Product Description

Discontinued Sell Until Gone: X. Item Info: The revolutionary Hoover FloorMate cleans, washes and dries hard surface floors with patented SpinScrub Brushes. 13-inch cleaning path,? Dual function dry/wet operation with beltless design ,? Deluxe grip with solution trigger ,? Includes: Specially Formulated 8 oz. Lysol and 8 oz. Old English floor and wood cleaning concentrates ,. ... Read more

Features

• Convenient wrap around cord storage
• Great for cleaning hard floors (wood, linoleum, etc.)
• Both wet and dry pickup functionality
• Vacuums, washes, and dries the floor
• Sturdy at 43-3/4 inches tall, 11-1/2 inches deep

Reviews (486)

Fantastic new gadget!
My entire house is hard floors (hardwood, tile and linoleum) and for a long time I couldn't even stand to walk around the house in bare feet because I never felt like the floor was clean. The hardwood floors had been covered with carpet for 30 years before I moved in and all that caked on and set in dirt never seemed to go away. As much as I like for things to be clean, I HATE to clean. The Floor Mate has been a godsend for me! I can use the Floor Mate without sticking my hands in dirty water, but still get that "mopping on your hands and knees" clean - and in half the time! I love the fact that you can dry vacuum, wet scrub and wet vacuum at the touch of a button with one machine. AND by the time you get halfway across the room, the first part you cleaned is almost dry.

One of the best parts of this is that not only does it work well but this sucker is easy to clean! The tanks snap on and off and all you have to do is rinse them out and snap them back on. The thing is clean and ready to be put away in 5 minutes.

Another thing I worried about was whether or not it would leak. With hardwood floors you don't want to set a vacuum in the closet if it's going to drip because it will damage the floor. Somehow this machine does not drip once it's been emptied. I do use the wet vacuum as the last step before I turn it off so I suppose that helps.

Long story short, I think the Floor Mate is wonderful and I would highly recommend it to anyone who wants a clean floor but doesn't want to do it the hard way!

Four and a half stars really...
I use my floor mate on vinyl kitchen flooring and I have to agree with the positive comments already given by the other reviewers.I won't bore you all to tears by saying the same thing in some new way.What I do want to mention is that I only give this thing 4.5 stars because the dry vacuum mode is not all that great.If you have a few crumbs in the middle of your floor this will pick them up no problem.If you have a few crumbs around your baseboard or in the corners (as many of us do), this thing will drive you mad as you try unsuccessfully to pull those crumbs.Eventually I give up and sweep with a broom first and then use the scrub/wet vac settings to produce a very clean floor.Its a small complaint but one I though worth mentioning.If the vacuum power on this thing were a bit stronger, it would easily be 5+ stars!

A must buy
I bought this anticipating having alot of tile in my new house and Ilove it before I have the house!It works great on all kinds of vinyl and if you have a pet its great because you can vacuum up the fur.It hards to get it all up with sweeping or swiffering alone, but this sure does the job!!

Its OK
I have had my floor mate since Christmas. I love the way it cleans. It DOES leave my floors beautiful. On the otherhand. It is a PAIN to lug around. It is pretty heavy considering a swiffer wet jet does about the same job. I use the floormate about once a month for kitchen tile and hardwoods throughout the house. Otherwise, it is much easier to just get out the wet mop for everyday dirt. <br /> To sum it up...too expensive for what it does...still have to clean up the machine afterwards.

Excellent!
Within its abilities, this is an excellent tool to keep around.I have a dog with muddy paws, and white(ish) linoleum in the kitchen that she comes in through.When it rains (or has rained) she comes in and puts muddy paw prints all over the kitchen floor.No problem!I keep this in the kitchen, it's already plugged in, so I pull it out, run it, and within 5 minutes the floor is clean again.Not just wiped up, but actually scrubbed clean even with cold water.I have problems with my knees, so getting down and scrubbing is not something I would do.This vacuum has enabled me to do things I can't physically do.

Hot water does seem to work better on tough stains, and I have found it is better to use my Dyson "Animal" (available at www.amazon.com, target, sears, and a few other places - search for "Dyson Animal") vacuum to get the dog hair and other debris up first. ... Read more

Features

• Tapping block included
• Powerful
• Easy to use
• Tool-free adjustable base will install 1/4-inch through 1/2-inch laminated flooring from almost every manufacturer
• Drives staple at a perfect angle

Reviews (7)

Throw away the glue, buy this tool
This tool enabled me to take on more than I would have had I continued to use glue like they told me to do at Home Depot. The first room I worked on I used glue and decided I had to find a better way, this was it.

The flooring went down easier, the finished product was much better, and the frustration level went down.

The hardest part was learning how to load the staples. After that it was a snap

An Excellent Choice
You can not go wrong with this stapler! It is easy to setup and performs flawlessly. I have done several-hundred square feet of 3/8" engineered hardwood flooring without a hitch. I highly recommend this tool!

The Perfect Choice
The S3297-LHF flooring stapler did the job! Beats gluing. I have layed over 500 square feet of the 3/8" engineered flooring without any negative issues with this stapler. Looks like I will be laying flooring in more rooms in the future, according to my wife. This was the first flooring that I have put down and it turn out to be a professional job, thanks to the S3297-LHF Bostitch Stapler. This is the tool to buy if you want your floor layed correctly.

Needs a case.
I bought this stapler after using a Porta-nailer to install 1000 sq. ft. of hardwood laminant flooring. The Porta-nailer was bulky, hard to use and couldn't do the last 3 rows since you have to hit it with a hammer to drive the nail. With the S3297-LHF-2 I could do upto the last row which of course had to be face nailed. I would recommend this to anyone who has to lay laminant flooring. The only thing that disappointed me was that it doesn't come with a case for storage and the keeping it in the cardboard box beats up the box.

Easy and Great
I purchased this to install 3/8 engineered flooring and it is very easy to use. Loading is simple and fast and the instructions are brief and clear. I have installed 150 sq ft out of 500 sq ft total and the only problem I have encountered is running out of staples and not realizing it until I am a few boards down. Don't know how to solve that. ... Read more

Amazon.com Review

For a burly saw with a big blade, DeWalt's 12-inch compound miter saw is surprisingly lightweight (40 pounds) and portable. This saw makes smooth cuts through the thickest of stock, crosscuts a two-by-eight with ease, and--with its extra-high adjustable fence--miters crown molding up to 6-5/8 inches nested vertically against the fence (a timesaving feature that's reason enough for some trim carpenters to buy one). The fence also slides away for bevel cuts.

What impressed us the most was the weight and balance of this saw: the blade lowers easily into the cut, bevels are easy to set, and the miter gauge swivels smoothly. The saw's nine positive miter stops (detents) let you lock into the common angles quickly, but you can still dial in a 1/2 degree off the detent without the gauge dropping back into the stop. The detent plate is made of sturdy stainless steel, too, so it's hard to imagine it developing any slop even after years of use. The gauges are easily accessible and easy to read (what's more frustrating than having to lean around the saw to set on angle?). The saw miters up to 48 degrees on both sides and bevels left to 45.

Unlike some of their competitors, DeWalt mounted their saw with a burly blade guard that retracts smoothly and doesn't interfere with your line of sight. DeWalt's D-handle design favors right-handers, although the trigger's wide enough to use fairly easily with your left hand when cutting left-side miters. The saw doesn't have a safety switch--which, frankly, is fine by us, since some safety switches can be downright dangerous--but it's something to consider if you're doing residential or remodeling work where children might stumble across your tools. --Jon Groebner ... Read more

Features

• Features tough ball-bearing construction, and weighs only 40 pounds
• 15 amp motor features an electric brake for quick blade stop. Bevels 0-45 degrees to the left
• Stainless steel miter scale with 9 positive stops for cutting common angles
• Extra tall sliding fence allows 5-1/4" crown to be cut standing vertically

Reviews (59)

DeWalt 12inch miter review
The saw works great, simply put. It's very well made, strong, and very accurate. As with any adjustable new power tool, it is highly adviseable to check it's alignment. All you need is a square and torques bit,(not included with my saw). The head tilts very smoothly,(a must for accurate work), the miter detents are right on target. To my knowledge, Dewalt has the only adjustable miter detent settings available. When wear occurs over time, the stainless scale is adjustable , keeping the accuracy in check. The high back fence works real nice when cutting crown molding, especially when used with with the optional crown stops. They are worth the price. A tip here, cut you some angle blocks from pine,what ever,(37.5degrees) an lay against the fence, this will ensure very precise cuts. The standard 60 tooth blade is also very good for most cutting, it has a negative hook for beter control when cutting. I have had this saw for 18 months without any complaints at all. The compound adjustment works very easy, but before sawing on the compound, check your yellow plastic strips as they may be to close, as you will cut into them. They should be as close as possible when normal cutting, but after you change to a compound cut, they wil get cut. When changing the blade, remember the blade retaing bolt is left hand threads. The dust bag works the best on any saw I have tried. Power, it has plenty, and the brushes in the motor are very easy to change, no special tools required. To some up, It's (in my opinion) the best buy of any miter saw, especially when all the features are compared, and it's AMERICAN MADE. what else can I say, but watch your fingers. I now have the 12 inch slider, but that's another story.

Good Saw
I have had my saw for 2 years and use it ofen. My first recomendation should you buy this saw is to take the blade that comes with it off! I put a 96 tooth blade from Freud on the saw and it made a huge difference. The saw is comfortable to use and has sufficient power. It will bog down cutting larger pieces of hard wood. I really like the D-handle design. The detents are very nice, the saw locks positevly in place. It is easy to adjust the detent plate to achieve perfect miters, nothing is more annoying than 43deg angles that are supposed to be 45deg. The blade does seem to have a slight wobble when trimming the ends of boards. Lately my saw has developed a squeak when it winds down after making a cut. The bearings seem smooth when the blade is rotated by hand, so I do not know what the squeak is. I think the quality of this saw is good for the price. If I were to buy a miter saw again I would buy a sliding compound. The extra cutting capicity would be nice. A better dust collection port would be nice on this saw, the hose hook up is small and some of the dust shoots past the dust box.

Excellent saw
A major remodel at home finally convinced me to pull the trigger and buy a high-quality miter saw. Based on the reviews and research I read here and elsewhere, I chose the Dewalt 705S and I have not been disappointed.

The saw cuts smoothly, strongly and precisely. The ability to positively lock in the most common settings is handy, it makes basic work go very fast. You hear it click in and you know it's right on with no fuss. The high fence means you can handle tall stock easily. It also lets you dial in very precise angles when you need it. I've been doing a bunch of finish work in a remodel of an older house where it seems like there isn't a straight, true wall in the place, and this thing's ability to actually give me a real 43 degrees when I need it without any fuss has been wonderful.

For compound cuts, the saw will lock down very easily, and the knob to lock the compound angle into place is huge and very solid. It's not quite as easy to set the compound angle as the basic miter, but it's not hard, either.

It seems very solidly put together. The fence is very sturdy and nicely made and designed. Working with long stock has not been a problem for me because the fence works very well. The motor has plenty of power, even thick hard-wood cuts easily. However, get a high-quality extension cord if you need to use one. The motor is a real monster and a regular cord I was using slowed down cuts in hard wood noticeably, leaving less clean edges. With proper power, the stock blade it came with cuts very nicely, even for trim work. It's heavy enough that it feels solid when you are working with it, but it doesn't kill you when you want to carry it around. Little touches like the power cord and plug being super-heavy duty lead me to think I'll be using it a long time.

I can't say whether it's better than other saws out there, but I am very satisfied with it. I'm not a professional and this saw may have been a bit of an extravagence for even a serious D-I-Y guy like me, but I think it is a very good, well-designed product and I can recommend it without hesitation.

Perfect
I bought this saw at a the local Home Depot and haad no problems with it so far. I'm just a kid and i've already installed trim in my parent's basement after a flood and it looked perfect. The standard blade, 60 teeth, i've counted all of them, that comes on it is enough for trim work but the more teeth, the better. This saw gets plenty of use, and it still cuts a perfect 90 degree angle since I got it out of the box. I recommomend this to any one looking to buy a compound, not that small nor light, miter saw. I would have bought the sliding, but unfortunately, that is way too expensive.

Rock Solid Performance
This saw does everything I've asked of it, comfortably and consistently. I've chopped everything from 1X2 lumber to 4X4 PT and even aluminum. The big blade is key - you can get by with a smaller blade but it should be a slider, which costs more. The saw is easily portable and locks down for transport. ... Read more

Product Description

Porter Cable 362VSK 4" x 24" Belt Sander Variable Speed ... Read more

Features

• Powerful 12.0 amp motor provides 20% more power than before
• Motor is located directly over platen for maximum performance and perfect balance
• Variable speed dial is conveniently placed on the handle allowing belt speed adjustment from 1,000 to 1,500 SFPM
• Designed for flush sanding up to vertical surfaces

Reviews (3)

almost good
I've owned this sander for a couple years, but not being a big fan of belt sanders it has spent much of that time wishing I would notice it. Sporadic use made me feel that it was a worthwhile addition to the toolset, but it wasn't really tested until recently. Retired now, I volunteered to install an unfinished red oak floor in my son's family room, and having the time I decided to use the PC 362VSK for the sanding phase. I consider this a serious use of a belt sander. Here are my thoughts so far:

The tool is heavy (as we all know), so its weight (combined with the proper belt grit) provides the necessary "pushing down" force. Belt change is easy. Belt tracking is also easy to set and even if tracking wanders (not often) the easily-accessible knob makes it a non-issue. The balance seems to be good. After doing the entire floor (3 grits) it was still going strong.

Now for the negative, no stars (not even a glimmer) ratings: the dust collection is pathetic. That useless bag sticking up there getting in the way, coupled to the tool with an ineffective ball thingy that's difficult to use (and has no seal) is..well...pathetic. The dust bag will eventually fill, but this is purely coincidental...not to be confused with a dust collection system that actually works. And as far as I can see the port isn't designed to be connected to a separate vacuum...I duct-taped the hose of my Fein vac to the port and that worked well, but c'mon...duct tape?? (BTW if you take this route also tape the power cord to the vac hose making it essentially one unit...much easier to manage).

The other major issue is the sanding shoe...it warps, as another reviewer reported. Mine became convex, so the sander "rolled around" on the platen digging in and not sanding flat. Some time ago I had purchased some carbon impregnated fabric from Woodworker's Supply that was designed to be used on sander platens, so I took the metal shoe off, fitted a piece of this stuff to the cork shoe, and it worked fine. I wouldn't recommend this machine until PC includes the carbon shoe as standard. If you do buy it get the carbon shoe at the same time and send the metal one to PC with some appropriate suggestion as to what they might do with it.

This tool can do the job, but out of the box I don't consider it ready for a serious sanding project. You have to figure out how to deal with dust collection because Porter Cable hasn't, and you have to get rid of the metal shoe. It's probably one of the best 4x24s out there apart from these issues, but if mine ever goes to the boneyard I'll be tempted to try the Bosch.

High quality
I have had this sander now for 10 years,and have put many hours of use on it. Absolutely no problems with reliability,no problems with the platen.This is a heavy sander,so I use it on larger surfaces; the vac bag really works.If you have a lot of surface to sand down, this will do the job.

Great sander that gets the job done.
Finally decided to buy this sander, was waiting for others to review it first.Bought it at Home depot, since I needed it immediately for subfloor preparation.It does everything that is promised and it definitely has enough power.Although I found myself using it on high speed.Getting the belt tracking takes a bit of practice but stays centered otherwise.I used it all weekend sanding OSB underlayment for our subfloor in preperation for laminate flooring.It did everything I had hoped for.It did not remove material as fast as I though it would even with 60 grit belts, but this is in comparison with a floor sander, so no fault of the product.Only reason why I rated 4 is because of the sanding shoe that comes with it.I read some other posts on similar sanders and some people had problems with the sanding shoe warping.Well I had that exact same problem with this unit.So I highly recommend getting the graphite impregnated sanding shoe along with this sander.Once the shoe cups in the center, it is essentially useless since there is no more contact with the surface, other than the edges.This thing does get very hot quickly, which would explain the shoe cupping so fast.Light work would probably not see this cupping so soon, but since I was sanding floors, it was immediate.The dust extraction works good, it actually sucks the dust into the bag very well, as compared to other sanders.It is heavy as you hear from others, but this comes in handy where the weight may do some of the work for you by staying in one place.I paid the same price for the sander as amazon had listed, but I also had to pay tax.But got a 10% off lowes coupon from ebay and used it since HD takes competitors coupons, so was less than amazon.Overall I am happy with the unit. Just to give you an idea of how powerful this thing is, it was able to drag me across the room while on my kneepads and I'm 160 lbs.It was kind of fun, when I was done sanding one area, I would use the sander to drag myself to the next room and continue working without having to stand up. ... Read more

Amazon.com

Here’s huge cutting capacity in a surprising size. This 8-1/2 inch single-bevel miter saw really does cut a 3-inch post in a single pass, just like DeWalt says. And it’s also the only saw its size we’ve seen that will trim 3-1/2-inch crown molding vertically, because of DeWalt’s taller fence. With its smooth slide action, you’ll choose this over your table saw when it comes to cross cutting—-even a 12-inch board. It’s got all the features of the bigger, high-end saws, and then some. Five preset bevel stops zero your blade in at 0, 33.9, 45, 48, and -2 degrees, and there are 11 dead-on accurate miter stops at the most common spots: 0, 15, 22-1/2, 31.6, 45, 50 (left), and 60 (right) degrees. What we like best about this saw is the awesome ergonomic details. Anyone who’s used comparable saws repeatedly will tell you that the vertical handle causes some fatigue, especially on saws with a safety button. But this saw’s got a horizontal handle, keeping your hand and arm in a more natural position, cut after cut. Most saws’ miter adjustment involve turning a knob a few revolutions to lock and then to unlock the miter setting, but this DeWalt has a really nice cam lever lock that eliminates all that twisting and is just as reliable. This saw does throw a lot of dust, but we’ve not seen a saw that doesn’t (even those with dustbags still make a mess). We’d recommend building a little jig to hold your extraction system hose close by. This is a fabulous saw for the contractor. It weighs only 43 pounds and is easy to tote because of the handle. But it’s also the perfect choice for the woodworker. An aside: DeWalt makes a great miter saw stand that fits this saw like a dream.--Kris Jensen-Van Heste ... Read more

Features

• Includes saw, 30T carbide blade, and blade wrench
• Capacity to vertically cut 3-1/4" base molding and 3-1/2" crown molding nested vertically
• Bevel-stop system with manual override provides five pre-set bevel stops at 0, 33.9, 45, 48, and -2 degrees
• 11 positive miter stops including 0, 15, 22-1/2, 31.6, 45, 50 (left), and 60 (right) degrees
• Push-button miter cam lock for better ergonomics

Reviews (7)

Good but not great
Let me start off by saying that I have yet to find any miter saw that I would rate at five stars(although I do believe I rated the 12" Dewalt slide at 5 stars) because every manufacturer does put profit above product. However, I do like this saw very much. Slide is smooth, fence height good(when will Makita and Hitachi finally get the fence height right and even on both sides), lever action miter lock is awesome(knobs stink), blade deflection is good(it is only a 8-1/2 blade afterall), overall a really good saw. Dust collection complaints are irrelevant, as anyone expecting a slider miter saw to have good dust control lives in the world of clean radial arm saws too. I have yet to figure out what a "material hold down clamp"(or work clamp) is, but if I ever do, it means that I cut off on of my arms/hands and should not by using this saw anyway(we pros dont have time for clamping down wood prior to cutting it[short pieces should be cut from a long one, afterall]). I would buy another one in an instant.

Nice saw for cabinet/furniture makers
I've had this for about 6 months and it's never let me down. It takes a little getting used to if you've never used a sliding miter saw before, as the technique is somewhere between a radial arm saw and a normal fixed miter saw. As a couple of other reviewers pointed out, you have to make sure you slide the saw all the way home or you'll leave a little bit uncut.

One thing I've found is when I'm cutting narrow planks (4" or 6") I've gotten into the habit of pulling the blade toward me past the front edge of the piece, dropping it down, and then sliding it back through the piece - instead of just plunging the blade straight in, as you'd do with a fixed chop saw. This seems to significantly reduce bottom tearout.

It's undeniably a very pleasant tool to use; if you've only used saws that have a vertical handle you won't believe the difference the horizontal handle makes. The switch is well designed, it's not easy to trigger by accident but not fatiguing to hold. The action of the slides is smooth as silk, and setting the miter angles is quick, easy, and very positive. The motor has plenty of power for any kind of wood I've ever sent its way.

The 8 1/2 inch size has some advantages - the blade seems to be more stable, even without a stabilizer, than most 10" blades. Also in my experience 8 1/2" blades are a little cheaper than the equivalent 10" blade. But, it won't cut a 4x4 (or a 2x4 on edge) in one pass - a 10 incher will. Whether or not that matters depends on the kind of work you do.

You'll want to replace the blade that the saw comes with, it's fine for chopping up 2x4s (but if that's all you want to do you don't need this saw) but not good enough for finish work. There aren't a million blades available for this size of saw, but there's a decent selection - although not all the catalogs carry them. My favorite is a 60 tooth DeWalt finish blade that you can find most anywhere for about 50 bucks and does great work for me in all types of hardwood. Freud makes one that's pretty good as well. Forrest makes one of their chopmaster blades in this size, I'm sure it's great but it's $100+ and since I'm happy with my current blade I've never tried it.

Overall fit and finish is very nice - as you generally expect from contemporary Italian manufacture. After taking it out of the box, I went over it completely with my machinist square and couldn't find anything out of alignment. The only quality complaint I have is the crummy screws holding the blade guard on - blade changing is not exactly a snap with this saw and they really don't help.

There's no clamp included, unlike some other manufacturers - since I prefer to keep all 10 of my fingers I bought one - but they soak you on this item - $35!! Actually I bought two but you only need one - you hardly ever use both at once and it takes a second or two to swap it from one side of the saw to the other. Also, while it holds well, it's a screw type and I would prefer some type of cam action - I think that would be faster and easier to use.

But overall if you want a really sweet, pleasant to use saw and you don't normally need to cut large timber, I'd recommend this saw - I'm certainly very happy with it.

dewalt 8-1/2' miter saw
Overall I think this saw is an excellent saw,it cuts smooth and acurate and is lightweight.Ther are a couple of things I was dissapoionted with,first of all the if you are going to do any kind of finish work you need to replace the factory blade which is only good for cutting 2x's and a good blade is going to cost you and extra $100 or so.I was also dissapointed that the saw was not manufactured in the USA,the technical details provided in the review stated it was, and that played a large part in my descision to purchase this saw.Last of all the saw could of least came with dust bag which costs an additional $15.Whith the addition of a new blade and dust collection the performance of this saw is very good.

Nice saw
I picked up the Dewalt 712 to replace my 10" makita. Cuts smooth and was cutting square out of the box. The one thing I found was when you finish the cut, you have to make sure the saw head has been pushed all the way back or else it leaves a small amout of material uncut. They need to push the fence forward a 16th of an inch. Also for $400.00 they should include a dust bag! Overall a good quality saw.

A Really Nice Saw
I got my DeWalt saw a month or so ago for use on job sites. The first project I did with it was to build a 100 square foot sauna with three rows of benches.

The saw was dead on accurate right out of the box. I was immediatly impressed with its light weight and compact size. The saw cuts beautifully and slides nicely on the rails. It is also much quieter than other miter saws I have used. The cutting capacity rivals bigger saws, except you can't cut a 4X4 in one pass (something a trim carpenter/woodworker like myself never does). The horizontal handle is very comfortable to use, even after long days. The depth stop is perfect for jobsite dados.

Dust extraction was good. It does not come with a bag, but I noticed most of the dust escaping through the port. When I hooked the saw up to my Fein vacuum, the dust collection was very good.

The supplied blade is suitable for most carpentry, but is not sufficient for nice trim work. The nice thing about an 81/2 inch blade though is that a new one won't break your wallet like the 12 inch blades will.

Overall, a very nice, light, and compact saw, which exceeded my expectations for the $399.00 price. It is the first saw that I have seen designed for the woodworker or trim carpenter. If portability is important to you, this is an outstanding saw. If you are going to set it up relatively permanently in your shop, then I would suggest a 10 inch slider (Makita makes a nice one). I can't imagine a need for a 12 inch slider. ... Read more

Amazon.com

Arguably the best portable model on the market. To best minimize snipe, Makita came up with an innovative four-column design and fortified it with diagonal cross supports to stabilize the cutterhead while the patented Interna-Lok cutterhead depth adjustment secures the head while cutting. We particularly like how easy it is to adjust the depth scale and gauge. The depth stop makes sure you never overplane multiple pieces. The infeed and outfeed tables are supersized - another little perk we liked. Often, changing planer knives is an ordeal, but Makita's quick-change system and externally accessible brushes minimize your maintenance time and get you back to what you really love doing. The unit is relatively lightweight as these machines go, and at 83 decibels, is among the quietest of its kind. Still, please use ear protection when you're using this little beauty. --Kris Jensen-Van Heste ... Read more

Features

• Supersize infeed and outfeed tables maximize work support
• Compact and lightweight for easy transporting to the job-site
• 15 amp motor delivers no load speed of 8,500 rpm
• Table size of 13 by 30-3/8 inches
• Patented Interna-Lok automated head clamp minimizes snipe

Reviews (25)

Worth the Money
Much like other reviewers, I have a small shop and make personal furniture and cabinetry. I too agonized over the purchase of a planer. The obvious dilemma is between a floor model 15" and a portable 12". The Makita is more costly than most of the portables, but less than half of the stationary 15" models.

After reading of the trouble others have had with the Delta (and my own negative experiences with Delta) I decided to spring the extra bucks for the Makita quality.

Great decision. This planer performs flawlessly. As long as you keep each pass shallow, snipe is of no concern, and I also agree that you have to cut the ends off the stock anyway. Snipe won't mean a thing if you have a board end check on you after you have completed a project.

I too reserve the other 5th star for longevity, as I have only had the planer for several months. As for the dust hood-I plan to save myself the money and just make my own. Any true woodworker can handle the fabrication necessary for a rectangular plenum with a round outlet-it's held on by a couple of thumb screws.

I say you can't beat this planer.

Well worth the price !!!
I recently read an article in one of the Popular woodworking comparing many of the 12" bench top planers. I had my heart set on a Delta, since my experience so far had been good. Boy did that article change my mind in a hurry. They has only good things to say about this planer. The only downside was the price. They said that they loved the planer, just couldn't justify the price. Well, I could. I'm sick of getting exacty what you pay for. I'm willing to spend a little more and get top quality. If you are too, this is the planer for you. Got it (from the tool-crib BTW) on Sat and spent the next day planing some 4/4 red oak. Beautiful finish !! A fine sanding is all that's required. Also, the stop remembers what your last, final, thick- ness was, which came in handy as I needed another 3/4 board and had already put the planer away. Snipe was a minimum, maybe 2-3 inches on the feed end and, as long as you're careful, none on the back end. Take some advice, get yourself a nice pair or dial calipers. I got a 6" Starrett from the tool crib here and it, in conjunction with the planer will give you the _exact_ thickness that you need. I'm sick of going to the lumber yard and ordering 1/2", and some are a little strong of 1/2" and some a little shy and none of your dados are fit like the test cut did. Another cool feature is the thickness dial on the crank. Using the calipers, you find that you need another 1/32" off the side. Set the 1/32" mark on the thickness dial, turn the crank until the '0' matches up with the mark and it takes off the required amount, no more, no less.

Makita 2012NB 12" Portable Planer
A joy to use. Simple, straight forward and without all the marketing hype of some of the other machines. Stock feeding is a very easy task. Transport is positive without the bother of a lock each time you make a pass. Crank adjustment is very easy to adjust for the smallest of stock removal. The depth stop is easy to use. The unit worked perfectly right out of the box. Read the instructions, plug it in, turn it on and your good to go. Fit and finish is top drawer and it's hard to imagine how it could be better. Unit produced just the smallest amount of snipe at about 1 1/2 inch from the ends. No big deal, a few passes of 220 grit sandpaper and it's gone or , I perfer to just cut it off. I only mention the snipe because it's there, not because it's a problem. Again, not worth taking a star away. This has fast become my favorite power machine, and I have them all. Go buy it. Simple , straight forward and rugged. It's a winner.

Great planer!!!
I am glad that I had bought this planer. I have planned some 10ft long 8/4 mahogany boards with it and the finish was excellent. Sniping was minimal and in most cases nonexistent if I support the board correctly while feeding it in and as it comes out. I did buy it new from Amazon and used it without any need for adjustment. I think the quality is very good and the planer is very quiet comparing to an old portable Delta planner that I had.

A Fine Planer
I bought this planer based on several factors. In no particular order they were: Makita's reputation, the reviews I read at this site, and its claim as being one of the quieter planers. I have never used another planer so I can't give a first-hand comparison. I can say, however, that I have been very happy with this tool. I used it quite heavily for building a workbench from hard maple. It is quiet, as advertised. I found it very easy on the ears. I had no problems with snipe, though I agree with other comments on this site that problems with snipe are overblown. Just trim your boards to finished length after planing. But as I said, I never had any problems. The blades were easy to change, and in general I found the tool accurate and easy to use.

For the most part, the finish was ready for sanding. However, when planing some of the heavily figured maple there was some tear out. I have since found out that this is to be expected and one should not expect a final finish from a planer on figured wood. In fact there is whole time-honored regimen for surfacing figured wood involving high-angled planes and scrapers. Just thought I'd pass that along.

If you've never had a planer before you will probably be surprised at how much of a mess they make. You will most likely want to add dust collection at some point in the future, so if you don't buy the dusthood now plan on buying it at some point down the road. ... Read more

Reviews (13)

Well built piece of equipment
I have to agree with the other reviewers, this is a well-built piece of equipment that makes my old plastic hose cart look likecheap garbage.

A reel sent from heaven.
I have bought many "plastic" reels from your regular fix it yourself stores.They barely last 1 year if I'm lucky.When UPS delivered this one, I could hardly lift it it was so heavy, I knew I had something good and sturdy.I opened the box and started putting this baby together, what a beauty.I paid $140 for it, but it was worth every dollar.I hosed it up, gave it some water, and it worked like a champ, the first time,with no water leak anywhere.And I feel good since it's made in the good ole USA.

Misrepresented
Today I just received the Rapid Reel I ordered, in black.The problem I have is the product is last year's version with the T-bar stabilizer, not the newer improved version which is PICTURED as the product. I don't want the hassle of returning the item...Just wished I got the product I saw and paid for.What gives Amazon?

Worth the higher price - down with HD's Plastic Copies
I went to Home Depot and bought one of those plastic Hose Reel carts - like everyone else on the block - and was so disappointed that I returned it (the wheels would lock up like an old shopping cart).I knew that there had to be a better option out there.Well, after doing some research I came across this Hose cart.When it arrives at the house and you try to pick up the box you will immediately notice the difference!!This is a REAL Hose Cart!The real rubber tires are huge and roll over anything (sand, gravel, etc.. unlike those cheap plastic wheels on the HD/Wallmart/Lowe's carts).Spend the extra cash, especially if you have a bigger yard and a lot of hose.Easy roll up also.Don't be a wimp and buy those crappy plastic things - be a pioneer on your block. :-)

wrong to lust after hose reel?
I saw this reel at a local garden center and immediately fell in love.They wanted over full retail so I ordered it from Amazon. along with hoses.I ordered the larger model which holds 200' of hose.The holes were not lining up and it took me about 45 minutes to get it together but it is wonderful. ... Read more

Features

• Includes 1 year limited warranty on parts and accessories
• 11.5 amps, 0-2,900 spm, 1-1/4" stroke
• Keyless clamp and shoe with variable speed trigger
• 180 degree joint adjustment and 360 degree blade rotation
• Includes case

Reviews (2)

Well Designed Tool
I bought this saw a year about a year ago. I needed to cut a 2" cast iron pipe that came up vertically through a 12 inch square concrete hole. The cut had to be in the bottom of the hole and be at a perfect 90 degree angle. Theoretically the same cut could have been made with a modified hacksaw, but it would have taken 50 blades and two days. With this saw it took two blades and 10 minutes. This was the only power tool that could perform this cut, which it did with some effort on my part The important part was that this cut eliminated the need to delay the project for three days to remove a hot water tank and a three foot square area of concrete in order to use a standard reciprocating saw or grinder. Since then I have found this saw to work great as both a standard reciprocating saw and as a special purpose saw.

Most of the time this saw is used like any other reciprocating saw - fully extended and straight. However, the one time that you need to cut something that is not in front of you and perfectly square to you, you will see where this tool shines. The head on this saw can be positioned in many angles and the blade literally spins 360 degrees. This adjustability does two things. First, it effectively makes the saw shorter, which was why it worked where no other could in my plumbing example. Second, the saw can be adjusted to literally fit the angle of the material that you are cutting, no matter where you are in relation to that material. Often, when you use a reciprocating saw in a remodel situation, you don't have the luxury of standing dead square in front of a level cutting surface.

This saw gives you more control by allowing the blade to be adjusted so it is square to the cutting surface when the operator cannot get into that same position. Since, the head on this saw that holds the blades can be positioned at almost any angle relative to the trigger handle, this means that you can get the saw's shoe, into a position that allows the shoe to rest on some part of the project; thus improving control AND safety. For example, with this saw, you can cut fit the saw head (not the whole saw) between 2x4 studs on 16" centers. This allows you to make more precise, square cuts in existing walls (say that have sheet rock on one side that you do not want to disturb) for modifications to the framing. Reciprocating saws have always been good for remodel work, but this saw is amazing. This saw has a system for loading blades that is quick and secure. The saw is smooth running and the variable speed control is .... well.... smooth. You can make cuts with this saw that, until now, were done with handsaws, drills, chisels, brute force and circular saws held in dangerous positons.

I have thought about writing this review since I bought this saw over a year ago and used it on my plumbing project. I have used it many times since and each time I think "I am going to write a review on this saw because people need to know that the extra money spent on this saw is well worth it for the added functionality." I used the saw AGAIN this weekend and I was AGAIN reminded how well designed and built this saw is. If you plan to use this saw for remodeling you will not be dissapointed.

BEST SAW EVER MADE , MOVE OVER MILWAKEE
I HAVE BEEN A CONTRACTOR AND HOME BUILDER FOR 30 YRS AND I HAVE ALWAYS BEEN A MILWAKEE SAWZALL FAN,BUT HAVE ALWAYS ADMIRED THE TIGER SAW FOR ITS SHEAR POWER.THEN CAME THE VARIABLE ANGLE TIGER SAW AND I HAD TO HAVE ONE. WELL THE GUY WHO DESIGNED THIS SAW IS ONE OF THE GREATEST MINDS IN TOOL DESIGN. THIS SAW CAN BE ARTICULATED INTO ANY POSITION YOU NEED. IT GOES WHERE NO OTHER SAW WILL GO AND ALLOWS YOU TO HOLD IT IN POSITIONS THAT MAKE IT EASIER AND MUCH LESS DANGEROUS TO THE OPERATOR AND THE POWER IS FANTASTIC, IT CAN'T BE STOPPED. THIS IS NO GIMIC, THIS IS A SAW IN A CLASS ALL BY ITSELF, THERE IS NO BETTER SAW OUT THERE.THIS SAW IS WORTH TWICE THE MONEY,DO YOURSELF A FAVOR AND SPEND THE EXTRA MONEY ,ITS WORTH EVERY PENNY AND YOU WILL NEVER BE SORRY. ... Read more

Amazon.com Review

A six-power Briggs and Stratton Quantum motor powers this trimmer mower as it effectively and evenly trims tall weeds, sharp corners, and wet grass. The trimmer mower also excels on flat plots, hills, and other rough terrain alike.

The trimmer mower provides three cutting length options from 1-1/2 to 5 inches. An extended trimmer head permits the mower to reach grass under low-hanging bushes while simultaneously protecting users from flying debris. The trimmer also comes equipped with a head clutch to enable a safe, quick, and easy engine shutdown. The 14-inch ball-bearing rear wheels resist rust with a sturdy composite nylon construction as they help push the trimmer with a minimum of friction. The trimmer mower comes assembled with a complimentary oil supply. Troy-Bilt offers a limited lifetime warranty and a product registration program. This trimmer mower covers a width of 22 inches. --Jessica Reuling ... Read more

Features

• Mower covers 22 inches; limited warranty and registration program available
• Trimmer mower with 3 cutting lengths; accommodates most lawns
• Rust-resistant ball bearing wheels with composite nylon construction
• 6 HP Briggs and Stratton Quantum motor; no assembly required
• Trimmer head permits mowing under low bushes and deflects flying debris; oil included

Features

• Limited Warranty
• All-metal ratcheting chuck with carbide jaws for the highest grip torque on bits
• Milwaukee-built motor provides up to 495 in./lbs. of torque
• Up to 50% more run-time than competitive products
• Milwaukee's exclusive reversible battery allows users to adjust balance and get into tight spaces

Reviews (15)

You'll never look at a yellow tool again
I bought this drill after reading several reviews in woodworking magazines and this forum. There just aren't enough adjectives to describe what a work of art and workhorse this drill is. Enough power to satisfy even Tim Allen and yet it doesn't have a bulky, over-weight feel. From the lowest torque settings all the way to the hammer function, the gear action is as smooth as glass and it _never_ feels like it's running out of gas even drilling into hard metal. You can't go wrong with this tool. Once you use it, you'll be a Milwaukee convert for life.

This is what five stars are all about!
What a pleasure to use a very well made tool. Milwaukee's reputation for heavy-duty quality is again backed up by this top-of-the-line cordless. I've been driving screws with it building a shed, and the battery life is really impressive. Grip feel, balance, torque and overall sense of quality are great.

A quick rant about tool cost (and it's not like Milwaukee is particularly expensive in the first place): I'm constantly amazed at people who will pay $25 for a meal, a cab ride or a few drinks without thinking twice, but will balk at paying a bit more for a tool that will last a lifetime! Think long-term: Reward excellence; treat yourself and buy quality -- whatever the brand.

Performance, performance, performance...
If you are looking for a cordless that can, look no further. I bought it primarily on it's performance specifications, and have not been disappointed. A big factor for me was speed. My old model topped out at 1300, and most of the competitors are in the 1400 to 1550 range (other than a yellow 3-speed model). I appreciate a unit that can twist at 1700 rpm but still have plenty of torque when you need it at the low end.

Another important spec for me was the battery life. Haven't had it long enough to judge yet, but I presume the 2.4 ah should need less charging.

In addition to motor & battery performance, I was highly interested in chuck performance. (This is probably the main reason I wanted to relegate my old unit to backup). The Milwaukee chuck has performed wonderfully, gripping shanks of all sizes like a mad pit bull. I also appreciate the reversable battery mount, which amazingly eases the hand strain when you are drilling overhead( By lowering the center of gravity to below your grip).

My only possible reservation about this model is durability. It just doesn't look as rugged as the Bosch model I looked at. I don't plan on dropping it, but you never know when your going to set it down in the wrong place at the wrong time. Another reviewer said he dropped it from a step ladder with no ill effect, however, so maybe it's tougher than it looks.

Simply the best
One of the finest tools i've ever used. reliable with Power to spare. A bit on the expensive side but well worth it. 2 batteries included.

My Hammer Drill can beat up your Hammer Drill...
I bought this beast about a year ago to replace a DeWobble DW959K-2 (please see my review of that, uhh, *worthy* offering). This should have been my first choice but I let a _friend_ talk me into the yellow. This is quite simply the best 18V HD on the market. It's got more torque (495 in/lbs, a little over 40 ft/lbs!!) than many corded drills and as one reviewer already noted, will probably sprain your wrist before it gives up driving. It is a _bit_ on the heavy side but no more than any comparable Bosch or yellow equivalent and the batteries are cheaper to replace and longer lasting than either of those. So far I've used it to build a deck, rennovate two bathrooms, too many woodworking projects to list and I'm still using the original two batteries. I've dropped it numerous times, more than once onto concrete and one time for sure it landed right on the chuck, and it still works/sounds like brand new.

One of the features I really like is the reversible battery pack. They make getting into tighter places (like in between joists) easier. The squeeze buttons on the battery packs do require a bit of finger/thumb strength but they aren't much problem for me and have gotten easier with time. The five year warranty is also nice, I think only Hitachi offers a similar warranty.

If you're a contractor or someone who makes their living with their tools, this should be the only drill you look at. You'll never even look at anything yellow again. If you're a weekend warrior, it may be a bit on the expensive side but look at it this way: you'll only ever have to buy one. ... Read more

Features

• Exclusive 3 - speed all metal transmission
• DC390 cuts 2X4's at 45 degrees in a single pass
• One-year warranty through the Dewalt factory or an authorized service center
• DC385 with keyless blade clamp for quick blade changes
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque

Features

• Professional grade hinges for scaffolding use and storage case included
• Adjusts to stepladder heights of 6, 7, 8, 9, 10 and 11 feet
• Adjusts for extension ladder heights from 13 to 23 feet
• Heavy Duty Type 1A, 300 pound duty rating
• Extra wide flared bottom for firm support

Amazon.com Review

While laser guides for miter saws have been available as aftermarket add-ons for a few years, this saw is one of the first we've seen from a major brand to incorporate lasers in the design of a saw. The saw itself is the same excellent 12-inch compound miter saw Delta has been selling without a laser. It has a powerful 15 amp motor, a sliding fence, integrated dust collection, and a comfortable grip. The tool is solidly constructed and designed to stand up to rigorous professional use. The laser system used on this saw works a little differently than some of the available aftermarket systems. Instead of making a single laser line on the lumber showing where the cut will be, this system projects two lines to show the material that will be removed by the kerf of the saw blade. So, as the saw is beveled, the space between the lines gets wider to accurately reflect the extra material taken out by the blade coming in at an angle. The lasers can be adjusted to match the blade you're working with. We were big fans of Delta's original 12-inch miter saw, and the addition of the twin laser system makes it that much better. --Brian Trinen ... Read more

Features

• 2-year limited warranty on machines, parts, and accessories
• 15 amp motor for powerful cutting
• Horizontal D-handle for more comfortable operation
• Nine positive stops at common angles for quick setup
• Extension wing and sliding fence provide added material support

Reviews (22)

Outstanding Saw
Just completed 40 feet of custom kitchen cabinets using this saw and could not be happier. Setup is fast, easy and clearly described in the manual. The laser sights are easy to line up for any particular blade, and marking stock prior to cutting has become a thing of the past... I simply line the mark on my tape measure on up with the laser mark, remove the tape and cut. No lowering the blade to see how I line up...awesome!

Only two comments for potential purchasers... the lasers tend to pick up sawdust - which reduces their brightness. A shot of compressed air takes care of that problem.

Also, the saw has built-in receptacles for a material hold-down device - which is available on some Delta saws - but is not available as an option on this saw.

Bottom Line: This is a great saw.

Solid and accurate
I bought this saw to replace a starter model Craftsman 10" miter saw that I had for about five years, which was fine for simple cuts but which never could handle a compound cut, no matter how I tried to square it up.

I actually bought a DeWalt 705S before this Delta, but the DeWalt has a serious engineering flaw that revealed itself almost immediately once I started using the saw -- see the reviews on this site (including mine) that address the poorly engineered miter locking system on the DeWalt. After returning the DeWalt, I spent some more time shopping around and reading more extensive reviews. After checking out the saws, I chose this Delta.

The Delta has been a joy. Simply put, it is built like a tank. Still, with aluminum fabrication, it is not noticably heavier than comparable saws.

Mine required some minor adjustments to the positive stops on the 90 degree and 45 degree bevel, but everything else (lasers, blade to fences, etc.) was dead on from the factory.

The action is smooth and has a solid feel to it. Many of the tensions are user adjustable, so you can customize the action to your liking.

The saw has rubber feet that keep it stable even if it isn't bolted down. (Contrast that with the DeWalt 705S, which slides all over the place if you don't mount it.) Delta also has a clever system that allows this saw to be mounted on 2x4s for worksite use.

I replaced the 40T carbide blade that came with the saw with an 80T ATB Freud blade, which does wonderfully. Changing the blade on this saw is a fairly simple matter, requiring the same size wrench to loosen the blade guard and the arbor screw; an adequate wrench is included with the saw. (The DeWalt had Torx screws.) The 40T blade itself makes pretty clean cuts and would probably suffice for framing work, but it's a bit too drastic for trim work.

Changing the blade to one with a marginally thinner kerf required an adjustment to the left laser, which was easy to make. The lasers live up to their billing, painting lines across your stock that show exactly what the blade is going to remove. It makes it easy to line up your marks precisely without doing the old pull-the-blade-down-duck-and-check-the-mark routine.

The extension table and sliding fence were simple to install and are nicely machined. I agree with the reviewer who suggests the clamp for fine work, though; the surface is fairly slick and, as a result, the blade can make the wood slide to the side a bit if you're cutting a 45 degree miter.

The cookie cutter Porter Cables are also nice. But, as it's the same saw, why not take Delta's two-year warranty instead of PC's one-year warranty?

I would buy this saw again in a heartbeat.

And take note that the reviewer who claims below that the product number is misleading apparently does not understand that the 36-255, like the 36-255L, is not a dual bevel compound miter. The laser is the difference. I do note, however, that the "technical details" on this site at the time I'm writing this misstate the plug type. It is a two-pronged plug, not a three-pronged (grounded) plug. The motor also has externally accessible brushes, contrary to the technical details (see p.19 of the manual).

Excellent Saw. Period.
First, I have to say that I'm just SO impressed with this saw! I've used many different brands of saw before, but never a Delta, so I didn't know what to expect. So let's start from the beginning:

Arrival -
Saw came in a VERY sturdy box. We're talking like 1/2" thick cardboard here - well packed and secured. Box acted as temporary stand for about 3 weeks... Everything was in the box and everything was labeled. Nice...! Word of caution - be careful getting the saw out of the box - it weighs almost 70 pounds! The box and the packing were good indications of the quality of the saw...

Setup -
The saw is technically ready to go out of the box, but the left table and fence extensions needed to be attached. If you don't want to use those, then you really are ready to go. But guess what? They actually provide little hand tools for this. Very nice touch.

Alignment -
After attaching the extensions I followed the instructions for aligning the saw. The manual very nicely described every detail of this process. To my surprise, the fence was 90-to-the-table and the blade was both 90 and 45 to-the table OUT OF THE BOX! Factory aligned - very impressive. The lasers were also perfectly aligned to the factory installed blade. So, I technically did NO alignment whatsoever.

Impressions after use -
Blown Away. I bought this saw for the dual purpose of both chopping large stock and trim work. First I chopped some 2x4s. Factory blade is perfect for this. It did a great job -what else can I say? I know cutting 2x4's is exciting...but... I then threw a Freud 96-tooth blade on this, re-aligned the lasers and did 3 rooms of crown flawlessly. The blade change on this is the easiest of any saw I've used. The miter lockdown mechanism is awesome - you'll have to use to understand, too hard to explain, but you'll know what I mean when you do. The twin lasers are SO SWEET. First saw I've used with lasers and man, what a feature. That blade goes right between the lasers, dead on, no guesswork - loved em! Manual was good - clear and well written, though the black-and-white pictures were a little tough to see. They also provided a handy crown angle chart. Finally - the thing is solid. I'm old-school where weight = quality and this thing is just SOLID. Flimsy it is NOT. 70 pounds of American made steel - It's a beautiful thing!

Complaints -
To be fair, I'll try and give a balanced review, though it's hard to find things to gripe about with this saw. First thing, it seems that after about the second room of crown the lasers slowly went out of alignment. This was literally a 10 second adjustment and to be honest I was impressed they stayed aligned that long after the CONSTANT miter and bevel adjustments and the beating I gave the thing.
Second, don't like the positive crown stops. Not really a complaint, but maybe a suggestion - for the serious woodworker these stops get in the way since a corner is RARELY square. If it was close to 90 and I was trying to tap the miter close to the positive stops the saw would fall into them and I would have to start over. Minor, very minor, but I would just remove those positive stops for crown in the next version of the saw cause they're kinda useless.
Third, the saw guard got in the way when I tried to cut 4" Base Molding standing against the fence. The cut went through, but not all the way - it left like 1/8". It went all the way through when I gave it a little jam...but...not something you want to do all the time.
Finally, the lasers have a separate on/off switch. This is nice if you don't want to use the lasers, but it's an extra thing you have to remember to turn off. Maybe the next version can have a timer on it to turn em off after like an hour... yeah, I forgot mine on over night once...I should unplug my power tools you say? BAH!

Conclusion -
This saw ROX. Period. I'm very impressed with every single feature on it. It weighs a ton and cuts like a dream. Everything about it screams ease-of-use and accuracy. I think this saw has single-handedly sold me on the Delta brand. I will be buying more of their products in the future.

Great but not perfect
I bought this saw to replace my Hitachi 10". The first draw back is the Delta only goes to 47 degrees as my hitachi could go out to 60 degrees. After setting up the saw and squaring up the fence I went to set up the lasers and ran into some problems. The hole milled for the left laser was slightly over sized causing the laser to jump and not be true to the blade. I took a center punch and put a couple of punches around the outside of the housing and it tightened right up. Other then these draw backs this is a great saw. For the price you just can not beat it. I still can not believe the Porter Cable (same saw) is so high priced.

You Won¿t Be Disappointed in this One!
The fit and finish of this product are outstanding, and the accuracy is everything that you could want. Other reviewers have addressed the many outstanding qualities of this miter saw, but there are a couple of things I'd like to add.

Not only are the twin lasers a joy to use, they are exceptionally easy to adjust if/when you change blades. You just clamp a hunk of scrap to the table, and cut a shallow kerf (which is to say, don't cut all the way through the board). Then you simply turn on the lasers - which don't require the saw itself to be running - and use an Allen wrench to adjust each laser to match its side of the cut. If only all the tools in my shop were this easy to adjust!

Speaking of clamping to the table, if you place an order with Amazon for this unit, you'll want to think about possibly adding a pair of Delta 36-221 Work Clamps. These fit into holes in the front of the 255L's base and hold your work against the back fence. Don't be thrown off by the fact that the Amazon picture shows them vertically; they actually run horizontal to the table and press the work against the back fence. If you want a vertical clamp to hold your work down against the table, you'll need the Delta 36-218 Miter Saw Clamp (Amazon carries it, too).

One of the other things no one has mentioned is how quiet this saw is. I'm sure the blade is a significant factor, but using both the factory supplied blade, and the Freud 80-Tooth Thin Kerf blade I replaced it with, I noticed that this saw is much quieter than my table saw, radial arm saw, or Skil saw (and yes, Honey, if you're reading this, I do always try to remember to wear my hearing protection like you asked me to). ... Read more

Features

• 1 Year Warranty
• Protection up to 1 acre
• Ideal for large yards, in-ground pool areas and small commercial applications
• Silent and odorless, 24-hour protection against mosquitoes, no-see-ums and other biting insects
• No Flame

Reviews (27)

My two cents
I purchased this unit in June from Home Depot. It took 2 hours to assemble (and I'm pretty good at assembling things). It wouldn't complete the warmup cycle properly so I called their tech support line. The wait wasn't too bad for me but the result was that I had a defective unit. I opted to return it to the store rather than wait for the replacement. I complained to the manager about having wasted two hours and another trip to the store and he knocked off $25 bucks on the second unit. I complained because I had read several reviews from people that have received defective units and I think the dealers need to get a message that customers are not happy with quality of the merchandise from this company. Anyway, second unit has been working fine. It did start catching mosquito right away and I noticed a difference within a few days. It's quite fun to check the trap each day to see how many of the little blood suckers are in there. It is hard to get an accurate estimate because the do bunch up and dehydrate but you can see several still buzzing around inside the net and you can point at them and say - HA! For me, the results are proven by less mosquitoes biting or flying around me so I don't worry about counting. My other complaint about this thing is cost. You're dropping a pretty penny for this unit and then don't forget to add on the cost of the tank and the propane - another $40-$50. The propane lasts for 21 days and then you have to refill the tank. You are also suppose to replace the octenol cartridge which run you $20 for 3 (that's less than a three month supply), plus they tell you to buy CO2 cartridges (3 for $10) and run that through the system every second tank. So, doing the math, say a tank refill every 21 days runs you $15 (and that's cheap right now), $7 every 21 days for octenol, $1.50 for CO2, plus electricity - you're looking at upwards of $25 every 21 days in extra hard costs to keep the thing running. That's $35-$40 a month if you like to break it down that way. With that said, if that doesn't scare you off then give the unit a shot. It does make a difference. I won't say there are no more mosquitoes or no-see-ums but I can regularly go out in the yard for a few minutes and come back inside without any bites when before that would not have been possible. It's just hard for me to believe this company charges so much for this thing and then half of them don't work. That aggravates me, but mosquitoes biting my son aggravates me more.

Problematic
Don't waste your money; unless you have a lot of it to waste. I have the Freedom model and have had it for two seasons. It works great for a couple of months, depending on placement of course if you've read up on these things. But after that it won't start. The first season I was still under warranty and sent it back. They sent me a rebuilt one after about two months and after mosquito season was over. So I lost two months of use. So with my rebuilt one, which now had a clear valve, I was optimistic this season. Deja vu! Same thing happened. It would not start after a couple of months. And now my warranty is up! PS: They won't answer angry emails. Their service is bad as well!

Bad Quality product, 2 year life or less, good when works
I now own three American Biophysics Mosquito Magnets. The oldest one I have is two years old and cost me about $900 to purchase. The two year old unit no longer works, so AB technical support wants to sell me a replacement part for $500 or you can buy a new unit, after returning the Power pack, for $425. What a racket. Build an expensive product that doesn't last more than 2 years and then charge a lot to fix or agree to buy another unit that also has shoddy quality. I agree it catches the mosquitos that they claim when it operates properly. But because of the cost of the units and their limited life I would not recommend this product unless you have a lot of money to burn.

It works in New Hampshire!
I read all of the reviews for a whole year before we invested in this unit. Its been about 4 weeks now, I can't tell you how many ,thousands, of mosquitos and deer flies this unit has grabbed! We love it, it works for us! Read the directions carefully and it will work for you too! It says 4-6 weeks before you see a difference, and we are just starting to be able to go out in the pool at night and not get attacked! Now how can we get rid of our wasps? They are nesting everywhere this season!!

Expensive, but it works
We had been debating the Mosquito Magnet since the summer of 2003. It was a wet spring in New England in 2004 and in May when my mother-in-law drove her car up in midmorning (not peak misquito time) and I saw 2 dozen of the blood suckers throwing themselves against her car hood I started to worry. I looked at my 18 month old son, wondered how he was going to play outside with out being dunked in DEET, and then went online that morning and ordered one.

We have 4+ acres of land, mostly woods so the empty all your standing water advice is not helpful to us. The area around the house is clear and is about 1 acre. We located it on one side of the house, about 10 feet into the woods, which I think helped the catch ratio since misquitos prefer shade.

RESULTS: Within 24 hours I noticed a difference in my front door area. I could be outside during the day with my son and never see a misquito. At dusk I would see some and eventually get bitten, but I wouldn't be swarmed like I had been previously. After 3-4 weeks there was definately a reduction in the local misquito population. Everytime we checked the net there were too many misquitos flying around to count. When we empty the net bag out every 2-3 weeks there is a mass of dead, dried out misquito bodies about the size of my fist. (Impressive, considering a dead misquito really doesn't tak up a lot of space.)

WHAT IT MEANS FOR OUR LIFE: We have two dogs an a child, so the door is always being opened and shut. Last year there was ALWAYS a misquito in the bedroom. Now we get one once a week, maybe. My son has one bite on him now, I'm not even sure he got that in my yard. He can go weeks without a bite. We can sit out on the deck in the evening, an impossibility before. In general I am enjoying my yard much more this summer.

DOWNSIDE: It is expensive, and you have to buy propane & the attractent every 3 weeks. The company is clearly run by a bunch of engineers, and the instructions & set up reflect that. So if you are non-engineerish, get an engineer geek you know over and offer them a 6-pack of beer to set it up. I friend of mine had problems with hers and when she called the company they said she shouldn't use the propane tanks that are from those "swap tank" places, since the lines are not fully purged of air. Air in the line is a frequent cause of problems with the device.

Placement can also be tricky. If you have a big house and are surrounded by breeding grounds you almost need two for both sides of the house, but we do make do with just one. We did have to move it once to get the best coverage. It obviously isn't cheap, but I haven't found a better alternative. ... Read more

Amazon.com Review

This Porter-Cable 18-gauge, 2-inch brad nailer is a compact, comfortable-to-carry unit that might not offer quite as many extras as other (more expensive) units, but it's very reliable and does its job well. This nailer shoots standard brads from 3/4 to 2 inches long and has an anodized magazine with a reload indicator. The die-cast aluminum body is lightweight but still very strong, and the handle is comfortable to hold, even over long periods of time. The quick-release nosepiece lets you clear jams quickly and easily. Other features include a sequential fire trigger, a safety that's located behind the driver guide for driving brads in tight spaces, an easy-to-adjust depth guide, a directional exhaust port, and a removable rubber nose. The kit comes with a 1/4-inch male coupler with dust cover, a rugged plastic carrying case, oil, and 1,000 brads. --Jonathon Tudor ... Read more

Features

• One year warranty/30 day performance certification
• Uses standard 18 gauge brad nails from 3/4 to 2 inches long
• Adjustable exhaust port and depth-of-drive
• Removable non-marring tip to protect delicate work
• Quick-release nosepiece for fast clearing of jams

Reviews (29)

Call Me Quick Draw Magraw!!
Hello All,

I'm so thrilled with this new brad nailer that, I'm telling everyone about it. I purchased this unit as a replacement for an older model Campbell Hausfeld brad nailer. What I LOVE about this unit is, that it has the ability to ADJUST the brad depth. For many moons my only means of doing this with my Campbell Hausfeld unit, was to drop the air pressure.(What a royal PITA)I also purchased brads ranging in length from 5/8"-2" to test the gun with.

The BN200A shot all the above brads without a catch, not a single misfire nor any problems with drifting brad depths. I can't say enough good things about this nailer!! If you're looking for a great little brad nailer at a good price, then look no further! I truly believe that you too will find the weight and quality construction of this brad nailer outstanding.

Sweet!
I've only used one other brad nailer and it was as flawless in functionality as this one, but the PC has more features that make it worth the price.
I really like the nail-depth setting, it's a LOT nicer than adjusting air pressure(yuck!!) I also like the swiveling exhaust port, I always seem to get in a position that I get an oily blast of air in my face before I remember to move the port somewhere else.
I haven't had a single problem with it, no jams or misfires.
Very nice tool!

As far as the fit and finish, this guy is top notch. It feel solidly built and very well balanced.

I actually like that this only has a single-fire trigger. I can't see needing to use a brad nailer at the pace of one of the bigger framers with a bump trigger. One is available at extra cost if you find a need, though.

Works well, great price, better than Senco FP18
I was looking for a 2" brad nailer to do wood trim and help with furniture building. I wanted an 18 gauge for the tiny hole that it makes and virtually non-existent wood splitting compared to a 15 or 16 gauge nailer. 2" is enough to go through the trim and drywall and bite into the wall stud.

I originally bought a Senco FP18 brad nailer based on Senco's reputation and the fact that it went on sale for a great price at the local Menards. However, it did not set brads very deep in the wood - barely 1/32" below the surface, any size nail, any type of wood, at 120 psi.

The Senco went back, and I ordered this Porter Cable from Amazon with the free shipping. Ordered Sunday night, arrived Thursday. This nailer has a very solid feel and does an excellent job setting the brads deeply into any wood, including 2" brads into solid red oak. It works fine off of 90 psi.

I am very happy with this unit, and with Amazon's shipping. I've ordered lots of various things from Amazon and always have great results.

A good little brad nailer so far
One of my coworkers recently bought a reconditioned Porter Cable BN200A because the Senco SLP20 at work wouldn't countersink brads anymore. The first Porter Cable brad nailer he bought was defective (misfired), so he exchanged it for one that worked properly. We've been using the Porter Cable for several weeks now, and it has held up nicely.

We've mainly used it on quartersawn oak, particularly the smaller pieces of trim. The adjustable depth of drive functions as expected, and the nailer has had adequate power. It countersinks well and leaves only a small hole in the wood. The only time I've experienced difficulties with it was when I tried to fasten trim to a plaster-coated brick wall in an old house. The brads couldn't penetrate the brick behind the plaster. However, this isn't a shortcoming of the nailer since I couldn't even get my 15-gauge Hitachi finish nailer to drive through the brick without pretzelling.

I like the short height of this brad nailer--it came in handy when attaching trim behind a cast iron radiator where there wasn't much room.

If you're trying to decide between buying a 15-gauge or 18-gauge nailer, perhaps this will help. In my opinion, the 15-gauge nailer is more versatile because 1) it can fire longer nails (good for attaching crown molding, door casing, baseboards and some framing applications); 2) it can be used for structural applications like setting prehung windows & doors; 3) the 15-gauge nails are more difficult to bend so they have better success when firing into hard or dense surfaces (plaster & lath, plaster over mortar, soft brick, thick MDF, etc.); 4) angled 15-gauge finish nailers can fit into some spaces better than straight brad nailers. However, the 18-gauge brad nailer excels in firing into small diameter trim pieces (door jambs, shoe base, etc.) and in situations where the size of the nail hole is more important than the strength or length of the nail. Although some 18-gauge brad nailers can fire up to 2 inch long brads, the longer brad lengths are so thin that they sometimes have difficulty penetrating dense materials without pretzelling all over the place. A 15-gauge nail will generally penetrate farther and hold better.

I gave the Porter Cable 4 stars (instead of 5) because the first one my coworker bought was defective.

A litte gem, well engineered with consistent results!
I tried the Porter Cable BN200A and the Bostitch BT200K. The PC worked flawlessly, felt more solid, and just generally outperformed the Bostitch. This surprised me since I own other Bostitch nailers and am quite satisfied with them. The Bostitch would not throw the nails consistently slowing down my work flow considerably. Additionally the PC seems to be able to tolerate different types of nails more easily. All in all the PC is just simply better. Spend slightly more and save yourself time and trouble => Buy the Porter Cable. ... Read more

Amazon.com Review

Delta's 28-206 band saw is a smart buy for the serious hobbyist interested in curve cutting and light resawing. The 1-horsepower 120-volt motor delivers smooth, quiet, reliable power, while the saw's nine-spoke wheels deliver more accurate tension on the blade, reducing vibration. The heavy cast-iron trunnions likewise minimize vibration to the blade. A closed base reduces noise and keeps dust off the motor. For curve cutting, the large 16-by-16-inch table provides excellent support for workpieces, and tilts to 45 degrees for bevel cuts. The saw handles stock up to 6-1/4 inches thick with a throat capacity (the distance from frame to blade) of 13-3/4 inches. The lower blade guide on this saw rests only 3/4 inch below the table, which minimizes the deflection in the blade and provides cleaner cuts. When the saw is not in use, the tension-release lever extends the life of the blade. It also makes switching blades quick and easy. The saw comes equipped with a 4-inch dust port, a smart feature you won't find on other band saws on the market today. Package includes 3/4-inch woodcutting blade and instruction manual. --Jon Groebner ... Read more

Features

• 2 year limited warranty on machines, parts, and accessories
• 1-horsepower induction motor provides cool, quiet power
• Quick-release tension lever
• 9 spoke computer balanced wheels eliminate vibration under load
• Blade moves at 3,000 surface feet per minute for efficient cutting

Reviews (9)

Good value for the money
I bought the 28-206 despite the fairly negative reviews here
because I liked the lower guide design, the quick tension release feature, and the integrated dust port. I figured I
could make it work better with the suggestions of previous
reviewers.

Most of the saw's strengths and weakness were already given
in previous reviews. I'll say that delta has been very
responsive in fixing my problems. The sloppy lower guide
can be fixed by replacing the rail with the rail for the
US made saw (part number 426-02-004-0001), the US made rails are slightly thicker and wider,
and completely eliminates the slop. On paper the center of
mount holes are about 1/16" off, but in practice mine went in without any problem.

The vibration problem experienced by everyone is mostly due
to the flexing in the sheet metal stand. I bolted some
1" angle iron under the stand that help a great deal. As
long as I use a link-belt, the
saw passes the nickel test most of the time while running
and cutting, but the nickel falls over on start and stop.
I plan to add more angle-iron reinforcement in the future
to eliminate the remaining flex.

My remaining problem is that my saw's driven pulley came
dented, and it has been back-ordered since January. I work around
it by using only the low speed since the low speed side of
the pulley is OK. The saw cuts really well and the motor
has power to spare when resawing 4-5" cherry. Someday I'll
add a riser block and I'll know how well the motor handles
thicker wood.

The only real downside to this saw is that the left tilt
is advertised at 3 degrees, I got about 7 degrees in practice,
but the small amount of tilt makes it tricky when using the
saw to cut dovetails.

If you want a perfect saw out of the box, skip this one
and look at other brands or delta's US made 14". If you
don't mind doing some work yourself, this is an inexpensive
saw that can be made into a very good saw.

runs good, but hard to assemble
Well, I haven't got a chance to use the saw alot yet. It seems to run great, but the assembly was challenging. The pulleys would not align. I called customer service. A tech called back about an hour later. He said to reverse one of the pulleys. This would certainly solve the alignment problem. It didn't. I had to drill out the holes in the base to form slots. I could then slide the saw over far enough for better alignment. R&D might want to provide these slots. It might have prevented two hours of cutting up a brand new saw base.

Not worth the money
I bought this Delta bandsaw 5 months ago, and have not cut a piece of wood yet! The machine vibrated so bad that I was scared to use it.

I spent $$ on aftermarket parts to cut down on vibration. I hired a local machinist to make the stand more sturdy. I phoned Customer Service 5 times. They were friendly and sent me several new parts. The local Delta Serviceman has the saw now. After 6 weeks of work, he just called to tell me he cannot fix the vibration and has given up trying.

I do not recommend this saw.

Great Value, excellent saw with some work.
First, allow me to say that, in my opinion, this is by far the best value band saw in its class. Where else could you find a machine with these specifications and (most of) Delta's reputation for quality and service? After working out some of this new model's wrinkles, you can own a very versatile saw with a large 16" table, a quick tension release, and a good amount of power. But, for your savings, be prepared to do a little fussing to get everything just right with this saw.

Let me tell you about my experiences, and most importantly Delta's excellent response to some picky little problems I encountered. I can tell you that I am a very fussy guy and know quality when I encounter it, and will settle for nothing less than "how things should be." When I discovered this saw was totally manufactured in China, I decided I would hold Delta's feet to the fire and demand the same level of quality found in their U.S. made saws, and I think I'm close.

I have been in the machine tool business for 28 years, selling metal working machines, and I have seen the good, the bad and the ugly. This saw is not bad and can be made good, very good with your effort and persistence. If you are not one to take on such challenges, you can purchase less saw for equal money, or plan to pay quite a bit more for something with equal specifications and fewer rough edges; Perhaps as much as $300-$400 more. For me, woodworking is a hobby and I would like to put that much money elsewhere.

The Good:

In most ways this is a typical Delta cabinet band saw. The 1 H.P. motor has sufficient power, the unit is beefy and most Delta parts and accessories are interchangeable.

The cabinet doors are on hinges, and can be easily opened; quite convenient.

The table is larger than their other 14" band saws.

The blade tension release lever is something I would never want to live without again, never. It's so convenient and would normally cost an additional $150 or so.

The saw is a two-speed unit.

The height adjustment is very accurate and doesn't require readjustment of the guides when the elevation is changed.

The Bad:

The lower blade support assembly is sloppy because the bar it connects to is a poorly, undersized and pretzel-shaped piece of sheared hot rolled steel.

The bottom, hinged door on mine was tight and would bind up, sometimes even popping open on its own.

It's hard (impossible in my case) to perfectly align the motor with the pulley on the saw, but with some fussing around, you can get it close enough.

The cast iron parts are not quite as refined as the American units, but acceptable.
The height adjuster is a bit stiff to move up and down, but I presume Delta wants it to be this way so it won't fall down and pinch my delicate fingers. I noticed it has a rubber surface inside its bore for better grip. With time it will probably work a little easier. Silicon lubricant might also probably help.

The saw is not quite as vibration-free as it could be, and Delta is working on this with me, sending me some new pulleys and an upper band wheel. I think the top band wheel is perhaps a bit out of round or out of balance. When I run the saw without a blade, it's quite smooth. I am confident I can resolve the very slight vibration I am experiencing. Also, to be fair to Delta, my saw is on a mobile stand, not the best base to minimize vibration, and I do have the height extension block installed, too.

Some comments about Delta's excellent service:

When I pointed out the problem with the lower band cover's hinge, Delta overnighted a new cover. It was there the very next day.

When I advised them of the sloppy lower blade guide assembly, they got with their engineering group to confirm my observation, and machined a high precision part that now works like a dream. I trust if you call them they will have this part (now) in stock. The American part won't work only because the holes are spaced differently, but the bar is the same dimensionally. It's a little tricky to install, but only about a 20-minute job.

As I said, I am confident I will be able to resolve the slight vibration problem I am experiencing. It's not really enough to worry about, but like I said, I will hold them to my standards.

Conclusion:

If you don't mind purchasing a Chinese built machine from an American company, and you are willing to work out or accept some of the rough edges, go for it. It's a great value, all things considered. The only thing I can imagine that may be a future problem is the Chinese built motor. It looks good, but who knows. Everything else should last as long as any other Delta 14" band saw. Hope this is a helpful review.

Bandsaw Needs
Ordered this saw as a replacement for a smaller bandsaw. Easy to assemble but you'll need a second person for safety. The quick tensioner is a nice touch and the fit and finish are adequate. The only negative is that the two wheels were not co-planer as delivered but the addition of a 5/8" shim washer took care of that issue. I always test my power tools by removing the blades and checking the runout and no load vibration. This tool is adequate but not outstanding. I replace the drive belt with a "link" belt but that didn't help much. I purchased the Delta because I always buy "made in USA" if possible. Guess what: made in China. If I had known that I would have purchased the Jet 14 bandsaw. Overall the Delta is a good solid bandsaw. When I finally find a permanent spot for it I will bolt it to the shop floor. ... Read more

Features

• Includes impact driver, (2) 18V XR+TM PACK extended run-time battery packs, 1-hour charger, and a heavy-duty kit box
• 1,170 in./lbs. of maximum torque for tightening and loosening large nuts and bolts and driving fasteners
• Only 6-1/2 inches long to get you into tighter spots
• Heavy-duty impact mechanism provides the power while delivering less kickback
• Heavy-duty magnesium gear case and all-metal transmission for job site durability

Reviews (2)

Loads of power, but is that enough to make the big leage?
We use this driver for running in ½ x 12 lag bolts through pilings. This putts a lot of stress on a driver. The DeWalt has more then enough power to handle this and all lesser tasks. I have used several hammer drivers and hammer drills in my business, this is truly the undisputed "Power King"; however, after running hundreds of lags and screws I encountered a few shortcomings with the DeWalt:\

1. On two of these drivers the anvil (hammer thingy) inside stripped out in less then 3 months. On the plus side, DeWalt replaced them, no questions asked.

2. It a nightmare to get inside and replace the brushes on the work site. Combine that with the reluctance of our rep. to even get the brushes addes up to sending them in for R&R (repair and rebuild) at the cyclic rate. Time = money. I still don't know if the brushes can be replaced, how to do it, or if that is even the problem. I suspect it is due to a small amount of graphite looking dust around the air exhaust vents after long use.

All in all, not bad for hundreds of BIG lags, but to put it into perspective, we also use Makita 24 volt hammer drivers. These have run thousands of big lags with no problems at all! The Makita brushes are a few bucks for a pack and can be replaced in a minute.
My bottom line is: Get the DeWalt for lower production work that needs lots of power, but if you have your driver turning day on stay on, you might want to consider a Makita hammer driver in the 18 - 24 volt range.

More than i expected!
I own a few Dewalt tools so i have a lot of experience with the
quality of the brand and I am more than impressed with this impact drill. It drives self tappers in 3/16" steal with no problem. If your in the market for a light weight
impact with lots of power this is the ticket. ... Read more

Amazon.com Review

If you're like us, you've crammed more tools into your workshop than can really fit. Luckily, an HTC universal mobile base (or two) can make a world of difference. The base is sturdy and easy to assemble, plus--unlike any other mobile base on the market--it adjusts to fit virtually any large woodworking machine, forming squares from 12 by 12 to 36 by 36 inches and rectangles as big as 20 by 52 inches. Holes at 1-inch increments let you choose any shape in between, and wheels at all four corners make it easy to maneuver. Roll one tool in; roll another tool out. Moving equipment around a crowded shop has never been this easy. --Jon Groebner ... Read more

Features

• Lifetime warranty
• Four wheels for well-balanced performance
• Side rails come with holes spaced every inch
• Can hold shop tools weighing over 400 pounds
• Easy to unlock and move

Reviews (94)

FIVE STARS FOR VALUE!
If a tool is to be judged on it's utility then this is a winner. What makes this base so great is that it does what it's supposed to do, does it well, and sells for around fifty bucks.

My shop is so small Hennie Youngman could do a whole routine around it. I don't have the luxury of thousands of square feet of space to plant work stations and production tools. So, I rely on putting everything on wheels to keep it out of the way untill I need it. I made my own untill I discovered the HTC2000 mobile base.

I ordered one for my jointer and another for my table saw. My jointer is now a dream come true! The large wheels track easily and smoothly and it sets down firmly. The only drawback was that the front was higher than the back but that is an easy fix with a spacer or adjusting up your machines leveling feet.

Oddly enough I did not have this problem on the second one I ordered for the table saw. That on is so level you could set grade with it. For the life of me I can't figure the difference but who cares? The only downside I noticed on the one for the table saw was that my saw may be a little heavy for it. I have an old, big Craftsman with a custom made T-Square fence. It rolls very nicely but the cam levers for raising and lowering seem to strain a little in the lift mode. If you are going to move larger machinery I would suggest contacting the company regarding their custom made program.

Overall, if you ever want a stationary machine to have any portability you can't go wrong with this product. And at this price, you can afford a little custom tuning to get exactly what you want.

HTC HTC2000 Universal Mobile Base Review
This is the third mobile base that I have purchased and it is the first one from HTC. My other two units are the Delta mobile base in which you must provide the hardwood cross members into their provided corners. These two units support my Jet Contractors saw and my Jet 14" CS Band Saw. The HTC unit is for my Jet 6" CS Jointer. Overall the unit assembled easily and holds the Jointer very well. My biggest complaint with the unit is that it does not provide the movement flexibility that my other units do. I have a small workshop and need to swing the units around easily. The Delta base has a single wheel centered on one side of the frame and it can pivot very easily. The HTC unit with its two pivot wheel design does not permit easy movement. As I continue to expand my workshop I would not purchase this style again with the two wheels.

Excellent product, easy assembly, great price...
So, who has the free wall space in either workshop or garage to just leave a bandsaw, drill press, table saw, or router table in one place without banging the materials from your project into a nearby cabinet or storage shelf? I sure didn't. Believe me, dragging the drill press or band saw into the middle of the garage was never as much fun as it seemed ;-) Sears has a mobile base exactly like this one, but for $20 more. I bought three, and they arrived super fast in great shape. All parts accounted for(!), and easy to assemble. I'd recommend attaching the base to the tool with some bolts, though (not included). Leveling is easy to do, the base is quite stable, and the rolling action is very smooth. I thought it would be hard to justify the cost, but after buying and mounting them, I wouldn't go back. Excellent product...a definite necessity for large shop tools.

HTC2000 Price Increase
July 13, 2004 I bought a HTC2000 at $43.00 from Amazon.com. July 17, 2004 (3 days later) Amazon.com increased the price by (28.3%) ($16.99) to $59.99 each. Ouch! The price increase of steel did not jump that high.

It's a troublsome erector set
Now I believe I'm in the minority based on these reviews I see. Let me tell you my experience and use your own judgement, it's fine to have a differing opinion.
I used this for my Jet contractor saw, not that time consuming to put together but more so than the one piece unit I replaced it with.
Trying to lock it steady on those rubber feet took more time to do than putting it together. Then, If I move the saw to use my router table I have to readajust it since my cement floor only looks completely smooth. so there's some back and forth issue with making the thing stable when it's moved and repositioned.
I'm not talking about cobblestone imperfection, it's subdle variations in concrete that make 4 wheels rock back and forth ever so slightly if they're not just right. Those 2 rubber feet have to take the weight of the saw and hold it steady or else if you push something heavy there's a chance the saw will move during your pushing. I don't want to have to follow my saw back and forth with shim stock. The nut and bolt type adjustment is tedious. I think Shop Fox has a heavier universal base that uses 2 feet but with large knob adjusters and also a thicker frame.
3 wheels always stay on the ground regardless of the slight imperfection which is what I've found on the one piece mobile base that's made specifically for individual equipment. I just put the one piece base on and forget it. Rolling circles to my hearts content around like a crazy merry-go-round. Stop and cut or route and back to where it once was, no problem. Cost twice as much, saved more than that cursing this univeral base.
I'm going to put this mobile base under my drill press which doesn't have to move, but only if it has too move, it will then be able too. I actually think the slight height increase would be worth it as well. ... Read more

Features

• Includes (2) Ni-MH batteries, multi-voltage charger and case
• Two piece D-31 motor for easy serviceability
• All metal gear transmission for smooth, efficient power
• Shift lock drive instantly changes from drill to driver
• 2.6 Ah Ni-MH batteries for greater capacity and longer run time

Reviews (2)

Excellent drill!
I was recently forced into the market for a new drill when my old 14 volt Dewalt drill/driver finally ended its long career. I needed a drill that could be used for work every day and also came with batteries that would not run out of juice multiple times in one project. I have always believed in Dewalt, but with all the reviews in magazines (and friends) being negative on the new line of drills, I decided to do my research. I ended up choosing between Makita and the new Ridgid brands of drills. I bought a Ridgid drill from my local home center due to the fact that they did not carry the 18v Makita. After one day of use, I noticed a spark coming out the side of the drill due to the brushes in the engine. The drill performed very well even with the sparks but still had two additional flaws: battery life and weight. I went on Amazon as soon as I returned home to look into Makita drills. All of my saws and screw guns are Makita and I have never once had a problem. To my delight, Amazon not only had the drill on sale but it also came with a quality tool belt, work gloves, Amazon discount and a Makita rebate!
The bottom line is simply that this Makita is better made than the other drills. It has externally removable brushes that no other drill, at least that I know of offers. The drill is much lighter than others and the batteries can't be matched by anyone but Panasonic. This drill is just an amazing value, especially on Amazon. I would recommend this drill to anyone who is indecisive on what brand to buy for professional use.

Excellent Drill for the professional or DIY guy
This is one of the Best Drills I have ever used...HEAVY DUTY...WELL BALANCED...STONG MOTOR....AWSOME BATTERIES...and to top it off...AMAZON HAD THE BEST DEAL in town on this model.
For $174.99...I got the 18V Mforce Drill,Case,Charger,2 batteries, a $75.00 Tool Belt, $40.00 Work Gloves, a $20.00 coupon on my next Makita purchase.

WHAT A DEAL....I highly recommend this drill to any Professional or DIY GUY. ... Read more

Product Description

At only 39-pounds and supporting up to 500-pounds, the new Bosch TracRac® T3B portable miter saw stand is the perfect addition to any miter saw system. The stand boasts 20-ft. of total outfeed coverage and 12-inch wide extensions for extra support. Unlike any other stand, the T3B can fold down without removing the saw and be rolled on its integrated rubber wheels form job to job. Combined with the T3B's universal saw mounting system, anyone can appreciate total convenience. An adjustable telescoping/leveling leg adapts the stand to environments with up to 6-inches ground variance, while cam-lock bases maximize outfeed to each side by allowing the entire saw to slide left or right as needed for maximum coverage. Saw not included. ... Read more

Features

• Robust aluminum construction withstands 500 pounds of force
• 20 feet of outfeed coverage
• Solid rubber wheels for easy transport
• Adjustable telescoping leg for uneven surfaces
• Cam-Lock bases forchanging saws easy