Product Description

Diamond engraving point for Dremel 290 Engraver. ... Read more

Features

• 9929

Product Description

Includes 10 assorted bits, open end collet wrench, quick-change collet nut and quick start book. ... Read more

Features

• 395

Features

• A high-speed cutter made of steel tipped with diamond particles
• Ideal for fine detail work on wood, jade, ceramic, glass, hardened steel and other hard materials
• Removes material quickly and easily
• Includes (1) 7103 diamond ball point for curved surfaces and (1) 7144 diamond taper point for hard-to-reach areas

Product Description

Dremel 426 A cutting disc made of a hard abrasive and reinforced with fiberglass. It is 0.045" (1.2 mm) thick with a diameter of 1 1/4" (32.0 mm) 5 per package. Ideal for cutting, grooving and trimming all kinds of materials--including metal, wood and ceramics. You can use it to cut screws and rusted bolts, make slots in screw heads, trim castings and more ... Read more

Features

• Disc of hard abrasive
• Cuts, grooves and trims
• Cuts metal, wood and ceramics
• Five per package

Features

• Rotozip 1/4-inch collet
• For use with Rotozip's Spiral Saw power tool and Zip Mate attachment
• One collet per pack

Features

• Fits Dremel, B & D and Craftsman rotary tools.
• Locking Depth stop
• Lightweight high impact plastic construction.
• Includes drywall cutting bit

Product Description

Dremel 503 Whether you are working with metal, wood, rubber or plastic, flapwheels will grind and polish flat or contoured surfaces. Flapwheels are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. As the flaps wear down, new abrasive is continuously exposed. This prevents clogging and gives a uniform, constant finish throughout the life of the flapwheel ... Read more

Features

• 3/8-inch, 120 grit

Features

• High-speed cutter with 1/8" steel shank
• Use with Dremel Advantage high-speed rotary saw
• Can be used with any Dremel MultiPro high-speed rotary tool

Product Description

Set Includes: SA-5: Cylindrical shape 1/2" X 1", SA-3: Cylindrical shape 3/8" X 3/4", SC-3: Cylindrical radius end 3/8" X 3/4", SC-1: Cylindrical radius end 1/4" X 5/8", SD-1: Ball shape 1/4", SD-3: Ball shape 3/8", SF-3: Tree shaped radius end 3/8" X 3/4", SF-5: Tree shaped radius end 1/2" X 1". ... Read more

Features

• Blow Molded Case
• Should not exceed maximum 30000rpm
• All above burrs are 1/4" shank, USA standard

Features

• Use for grinding and polishing flat or contoured surfaces
• New abrasive is continuously exposed to prevent clogging and give a uniform finish
• Best as a finishing sander after heavier surface sanding and material removal is completed
• Great for removing rust

Product Description

This 3/16 inch 120 grit flapwheel is useful for sanding hard to reach concave areas. It also works well as a finishing sander after heavier surface sanding and material removal has been completed. Dremel has been producing innovative, high quality tools for over 65 years.Type: TOOLS AND ACCESSORIES ... Read more

Features

• 3/16 in. 120 grit

Features

• High-quality industrial abrasive
• Deburrs and grinds
• Slotted surfaces

Product Description

MODEL NO.: 482; TIP SIZE: 1/16". ... Read more

Features

• Techni-Tool Part #302FI202
• Manufacturer Part #482

Product Description

1/8" and 3/32" Shank tunsten carbide cutters. Model No.: 9901; Tip size: 1/8". ... Read more

Features

• A high-speed cutter made of tungsten carbide
• Tungsten carbide is the hardest material known next to diamonds
• Ideal for shaping, smoothing or removing hard material
• For hardened and stainless steel, cast iron, nonferrous metals
• Also works on fired ceramics, plastics and hard woods

Product Description

Model No.: 106; Tip size: 1/16". ... Read more

Features

• High speed cutter designed for precision engraving
• For carving and routing wood, fiberglass, ceramics, plastics
• Also for jewelry, soft metals

Product Description

Dremel 997 3/32'' x 3/8'' Grinder 1/8'' Shank ... Read more

Features

• A high-quality industrial abrasive made for long term use
• Ideal for sharpening, deburring, and grinding on most surfaces
• Perfect for stainless steel
• Designed for working with flat and slotted surfaces

Product Description

Model No.: 483; Tip Size: 1/32". ... Read more

Features

• Tip Size: 1/32"

Product Description

Model: 408; Description: Coarse 60 Grit; Dia.: 1/2". ... Read more

Features

• Made of aluminum oxide, coarse 60 grit
• For rough-shaping and smoothing wood and fiberglass
• For removing rust from metal surfaces
• For shaping rubber surfaces

Product Description

Stump cutters are made from solid Tungsten carbide brazed to a heat treated steel shank. The cutter surface has a cross-cut pattern of serrated knife edge cutters. These cutters are more aggressive than most other cutters and can remove a great deal of wood with little hand pressure, yet leave a smooth surface. ... Read more

Product Description

MODEL: 425; DESCRIPTION: EMERY IMPREGNATED; USE WITH: MANDREL 402. ... Read more

Features

• 425