Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• This Solid-Steel Cutterhead With Your Choice Of Optional Hss Knives Can Make Rosettes Up To 3"
• In Diameter. Also, With The Optional Chuck Arbors You Can Easily Adapt Cutterheads Directly To
• Tailstock Or Spindle Tapers. Cutterhead Comes With Shank And Mounts Directly To Drill Press
• Or Wood Lathe.1/2" Shank

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Product Description

STANDARD EQUIPMENT INCLUDES: Motor, reversing switch, magnetic power switch, miter gauge and fence with hold-down springs. ... Read more

Features

• 2 spindle speeds: 7,000 and 10,000 R.P.M.
• 3 H.P., single phase, 220V motor with reversing switch
• 3 interchangeable spindles: 1/2", 3/4" and 1"
• Spindle travel is 3"
• Table with standard wing attached measures 30-1/2" x 28-1/4"

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 1"

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 3"
• Cutting Length: 15/16"
• Cutting Width: 5/8"

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• These Knives Will Produce Intricately Carved Rosettes Or Even Raised Panels On A Drill Press
• You Can Plane Smaller Stock By Using The Flat Profile Knife
• Knives Are Ground On Opposite Sides So Only One Knife Is Needed, 2-5/8"

Product Description

MOULDING KNIVES BASEBOARD ... Read more

Product Description

MOULDING KNIVES CROWN ... Read more

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 4-5/8"
• Cutting Length: 5/8"
• Cutting Width: 1-1/2"

Features

• Set of three matched knives
• Cuts 3/16" triple bead profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta moulding cutterheads

Features

• Set of three matched knives
• Cuts 3/4-inch bead profile
• High-speed steel for durability and long lasting sharpness
• Installs easily on cutterhead with existing set screws
• Fits Delta molding cutterheads

Product Description

Used alone or in conjunction with our Panel Cutters, this carbide-tipped undercutter allows you to mill thicker raised panels to a standard 1/4" to match slots cut with our Stile and Rail sets. Perfect for raised panels thicker than 5/8". ... Read more

Features

• Cutter Dia.: 2-1/2"
• Cutting Depth: 3/8"
• Cutting Length: 1"
• Slot: 1/4"

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Features

• Thick micrograin carbide tips
• Kickback reducing design
• Covered by Freud's limited lifetime warranty

Product Description

Grizzly 3/4" Bore Shaper Cutters feature top-quality C-2 carbide--the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding cutters are constructed with a high-tensile, silver-based brazing, which offers the utmost in strength and durability. Can be used on woods, wood composites, plywood and some plastics at 5,000 to 10,000 RPM. An excellent selection. ... Read more

Features

• Cutter Dia.: 2-5/8"
• Cutting Length: 1-3/16"