Product Description

Perfect for grain augers, conveyors, boat lifts and more. Self-activating automatic brake makes these winches the ideal choice for use in any application where you need to prevent heavy loads from falling. Cable easily unreels if you continue cranking after load has been lowered. Comfort grip handle. Easy to crank at rated loads. Extra-large hub helps prevent cable damage. Zinc plated to resist corrosion. U.S.A. ... Read more

Features

• 1,500-lb maximum rated line pull winch
• 5.1:1 gear ratio.
• Double Disc automatic brake system
• Accepts up to 88 feet of 1/4in. steel cable
• Handwheel coupler

Product Description

CM series 622 hand chain hoist. This imported hoist is a simple efficient economical design. equipped with hardened load chain for flexibilty and long wear. This hoist has 1/2 ton capacity and 12 ft of lift chain.

Maximum Capacity: 1/2 Ton
Standard Lift: 8 Feet
Weight: 15 Lbs.
... Read more

Features

• Compact design, low headroom and lightweight for easy installation, even in confined spaces.
• Simple, efficient, economical design.

Product Description

CM series 622 hand chain hoist. This imported hoist is a simple efficient economical design. equipped with hardened load chain for flexibilty and long wear. This hoist has 1 ton capacity and 12 ft of lift chain.

Maximum Capacity: 1 Ton
Standard Lift: 8 Feet
Weight: 22 Lbs.
... Read more

Features

• Compact design, low headroom and lightweight for easy installation, even in confined spaces.
• Simple, efficient, economical design.

Product Description

CM series 622 hand chain hoist. This imported hoist is a simple efficient economical design. equipped with hardened load chain for flexibilty and long wear. This hoist has 2 ton capacity and 12 ft of lift chain.

Maximum Capacity: 2 Tons
Standard Lift: 8 Feet
Weight: 53 Lbs.
... Read more

Features

• Compact design, low headroom and lightweight for easy installation, even in confined spaces.
• Simple, efficient, economical design.

Product Description

CM series 637 short arm ratchet lever hoist. This imported hoist has a free wheeling chain for fast load attachment. It's features also include double reduction dual load sharing steel gears abd double pawl arrangement for optimum load control. This hoist is 3/4 ton capacity with 10 ft of load chain.

Capacity: 3/4 Ton
Lever Length: 11-3/8"
Lift: 10 Feet
Weight: 22 Lbs.
... Read more

Features

• Designed for close quarters.
• Weston-type automatic braking system for positive load control.
• Steel chain guide roller and chain stripper for smooth chain feed.
• Double reduction dual load sharing steel gears.

Product Description

CM series 637 short arm ratchet lever hoist. This imported hoist has a free wheeling chain for fast load attachment. It's features also include double reduction dual load sharing steel gears abd double pawl arrangement for optimum load control. This hoist is 1-1/2 ton capacity with 10 ft of load chain.

Capacity: 1-1/2 Ton
Lever Length: 16-1/4"
Lift: 10 Feet
Weight: 32 Lbs.
... Read more

Features

• Designed for close quarters.
• Weston-type automatic braking system for positive load control.
• Steel chain guide roller and chain stripper for smooth chain feed.
• Double reduction dual load sharing steel gears.

Product Description

The CM "puller" is designed for heavy-duty construction and industrial applications. This made in U.S.A. puller has easy one hand operation and control and requires only 58 pounds of pull for the 3/4 ton model. This hoist has a 3/4 ton capacity and 10 foot of load chain.

Capacity: 3/4 Ton
Lever Length: 5'6"
Lift: 5'
Weight: 14 Lbs.
... Read more

Features

• Used to pull, lift, drag or stretch with easy, one-hand operational control.
• Designed for heavy-duty construction and industrial applications.
• Features tough aluminum alloy construction and powder coat finish.
• Weatherproof for outdoor service.
• Simple construction with fewer parts for ease of maintenance.

Product Description

The CM "puller" is designed for heavy-duty construction and industrial applications. This made in U.S.A. puller has easy one hand operation and control and requires only 58 pounds of pull for the 1-1/2 ton model. This hoist has a 3/4 ton capacity and 10 foot of load chain.

Capacity: 1-1/2 Ton
Lever Length: 5'6"
Lift: 5'
Weight: 24 Lbs.
... Read more

Features

• Used to pull, lift, drag or stretch with easy, one-hand operational control.
• Designed for heavy-duty construction and industrial applications.
• Features tough aluminum alloy construction and powder coat finish.
• Weatherproof for outdoor service.
• Simple construction with fewer parts for ease of maintenance.

Product Description

Standard protector overload device. H3 duty cycle lifts up to 600 lbs. and 150 motor starts per hour. 10 pocket oblique lay lift wheel for smooth chain operation, constant chain speed and reduced chain wear. NEMA 12 industrial rated control station. Gear train lifetime lubricated with non-oxidizing grease. CM Hoistaloy load chain. Thermally protected hoist duty motor. Dual braking system - D.C. plus regenerative. Rugged cast aluminum alloy hoist frame. 5:1 design factor. Rigid latch style upper hook prevents tangling of power cord. Hardened forged steel latch style lower hook rotates 360. True vertical lift. Precision bearings used throughout hoist. Lifetime warranty. ... Read more

Features

• Shipping Weight: 30.
• Horse Power: 1/6.
• Lift Height (feet): 15.
• Lifting Distance: 15.
• Rated Weight Capacity: 600. Lifting Speed (feet per minute): 8.

Product Description

34 1/2 in. L winch bar makes it easy to tighten load binders. ... Read more

Product Description

You get a 6000-lb. capacity winch binder PLUS 20'L x 2in.W polyester webbing. Double J hook is rated at 4000 lbs. U.S.A. ... Read more

Features

• Total Width of Binder: 6.25in.
• Bolt Pattern on Binder: 2.75in.L x 4.5in.W
• 2in. W Strap
• 4in. W Winch

Product Description

You get our #15251 4in. winch binder PLUS our #12579 heavy duty 4in. W x 30ft. polyester strap with flat hook. Breaking strength 20,000 lbs. DOT load strap rating is 5000 lbs. Not for lifting. U.S.A. ... Read more

Product Description

Heres a safer, easier way to LIFT or PULL heavy objects 10 feet. Use it for loading and unloading equipment, pulling boats up on shore or yanking ATVs and snowmobiles out of deep mud, sand or snow. Use it for stretching wire and chain link fencing, lifting engines or moving fallen trees. Deer hunters use it for hoisting game. Handle folds for easy storage in the compact, heavy-duty case. Complete with 10-ft., 5/32in. aircraft-type cable. ... Read more

Product Description

Receiver hitch accessories like this winch mount fits into 2" receiver hithces and the ideal mount for any winch. ... Read more

Features

• Curt Hitch Accessories: Winch mount fits into 2" receiver hitch
• Durable EVERGLOSS Powder Coat Finish resists rust and corrosion
• Weather Tight construction prevents rusting for the inside out by sealing the main body.
• Precision robotic welding for superior strength and fit.
• Manufactured by Curt MFG. Distributed by RealTruck

Product Description

Curt winch mount handles only install on to the curt winch mount.Optional accessories by Curt MFG. ... Read more

Features

• Curt Winch Mount optional handles. Install onto the Curt Winch Mount
• Durable EVERGLOSS Powder Coat Finish resists rust and corrosion
• Weather Tight construction prevents rusting for the inside out by sealing the main body.
• Precision robotic welding for superior strength and fit.
• Manufactured by Curt MFG. Distributed by RealTruck

Product Description

Curt MFG offers winch mount with handles that fits into a 2 inch receiver hitch. ... Read more

Features

• Hitch Accessories: Winch mount with handles fits into 2" receiver hitch
• Durable EVERGLOSS Powder Coat Finish resists rust and corrosion
• Weather Tight construction prevents rusting for the inside out by sealing the main body.
• Precision robotic welding for superior strength and fit.
• Manufactured by Curt MFG. Distributed by RealTruck

Product Description

Wires directly to 120V AC StrongArm winch models. Pendant features "In/Off/Out" switch. ... Read more

Features

• 1,800 lbs double line capacity
• 1 YEAR WARRANTY

Product Description

These replacement Triple V-Groove Pulleys are solid steel, machined and balanced for smooth power to your G1023 type table saw. 7/8" bore. 3 1/2" diameter ... Read more

Features

• Bore: 7/8"
• Dia.: 3-1/2"
• Key: 5mm

Product Description

Just like our single V-groove pulleys, these solid cast iron double V-groove pulleys are machined and statically balanced to provide the smoothest power transmission possible. For A belts. Pitch diameter: 4", Bore: 3/4", Standard Keyway W x D: 3/16" x 3/32" ... Read more

Features

• Bore: 3/4"
• Pitch Dia.: 4"
• Standard Keyway W x D: 3/16" x 3/32"