Product Description

OTC Bronze Center Bushing Service Set. Saves hours replacing bronze center bushings on Hendrickson 500 and 700 suspensions. Use with a 100-ton capacity shop press. Set includes: A: Installing adapter; B: Removing adapter. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC Bronze Center Bushing Service Set. Designed for replacing bronze center bushings on 340, 380, 440 and 460 Hendrickson suspensions. Also installs bronze center bushing grease seals. For use with OTC1740 (available separately). Set includes: A: Installing adapter; B: Installing adapter; C: Removing/installing adapter; D: Removing/installing adapter. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC Center & End Bushing Service Set. This set is required for bushing service on 500 and 700 series heavy-duty suspensions. It is intended for use with a 100-ton capacity shop press. It allows replacement of center and end bushings. Set includes: A: Adapter; B: Adapter clamp; C: Adapter. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC Center and End Bushing Tool Set. This set is the answer for replacing center and end bushings on Hendrickson 340 and 380/440 series suspensions. For use with a 100-ton or larger hydraulic press. The press plate sits on the press bolster to provide a level, cradle-like surface for the beam to rest on during pressing. Set includes: A: Press plate; B: Removing adapter; C: Installing adapter; D: Removing adapter; E: Inst. adapter clamp; F: Clamp plate; G: Press adapter; H: Removing adapter; I: Installing adapter. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. FREE ground shipping to any location in the continental USA. ... Read more

Product Description

OTC End Bushing Adapter Puller Set. Set contains everything needed to remove end bushing adapter plugs in 380 thru 440 series suspensions. The plugs have to be removed prior to end bushing replacement. The set is complete in a handy plastic case. For use with OTC1740 Basic Tooling Set. Set includes: A: Spacers (3); B: Screw (7/8"-14); C: Screw (15/16"-12); D: Screw; E: Plug gauge; F: Hand tap (7/8"-14); G: Hand tap (15/16"-12); H: Nut assembly; I: Receiving cup. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC End Bushing Adapter Puller Set for Hendrickson. This set contains everything needed to remove end bushing adapter plugs used on 400 series and the larger 460-520 series suspensions. The plugs have to be removed prior to end bushing replacement. The set comes complete with a handy plastic case. For use with OTC1740 Basic Tooling Set. Set includes: A: Spacers (3); B: Screw (7/8"-14); C: Screw (15/16"-12); D: Screw; E: Plug gauge; F: Hand tap (7/8"-14); G: Hand tap (15/16"-12); H: Nut assembly; I: Receiving cup; J: Hand tap (M30 x 2); K: Screw (M30 x 2). Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. FREE ground shipping to any location in the continental USA. ... Read more

Product Description

OTC End Bushing Hanger Tube / RU Series Center Bushing Service Set. Required for servicing RU340 series center bushings. The long puller screw is used to remove the beam cross tube. This set also removes end bushing hanger tube assemblies. For use with OTC1740 (available separately). Set includes: A: Nut; B: Removing adapter; C: Receiving adapter; D: Special screw; E: Pulling screw. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC Flow Tester Calibrator. Calibrator confirms 75 GPM tester meter readings. The calibrator simply plugs into the CAL jack on tester panel to confirm the accuracy of the flow meter settings. Tester is powered by its own internal battery. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC Hendrickson Bar Pin Adapter Set. The bar pin end bushings used on Hendrickson equalizing beam tandem truck suspensions require the use of this tooling for service. This set is used with the beam removed from the vehicle, and in conjunction with the OTC51100 press plate and a 100-ton hydraulic shop press. The bushing is installed correctly, using procedures recommended by the suspension manufacturer. To remove bushings, use removing adapter (OTC302030) and press adapter (OTC206457), both of which must be ordered separately. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

OTC R400 Center Bushing Adapter Set. Used with OTC1740 basic tooling set, these adapters let you remove and install the new style R400 center bushings on Hendrickson suspensions. Set includes one OTC310248 removing adapter and one OTC310249 installing adapter. For R400 series Hendrickson suspensions having center bushing No. 49400 or field service center bushing No. 49600. Availability: Drop ship from factory. Usually ships within 1-2 weeks. Ships via UPS. ... Read more

Product Description

Vertical two-stud turn signal includes side marker light with reflector. Vibar socket utilizes wedge-base, two-filament bulb. Unique weather-proof plug-in harness provides for universal mount. Limited lifetime warranty. ... Read more

Product Description

The Stepper gives you safe and secure footing while you work on truck and bus engines. This convenient tool goes over the front or rear tire of the vehicle to give you easier access to hard-to-reach places. It's adjustable for most tire sizes and folds flat for convenient transport and storage. Keep one ready to use in all your fleet vehicles. Lightweight steel construction. Non-slip OSHA approved surface. Availability: Drop ship from factory. Usually ships within 2-3 days. Ships via UPS. ... Read more

Product Description

Segway of Oakland's SegShop is proud to bring you the Segway of Oakland Trailer. The Segway of Oakland Trailer truly Revolutionizes the Segway Expierience. Imagine Taking a Segway ride to a baseball game and having lunch with you. The SegShop only brings you the highest quality products and the Segway of Oakland Trailer is awesome! It can carry up to 180 Pounds and uses the Segway of Oakland Dual Swivel System. The Dual Swivel System is designed to allow the rider to ride a Segway like normal and not affect the trailer and vice versa. You can turn up to 90 degress and not Jacknife!! The trailer is made out of Aluminum Diamond Plating, and is made with advanced skill. The segway of Oakland Trailer is the Ultimate in Human-Cargo Transportation. The Trailer comes with the trailer hitch and everything needed to install. Brought to you by Segway of Oakland only bringing you the Best in high quality after market Segway Ht accessories. ... Read more

Features

• Segway of Oakland Dual Swivel System
• Carries up to 180 Pounds
• Great Craftsmanship
• Brought to you by Segway of Oakland

Product Description

Designed specifically for farm use only. Hauls gravel, fertilizer, leaves and more. Removable tailgate for easy loading and unloading. Overall size: 62in. L x 33in. W x 30in. H. ... Read more

Features

• Bed Dimensions: 40 1/2in. x 32 1/2in.
• 9.89 Cu ft.
• Width of Wheel Track: Axle is 33in.L and wheels are 3 1/2in.W
• Tire Size: 16in. x 3in. Pneumatic with 5/8in. Sleeve Bushing

Product Description

Hauls dirt, rock, wood, small livestock and more across the toughest terrain. Has all-steel frame, wide-track tires, bearing hubs with grease fittings, and exclusive tilt and pivot trailer bed for easy loading and unloading. Body is high-impact polyethylene. Great for farm chores, hunting or working around the yard. Has pin attachment style hitch. Wheels trail in the track of your ATV. Hauling capacity of 19 cu. ft. with a 1500-lb. load capacity. 3-year limited warranty. Truck shipped. U.S.A. ... Read more

Product Description

4-wheeled dolly makes hand transporting of loaded trailers a breeze. Ideal for pushing or pulling trailers into tight storage areas. Dolly has two bicycle-type grips and a long rectangular tube handle for leverage on tongue weights up to 300 lbs. Wheels are 7in. x 1 1/2in. 1 7/8in. hitchball. ... Read more

Features

• Height from floor to top of ball mount: 15in.
• Length of bar: 48in.
• Width of wheel base: 22 1/2in.
• Height from ground to handle when dolly is resting: 13 3/4in.

Product Description

Make your PTO generator portable! Pre-drilled holes allow NorthStar® generators #165929, #165937 or #165949 to mount easily. Tongue adjusts and pivots to fit most PTO generators sized 60 KW and lower. Trailer rolls easily over most surfaces on big 13in. pneumatic wheels. Includes storage area for PTO shaft and cords. Powder coat finish. 85 1/2in.L x 50in.W x 24 1/2in.H. Truck Ship. U.S.A. ... Read more