Features

• Accommodates all applications
• Contains 125 pieces
• Clean, polish, sand

Features

• wrench
• Made in USA
• 5-year warranty
• 10 assorted accessories
• 1/8" collet

Reviews (1)

Dremel Model 275
I have just bought a dremel 275. I do Genealogy and right now I am making book to give to my son. This book has a wooden cover made entirly of wood. It will be an item that will be able to pass down from generation to generation. I have designed a Family Tree on the cover using my Dremel 275.
Thank You Dremel
Ron ... Read more

Features

• Includes-3 Zipbits, Zipbit case, wrench, hard tool case
• Quick release detachable handle
• Soft grip body
• Plastic adjustable foot
• 3 jaw chuck

Features

• Quick flip latches - attaches to tool quickly, without tools
• Runs up to 35,000 RPM making it the fastest heavy-duty flex shaft available
• Run by a powerful 4.5 amp motor of the Advantage Rotary Saw
• Comfort grip hand-piece provides better comfort and control
• Shaft lock button on hand-piece for fast and easy bit changes

Features

• For use with rotary tool models 275, 285, 395, 398 and 780
• Includes cutting guide, 2-#560 drywall cutting bits and 1-#561 multipurpose cutting bit
• Useful for making cuts in a variety of materials including drywall, wood, plastic, fiberglass, ceiling tiles, laminates and vinyl siding
• Cutting guide allows for a sturdy controlled cut with maximum visibility, and has easy depth adjustment
• Rotary tool not included

Reviews (4)

great practicality
I recently began using this attachment with my Dremel to create prescise lines at uniform depths. Using this attachment, I was able to achieve the results I was looking for. The variable depth is very helpful, but a little inaccurate. Still, I would recommend this product to anyone who is looking for a simple, but very helpful attachment for their Dremel.

Very useful
You can control the tool very easy with this attachment and better of all is compatible with the RTX of Black & Decker.

There to guide me...
Although this device is meant more for drywall cutting, I find it to be a useful tool when I'm cutting out narrow, shallow depressions in styrofoam for miniature landscape crafting. When I want to cut down to- and maintain- a specific depth, the guide lends me a really big assist.

Sadly, it's one of those accessories that require the use of collets, rather than a chuck, on the rotary tool. Not a really good thing when I'm constantly changing bits, and want to do it quickly. Oh well...

'Late!

One of the Best Attachments out there
IF you were to see how cleanly this kit cuts through Drywall you would know how great this tool is. The cut is nice clean and straight. No wraggly cuts like with a saber saw or keyhole saw. We used it to cut the hole for the box while Mounting Ceiling fans in the Master Bedroom and Living Room of our house and it was Indispensable. ... Read more

Features

• For use with rotary tool models 275, 285, 395, 398 and 781
• Now grout removal is easy.
• Easily screws on to the front of your DREMEL rotary tool
• Removes both wall and floor grout
• Includes #569 - 1/16" Carbide Grout Removal Bit

Reviews (9)

Works great, and fast too!
The grout removal attachment delivered as promised. It took the grout out so fast I was actually surprised. I have tips for success: 1. Always pull the tool, if you push it backwards the tip may break. 2. Use a shop vac to clean up the dust periodically as you go. Suck or blow out the tool with air from the vac to get the dust out. 3. Stand back and admire a job well done.

Nice idea ......................but.
After starting the degrouting job on by tub/shower i purchased a new dremel motor and this tool. The grout was 1/16" give or take and the grout was 20 years old. the bit cuts great and i did end up breaking 3 bits (@ $11.00 each). i was only 1/3 of the way done. The motor itself began having bearing problems, 3 hours into the job, due to grout dust ingestion. Home Depot gladly swapped tools. The worst part of this tool was dust blown all over the house. Finally took a hammer to the job and went to the studs and in the process found some serious potential problems. After 50.00 of hardibacker, 8.00 of tarpaper, 20.00 mastic, 110.00 in tiles, 12.00 grout and 15.00 misc i had a better job done with some potential problems fixed. It took 1 week of evenings to finish.
This is a good tool for a tile or two but to regrout a full surround (that is fairly old and you plan on living in your house not selling)..... I think you would be money ahead to at least consider a different route

Great attachment
I bought this attachment to finish cleaning the grout out of my tub/shower. I had done some of it by hand, but with my bad wrist, it was too much. I actually didn't use the bit that came with the kit, I bought 6 bits from leakyshower.com, for the price of one dremel bit, and only needed to use one to do the entire job. I had heard that the bit that comes with this attachment breaks easily, so I didn't bother to try it. I just bought the bits from Leakyshower.com.

Save $10 and just buy the bit
The attachment doesn't keep the bit centered and won't work near corners. The housing has two tabs that are supposed to guide the bit along the grout line. The problem is that the housing is made of cheap plastic so when you tighten it it distorts and causes the bit to be off center. This is only good for very small jobs and they tend to be near corners, so for get this tool. I found that I could easily complete the job freehand. So just buy the bit size that you need and save $10 (or $15 in some stores).

Dremel Grout Removal Kit When Doing A Floor
This works OK for a small floor area only such as 1 or a few tiles at most. Due to hardness of the grout the bit will definately break ([price] to replace)after about 10 mins or less of use. Dremel is aware of this issue and doesn't recommend this kit for more then a small area. Walls are OK if the grout is a softer or vinyl enhanced grout. If you do use this, stop frequently to allow the bit to cool and you may be able to get the bit to last a bit longer.

For floors, use a Dremel with a Carbide Cutter Bit (the one with a star pattern and pointed) and this bit will last forever. Use w/o the Dremel kit and be carefull at the corners of the tiles as this bit will cut into the tile if you don't keep it moving through the intersections. The point allows you to get the grout out of small areas or large.

Note that everyone whom has done grout work on a floor has tried it and quickly broken the bit which comes with the kit. It's easily returned broken though where you purchased it. Dremel's customer service says to return it to them if there's an issue with the store. The realize that the packaging is a bit misleading in regards to the kit's capabilities. ... Read more

Features

• Cut or slot bolts, screws, sheet metal, wood, plastic
• Set includes high speed cutters, sanding accessories, cut-off wheels and mandrel
• See mfg review for specific list of items included

Features

• Three-flute design for controlled cutting in drywall
• Tip designed for fast accurate plunging into drywall
• 1/8-inch shank diameter for faster cutting
• Satisfaction guaranteed

Features

• 5 amps
• 2 speed (25,000 & 30,000) RPM
• CLIC design depth adjustment

Amazon.com Review

Rotozip spiral saws are popular tools, so it's no surprise that people are also hot after Rotozip bits and accessories. This 10-pack of drywall-cut bits, which are used with the Rotozip spiral saw for cutting around in-wall obstacles such as electrical outlets, is always high on our top-sellers list--and why not? It offers 10 bits at a very reasonable price. In tests we found that as long as we didn't push too hard (let the tool do the cutting) they performed like champs. Keep in mind that these particular bits are for making guided cuts in drywall and paneling. Rotozip also makes a bit for tile, a carbide bit for concrete board and plaster, and various saber-cut bits for wood and composite materials. --Mark McDonald ... Read more

Reviews (1)

Drywall bits
These bits are great for drywall. I have been using them to put in the outlet holes. It goes through drywall with ease and it makes accurate cuts. The double-end makes it last twice as long! ... Read more

Features

• Clear TurnLock base for optimal visibility
• Fits most rotary tools including Dremel, Black and Decker, RTX and Tool Shop
• Includes circle and edge guide for miniature edging and dados.
• Integrated vacuum system
• Easy-grip handles for comfort while working

Amazon.com Review

Rotozip spiral saws are popular tools, so it's no surprise that people are also hot after Rotozip bits and accessories. This five-pack of saber-cut bits, which are used to make jig-saw-like cuts with the Rotozip, is always high on our top-sellers list--and why not? The pack offers a nice variety of general-use bits at a very reasonable price. In tests, we ran them through a large variety of wood and composite materials--just about every type of scrap we had lying around the shop--and as long as we didn't push too hard (let the tool do the cutting) they performed like champs. Keep in mind that these particular bits are for cutting wood and composite materials. Rotozip also makes a bit for tile, a carbide bit for concrete board and plaster, and various "guide" bits for cutting around in-wall obstacles such as electrical outlets. --Mark McDonald ... Read more

Reviews (5)

Great bits
For Canadians who cant shop Amazon (I can and do frequently)(love Amazon for the great deals)..these are available at Home Depot for the same price..with currency conversion of course and PST GST

Go slow and keep your cost low.
The trick to using these bitsand keeping them from snapping is setting the depth guide to just below the outside surface that you are cutting, but slowing down your cutting rate the futher down the bit you go. In other words, when you cut a thin material at the edge of the bit, with the guide set low, cut SLOW as the force is on the end of the bit and it can snap easy. Go slow and keep your cost low.

What else are you going to buy?
For general purpose cutting these are the choice. They do well in a variety of non-abrasive materials. Just don't push them hard or you will need another 5 pack right away. The bits do better if you just let the tool do the work. They are kind of hard to control if you want a nice cut. But that's the nature of spiral saws . The down cutting spiral is nice since the dust is blown away from you instead of back at your face. It's pretty simple , if you have a spiral saw , you need these bits.

Great bits for a great product and a real good price.
If you have a Rotozip, you need bits. I'm still learning how to use mine and I have broken a few bits. If you are like me, get a five pack, you will need them.

They work real well and cut through most anything. Just take your time when you are cutting something for the first time. Let the bit do the cutting. Don't try and muscle your way through.

However, if you are cutting tiles or ceramic, get the ceramic tool.

Great Bits
These bits are longlasting and will cut through anything. They also leave a real fine finish on the woodwork. I have recommended these bits to my friends. ... Read more

Features

• Satisfaction guaranteed
• Optimum grade of solid carbide for increased durability
• Exclusive diamond shaped edge configuration for effective cutting
• Perfect for cutting ceramic wall tile, plaster, and stucco
• 1/8-inch shank diameter for faster cutting

Reviews (1)

Good bit.
Gets the job done.More than this I cannot ask. ... Read more

Amazon.com

We don't believe there's a golfer on the planet who wouldn't like a better score, and this little Dremel kit is a dream come true. Any compacted soil on your clubs can affect your trajectory; but a quick buzz with this neat little gizmo and your clubs are ready for the Masters. You can also clean off your golf spikes with the special bristle-brush attachments for a smooth pivot. The pros' caddies clean their clubs before every shot, and we think it'll be your habit, too, once you try out this handy kit. The carrying case clips neatly right to your golf bag and because it runs on good old AA batteries, there's never any recharging. Two smooth speeds deliver the power you want, and changing brushes is a snap. It's the perfect gift for the golfer who has everything except a perfect score.--Kris Jensen-Van Heste ... Read more

Features

• 6.0 Volts of power for light-duty, precision cleaning
• Two-Speed (6,000 and 12,000 rpm) for versatility
• Lightweight and portable for cleaning clubs anywhere, anytime
• Includes two accessory brushes for safe use on woods, metals and graphite clubs
• Clip-on carrying bag clips to golf bag for easy portability

Reviews (1)

More than Golf
I frankly have zero interest in golf, but I did need a portable, light-duty rotary tool for cleaning battery contacts and light buffing, and this one does very well. It runs on disposable AA alkaline batteries rather than a rechargeable battery pack, and I consider that a plus, since it results in lower immediate cost and avoids the irritating self-discharge characteristics and lengthy recharge times of NiCd and NiMH batteries. Torque is limited, but ample for things other than metal grinding or wood routing. It's a useful tool. ... Read more

Features

• Made In USA
• Quick Change Collet Nut
• Customized Storage Case
• 30 Assorted Accessories
• 175+ Uses Book

Reviews (4)

Great product but not a great value.
This is a great product that will save the owner much time. It is a must have for anyone that does home/auto repair. I was trying to remove a rusted nut when I bought this product. I had it off in seconds. I can't say enough on how useful this tool is. I gave it only 3 stars because the Dremel 3956 or 3962 are a better value. Both the 3956 and 3962 have a variable speed Dremel instead of just a 2 speed Dremel and the 3956 includes the flexable shaft. The price to go from the 2850D to the 3956 is about $10 and the 3962 less than the 2850D. Still you can't go wrong on any of the Dremels.

One of the most usefull tools in my shop
This purchase was my first Dremel tool. I've used it to sand, grind, cut and fabricate small pieces or to modify larger pieces. You can do almost anything with one of these things. And with all of the new attachments they are coming out with....it just gets better....buy one...seriously... you wont regret it.

A life saver and a staple in any tool collection
This is a tool that you can't appreciate until you buy it and allow it to "save the day" time after time. Since I purchased this kit I have taken on jobs where I would never have imagined this tool finding an application, and without fail, before the project is finished, I find that I not only put it to use but I would have been stuck at a dead end were it not for this kit. Buy it and let it prove itself you wont be sorry.

Perfect Tool
I've used this tool mainly for metal works. It's good for those detail works some people face. It's a slow job working with metal but if you have patience it's accomplish what you're working on. I recommend this for anyone. I haven't worked on other material such as plastic but should be easy enough with this tool. ... Read more

Features

• Includes 4 collets--1/8", 3/32", 1/16", 1/32"--and collet nut
• Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8"
• For use with all rotary tools EXCEPT models 1, 2, 260, 270, 280, series 1 or earlier

Reviews (3)

Gotta have it
The quick change collet nut comes with every Dremel rotary tool but if you loose one you're sunk. It's good to have an extra one on hand in case the unthinkable happens.

Indispensable part of the Dremel
You really can't use the Dremel to its fullest without the Dremel collet nut. The Dremel Chuck is nice, especially if you are always changing accessory bits because the Chuck helps save time. I like the collet nut because nothing holds the bit tighter than the proper sized collet along with a collet nut. I use my Dremel hard, and the collet and collet nut makes sure the bit does not work loose.

Pass this by and get the chuck instead
Change out different collets to fit different diameter Dremel bits? I don't think so. You'll save yourself quite a bit of time, energy, and frustration if you get the Dremel 4486 MultiPro chuck instead.

The chuck costs a bit more, but if you do projects that require constant bit changes, it'll be well worth the money.

'Late! ... Read more

Features

• Includes Rotary Tool, 30 accessories, 2 spring clamps, and kit box
• Powerful, high torque motor to complete jobs faster
• Exclusive Flip-Lock spindle lock system provides quick and easy accessory changes
• Universal collet system accepts all standard rotary tool accessories
• 3-speed (12,000/24,000/30,000 RPM) switch allows for maximum precision in all applications

Features

• Disc of hard abrasive
• Cuts, grooves and trims
• Cuts metal, wood and ceramics
• Five per package

Features

• Diamond point for the Dremel 290 Engraver
• Use this point for continuous duty or commercial work
• Can also be used for decorative engraving

Features

• One year warranty/30 day performance certification
• Efficient cutting action
• Used for a variety of applications
• Quick and easy bit changes
• Comfortable, ergonomically designed body

Reviews (1)

cutout tool
This tool comes in handy when you have a small hole to cut. It works as well in plywood and paneling. It is hard to cut in a straight line free hand. ... Read more