Product Description

Pulls up to 4000 lbs.; lifts up to 2000 lbs. Double-strength steel, dual drive hoist/puller has a 7 1/2-ft. reach. Steel stop levers and ratchet wheel. Equipped with 3/16in. aircraft cable and 5/16in. alloy hooks. U.S.A. ... Read more

Features

• Designed for winches up to 4000-lb. capacity
• Accepts up to 7/32in. diameter cable
• 5600-pound pulling capacity
• Diameter of Pulley: 2 1/4in.
• Width: 7/16in.

Product Description

Flexible strapping material conforms to and controls the load, one piece aluminum alloy ratchet wheel is wear resistant and stronger than laminated wheels, high strength electro-plated steel parts are rugged and virtually indestructible, "notch-at-a-time" letdown for trouble free positive control during lowering, drop forged steel slip hooks for maximum strength rotates a full 360ø, non-slip plastic grip is comfortable to use and reduces hand fatigue. Max Lift 10' Suggested for truck cargo control, vehicle recovery/rescue, auto tie down, and animal loading assistance. ... Read more

Features

• Flexible strapping material conforms to and controls the load - non-conductive properties
• Precision-cast aluminum alloy ratchet wheel - one piece construction
• Interlocking, precision fit, steel alloy pawls with safety spacer sleeve
• Cold-rolled, high strength, tempered steel frame and handle
• Drop-forged steel slip hooks with OSHA recommended safety latches

Product Description

3/4 Ton Pow'R Rope Puller, 20' Rope, Precision Cast Aluminum Alloy Ratchet Wheel, 1 Piece Construction, Galvanized, Aircraft Quality Cable, Interlocking, Precision Fit, Steel Alloy Pawls With Safety Spacer Sleeve, Cold Rolled, High Strength, Tempered Steel Frame & Handle, Drop Forged Steel Slip Hooks With OSHA Recommended Safety Latches, Heavy Gauge Steel, Reinforced Ratchet Guard, Aircraft-Type, Heat Treated Bolts, High Tensile, Fully Rotating Steel Swivel, Trouble Free, "Notch-At-A-Time" Letdown, Permanent, Comfortable, Non-Slip Grip, Includes 20" Of 1/2" Wear Resistant Dacron Polyester Rope, Twisted Or Braided, Rope Pullers Can Accommodate An Unlimited Length Of Rope. ... Read more

Features

• /4 Ton Pow'R Rope Puller, 20' Rope, Made In The USA
• Precision Cast Aluminum Alloy Ratchet Wheel, 1 Piece Construction, Galvanized
• Steel Alloy Pawls With Safety Spacer Sleeve, Cold Rolled, High Strength
• Heavy Gauge Steel, Reinforced Ratchet Guard, Aircraft-Type, Heat Treated Bolts
• Includes 20" Of 1/2" Wear Resistant Dacron Polyester Rope, Twisted Or Braided

Product Description

Pow'R-Pull, 3 Ton Professional Grade Cable Puller, 12' Lift, 1 Piece Aluminum Alloy Ratchet Wheel, High Strength, Electro-Plated Steel Parts, Galvanized 5/16" Aircraft Cable, Notch At A Time Let Down, Drop Forged Steel Slip Hooks, Permanent, Non-Slip Plastic Grip & Compound Leverage. ... Read more

Features

• Pow'R-Pull, 3 Ton Professional Grade Cable Puller, 12' Lift
• 1 Piece Aluminum Alloy Ratchet Wheel, High Strength, Electro-Plated Steel Parts
• Galvanized 5/16" Aircraft Cable, Notch At A Time Let Down, Drop Forged Steel Slip Hooks
• Permanent, Non-Slip Plastic Grip & Compound Leverage
• Made In The USA

Product Description

Four-inch heavy-duty galvanized steel garage door pulley assembly with fork (straps), axle bolts and nuts. Heavy-duty construction with case hardened steel race and steel ball bearings. ... Read more

Features

• 4 inch heavy-duty galvanized steel garage door pulley assembly.
• Includes fork (straps), axle bolts and nuts.
• Heavy-duty construction with case hardened steel race and steel ball bearings.
• For residential extension springs and doors.

Product Description

Four Inch Heavy-Duty Galvanized Steel Garage Door Pulley ... Read more

Features

• 4 inch heavy-duty galvanized steel pulley used at stationary or spring positions.
• Factory lubricated.

Product Description

4 inch heavy-duty galvanized steel garage door studded pulley. ... Read more

Features

• 4 inch heavy-duty galvanized steel garage door studded pulley.
• Used at stationary or spring positions.
• Factory lubricated.

Features

• For winches of 8000-pound capacity
• 9800-pound pulling capacity
• Accepts up to 5/16in. diameter cable
• Body length: 6in.
• Body width: 4in.

Product Description

Pow'R-Pull, 4 Ton Professional Grade Cable Puller, 6' Lift, 1 Piece Aluminum Alloy Ratchet Wheel, High Strength, Electro-Plated Steel Parts, Galvanized 5/16" Aircraft Cable, Notch At A Time Let Down, Drop Forged Steel Slip Hooks, Permanent, Non-Slip Plastic Grip & Compound Leverage. ... Read more

Features

• Pow'R-Pull, 4 Ton Professional Grade Cable Puller
• 6' Lift, 1 Piece Aluminum Alloy Ratchet Wheel, High Strength
• Electro-Plated Steel Parts, Galvanized 5/16" Aircraft Cable
• Notch At A Time Let Down, Drop Forged Steel Slip Hooks
• Permanent, Non-Slip Plastic Grip & Compound Leverage, Made In The USA.

Product Description

Five Inch Heavy-Duty Galvanized Steel Garage Door Pully Assembly with Fork (Strap) and Axle Bolts ... Read more

Features

• 5 inch heavy-duty galvanized steel garage door pulley assembly.
• Includes fork (straps), axle bolts and nuts.
• Heavy-duty construction with case hardened steel race and steel ball bearings.
• For residential extension springs and doors.

Product Description

Five-inch heavy-duty galvanized steel garage door studded pulley. ... Read more

Features

• 5 inch heavy-duty galvanized steel garage door studded pulley.
• Used at stationary or spring positions.
• Factory lubricated.

Product Description

Zinc coated pulley block accepts 1/4 in. diameter cable. ... Read more

Features

• Solid carbon steel gears and embossed frames for additional strength
• Baked black enamel finish
• Include grip handles and cable keepers
• Brake is ratchet with pawl type
• Winch drums are drilled to allow use of straps

Product Description

Use it anywhere winch cable changes direction. Steel sheave is 1 7/64 in. wide with bronze bushing. Ideal replacement for wrecker boom sheave. ... Read more

Product Description

Dependability and long lasting are the best ways to describe the Pierce Electric Winch. Being based on a time-tested design, the Pierce Electric Winch incorporates the use of a final worm drive to improve upon power and efficiency. This system, as well as additional input gear reduction, has self-holding characteristics that eliminate the need for costly and energy consuming braking mechanisms. The PS654-K models are rated at 9000 lbs., with a stall point of 11,500 lbs. (first cable wrap), with adequate power input. The final drive worm gear reduction has a 60/1 ratio with an overall ratio of 470/1, giving the winch a no-load line speed of 14 ft. per min. with full cable spool. All Pierce Electric Winches come complete with solenoid assemblies, and metal covers. The also include a 15 ft., Hand-held remote control providing both forward and reverse power at your fingertips. An internal clutch dog, controlled by an external lever, gives complete freewheeling of the cable drum for fast, energy efficient spool-off operations. A high gloss powder coat compliments each winch for a smooth and sophisticated finish. ... Read more

Features

• Integrated Worm Gear
• Self-holding characteristics replace costly brake
• 15 ft. Hand-held remote
• Internal Clutch Dog
• 8" Drum

Product Description

Dependability and long lasting are the best ways to describe the Pierce Electric Winch. Being based on a time-tested design, the Pierce Electric Winch incorporates the use of a final worm drive to improve upon power and efficiency. This system, as well as additional input gear reduction, has self-holding characteristics that eliminate the need for costly and energy consuming braking mechanisms. The PS654-K models are rated at 9000 lbs., with a stall point of 11,500 lbs. (first cable wrap), with adequate power input. The final drive worm gear reduction has a 60/1 ratio with an overall ratio of 470/1, giving the winch a no-load line speed of 14 ft. per min. with full cable spool. All Pierce Electric Winches come complete with solenoid assemblies, and metal covers. The also include a 15 ft., Hand-held remote control providing both forward and reverse power at your fingertips. An internal clutch dog, controlled by an external lever, gives complete freewheeling of the cable drum for fast, energy efficient spool-off operations. A high gloss powder coat compliments each winch for a smooth and sophisticated finish. ... Read more

Features

• Integrated Worm Gear
• Self-holding characteristics replace costly brake
• 15 ft. Hand-held remote
• Internal Clutch Dog
• 11" Drum

Product Description

This 1/2 ton capacity model is the smallest chain block offered by American Power Pull. With the power to lift 1000lbs., the 405 is perfect for most automotive lifting. Specifically heat treated to assure years of service. Thick steel construction prevents damage from impact and rough handling. Rated Capacity: 1/2 Ton Test Load: 3/4 Ton Standard Lift: 10 foot Chain diameter: 1/4" Pulling effort at load: 52 lbs. Net weight: 24.3 lbs. ... Read more

Product Description

With the power to lift 2000lbs., the American Power Pull 410 can handle all your automotive, industrial, and farm hoisting needs. Specifically heat treated to assure years of service. Thick steel construction prevents damage from impact and rough handling. Rated Capacity: 1 Ton Test Load: 1 1/2 Ton Standard Lift: 10 foot Chain diameter: 1/4" Pulling effort at load: 69 lbs. Net weight: 28.7 lbs. ... Read more

Product Description

American Power Pull Chain Pullers pull, lift, and drag with ease and speed. Specifications: Rated Capacity: 3/4 ton Tested Load: 1 1/8 ton Standard Lift: 5 feet Chain diameter: 1/4" Handle length: 11 3/16" Net weight: 17.7 lbs. ... Read more