Features

• Tungsten carbide
• Shapes, smoothes, removes hard material

Features

• Manufactured in USA
• Maximum Tip Temperature 1,050 degree Fahrenheit
• 7-3/8 in. tool length.
• 2-1/2 oz. Weight
• Two year warranty

Features

• High-quality industrial abrasive
• Deburrs and grinds
• Curved surfaces
• Do not run in excess of 30,000 RPM

Features

• 1/4" felt disc
• Use 401 mandrel
• Polish metals and plastics
• Six per package

Features

• Use with Dremel 568 grout removal attachment kit
• 1/8" for narrow grout removal

Product Description

Turns the Advantage rotary saw into a variable speed plunge router!. Fine adjustment for precise routing depth. Two-post design for greater control and precision. Coated aluminum base will not scratch work surface. Plunge lock-in handle for fast and easy plunge locking. Two depth stops with quick release for rapid adjustment of routing depth. ... Read more

Features

• Description: Plunge Router Attachment.
• Handle: Two-Post.

Features

• 1/16" Dia. Carbide Bit
• Remove grout with ease.
• Ideal for use on wall tile grout
• Use with #568 Grout Removal Attachment

Reviews (5)

These bits break real fast
I started to use these bits for removing the grout on the tile above the bathtub. The bit worked fine for awhile, then it broke. I purchased several more of the 1/16" bit and even tried the larger one. They heat up and break. They are not cheap to replace. I found better bits at leakyshower.com for a fraction of the price. The dremel bits work, yet are not worth the cost. Maybe next time I'll just scape out the grout by hand.

Broke, & Broke again
This bit cuts very quickly at first but breaks rapidly. This works fine to replace a broken tile or two but isn't for a big job by any means.

Perfect bit for narrow tile
I never thought they made a grout removal bit this narrow until started helping my son remodel an apartment building he recently purchased. The 1 inch square tile in the bathrooms had the narrowest of space between the tiles. When it came to regouting the Dremel 569 bit did the trick. I think the bit would be too narrow for using on regular 1/8" or larger grout.

Get the thicker bit
Dremel makes a 1/8" thick bit. It's a lot sturdier and addresses the problem mentioned above.

Grout Drill Bit
We are currently in the process of degrouting bathrooms as part of a large business project. The bits work great with newly grouted walls and last a good amount of time. However, when degrouting in an older bathroom if you hit some larger granulated grout because they cannot take the tension they snap off and now you have to replace it.

Have only been able to purchase in 1-per-package which isn't cost effective at 11.00/piece. On average we are using 2-3 bits per bathroom -- after 44 bathrooms you can figure out the cost!!! ... Read more

Features

• 3/4" wheel-shaped brass brush
• Cleans gold, bronze, copper or brass
• Do not run in excess of 15,000 RPM

Product Description

Dremel 4486 The Dremel Chuck allows you to quickly and easily change accessory bits on Dremel rotary tools without changing collets. It will accept all accessory bits with 1/32" to 1/8" shanks. Use with rotary tool models 275, 285, 395, 398, 750, 770, and 780. Also use with Dremel attachments 212, 225, 575, and 961 ... Read more

Features

• Chuck allows quick and easy accessory changes without changing collets
• Accepts accessories with 1/32" to 1/8" shanks
• For use with DREMEL rotary tool models 275, 285, 395, 398, 750, 770 and 781

Product Description

The G440 Kool Grind is the ideal companion to Granbergs Grind-N-Joint, Dual-Sharp, and Blue Grit Grinding Stones. Simply hold grinder wheel to Kool Grind for a few seconds every second or third tooth to experience cooler, faster grinds, every time. The Kool Grind smoothes the grinding surface to reduce friction and burring that can damage the grinding wheel-and your chain, which means that your stones and your grinder will last longer and perform better ... Read more

Features

• Quicker, cooler grinds
• Extends life of grinding stone
• Prevents clogging and glazing
• One stick will last 100s of grinds
• suitable for all stone sizes

Features

• High-quality industrial abrasive
• Sharpening and deburring on hard materials
• Flat and slotted surfaces

Features

• High-grade steel
• Best on soft materials
• Routing, inlaying and mortising
• Made of high speed steel

Features

• 1/8" Outlet Zip Bits for smooth, clean cuts through drywall
• Plenty of blades for that big drywall project
• The original RotoZip Bit for basic drywall cutouts
• 10-pack of bits for use with RotoZip Spiral Saw Power Tools

Reviews (1)

Fine, but error in description
First of all, this is NOT a 1/4" bit... it's the standard 1/8" drywall bit. It has the standard cutting tip that will cut right through items below the sheetrock so be careful. Guidepoint bits have a quarter inch or so at the tip with no cutting area, so they will break before cutting into studs and such under the drywall...

That said, the entire rotozip concept rocks! ... Read more

Product Description

1/8" & 3/32" shank tungsten carbide cutters. Model No. 9909; Tip size: 1/8". ... Read more

Features

• 1/8" & 3/32" shank tungsten carbide cutters
• Tip size: 1/8"

Features

• 1-pack
• Solid carbide construction
• Durable, with long lasting sharpness
• Cuts ceramic tile and cement board
• Fits many cutout or rotary tools

Features

• A precision-ground abrasive made for extended usage
• Ideal for sharpening chain saw blades, quickly and easily
• Use with Dremel chain saw sharpening attachment 1453
• 7/32" diameter

Product Description

X-bits. The most versatile bit for all types of wood and wood composites up to 1" thick, fiberglass, solid surface material, vinyl siding, aluminum siding, plastics, and laminates. Precision of 1/8" bits and strength of 1/4" bits. 5/32" shank. For use in Rotozip cut-out tools. 2 bits per pack. For Use with RZ25 ... Read more

Features

• 5/32" Shank
• For Use with RZ25 Drywall Router
• Precision of 1/8" bits and strength of 1/4" bits

Features

• 7122

Product Description

MODEL NO.: 480; TIP SIZE: 1/8". ... Read more

Features

• 480

Product Description

Diamond wheel point, 5/64". 3/32" shank, long cone. ... Read more

Features

• 7134