Product Description

Proto offers a complete range of Tool Storage Products designed to meet the diverse needs of the industry. Professionals throughout the world use Proto tool boxes for heavy-duty industrial applications. Proto tool boxes are available on-the-job anywhere.

Depth: 8-1/2"
Height: 9-1/2"
Weight: 24 lbs
Width: 32"
... Read more

Features

• This Brown Carpenter's Hand Box has a 2,584 cubic inch capacity
• Removable tote tray
• Heavy-duty side handles
• 32"W x 8-1/2"D x 9-1/2"H
• Rolled front edge prevents injury from sharp surfaces

Product Description

This massive rig is guaranteed to make the hair on the back of your head stand up! In fact, because of its extreme amount of storage, you get a bonus set of added suspenders to help you shoulder the load all day long. High-density ballistic nylon (1680 Denier) is the foundation for this Extreme product. Heavy-duty nylon and polyester fabric provide extra strength, and PVC reinforcement gives large pockets and major stress points additional strength and durability. Plastic-reinforced pouch rims keep the bags wide open and ready for use. Fits big-boy waists up to 52in. ... Read more

Features

• Rubber reinforced bottom
• Pockets for a knife, speed square, nails, chalk box and more
• Innovative, built-in cordless tool holder
• Model 55035

Product Description

Labeled heavy duty polyethylene tarps are laminated on both sides for maximum weather proofing, cross weave fabric is designed for maximum strength and durability. High strength rust resistant grommets on each corner and approximately every 3 feet, lightweight, tear resistant, washable, mildew proof and water proof. Finished size is slightly smaller than cut size. ... Read more

Product Description

Gerstner & Sons first introduced the #41 Series in the 1910s. With its classic American styling, golden oak finish and appealing proportions, the Classic Tool Chest is extremely well suited for the safekeeping of treasured items and/or as a handsome accent piece for den or office. This design is well suited to any type of decor. Consider the brass upgrade for a polished look that compliments any room in your house. Every Classic Tool Chest is built in keeping with Gerstners legendary tongue and groove construction. This compact size tool chest is one of our newer designs. Dimensions: 20" W x 13 1/2" H x 10 1/2" D; Interior capacity: 1357 cu. in. Chest fits on top of B42B, B49A, MB90A or RB90. ... Read more

Features

• Made in USA
• Felt Lined interior
• 3" deep top storage compartment
• Fully lockable

Product Description

Great for small gardens, this mini greenhouse measures 4ft. x 6ft. x 6ft. 2in. and features PVC cover with full double front zipper. Comes with steel tube frame that is powder coated for long lasting use. Hunter green. ... Read more

Product Description

Chalimex 1057 Welding Apron Suede Leather ... Read more

Product Description

PROTECT YOUR PLANTS! Just open the greenhouse with the pull string and insert the spiked pole into the ground. The clear PVC cover helps capture sunlight - trap heat - warm the soil and speed plant growth. The unit closes easily with just a pull on the built in closure string. PROLONG THE GROWING SEASON and PROTECT your plants from frost, wind, excessive rain, frost and animal damage. The large size and adjustable make this item perfect for young tomato plants and larger planters. A great gift item for any gardener! ... Read more

Features

• LARGE 49" Diameter x 44" High
• Helps Promote Stable, Healthy Plant Growth
• PROLONGS the Growing Season
• Captures Sunlight - Traps Heat - Warms the Soil - Speeds Growth
• Easy to use - Folds down for storage - Re-usable

Product Description

Our hefty woven poly tarps are water-resistant, and they won't rot or mildew. Strong woven nylon strands are coated and bonded on both sides with polyethylene film. Rust-resistant grommets at corners and approximately every 3 feet along all 4 edges. ... Read more

Features

• Cut Size: 20ft. x 30ft.
• Thickness: 1/16in.
• Weave: 9x9

Product Description

Ideal for smaller tools and accessories. 10in. L x 5in. W x 6 1/4in. H. ... Read more

Product Description

One main pocket for power drill machine. Two pockets for drill tools, etc. Wide belt tunnel slot. ... Read more

Features

• One main pocket for power drill machine
• Two pockets for drill tools, etc.
• Wide belt tunnel slot.

Product Description

5-1/2' x 5-1/2', Storage Shed, Provides Storage Space For Bikes, Grills, & Yard Equipment, Extra Wide Front Opening, Large Panels Allow Quick Assembly, No Tools Required, Can Accept Shelving, Lockable Doors With Upper & Lower Latches, Assembled Size 5'6"W x 5'D x 6'11"H. ... Read more

Features

• Long lasting resin construction
• Capacity of 138-cu-ft., great for storing bikes, lawn furniture, yard equipment and tools
• Padlockable doors with upper and lower door latches
• Built-in support for wood shelf, stay-dry design
• 6’11”Hx5’6”Wx5’D

Features

• One year warranty on defective merchandise
• Two large flared pockets
• Three small pockets
• Two webbed hammer loops
• Waist ties

Reviews (1)

Great tool belt
This is a great "honey do" tool belt! It has plenty for room for tools that you might need around the house.

Seems very sturdy!

Enjoy! ... Read more

Product Description

18in. diameter floor fan is powered by a 1/8 HP steel enclosed motor. Features include three-speed rotary switch, double locking guard, 110° tilt and 6 1/2ft. cord. CFM is 1100 low, 1300 medium and 1500 on high. OSHA approved. ... Read more

Product Description

Legs turn a sheet of plywood (not included) into a spacious folding table with many uses! Simply mount these sturdy 1in. diameter tubular steel table legs to tabletop. Hardware not indcluded. Size: 24in. wide x 29in. high. Legs fold flat for easy transporting and space-saving storage. Hardware or manual not included. U.S.A. ... Read more

Features

• Capacity: 2000 lbs. LI>Steel Gauge: 6-gauge

Features

• 5 Large, 4 Small, And 4 Pencil Pockets
• Center Pocket Is 4-1/2" Wide X 4" Deep
• Continuous Shoulder Straps Lace Through Waist Level Grommets For A Perfect Fit
• Apron Weight Will Not Hang On Neck
• Right And Left Side Hammer Loops.

Product Description

Chalimex 1070 H Plier Holder With Safety Snap ... Read more

Features

• One main pocket for plier with safety snap
• Wide belt tunnel slot

Product Description

8 Drawer Heavy-Duty Deluxe Ball-Bearing Steel Workbench. Galvanized steel-over-wood 1-1/4" thick benchtop. One molded benchtop storage tray with dividers. Steel pegboard sides for hanging tools. ... Read more

Features

• Height: 37.90".
• Shipping Weight: 206 lbs.
• Depth: 23.20".
• Width (inch): 60.90.

Product Description

Protect yourself and your family from the sun's harmful U.V. rays. Coolaroo ® Shade Sails block out 90% of the sun's dangerous rays. Shade Sails are a trendy and less expensive alternative to a conventional shade canopy or awning and will allow you and your loved ones to fully enjoy the outdoors. Coolaroo ® Shade Sails are made from a unique high quality material, which breathes, keeping the area underneath cool and you more comfortable. Since Coolaroo ® Shade Sails are knitted instead of woven, they are extremely resistant to tearing and fraying, ensuring the fabric's durability. In addition, Coolaroo ® Shade Sails are not affected by moisture or temperature extremes. Coolaroo ® Shade Sails offer versatility, expecially if you live in newly developed areas where shade is a rarity. Shade Sails can be mounted almost anywhere. Coolaroo ® Shade Sails are available in a 16'5" triangle. ... Read more

Features

• 16' 5" Triangle - Desert Sand
• Mounting hardware is included
• Easy to install
• Cheaper than most awnings
• UV Protection

Product Description

Model No. PC-345. Large molded top with compartments for convenient storage of small parts and cord wrap. Wrap-around bumper provides protection for other surfaces in work shop. Pegboard sides with four hooks for hanging tools. 4" x 2" Casters provide easy maneuvering over rough surfaces. External lock bar and keyed lock provide visible security. 33.7"W x 19.7"D x 34.3"H. ... Read more

Features

• 4 x 2-inch casters allow easy maneuvering
• Large molded top with compartments for convenient storage of small parts and cord wrap
• Wrap around bumper provides protection for other surfaces in work shop
• Five full-width drawers with smooth-action full-extension drawer slides for assorted organizational needs
• Pegboard sides with four hooks for hanging tools

Product Description

These industrial strength A.L.C.s from Akro-Mils form a versatile, economical system for order picking, distributionor storage. Injection molded from high density polyethylene. Containers are completely modular and stack one on top of the other. Lids are attached so they can never be out of reach. Available in three different sizes. Nest for compact storage when they are not in use. Ergonomically designed, molded in handle grips. Anti-jamming ribs. Padlock eyes for security. Full length stainless steel hinge pins for durability. Textured bottoms increase container conveyability. Gray color. ... Read more

Features

• Height: 17.
• Length (inch): 21-1/2.
• Capacity in Cubic Feet: 2.28.
• Width (inch): 15.