Amazon.com

A simple idea becomes a great product. Fill up four of these babies with your fasteners, hardware, fittings, whatever, and you’ve got everything you need right at hand without fumbling through bags or fooling around with flimsy cardboard boxes. The compartments are generous, the plastic is rugged, and all you need is a five-gallon bucket for complete portability. If you’ve used the original Bucket Stackers, you’ll love these, because they’re toting 44% more capacity than the yellow version. Some nifty little extras include built-in drill-bit sizers, pencil holders and measuring rule. Sure, they were made with contractors in mind, but we think they’ll find their way into your house, too, for crafter’s supplies and household thingamajigs.--Kris Jensen-Van Heste ... Read more

Features

• Made in USA
• 4-pack of super bucket stackers
• Organize bolts, screws, wire nuts, etc.
• Fits standard 5-gallon bucket
• Red in color

Reviews (3)

Lots of screws
Great set of stackers!! Compartments are big enough to hold a 1# box of drywall screws. I use one for nails, one for screws, and one for electrical fittings.. Haven't found a use for the 4th one yet.. I had a chance to check out the smaller ones (Yellow) (when they were sent to me by mistake) and I HIGHLY recommend going with the larger ones (Red).. I'd rather have a stacker only filled 3/4 full of screws than to have a smaller one overflowing.. Just waiting for Bucket Boss to make a Stacker Lock that secures to a stepladder tray so you can't inadvertantly knock it off the ladder..

Let's talk increased productivity.
When I'm on a job, I can need 15 different types of nails and screws-easy. I used to keep them in the lumberyard bags stashed in a 5 gallon bucket. Now let see where is that bag with the 3d finish nails? I know it's in here somewhere. Right, usually the last bag I'd look in. I bought two sets of the stackers-one for screws and one for nails, and those unproductive search minutes have become a thing of the past. My only complaint is sometimes a lower stackers will come out with the upper one and then fall off, spilling its contents. Aw, quit your belly achin'.

Bigger helper
I love these things. They work so well with the standard sized stackers that I think they should be mandatory for contractors. One or two of these things in the bottom of each bucket, with a standard size or two on top, makes a great combo for holding those larger sized, fasteners, or that larger quantity you want to carry. I use these stackers to hold what I want to carry from the bucket to my location, or just to tote around from place to place on the site. They're stable, strong, and work great. ... Read more

Product Description

Keep tools and parts handy with this Tool and Parts Dolly. It features adjustable height, padded tray liners and 2" rolling casters. ... Read more

Features

• Made in USA
• 4 compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4-5 deep in any 5 gallon bucket
• 4 piece kit

Reviews (2)

Let's Get Organized !!
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

I do have to watch the amount of hardware I put in the containers. Too much weight tends to make them a little "too flexible" and difficult to handle.

A great "investment" and time saver for me.

smart idea
Each time I need to set up a new truck or trailer I put together 3 of these sets. 1 for fastners, 1 for electrical, and 1 for plumbing. They keep the truck well organized and save me the lost time of having a man run to the hardware store for a few inserts. They are one of the best ways I have of keeping supplies on hand. If I could change anything about the tray it would be to have a tray divided into 6 sections for smaller parts. ... Read more

Features

• Made in USA
• 44% more capacity than traditional Bucket Stacker
• Organize washers, wire nuts, bolts, etc
• Fits in standard 5 gallon bucket
• Includes a drill bit sizer, pencil holder, and measuring rule

Reviews (1)

Great Organization
This "Super Stacker" container is a little larger than its yellow cousin. The four compartments has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

However, I do have to watch the weight of the items in the compartments. It is very easy to overload the entire bucket when you put several of these together.

When I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me. ... Read more

Product Description

This combination makes for the ultimate cart. The locking drawer and locking top are keyed the same so the user only has one set of keys. Friction slides on drawer. Load capacity 350 lbs. Large easy to maneuver 4. ... Read more

Features

• Two removable dividers for organizing larger parts
• Clear lid for viewing contents
• Lid securely snaps closed
• Fits any standard 5-gallon bucket

Reviews (4)

Not for Manly Tool Stuff ONLY!
OK, I bought several of these Bucket Boss Bucket Seat Pros for the USUAL uses - lids with convenient hardware / small tool storage. And the seat works GREAT for it's intended purposes! My wife came up with the idea (after thoroughly washing, of course) to use the seat to put vegatables and dip in. She uses a 5 gal bucket as a picnic basket, filled with ice, soda, food and enough room for plastic plates and utensils, paper napkins in a plastic baggie, etc. We're all set!
The possibilities for the complete Bucket Boss line are endless!!!

Good organizer & seat but not built well
I found the Bucket Seat Pro to be a great idea. Great storage for small parts and tools but the seat broke at the hinge. The design creates a stress spot at the hinge that isn't strong enough to hold your weight. Too bad, it was great while it lasted (one year).

bucket boss seat-lid
Very nice for storage of any type of small parts, examples-soliderless terminals, bx/romex conn., wire nuts, wire staples, plug fuses, ect. You can also stand on the top of it to use buckett with lid as a short ladder or stepping stool; and aaa yes, as for those of you who can sit on the job, a nice seat.

It Does the Job
Okay, it's only a seat, but it's a nice seat. It fits snuggly on the bucket, creating a tight fit, but not a water-tight fit. The seat itself has a flip-up lid which reveals 6 compartments for the really small items, or just to keep a few on top, easy to get at without opening the entire bucket.

One of the uses is for camping and fishing. Makes a nice, easy to carry seat that is functional and light to carry. The compartment on top of the seat holds matches, hooks, needlenose plyers and whatever else is quickly needed.

A real nice complement to the BucketBoss System. ... Read more

Product Description

Incredibly versatile bins tilt-out at a 45 angle allowing easy access. Easy identification of parts. Compliments your small parts storage systems. ... Read more

Features

• White
• 5 1/4in. x 23 5/8in. x 6 1/2in.

Features

• Made in USA
• Four compartments for organizing nuts, bolts, screws, nails and more
• Includes a drill bit sizer, pencil holder, and measuring rule
• Stacks 4 to 5 deep in any 5 gallon bucket
• High visibility yellow

Reviews (3)

It's Organization
This set of four stacker system, with four compartments each, has greatly aided me in trying to keep my shop organized with the various screws, nails and brads that I use in my craft business. Each compartment is labeled and I know that the exact item that I am looking for is in the "screw" bucket. It has eliminated the boxes of stuff from piling up on the workbench.

Better yet, when I go off to a craft show, I just take the bucket with me, and I know I have everything in hand that I could possibly need. Plus, when the supply of a compartment gets low, I know it is time to fill it up, rather than hunt through the various boxes on the work bench hoping that I have more.

A great "investment" and time saver for me.

Ingenious pieces of plastic
Although I am not too fond of the price that Bucket Boss is getting for these handy trays, I own about half a dozen of them. That's because they work so well!

The other reviewer pointed out the weight problem when over loaded. This is very true.

My buckets usually sit in my storage building full to the brim with assorted yet sorted fasteners. I can find what I am looking for rapidly by just lifting the stacking trays one at a time and giving a quick glance.

Very good system, just be careful
These plastic trays are very durable, and downright ingenious. The only thing is that if you get a whole bucket filled with trays, and all the trays filled with screws, nails, bolts, etc; the bucket will be incredibly heavy for the average person. If it is to stay stationary in your shop or garage, it is the perfect thing for you. If you plan on adding the other outside bucket tool organizer, and filling it with tools, with the full trays inside, and are going to work out of it, plan on one heck of a load to haul. Just consider this before you go off and make a purchase. Other than that, bucket trays will provide years of durable service, and save hours of time in some cases in looking for the perfect fastener, or craft item (yes, the whole family can use them for many purposes). ... Read more

Product Description

Stainless steel tray. 4 Heavy-duty rubber covered magnets that will not scratch metal. Tray is fully magnetized to hold long bolts, tools etc.. Giant size: 11-1/2" L x 11" W. Tools/parts not included. ... Read more

Features

• Length (inch): 11-1/2.
• Width (inch): 11.

Product Description

Two different styles perfect for the storage of components in a small amount of space. Full 360deg rotation allows easy access. Table top model has four 17 1/2" diameter shelves with four compartments on each shelf and is 18" tall. The floor model also has four shelves, 19 3/4" in diameter, with 6 compartments per shelf and is 37 1/2" tall. Four swivel casters make it easy to maneuver the parts storage right next to the job to be done. ... Read more

Product Description

Always have your Nuts & Bolts organized in one easy to move around bucket. Great Quality at a LOW, LOW PRICE !! Makes a great GIFT ! ... Read more

Features

• Four compartments for organizing nails, nuts and much more.
• Includes a drill bit sizer, pencil holder and 4" measuring rule.

Product Description

Mounts on wall, workbench, or perforated board. Mounting holes placed 16" on center. ... Read more

Features

• Organizes over sixty tools in one rack
• Mounts on wall, workbench, or perforated board.
• Mounting holes placed 16" on center.
• Perfect for smaller hand tools such as screw drivers, small wrenches, and pliers.
• That little extra space allows you to put bigger items in the tool box.

Product Description

Makes item selection EASY. Each 17in. diameter tray has 4 sections and holds up to 100 pounds of bolts, nuts, parts and more. 18in. high overall. 3in. between trays. Rolled, label-holder edges. ... Read more

Features

• Constructed of Plastic

Reviews (1)

Plastic Not Steel
Buyer beware, the name of this product is Steel Revolving Bin, but it's made from cheap plastic. I doubt that it will hold the advertised 400 lbs. ... Read more

Product Description

Heavy gauge, stainless steel construction with smooth rolled edges. Keeps small steel parts, tools, screws, needles, and bolts where you put them when working on a job or project. Bright polished stainless steel dish is easy to clean. ... Read more

Features

• 6" diameter, 1 1/8" depth

Product Description

Keeps small parts hardware and tools in place Can be used in any position, right-side-up or upside-down 6" diameter dish 1-1/8" deep Stainless steel Weight: .86 lbs. ... Read more

Product Description

A new storage Bucket Seat with six compartments and two removable dividers to organize small parts. ... Read more

Features

• Two removable dividers for organizing larger parts
• Clear lid for viewing contents
• Lid securely snaps closed
• Fits any standard 5-gallon bucket

Product Description

Incredibly versatile bins tilt-out at a 45° angle allowing easy access. Easy identification of parts. Complements your small parts storage system. U.S.A. ... Read more

Features

• 2 1/2in. x 23 5/8in. x 3in.
• Pre Drilled Holes for Easy Mounting
• Bin Dimensions: 1 3/4in.D x 2 3/16in.W x 2 1.2in.H

Product Description

Dividers for heavy duty stacking bins #17805, #178050. 24-pack. ... Read more

Product Description

Versatile storage for parts and tools Conveniently holds nuts, bolt screws, etc. Great for sockets, vise grips, pliers, etc. Fits tool boxes, shelves and work benches Stackable design ... Read more

Product Description

Versatile storage for parts and tools Conveniently holds nuts, bolt screws, etc. Great for sockets, vise grips, pliers, etc. Fits tool boxes, shelves and work benches Stackable design ... Read more