve seen. With a variety of bits and cutters, there’s very little it won’t do. We like this model’s removable handle for getting into tight spots, and its dust blower really keeps the cut line clear. The extra-large base offers superior stability, and the angled handle gives you great control and comfort. A wide range of accessories are available, but it also takes ¼-inch router bits, turning this versatile tool into a router, too. Crafters, woodworkers, do-it-yourselfers and homeowners ought to tuck one of these in their toolboxes. Women especially will appreciate its small grip.--Kris Jensen-Van Heste ... Read more

Features

• Powerful 5.0 amp, 35,000 rpm motor
• Easily makes clean cuts in drywall, wood, and ceramic tile
• Adjustable depth guide with larger base for more control and accuracy
• Angled handle with support base for superior control and stability
• Oversized spindle lock for quick and easy bit changes

Features

• Two year home use warranty
• Two speed ranges, 13,000 and 18,000 RPM
• Angled design
• 63 accessories
• Accepts all rotary tool accessories

Reviews (8)

Portable but Whimpy
This is a handy tool because you can grab it and go anywhere with it to use on weird/odd projects of very small scale. If you try to use it on anything more substantial, you'll find it is very underpowered and you'll go through a lot of batteries. A rotary tool is supposed to be a high-speed device. This VersaPak unit turns very slowly and bogs down easily. This causes you to use more force than you would use normally which drammatically shortens the bit life, especially the cut-off wheels. On one small project, I gave up and borrowed a friend's powered Dremel drill. Wow! What a difference. I now have two rotary tools: powered and this VersaPak.

This is THE tool for trimming dog nails!!!!
This is THE tool for trimming dog nails. Use the coarse
sandpaper wheel on low... Given what groomers charge you for trimming nails
this savings pays for the tool in under a year alone.
You can grind TO the quick instead of slicing INTO it with
a guillotine cutter. I use it and from my experience with it
my vets use it on all their client dogs now too. Cordless
is handy and the batteries hold 250-270 charges.

Great for all those little Jobs
I just bought one and I was quite impressed. Of couse its not going to be able to perform a huge job(no rotary tool will), but it is great for almost everything else. It cuts and grinds pretty fast, but you have to be patient when its charging. So far though its been able to do every thing I've put it up against

Specialized, not limited
The trick to the Wizard is realizing that it is for jobs where no other tool is right, not as a replacement tool. If you try to use it to cut through a lot of material because you don't have an electric saw, you'll be disappointed in both the cutting ability and the charge capacity. (I know I was) However, when I needed to round the edge of a metal plate it was perfect.

I've spent a lot of time figuring out other jobs for it and I've been happy with the results now that I know what to expect. It really seems to excel at working with metal when a smooth finish is needed or the area you need to work in is very tight.

If you don't already have a bunch of VersaPak tools, get the corded version so you don't get stuck half way through a job.

Great tool for quick trip jobs.

This is a great tool for quick little chores. There's a million things you can do with it. Other reviews are accurate when they say it has limited power. It's true. (I sort of wish they had made this a two-battery tool). I have a similar tool with a cord and I use that one for longer or heavier jobs. But if you need something to do a quick job or have to go out on the roof or someplace else where power is not readily accessible this is a great tool. Plus it comes with all the little doo-dads most other brands nickel-and-dime you to buy separately. The carrying case is very handy and has room for all the included accessories and more. (That's an amazing feat, by the way. Most tools that come in a case don't allow any room for accessory expansion. This one has plenty of space. Even enough for several extra batteries as well).

One thing you can do to help with the power problem is to buy a few of the "Gold" battery packs which have NIMH batteries instead of NICD. These really do last longer. I have replaced all my silver batteries (the ones that come with the tools) with the gold ones. They are available at places like Target and hardware stores and cost a little more but are worth every penny.

The Versa-Pack system is brilliantly convenient. I currently have four tools and two different flashlights that use the versa-pack batteries and I find it very convenient to use the same chargers for all the batteries. If the screwdriver battery dies, I steal one from the flashlight while I charge the other. It works great. So, once you buy several versa pack tools (most of which come with chargers) then you have several chargers to destribute. I keep one in the garage, one on the workbench, one in the truck and one in my job box. Anywhere I go I've got a charger ready to go. There's also a 12v car charger available and it works great. Another tool idea- the versa-pack snake light goes with me to every job, if you get a versa pack tool you will definitely also appreciate the snake light.

Good luck and happy shopping. ... Read more

Amazon.com

Even the least artistic among us can have the coolest pumpkins in the neighborhood this year with Dremel's carving kit. It's a neat, buzzy little unit that carves off layers of pumpkin flesh to let the light glow through. It isn't meant to cut all the way through the pumpkin, and the effect is perfectly spooky. Powered by two AA batteries, it's got two speeds for superior pumpkin-stock removal, at 6,000 and 12,000 rpm, so it's not a child's toy. Here's how the process goes: Cut a lid in the pumpkin the old-fashioned way and scoop out all the innards, leaving smooth, 1/2-inch thick walls. Stick the template to your pumpkin with spray-on craft adhesive and start tracing the design with the Dremel on the low setting. For larger areas, switch to high. The only trick is trying to remove the same amount of material on all the cuts so the light glows uniformly from inside the pumpkin. It takes just a little getting used to, and after a practice pumpkin, those snaggle-toothed Jack-o'-lanterns with the crooked mouths will be a thing of the past on your porch. --Kris Jensen-Van Heste ... Read more

Features

• As easy as tracing a drawing
• Additional pumkin carving tips available at www.dremel.com
• 6.0V cordless MiniMite (requires 4AA batteries, not included)
• 6 Free Templates included to start designing stunning carvings.
• Carve intricate patterns in minutes

Features

• Removable base and depth guide
• 23,700 RPM
• 12v NI-CAD battery
• Easy to remove handle
• Round base for easy visibility

Reviews (9)

Not sure why it is so hard to find.
It took me a long time to find this item. But I have been very satisfied with it. I can't imagine using a tool like this with a power cord. The cordless option is outstanding. Especially for drywall wall and ceiling work. I've also used it for some very tricky trim work, trick or odd flooring cuts, and even the occassional finished carpentry. Having the right bits is everyting. So get yourself some extra bits of various kinds to have in the toolbox for when you need them. My only criticism is that the height guide is easily bent, and just not made to the same quality as the tool. It can eat batteries, so keep them charged or buy extras.

Disappointed
I have found that the Roto Zip battery opperated, in not worth the money. I have use mine a few times on drywall and it gets very sluggish very quickly. The batteries last a very short time. I was using it on a small job and the thing just stopped. It made horrible grinding sounds and chugged then stopped. I have email the company but haven't heard from them yet. I don't think it was worth the [money] I paid for it. Buy another tool!!!!!

Customer Care
I have this tool which I use everyday (1 yr.)in the line of work I perform as a electrician. I work building new homes doing the final finishes (lighting and switches etc..). I used the tool everyday cutting out vinyl siding and some sheet rock work. The tool has gotten dirty and is need of some maintenance so I will be sending my tool back to ROTOZIP for this. If they take care of this then I will give it a "5". I will write back!! Remember this tool is only battery operated 12v DC not 120v AC!!!

Warren

Dissatisfied with quality and price of bits.
Think of buying a Rotozip? Don't waste your money! I can't tell you how much I like mine, because I can't keep the bits from breaking long enough to find out how much I like it. I went through all the bits that came with it and then went out to buy another bit to finish the job I had started, I paid for one bit at Sears, it lasted 2 minutes and it broke. I can't afford to use the Rotozip at that expense. Yes, I went counter clockwise and used the right bit for the right project. Believe me, no one wanted this product to work more than me, at its cost + shipping and handling.

Great item, but pricey here...
Check it out at WildwoodDesigns.com instead. The SCS01 is listed there for only $99.99. Great tool and shouldn't be without it.

http://www.wildwooddesigns.com/store/prodinfo.asp?number=T4518 ... Read more