Product Description

You get two ceramic nozzles and one washer. ... Read more

Features

• ALC
• Nozzle Size: 5/32in.
• CFM @ 80 PSI: 25

Product Description

You get two ceramic nozzles and one washer. ... Read more

Features

• ALC
• Nozzle Size: 1/8in.
• CFM @ 80 PSI: 15

Product Description

ALC Sandy Jet Model F100DM Pressure Blaster. Manual pull up tank closure. Adjustable abrasive flow valve. Pressure relief valve - 125 psi. Pressure gauge. Pressure relieving ball valve. Blast hood included. Blast hose - 1/2" ID x 8ft. Tank volume - .9 CuFt. Wheels - 6" . Welded steel frame. Approximate capacity - 90 lbs. Made in the U.S.A. Comes with one 1/8" and one 3/32" ceramic nozzle and three sealing blocks. Minimum air volume 7 CFM @ 80 PSI. Availability: In stock. ... Read more

Product Description

Tank size: 12" / 305 mm diameter, 20" / 508 mm length
Dimensions: 33" x 19" x 13" / 432 mm x 330 mm x 229 mm
Shipping weight: 49 lbs. / 22 Kg. ... Read more

Features

• Pressurized design gives 30% more sandblasting power than siphon units
• Portable unit features 6" rubber wheels
• Welded steel construction
• Includes 9' hose, shut-off valve, water trap, filling funnel and canvas hood
• Use with any dry abrasive such as silica sand or glass bead

Product Description

Fluorescent lighting located outside work area of cabinet allows more room for parts. This also eliminates damage to bulbs from blasting. Complete dust collector system. Easy to change window with inexpensive window protection Expanded steel reinforced work surface. Full width opening on all flip top and counter balance units. Hopper trap door for easy media changes and cleaning. Air pressure regulator and gauge. This controls pressure to gun allowing flexibility in finishes. Door safety switch. Designed to automatically shut off air flow when cabinet is opened. Tungsten carbide blast nozzle, far greater life than ceramic or steel nozzles. Cabinet constructed of 14 and 11 gauge steel. Working Area: (Width 42", Depth 24", Height 23") Overall Area: (Height 65", Depth 42", Width 45") ... Read more

Features

• Includes 100 C.F.M. Dust Collector
• All seams butt welded to prevent leakage.
• Heavyweight cloth lined neoprene gloves.
• Foot pedal operated 12 C.F.M. blast gun.
• Approximately 200 hours with aluminum oxide.

Product Description

Fluorescent lighting located outside work area of cabinet allows more room for parts. This also eliminates damage to bulbs from blasting. Complete dust collector system. Easy to change window with inexpensive window protection Expanded steel reinforced work surface. Full width opening on all flip top and counter balance units. Hopper trap door for easy media changes and cleaning. Air pressure regulator and gauge. This controls pressure to gun allowing flexibility in finishes. Door safety switch. Designed to automatically shut off air flow when cabinet is opened. Tungsten carbide blast nozzle, far greater life than ceramic or steel nozzles. Cabinet constructed of 14 and 11 gauge steel. Working Area: (Width 48", Depth 24", Height 23") Overall Area: (Height 65", Depth 25", Width 51") ... Read more

Features

• All seams butt welded to prevent leakage.
• Heavyweight cloth lined neoprene gloves.
• Foot pedal operated 12 C.F.M. blast gun.
• Approximately 200 hours with aluminum oxide.

Product Description

Protects your eyes and face. Keeps sand out of eyes, hair and nose. Also helps keep sand out of clothing. 3 1/2in. x 4 3/4in. window lens provides good visibility. A 'must' for all sandblasting operations outside of sandblasting cabinets. ... Read more

Features

• Hood is made of plastic and PVC board
• 100% Cotton for the mask

Product Description

MAGNEHELIC GAUGE / FILTER MONITOR
QUICK RECOVERY
DEBRIS SCREEN
10 CU. FT. STORAGE HOPPER
DEADMAN CONTROLS
ADJUSTABLE MEDIA FLOW VALVE
25 FT. BLAST HOSE WITH 5 / 16 CARBIDE NOZZLE
90 CFM @ 60 PSI REQUIRED 25 HP (5 / 16 NOZZLE)
PRESSURE TANK SIZES 1 CU. FT. ... Read more

Features

• HI - STATIC VACUUM RECOVERY
• 120 VOLT ELECTRICAL SERVICE
• 25 FT. VACUUM RECOVERY HOSE
• NON - CLOG PICK UP WAND
• PULSE JET CARTRIDGE CLEANING

Product Description

Pressure Tank: 6 CU FT, ADJUSTABLE AIR REGULATOR FOR BLAST PRESSURE CONTROL. AIR MEDIA FLUFF AERATOR, AND ADJUSTABLE MEDIA VALVE.
Operator Safety DEAD-MAN controls: PNEUMATIC DEADMAN CONTROLS TO CONTROL THE STARTING AND STOPPING OF THE BLAST
Dust Collector: 900 CFM HIGH STATIC DRY DUST COLLECTOR, WITH SUMP CLEAN OUT.
Fan Blower: A 7 ½ HP HIGH STATIC FAN IS PROVIDE FOR MEDIA RECOVERY. THE FAN IS A DIRECT DRIVE UNIT WITH DAMPER FOR FLOW CONTROL.
Electrical Controls: CONTROL PANEL WIRED FOR 230 OR 460 VOLTS 3 PHASE PLEASE SPECIFY VOLTAGE WITH ORDER.

WARNING:
DO NOT USE SAND. SAND WILL CAUSE SILICA DUST, WHICH IS THE CAUSE OF SILICOSIS DISEASE, A CONDITION OF MASSIVE FIBROSIS OF THE LUNGS. THIS STATEMENT INDICATES POTENTIAL PERSONNEL HAZARD. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONNEL INJURY. ... Read more

Features

• Floor Recovery: LOW PROFILE RECOVERY PICK-UP TROUGH, UP TO 12 FEET LONG, 5" DIAMETER FLEXIBLE HOSE
• Reclaimer: HEAVY STEEL CONSTRUCTION WITH AIR WASH ADJUSTMENTS TRASH SCREEN WITH AIR VIBRATOR
• Hopper: TWENTY FIVE CUBIC FOOT STORAGE HOPPER LOCATED BELOW THE RECLAIM AND ABOVE PRESSURE POT
• Blast hose: 50' OF 1 1/4" STATIC CONTROL, BLAST HOSE, WITH QUICK CONNECT COUPLINGS
• Blast Nozzle: (1) 3/8 TUNGSTEN CARBIDE NOZZLE

Product Description

MAGNEHELIC GAUGE / FILTER MONITOR
QUICK RECOVERY
DEBRIS SCREEN
10 CU. FT. STORAGE HOPPER
DEADMAN CONTROLS
ADJUSTABLE MEDIA FLOW VALVE
25 FT. BLAST HOSE WITH 5 / 16 CARBIDE NOZZLE
90 CFM @ 60 PSI REQUIRED 25 HP (5 / 16 NOZZLE)
PRESSURE TANK SIZES 1 CU. FT. ... Read more

Features

• HI - STATIC VACUUM RECOVERY
• 120 VOLT ELECTRICAL SERVICE
• 25 FT. VACUUM RECOVERY HOSE
• NON - CLOG PICK UP WAND
• PULSE JET CARTRIDGE CLEANING

Product Description

3in. x 5in.. ... Read more

Features

• Saves you surface-cleaning time and labor!
• Blaster holds 90-110 lbs. of abrasive material
• Has a safety shutoff and ASME code tank
• You also get a 10 foot x 1/2 inch H.D. sandblast hose, pressure gauge and pull-up closure plug
• One 3/32 inch and two 1/8 inch ceramic nozzles

Product Description

Foot valve fits cabinet blasters #155483 and 155448. ... Read more

Product Description

Combines sand with high speed water from your pressure washer to remove graffiti, paint, baked-on grease, rust and more. 10 feet long. Maximum 1800 PSI, 7 GPM. ... Read more

Features

• Easy one-hand operation; lever flow control
• Fits our sandblaster #'s 155340, 155341 and 155345
• Includes one replaceable 2.4mm ceramic nozzle

Product Description

No need for hose adapters! Valve stops flow of abrasive when lever is released or handle is dropped. One 3/32in. and two 1/8in. nozzles included. Order other nozzles separately. ... Read more

Features

• ALC

Product Description

You get 3 nozzles, 1 air jet, 1 air jet washer and 1 Allen wrench. 1/4in., Model No. F-16-MK. ... Read more

Product Description

You get 3 nozzles, 1 air jet, 1 air jet washer and 1 Allen wrench. 13/64in., Model No. F-16-SK. ... Read more

Product Description

Delivers a steady flow of air, liquid, sand or any blasting material. Place the pick-up tube in any container that holds abrasives. Use the 10-ft. siphoning hose and a cleaning solution for liquid blasting. Remove the abrasive hose to make an air cleaning gun. 60 to 120 PSI with 1/4in. NPT air inlet. Includes 3 extra nozzles, hex key and 5/64in. steel air jet. ... Read more

Features

• Orifice Size: 1/2in.
• Aspirator System Assures Uninterrupted Flow of Any Blasing Material
• CFM: 11 for 3/8in. Hose and 10 for 1/4in. Hose

Product Description

This gravity feed sandblast gun features adjustable sand flow and a ceramic nozzle. Its one piece handle makes it easy to use. Also features a safety vented tank and replaceable hardened steel mixing chamber. Specifications: Operating Pressure 60-125 PSI; Working Pressure 100-125 PSI; Air Consumption 12 CFM-125 PSI; Min. Air Compressor 3 H.P.; Fitting Size 1/4 NPT; Container Capacity 26 OZ. Gun Material ABS; Empty Weight 14 OZ. Max. Particle Size 14 Grit. Availability: In stock Usually ships within 24 hours. Ships via UPS. ... Read more