Product Description

mfg by: BLITZ USA, INC. ICE SCRAPER WITH SNOWBRUSH Deluxe ice scraper and snow brush in one 4-3/8" acrylic blade 5" snow brush 13000 16 SCRAPER/SNOW BRUSH 16-1/4" ... Read more

Product Description

Replacement wearbars for ATV snowplows feature easy, bolt on applications.Fits item #91000 snowplow. U.S.A. ... Read more

Product Description

Heavy duty rubber snow deflectors bolt easily to the top of ATV snowplows to prevent snow from riding over the top. U.S.A. ... Read more

Product Description

Power Jet burner melts ice, incinerates weeds and tree stumps, and performs other heating tasks. With steel pilot tip, flame control trigger valve, 0-100 PSI pressure regulator PLUS 10-ft. UL listed gas hose, excess flow POL valve, aluminum extender tube and instructions. Requires a 100-lb. propane cylinder. U.S.A. ... Read more

Product Description

BRACED SNOW PUSHER Braced blade made of tough rigid polyethylene Impervius to moisture Low coefficient of friction Fiberglass handle 77024 24 BRACED SNOW PUSHER 24" ... Read more

Product Description

Designed for operating in cold, wet weather, these Tecumseh gas engines have established an excellent reputation for dependable wintertime performance. Rewind starter with provision for optional 120 Volt electric starter, sold separately. Fixed jet carburetor, carburetor side exhaust and manual controls. ... Read more

Features

• 15.04 cubic inch engine, dual side oil drain, 19 ounce oil capacity
• 2 3/8in. x 3/4in. crankshaft has 3/16in. keyway and is tapped 3/8-24
• Bolt mounting circle is 3 5/8in.
• 4-quart fuel tank, model 907366

Features

• Replaces Meyer No.: 21918

Product Description

This kit is designed for ATVs that already have a winch. Bolts directly to the front frame. For mounting either #91000 or #910010. Heavy gauge steel construction with rust inhibitor and powder coat finish. Includes hook loop for winch hook when plow is removed. Fits 1996-2000 models; choose kit based on ATV model. U.S.A. ... Read more

Product Description

Scratchless Car Broom with offset handle clears snow where scrapers can't! Sweeps off inches from hoods and roofs to prevent startling blow-offs. Polurethane foam on steel pole retracts 42-1/2" to 26" to store in a trunk. ... Read more

Features

• Vinyl grip on end of pole
• 18" x 12' slick plastic slide
• Avalanche patented cutter frame with wheels
• 16' fiberglass handle in 4' sections
• Snap-on coupler system for easier storage

Reviews (8)

Avalanche parts
Parts can be ordered from the Avalanche company, located in Plymouth, Minnesota. Their number is 1-800-378-3088. Hope this helps you up in Michigan, Fritz!

Part needed
I am a 67 year old male who lives in the snow country of the Upper Peninsula of Michigan. Our snow fall has exceeded 195 inches to date and I have had to remove snow from the roofs of our home and garage twice. The Avalanche make this easy. However, I have a problem. I need to replace the plastic slide sheets on each of my avalanches (I own two) as they are badly torn because of excessive use. My avalanches are the true originals. The plastic slide sheets are 21 3/4 inches wide and I have had no success in finding replacements. I would appreciate any assistance I can get in locating slide sheets with this dimension. Other than this problem, the Avalanche is a wonderful snow removal tool.

no backache here
I love the avalanche rake, it is so easy to use and the snow slides right off the roof. No more shoveling for hours. I live in NY where the winters are rough, last week we got over 5 feet of new snow in one week. The avalanche rake really made my life easier. Now I have more time for enjoying the snow. Thanks for a wonderful product.

Fantastic Product
I live in lake effect snow country here in upstate New York.
The Avalanche arrived today via UPS. After a few minutes of easy assembly, I was out tackling the roof. Had about 1 foot compacted snow on the roof. The roof is relatively steep pitch and it usually takes me about 25 minutes to remove snow with old style aluminum roof rake. I probably spent no more than 5 minutes and not only did it remove the snow easily, but it did a super neat job. This is one of those items that is really too good to be true. I'm going to rig up a gizmo to adapt my 12 foot aluminum swimming pool vacuum pole, so I can extend the Avalanche reach another 12 feet.
I'm also going to make a hand crank that will adapt to the nylock nuts on the threaded shaft so I can roll up the plastic sheet quickly.
What can I say.... Very pleased!

Better Than Expected
If you have ever cleaned a roof off with a snow rake, then you need to try one of these Avalanche systems. I've had one for two years and it's the best snow removing investment I've ever made. Works far better than I could have imagined. My neighbor saw it the first time I used it and told me that it looked too easy to clean a roof with it. He had just purchased a traditional snow rake!!! Get one of these, you won't regret it. ... Read more

Features

• 24" x 17' plastic slide
• 24" reinforced cutter frame with Drift Buster Sheild
• 16' fiberglass handle in four 4' sections
• Snap-on coupler system for easier storage

Features

• Includes 2 wheels & 2 bolts

Features

• 22" aluminum roof rake
• Wheels help prevent shingle damage
• Includes 4 poles for 20' total length
• Lightweight aluminum construction

Reviews (5)

Disappointed
I purchased this product approximately a week ago and I am disappointed with this products performance. I have used the product twice now and I now have HALF the roof rake that I purchased.

When I received the product I took it out of the box and was quite pleased with the overall product that I purchased. Given that the construction was all aluminum and seemed sturdy I felt that I had a tool that I could depend on. The first time that I used it I cleared off my roof and the product worked well. I noticed that the long pole that connects the rake flexed quite a bit while I raised the rake to the roof to clear swaths of snow. I considered that this could eventually be a problem with more use but I though that the poles appearing sturdy would have a long life. Overall the first use went well.

The second use, I started clearing my roof and I noticed that the pole that I hung onto started to bend. After taking another swipe of snow the pole broke in half. Thinking that this could be a defective pole, I took the pole out and used the rake with one less pole. Again, the pole bent and broke. I now have half the snow rake that I bought just a week ago.

I don't know about anyone else, but I am getting tired of manufacturers flooding the market with products that appear to be quality, fetch a quality price and end up being junk.

Stay away from this product! I don't think that my rake was defective. I think that it is just under engineered.

Not much left of it after 2 uses
It started with one of the wheels shattering (it's still there - just square). Then I lost almost all of the bolts even though I tightened them securely according to directions. The left brace is somewhere on my roof - hopefully I'll find it in the spring. The locking button froze when I tried to add another length to reach higher. I was using it on what the meteorologists are calling "champagne powder" when it started to disintegrate. It WAS effective in clearing a lot of the snow but I had to rebuild it first.

Snow rake review
This snow rake is good at best. I purchased this item for my two story roof to remove snow and icicles. The head of the rake is very well constructed but the poles do not lock together well with the spring push buttons. The buttons do not pop tottally through the holes once the extension poles are put together. The first time I used the rake I lost the head off of the poles on the roof. I had to retrive it with a ladder. Also the poles are very lightweight construction. I didn't even assemble all four sections, I only used three of the four, and I was very concerned about the handle bending and breaking. Overall I would rate this item as good.

Works well, but will it last?
I just tried the snow rake for the first time, removing several inches of very heavy, wet, fresh snow from my back roof. This is a hundred times faster and safer than running up and down a ladder with a shovel, and only slightly less effective. Because of the wheels, the rake doesn't scrape the roof bare. Managing the rake is awkward, as is handling anything on the end of a twenty foot pole.

My main worry is that the pole will bend with repeated use -- it's alarmingly flexible to start with. But I can see why the maker didn't make the pole heavier, as it would be even harder to handle.

Great for Soft or powder snow
This will work great on fresh snow, if you get out there and do it right away. If you should wait for the snow to melt a little and refreeze you will have problems as the roof protective wheels tend to ride on top of the snow crust. The actual device is a little sturdier than one I purchased at the local hardware store and I think this is safer to use on my new 8,000-dollar roof. I would say for those that don't procrastinate when it comes to snow removal... GREAT PURCHASE ... Read more

Product Description

Bare Ground Solution Refill Gallon covers 1000 sq. ft. Works to -20 degrees! Shipped to continental US states only. ... Read more

Product Description

Bare Ground Solution de-ices drives, sidewalks, patios before ice or snow accumulates! Spray before or after it snows to prevent buildup up to 3". All natural ingredients are environmentally safe. Includes Sprayer and 1 gallon of solution covering 1,000 sq. ft.; Works to -20 degrees! Shipped to continental US states only. ... Read more

Product Description

Stop damaging ice and snow build-up before it forms with the professional's choice for prevenative snow maintenance. Bare Ground anti-icing/de-ice solution will stop the accumulation of up to 3" of snow. Bare Ground has been extensively tested and used b ... Read more

Features

• DE-ICE 5 GAL BARE GROUND SOLUTION ICE SNOW

Product Description

15 gallon steel drum hopper mounts easily into any 2in. receiver. Black metal frame resists corrosion. Makes spreading seed, fertilizer, game feed quick and easy. Adjustable discharge shield varies spread pattern. Powered by on/off in-cab control that plugs into your vehicle's cigarette lighter. U.S.A. ... Read more

Product Description

Electric lift pulley kits mount to front of ATV rack. For use with electric actuator lift. Electric lift pulleys are designed to specifically fit various makes and models of ATVs. For use with nearly any size Arctic Cat, Honda, Polaris, Suzuki, Yamaha and more. When ordering, please call with the make and model of your ATV for the proper pulley kit. U.S.A. ... Read more

Product Description

Manual lift kits mount to ATV front rack. Includes mounting hardware. For use with nearly any size Arctic Cat, Honda, Polaris, Suzuki, Yamaha and more. When ordering, please call with the make and model of your ATV for the correct manual lift kit. U.S.A. ... Read more

Product Description

EASY way to help protect your customers and employees from falling in your parking lot. Distributes #1 rock salt, calcium chloride or similar material. Tough thermoplastic hopper holds up to 600 lbs. and spreads 3ft. to 30ft. wide. Electronic speed control lets you control spreading action from inside your pickup cab. Sealed ball bearing motor. Power cables and bracket included. Ships truck freight. ... Read more