Features

• Durable rubber-sided case for added impact resistance
• 8-piece set for a variety of spade drilling operations
• Patented micro groove for smoother drilling
• Patented spure for faster drilling
• Storage case with rubberized grip and sliding latch

Features

• Cutting spurs score outside of hole for reduced splintering
• Includes 1", 3/4", 5/8", 1/2", 3/8", bits for variety of bore sizes
• Extension for deeper drilling
• Rapid-Feed tips pull bit through wood and cut three times faster

Features

• Includes 13 spade bits up to 1-1/2"
• Flexible storage case included

Features

• Rapid-Feed tip pulls bit through wood and reduces pressure necessary to drill a hole
• Cutting spurs score outside of hole to reduce splintering

Reviews (1)

Very helpful bits
These bits are very impressive, they will drill through wood basically on their own-but expect a bit of a blowout on the other side of the board. I am not a wood worker so concerns on cosmetics are not too common. As an electrician these spades cut faster, self feed easier and finsh better than any other I have tried. Of course you get what you pay for and these are worth every penny to me. If I may also add-they cannot take much contact with plaster or stone resulting in a very quick dull, you literally do not have to push on these bits resulting frankly in less injuries down the road! ... Read more

Features

• Long length hex shank for fast loading
• The recessed black sleeve prevents accidental release of your bits
• Internal hex drive eliminates slippage

Features

• Quick change bit system for fast, one-handed load and release
• Change bits without re-chucking

Features

• 1/4-inch shank fits all drills and 1/4-inch quick change holders
• Cutting spurs for optimum hole finish
• Full length heat treat for longer life
• Flats on shank prevent bit slipping in chuck
• Hang hole for bit storage and wire pulling

Product Description

Short length allows for access in tight areas (between studs, inside cabinets) where standard length spade bit will not fit. Drills through double studs, and a straight hole in tight areas. Micro-Groove cutting edge with spurs. ... Read more

Features

• Patented micro-groove cutting edge and spurs produce a smoother hole finish
• Double spur design scribes hole before chips are made, producing cleaner hole, less vibration
• Shorter bit length gets into confined spaces (between studs) where standard lengths will not fit
• All bits have a 1/4" hex shank that fits all drills and 1/4" quick change adapters
• All bits are 4" long

Product Description

Includes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1" titanium nitride coated spade bits. Wall rack included. ... Read more

Product Description

Short length allows for access in tight areas (between studs, inside cabinets) where standard length spade bit will not fit. Drills through double studs, and a straight hole in tight areas. Micro-Groove cutting edge with spurs. ... Read more

Features

• Patented micro-groove cutting edge and spurs produce a smoother hole finish
• Double spur design scribes hole before chips are made, producing cleaner hole, less vibration
• Shorter bit length gets into confined spaces (between studs) where standard lengths will not fit
• All bits have a 1/4" hex shank that fits all drills and 1/4" quick change adapters
• All bits are 4" long

Features

• Tungsten Carbide tipped for long life
• Quick Change
• Hardened Shanks will not warp
• Precision ground
• Nitrate for corrosion resistance

Product Description

UltraBore Spade Bits. ... Read more

Features

• Spade Bit
• Unique 15 degrees chisel edge design with more angle to dig into wood
• Iso-Temp proprietary toughening process provides greater durability
• Angled spurs cut a cleaner smoother hole with less binding
• Blasts through wood knots that standard bits just can't handle

Product Description

UltraBore Spade Bits. ... Read more

Features

• Spade Bit
• Unique 15 degrees chisel edge design with more angle to dig into wood
• Iso-Temp proprietary toughening process provides greater durability
• Angled spurs cut a cleaner smoother hole with less binding
• Blasts through wood knots that standard bits just can't handle

Product Description

Bosch SB1019 1-3/8" x 6" Rapidfeed Spade Bit ... Read more

Product Description

The 90112 12" Quick Change Adapter is a great accessory to have with your drill. This Quick Change Adapter has a long length hex shank for fast loading. The recessed black sleeve prevents accidental releases and in turn will save you from loosing your bits. This adapter has a tapered head which is designed to guide the extension through holes and tight spaces. The internal hex drive eliminates slippage, and the nickel plating provides impact and corrosion resistance. Irwin® tool products are made of only the finest materials manufactured to exacting tolerances. ... Read more

Features

• Tapered head design guides the extension through the hole
• Recessed black sleeve prevents accidental release
• Slim diameter chuck and extension will pass through 11/16" hole

Features

• 1/4-inch shank fits all drills and 1/4-inch quick change holders
• Cutting spurs for optimum hole finish
• Full length heat treat for longer life
• Flats on shank prevent bit slipping in chuck
• Hang hole for bit storage and wire pulling

Product Description

15-piece set includes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, and 1 titanium nitride coated spade bits. Wall rack included. ... Read more

Features

• For wood boring applications, Steelex Spade Bits are tough to beat
• Extended cutting spurs for crisp edges
• Titanium nitride coating for long dependable service
• Manufactures List Price $23.95

Product Description

UltraBore Spade Bits. ... Read more

Features

• Spade Bit
• Unique 15 degrees chisel edge design with more angle to dig into wood
• Iso-Temp proprietary toughening process provides greater durability
• Angled spurs cut a cleaner smoother hole with less binding
• Blasts through wood knots that standard bits just can't handle

Features

• For 1/4" and larger electric drills
• 1-1/4" diameter and 6" long
• Micro-groove point and cutting edges with extended spurs for faster, cleaner boring action
• Forged in one piece from Irwin's own special grade tool steel
• Heat-treated full length for extra overall strength

Features

• Patented micro-groove cutting edge and spurs produce a smoother hole finish
• Double spur design scribes hole before chips are made, producing cleaner hole, less vibration
• Shorter bit length gets into confined spaces (between studs) where standard lengths will not fit
• All bits have a 1/4" hex shank that fits all drills and 1/4" quick change adapters
• All bits are 4" long