Features

• DC410-6,500 RPM, 5/8"-11 spindle, ball bearing construction
• Type 1 (cut-off) and Type 27 (offset center) guards included
• DC988-DEWALT built motor for 500 in-lbs of maximun torque
• XRP Extended run-time batteries for long run-time and life
• DC988 - Patented 3-speed transmission: 0-450/0-1,450/0-2,000

Reviews (1)

Good Combo Hammer Drill and Cutoff Tool
I bought this kit mainly for the cutoff grinder tool.I have been using the cutoff tool as a grinder and it works great.This is for a field application were I needed cordless and this has lived up to my expectations.The battery life is good, the wieght and feel of the tool is great, and it is easy to use. Power for a cordless 4 1/2" grinder is excellent, you can lean pretty hard on it before it stalls, but remember it is cordless.The drill works well however I havn't used it enough to comment.Dewalt cordless tools are not cheap, however a good value. The reason for 4 not 5 stars is I want to see how long it lasts. ... Read more

Features

• Double insulated
• 2 amp motor
• 25,000 RPM
• All ball and needle construction
• 1/4" collect capacity

Reviews (4)

Best tool in my commercial sculpture shop!
I have, and am still using, the first unit I bought six years ago. I have a professional wood sculpture business, and have run this grinder hundreds of hours with carbide shaping tools on hardwood. Mostly walnut and birch. I bought a second unit that is setting in a drawer in case this one ever quits, but it isn't going to be soon. The one problem is that the slide switch gathers dust, and now it takes an extra push to get it going. It doesn't ever stop once running. If I dig the dust out of the switch it is fine. Other than that one thing, the heavy bearings, the good case, and strong motor, make this a wonderful tool. WAY better than any tools in my shop by Delta and Sears.

"SIMPLY THE BEST", "A TRUE WORKHORSE"
I have been doing flowbench developed porting for over 22 years. Sometimes my porting bench runs 12 hours a day. I own (in use at this site) more than 8 air die grinders, 8 hand held electrics(makita!), and 2 remote cable driven units. Years ago (1982) I was looking for an affordable electric die grinder, I tried several $80 - $100 units NONE LASTED more than a few days! EXCEPT THE MAKITA YOU SEE HERE! I still have the first 2 I bought, DATED 1982, until a few weeks ago only brushes and a switch had ever been replaced!! These 2 have THOUSANDS of hours use. Finally I had to replace a shaft in 1!! A true industrial quality tool @ a hobby price! Ken

MAKITA DIE GRINDER FOR WOODWORKING
I BOUGHT MY GRINDER TO USE ON MY WOODWORKING WORKING PROJECTS. I WAS IMPRESSED BY ITS LIGHTWEIGHT AND THE ABILITY TO HOLD IT IN MY HAND WHILE USING IT ON MY WOOD PROJECTS. I NEEDED SOMETHING THAT COULD HOLD METAL BURRS FOR RAPID REMOVAL OF WOOD AND THIS PRODUCT HAS DONE REALLY WELL. I ALSO WENT OUT AND BOUGHT THE 1/8 INCH SIZE COLLET SO I COULD USE MY 1/8 INCH BURRS. OVERALL I HAVE USED THIS FOR 3 YEARS AND NUMEROUS OF PROJECTS. I INTENDED TO BY A FOREDOM CARVING TOOL, BUT THIS SEEMED MORE PORTABLE AND MORE PRACTICAL USES AROUND THE SHOP. I GUESS MY ONLY COMPLAINT IS THAT SOMETIMES THE SPEED IS TOO HIGH AND I WISH THEY HAD ANOTHER SETTING AT 10,000 RPM's INSTEAD OF 25,000, IT TENDS TO BURN THE WOOD WHEN I HAVE ON A SANDING SLEEVE. EVENTUALLY THE MOTOR WILL BURN OUT BECAUSE OF THE WORK I PUT IT THROUGH BUT 3 YEARS LATER, IT STILL RUNS FINE. SO I RECOMMEND THIS PRODUCT BECAUSE OF ITS MANY PRACTICAL USES. I HAVE USED THIS ON WOOD SCULPTURES, STONE, AND METAL. THERE ARE MANY TYPES OF CUTTING AND SANDING ATTACHMENTS YOU CAN USE WITH THIS GRINDER, JUST BE SURE TO WEAR EYE PROTECTION!

Performance
The Makita GE0600 Die Grinder is the best performing grinder for the money on the market today. Have had this tool for over one year and have put it through its paces. It is of a comfortable size and is powerful enough to handle the most demanding tasks. Davis Woodworking Inc. ... Read more

Features

• 1/4" air inlet; 3 CFM air consumption
• Ball bearing construction for longer tool life
• Self-locking throttle lever
• Positive grip 1/4" capacity collet chuck
• 1/3 HP motor delivers 25,000 RPM's

Product Description

Designed for quick cutting and light grinding, in tight spaces and areas where power is not available. The DC410KA 4-1/2-inch cut-off tool just made cutting easier and more convenient. Powered by DeWalt's 18-volt system, this tool allows users to expand t ... Read more

Features

• 6,500 rpm provides high power for cutting and grinding applications
• Convenient trigger switch with lock-off button for easier gripping
• Metal gear case dissipates heat for longer bearing, gear and motor life.
• 3 Position side handle offers greater c

Features

• One year warranty, one year service contract, 30 day no-risk trial
• 120-Volt AC/DC capacity works off welding machines and generators for increased productivity and versatility
• Convenient paddle switch with lock-on button for easy gripping
• Includes two wrenches, 1/8-inch collet and 1/4-inch collet
• 1/8 or 1/4-inch collet, tool weight: 3.25 lbs

Product Description

Part of an expanded line of economical, standard duty grinders, the IR 301 packs valuable features into a compact package. Use it for grinding, edge-breaking, deburring, porting, and polishing. Wherever space is tight, its right-angle configuration provides easy access. Compact, lightweight, east to handle Self locking throttle Ball bearing construction for durability Precision machined gearing delivers maximum power transferSpecifications:Free speed: 20,000 rpmWeight: .99 lb. (.45 kg)Length: 5" (127 mm)Average air consumption: 3 cfm, @ load 14 cfmSound (pressure/power): 90/103 dBARated power: .25 hpCollet size: 1/4"Air inlet: 1/4" ... Read more

Features

• Durable ball bearing construction with precision-machinedsteel gears
• Self-locking throttle lever
• Compact, lightweight, easy to handle
• .25 HP motor delivers 20,000 RPM's
• 1/4" air inlet; 3 CFM air consumption

Features

• Made In USA
• Quick Change Collet Nut
• Customized Storage Case
• 30 Assorted Accessories
• 175+ Uses Book

Reviews (4)

Great product but not a great value.
This is a great product that will save the owner much time. It is a must have for anyone that does home/auto repair. I was trying to remove a rusted nut when I bought this product. I had it off in seconds. I can't say enough on how useful this tool is. I gave it only 3 stars because the Dremel 3956 or 3962 are a better value. Both the 3956 and 3962 have a variable speed Dremel instead of just a 2 speed Dremel and the 3956 includes the flexable shaft. The price to go from the 2850D to the 3956 is about $10 and the 3962 less than the 2850D. Still you can't go wrong on any of the Dremels.

One of the most usefull tools in my shop
This purchase was my first Dremel tool. I've used it to sand, grind, cut and fabricate small pieces or to modify larger pieces. You can do almost anything with one of these things. And with all of the new attachments they are coming out with....it just gets better....buy one...seriously... you wont regret it.

A life saver and a staple in any tool collection
This is a tool that you can't appreciate until you buy it and allow it to "save the day" time after time. Since I purchased this kit I have taken on jobs where I would never have imagined this tool finding an application, and without fail, before the project is finished, I find that I not only put it to use but I would have been stuck at a dead end were it not for this kit. Buy it and let it prove itself you wont be sorry.

Perfect Tool
I've used this tool mainly for metal works. It's good for those detail works some people face. It's a slow job working with metal but if you have patience it's accomplish what you're working on. I recommend this for anyone. I haven't worked on other material such as plastic but should be easy enough with this tool. ... Read more

Features

• Ball Bearings sealed in iron bushing for extended life
• IDI Technolgy
• 9" Wheels
• 15 Amps and 3,500 Watts of output power
• Dust Proof lbyrinth construction

Product Description

2" Diameter 4.5 Amp Model 5192 21,000 RPM. For mounted wheels and points up to 1-5/8" reinforced wheels up to 2". ON/OFF toggle switch. ... Read more

Features

• Length (inch): 13-1/2.
• Net Weight: 4-1/2.
• Collet Size (inch): 1/8+ - 1/4++.
• Amps: 4.5.

Features

• Overall Length: 10-3/4".
• Overall Length (inch): 10-3/4.
• Net Weight: 1.52.
• Free Speed RPM: 20,000.
• Air Consumption Idle CFM (L/S): 4.0 CFM.

Features

• Lightweight for controlled grinding operations
• High speed (25,000 RPM) for maximum production
• Accepts metal cutters and burrs for production work
• 1/4in. collet capacity
• All ball-bearing construction for long life

Features

• Easy to install and adjust tool-free guard
• 8.5 Amp 11,000 RPM Motor
• Epoxy coated field winding
• Sealed switch
• Ergonomical paddle switch with Lock-On button

Features

• SJS Super Joint System absorbs shocks caused by accidental wheel lock during operation to protect gear, collet and coupling for longer tool life
• Electronic speed control maintains constant speed under load
• Slender double-neck die cast aluminum gear housing for easy handling
• Internal labyrinth construction protects bearings and motor from dust and debris for long tool life
• Speed control dial for setting the optimal speed for various materials

Features

• 3.0 amp motor
• Heavy duty (30,000 RPM) for fast and efficient grinding
• All ball bearing construction for long tool life
• Sturdy aluminum housing for durability
• Slim-line design for easy handling

Product Description

Micro-sized grinder does precision, detailed work, FAST! Only 6 1/8in. long. Collet takes accessories with up to 1/8in. shaft. Delivers 56,000 RPM free speed at 90 PSI. Aluminum alloy housing. Grinder has 1/4in. NPT air inlet. Air hose included. One year limited warranty. ... Read more

Features

• Exhaust diffuser for quiet operation
• 25,000 rpm
• Patented ergonomic body with thermal insulator for continuous use
• Ideal for use on a variety of materials including wood, metal, plastic, ceramic, cast iron
• Lightweight engineered composite housing

Product Description

Milwaukee 5194 Grinding in tight places around irregular surfaces is the specialty of this Milwaukee Die Grinder. The 5194 comes with a 1/4 inch collet but will accept 1/8 inch collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 21,000 RPM with an 4.5 amp motor, this tool means business. A maximum 2 inch reinforced or 1-5/8 inch non-reinforced wheel can be attached to this versatile grinder for deburring and shaping. Paddle switch operated with body grip control.. 1/4 inch collet 48-66-0975, 11/16 inch open end wrench 49-96-4090, 1/2 inch open end wrench 49-96-4040 ... Read more

Features

• 4.5 amp, 21,000 rpm
• For mounted wheels and points up to 1-5/8 in., reinforced wheels up to 2 in.
• 1/4 in. collet standard equipment, 1/8 in. collet available
• All ball and roller bearings

Features

• Ideal for a variety of uses, including grinding, edge breaking, deburring, porting and polishing
• Operates at up to 20,000 RPM
• Self-locking throttle prevents accidental starts
• Smooth running, long life ball bearings
• Kit includes 10 various shaped grinding stones, 5 with 1/4in. mandrel, 5 with 1/8in. mandrel

Features

• Both cut-off tool and right angle die grinder have 20,000 RPM free speed
• Includes 2 discs, 5 grinding stones, 5 buffers and 3 collet wrenches
• Cut-off tool requires 90 PSI @ 4 CFM; grinder 90 PSI @ 3 CFM
• 1/4in. NPT air inlet; storage case

Features

• 3 CFM average air consumption
• 20 CFM @ load
• 25,000 RPM @ 90 PSI
• 1/4 in. collet
• 1/4in. inlet, 3/8 in. minimum hose size