Features

• Fine tunes depth setting
• Ideal for mounted routers
• One year warranty, One year service contract, 30 day no-risk trial

Reviews (2)

Works, but takes too long to undo for bit changes...
This product does what it's supposed to do, but changing bits once you have it cranked down is a pain. It takes forever to back it off so you can get to the collet. It either needs a quick-release, or it needs a Phillips screw head mounted in the center of the know so you can use a power drill to tighten it/loosen it quickly. I drilled out the end of mine and epoxied in a good quality No. 2 Phillips machine screw--with my cordless drill it's a lot easier to run it up or down now.

Fine Depth Adjuster
I overlooked this item when purchasing the router. I borrowed one to see if it would help ease setting the router depth, it worked very well. I ordered one from Amazon.com ASAP! ... Read more

Product Description

Used for making 90 DEG corner joints in wood for 9/16" to 1" material. Instructions for use provided. ... Read more

Features

• Cutter Dia.: 3"
• Cutting Length: 1"
• Overall Length: 2-1/2"

Product Description

Cut perfect inlays with this Inlay Kit and your shop-made template. Simply slide on the bushing to rout the cutout and then remove the bushing to cut the perfectly matched inlay. Includes a 1/8" solid carbide spiral cutter and alignment pin. Fits Porter Cable® routers and other routers with template guide adapters. ... Read more

Product Description

For Drill Press ... Read more

Features

• 2-Flute, Industrial Grade Carbide Tipped 2-Flute One Piece Rosette Cutter
• Cutting Diameter : 2-5/8"
• For Drill Press
• Shank Diameter : 1/2"
• Shank Length : 1-1/2"

Features

• For single hand gripping and through-the-top dust collection
• For the 891 2-1/4 Peak HP GRIPVAC Router

Features

• For making wooden signs, nameplates and plaques.
• Router attaches to universal mounting for tracing letters and drawings.
• Includes templates for Old English and modern lettering.

Features

• Hi-speed motor for powerful smooth cuts
• Contoured double handles for comfort and control
• Large calibrated depth control ring
• Shaft lock for quick changing of bits with just one wrench
• 3-1/2" diameter detachable motor for use on commercial router bases

Features

• MicroGrain Solid Carbide; 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter
• 4" Overall Length

Features

• Ideal for 1/4" to 3/4" plywood.
• All bits have 1/4" shanks.
• Routs perfectly fitted grooves and dadoes.
• For use on hand-held and table-mounted portable routers.
• Cuts all composition materials, plywood, hardwood and softwood; and includes wooden storage box.

Features

• Twenty templates per set.
• Designed for 9-1/2" to 22-1/2" (finished width) doors or frame & panels.
• Can be used without the Frame & Panel Master.
• Lifetime guarantee

Features

• 12 piece carbide general purpose set
• 1/4-inch shank bits
• Includes a handy storage case
• Uses include sign making; creative decorative edges on projects such as moldings, furniture, and drawer fronts; making strong joints for projects such as jewelry boxes and drawers; accurate cutting in laminates and veneers

Product Description

Used for making 90 DEG corner joints in wood for 9/16" to 1" material. Instructions for use provided. ... Read more

Features

• Cutter Dia.: 3"
• Cutting Length: 1"
• Overall Length: 2-1/2"

Features

• Make your dadoes fit better with these straight bits sized for modern plywood
• Set includes 7/32", 15/32" and 23/32" and a wooden box
• 1/2" shank

Features

• Jaws holes accept steel jaw teeth so it holds on a steel table
• A perfect band saw fence
• T-track accepts a variety of accessories: stops, router plates, framing blocks
• T-track profile matches on all the clamps so guide plates and stops will fit on all your clamps
• Scale ruler available in metric or inch

Features

• Use as a doweling jig too
• Make mortise and tenon joints with a hand drill
• Strong joint with increased side-grain gluing surface
• Inexpensive, quiet, simple, safe
• Joint depth limited only by drill bit length

Features

• Kickback reducing design for safe bit use
• Bit design makes glass doors look as good from the back as the front
• Micro grain carbide for razor sharp cuts
• Non-stick Perma-SHIELD coating reduces gumming, rusting and corrosion
• Precision computer balanced bits for extreme accuracy

Reviews (1)

Frustration
Freud 99-280 Recoverable Bead Glass Door Bit Set, do a beautiful job once you have zeroed in on the right settings. However doing that is a VERY difficult job, and is really frustrating. The problem is exacerbated by the fact that Freud mysteriously provides no instructions , diagrams or even any recommendations for their use. I have tons of Freud blades and router bits, and my biggest complaint is they almost never have any instructions. The biggest problem with this bit set is when you remove the glass bead. If you are of a 32nd of an inch the tenons will be either to short or to long, and in the earlier case there is no way to correct it. I will still buy Freud products, but I wish they would spend a few bucks and create an instruction manual. Many of their competitors have already done so. ... Read more

Product Description

The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses. The RA1054 also includes a pivot plate and can be easily converted into a circle guide for making circles and arcs up to 32 inches in diameter. ... Read more

Features

• Guides cut along the workpiece edge or up to 8" from the edge
• Precision fine adjustment control - Includes hardware, pivo plate
• Easily converts into circle guide for making circles up to 32" in diameter
• Dust extraction hood with adapter for 1-1/4", 1-1/2" and 35 mm vacuum hoses
• Manufactures List Price $58.33 SAVE $18.34

Features

• Adapts 1/2" collet to 1/4" for use with 1/4" shank bits
• Fits all standard 1/2" collets

Features

• Manufactures List Price $49.98 SAVE $16.39
• Item Description - Router Table Mounting Plate
• Used on Model Number RA1180 - Benchtop Router Table
• Ready to be drilled to accept most routers (except D-Handle models)

Features

• Wood case
• Five piece cabinet door set
• 1/2-inch shank
• Use withtable mounted router
• Includes 99-512 panel bit

Reviews (1)

Great bits!
I purchased this set and they cut perfectly. Every router bit I own is made by freud. There bits cut very smoothly and they are well built. This set includes 5 bits, a matched set of rail and style bits, a glue joint bit, a raised panel bit (99-512 instead of the one that reguraly comes with the set)Bits cut so smooth that you hardly have to sand. have used other name brand bits and the freud outperform the others 10 to 1. Great bits and very well made. ... Read more