Amazon.com Review

This professional-grade construction stapler is built to handle all but the toughest 16-gauge applications. The industry ranks this model's power-to-weight ratio as best in its class. We found it to be fast and powerful, capable of driving up to 16 1- to 2-inch staples a second. In fact, this model can handle eight different staple sizes. It has a top-loading, easy-release feed system with reload indicator, and jambs are easily cleared. Other worthwhile features include a mechanical countersink, narrow nose, and adjustable exhaust. Senco designed this stapler to be reliable, using 30% less parts than the competition. Among its many applications are sheathing, furniture frames, wood shingles, and decking. --Tom Kasperson ... Read more

Features

• For sheathing, subflooring, decking, fascia & soffit, lathing and more
• Versatile stapler has the best power-to-weight ratio in its class
• Designed with 30% fewer parts & 15% more power than the competition
• Drives 16 gauge staples 1 in. to 2 in.
• Adjustable depth-of-drive

Reviews (3)

SHOOTS LIKE AN UZI
I RECEINTLEY BOUGHT THIS GUN FOR NAILING OFF PLYWOOD. I COULDN`T BELIEVE THE SPEED IT WOULD SPIT OUT THE STAPLES; IT SOUNDED LIKE AN UZI. THIS IS MY FAVORITE AIRTOOL I HAVE BY FAR! I RECOMEND THIS GUN TO EVERY HOMEBUILDER!

Does it all
Just bought a Senco SNS65 to do the siding, sheathing, soffit, facia, etc. on the house I am remodeling. It works great, plenty of power for both 1" and 2" staples. I'm using 1" rough cut siding on the log house and it drives through and flush every time. I'm glad I bought it.

Top Of The Line
SENCO has been around a long time and it shows, it's a top of the line product. Well made, tough construction, lightweight, comfort plus, makes this product worth the money.It's depenability and craftmanship make the investment worthwhile. ... Read more

Amazon.com Review

Porter-Cable's 3-by-21-inch belt sander features an all-metal housingthat gives the tool a solid feel, makes it tough to damage, and lets you sandeffectively without having to press down. This sander also does a great job ofkeeping belts centered, a terrific bonus because there's nothing morefrustrating that having to constantly re-center a belt. According toPorter-Cable, the all-metal housing accounts for the centered placement of the belts.The sander remains rigid, even during heavy use, and the metal helps dissipateheat, keeping the belt relatively cool and in place.

This sander also has a variable-speed dial that lets you match the speed of thebelt with the application, so you can speed up for aggressive removal or dialdown for more precision. We really like the 360-degree adjustable top dustnozzle--a feature you won't find on many belt sanders--because it lets you pivotthe dust bag (or hose if you're hooked up to a dust vac), a huge conveniencewhen sanding in corners or along edges. And, lastly, this is a quietsander, thanks both to Porter-Cable's newly designed gear system, which meshesmore accurately, and to the sander's serpentine drive belt, which makesconsiderably less noise than a more common cog system. For a belt sander, thistool is surprisingly easy on the ears, and that's a very good thing. --JonGroebner ... Read more

Features

• One-year warranty/30 day performance certification
• Powerful sanding action
• Variable-speed dial
• Belt & gear drive
• Designed for flush sanding

Reviews (30)

Terrific, Powerful Sander
After purchasing -- and returning -- the Makita 3X18 belt sander, I bought the Porter-Cable 352VS (eee my review of the Makita). What a difference!

This sander is powerful. I sanded three layers of old paint off a door in about 1/2 hr. The body is constructed of metal, giving it a nice solid feel. When sanding, you can simply glide the sander back and forth, without having to push down at all. Porter-Cable came up with a design that gives you a lot of power, but at the same time control over that power. This is what a belt sander SHOULD be like.

The position of the front handle makes sense -- it is up higher than the front of the machine, so you get a good position relative to the sanding surface. The handle is also designed to give you a lot to grab onto.

The dust bag is designed well. You can swivel it in any direction to get it out of the way while you're sanding, and it holds the dust without spilling until you're ready to empty it out. Also, it does a fair job collecting the dust, but you should never expect any dust-bag system to be perfect.

The meachinism for loading and unloading sander belts is very good. It is easy to place the belt in the sander and then tighten it up securely.

The tracking system really holds the sander belt in place. I placed the belt on the sander, held it upside-down, running the sander until the belt no longer shifted left or right. Then I began sanding, and for the whole time I worked, the belt did not move from center at all. Because the housing is made of metal, even if the belt DID move, it would not damage the sander, as it would on machines with plastic bodies.

All told, this sander is a great combination of power and ease of use.

PS: The 3X21 sander belts that Porter-Cable makes (the purple ones) are excellent.

serviceman
My old belt sander stop working. I went to sears and purchased their 8.8amp belt sander. I used it for about 5 minutes and found it really did not have the power I need. So I took it back to Sears. Then I order the porta cable 352vs from Amazon. As soon as I had taken the sander out of the box I could feel a big difference. I plug the sander in and used it. It has a lot of power. I am very pleased with it. I was really shocked to feel how much more power the porta cable has over the sears craftsman. There is no question about it ,if you need a belt sander go buy the porta cable.

Good Sander, But...
I've had my PC 352vs for about 5 years, and I'd agree with most of the reviews I've read here. Plenty of power, good balance, well-made, but the dust pick-up port constantly gets clogged, and the dust bag and power cord are not positioned as well as they could be.

I've found that I can unclog the pick-up port using a blast of compressed air.

After 5 years, I wore out the drive belt and the platen was also cracking slightly, which is the only repairs I've done. Within 2 weeks of replacing the drive belt, though, I trashed the new belt when I caught the power cord in the sander and jammed the belt to a stop. (Not the sander's fault - mine).

Overall, a good, well-made (and made in USA) sander that should last a long time.

I don't really like this sander much
I have a lot of Porter-Cable tools, my dad has them too. Therefore I thought this would be a good inexpensive sander.
It's heavy which is good, it tracks well which is good, I like variable speed... BUT!
It's not balanced well. Left unto it's own weight it will favor one side over the other and sand unevenly unless you get a feel for which side needs a little more pressure. Use finer paper and take it easy. I started to develope a feel for it but never really enjoyed using it.
I now use a very old Porter-Cable 504 given to me by my dad. It's been a joy to use! $500+ new gulp! Mine's old, has been serviced and will live on.
If I were looking for a belt sander and didn't want the 504 due to preference, price, or going the used route, and I were trying to get something good within reason, I'd try a higher end PC or check another brand. I think DeWalt, or Bosch have settled those balance issues. You can feel it in your hands and hold it gently on a flat surface get an idea as to what may stay flat when the power is on.

Disappointed !!..
I bought this and was expecting a lot from sander of this quality. Well, It is really 8AMP and not 7AMP sander. I am not sure how genuine these reviews are but I had go back to random orbit sander and put this sander back in box on top shelf as I found it useless for finishing work. I would rather spent money on random orbit sander and get quality work done in short time. ... Read more

Features

• Charger included recharges battery pack in as little as 3 hours
• Easily clears debris from hard surfaces
• 2-18.0V rechargeable NiCad battery packs provide plenty of run-time
• 120 mph air speed for efficient material removal
• Large switch for easy On/Off

Reviews (2)

Quick and light, just like a broom
It's a great little product for those light jobs like blowing dirt and leaves off the patio or grass off the sidewalk after the lawn is mowed.
It's extremely easy to handle, much lighter than the large, corded "Hog" that I also own.
This product should be used to supplement, not replace, the larger, more powerful corded blower.
I found battery changing very simple and less difficult than the cordless weed trimmer I have (also a B&B product).
It was nice to not have to fuss with the 100-foot cord just to "sweep" some grass trimming. Quick and easy are the operative words.

Pretty good - but don't get rid of your corded blower
I just bought the B&D NS118 blower along with the NST2018 cordless string trimmer. I have a corner lot with long parkways and a lot of sidewalk footage, and have grown tired of dealing with up to 175 feet of extension cables for my corded trimmer and blower. I've had a nice battery-powered mower for several years, and felt it was time to go all cordless. This new pair of tools seemed promising, particularly because of the removable battery design.

After only one use I can say I'm reasonably satisfied, but not fully sold.

Handling: This is probably one of the lightest blowers available and is easy to handle. But the way the nozzle attaches is not good at all. It's difficult to remove, and the design invites finger accidents.

Power: The blower is nowhere near as powerful as my corded one. B&D refers to this as a "broom" and that's an appropriate description. It works well on surfaces where you might otherwise use a push broom. It's not good at getting leaves out of grass or flowerbeds. But in a way, the lower airflow can be better for sweeping than a corded blower. My corded one, even at its low setting, can often send debris flying all over the place. This one calmly moves stuff where you want it to go.

Battery: The batteries are compact. The blower comes with two of them, and I needed them both to complete one job. I guess I'm okay with this approach. It makes sense to lug around only as much weight as is necessary rather than carry a much heavier battery the whole time. If you buy this along with a trimmer as I did, you'll have four batteries and two chargers available for swapping. And if you happen to have a FireStorm 18v drill, you can apparently swap batteries with that system as well.

Quality: Build quality seems similar to most B&D stuff, meaning it will probably work for a few years.

Overall: Going cordless does simplify my work and save me time, but this tool isn't appropriate for all cleanup jobs. I have a month to make up my mind about keeping it. But even if it passes muster, I suspect I'll want to hang onto my corded blower for the occasional heavy job. ... Read more

Amazon.com Review

For the price, Makita's 10-inch portable table saw is a solid choice for the job site. The 15 amp motor packs plenty of power, and with a 3-9/16-cut capacity, this saw will rip four-by material on a single pass. This saw also has an electric brake, so adjustments between cuts are both safer and quicker to make. The table's a good size, too: 27 by 22 inches. We also really like the saw's new cam-lock rip fence, which is much easier to adjust than double-locking designs. The bevel adjust has a pretty good rack-and-pinion design (metal, admittedly, would be better). All in all, this saw strikes a nice balance between weight (only 40 pounds) and vibration (minimal). Simply put, the Makita 2703 is a solid saw, better for the job site (quick, powerful, lightweight) than the home shop. For the shop, we'd recommend a saw with a more accurate fence. --Jon Groebner ... Read more

Features

• One-year warranty
• Powerful 15-amp motor handles any material
• 27-by-22-inch table provides large support surface for work pieces
• Cam-locking rip fence sets quickly
• Lightweight at only 40 pounds--easily portable

Reviews (30)

depends what you want to do with it
This is not a bad saw...depending what you want to do with it. i struggled using it in my shop as my woodworking saw, for several reasons:1, what is the deal with the miter slot? it is undersized and basically useless. 2, the fence is lacking. it is ok for rough cutting, but hard(or impossible) to get any kind of accuracy out of. 3, i wish it had soft start like the 10" sliding compound miter. the saw practically jumps off the stand when you start it.
Now, if you want a lightweight, powerhouse to carry on the jobsite, this is a great choice. ripping 2X and plywood is what this saw is for. the table is too small for full sheets and lacks the capacity to rip 24". .... but man it hawgs through the 2X material.
i chose not to spend the money on a rosseau stand to increase the capacity. instead i just got a delta contractors for my shop and will use this makita for the job site. i thought about selling it, but it will be alot easier to haul the mak to the jobsite instead of my 300lb contractors saw.
so there you have it. if it meets your needs go with it. if you want a saw that will do a little of both, i recommend the porter cable.

Light, powerful, imprecise, non-standard
Strong saw, and light, and with the Porta Table has a nice fence and will cut very wide. However, the arbor is too short for dado work as large as I'd like and the non-standard miter slots limit the amount of after market stuff you can use with the saw. I'm looking to sell mine and upgrade to a more versatile saw.

If the fence were better . . .
This is a great saw in many ways. It's light, but sturdy. It's set up perfectly right out of the box, and offers easy adjustments to fine tune its performance. It's perfect to haul to jobsites, or just pull out of the garage on weekends. No other lightweight table saw is so solid, durable, and powerful.

So the fence really is a pity. It's easy to adjust and lock, but it doesn't square automatically. You have to realign it every time you reset it. And it doesn't even hold a setting, unless you clamp it in place with huge c-clamps. So it's not really suitable for any kind of fine work unless you replace the fence. Which isn't easy, because it's not a standard size, and you have to fabricate brackets. Which isn't really that difficult, but for about the same money, Ryobe makes a saw with a great fence. It's not as powerful or durable as the Makita, but since if I were doing it all again, I don't think I would have bought this saw.

Terribly inaccurate waste of money
I have been using this saw for 2 years as an on site stair builder after my employer purchased this saw against my, and my coworkers, recomendations. This saw is cheaper than the DeWalt and the Bosch, and it shows. The miter gauge was used once and found to be useless. The fence is a joke, getting it square to the blade requires a measurement from both ends of the blade, keeping it square requires no pressure against the fence. For cuts that require accuracy, more often than not, I resort to clamping a guide board to the table to ensure that it will slide, or flex, halfway through the cut. If you are looking for quality and accuracy spend the extra dough and buy a DeWalt or Bosch, the time and aggravation saved is well worth the money spent.

upsetting
Ive been a self employed for 10 years and been in construction since 1987, most of my work is custom trim,mantels and cabinets. my father bought a 8 1/4" makita saw in 1986 and i still use it today with a rousseau table,, i cant tell you how many LF has gone through that saw..well i thought it might be time for a new one , a bigger one . so i went with the makita 10" because of the deep 3 9/16" cut and the good luck a had with the last saw (as far as wear and tear, any makita table saw is useless to me with out the Roussseau table)in the past years.I also like the crank to lower and raise the blade,after years of hand turning the blade up and down this was really nice,,well when i got the saw i first took note to all the plastic parts that use to be metal, all the important parts , the gears,the crank, the lock. ive used the saw for four jobs now and the hand lock has all ready snaped off.. its very upsetting to see good long lasting tools get cheaper and cheaper..ive beaten the heck out of the last makita i had for the last 16 years, ive had this new one for 4 weeks and its already broken,,i do not recomend this saw to anyone that has to rely on it every day for work, it will not last..spend the money and buy a Dewalt... ... Read more

Features

• 1/2" metal ratcheting chuck with carbide jaws helps to prevent bits from slipping
• DEWALT built high torque motor delivers 450 in-lbs of maximum torque
• One-year warranty through the Dewalt factory or an authorized service center
• XRP™ extended run-time batteries provide long run-time & battery life
• Patented 3-speed transmission features a max 3rd speed at 1,800 rpm

Features

• Five year limited warranty on machines, parts and accessories
• 3HP single phase motor
• 3-knife cutterhead, serrated infeed roller, polyurethane outfeed roller
• Anti-kickback fingers, cast iron table with adjustable bed rollers
• Knife setting gage, dust chute and deluxe stand

Reviews (2)

Great Machine
After using a portable planer for about 8 years, I decided to invest a bigger machine. This planer is identical to the DC-380 exept for a different paint job. And it is heavy!I am one of the lucky ones to have a hoist to help unload it. If you don't, have 2 or 3 helpers to unload and set it up. It took me almost two days to get it up and running. I first determined that it was too low for me, so I solved that problem by putting large wooden blocks between the bottom of the stand and the moble base. By the way, that moble base is an absolute must if you plan to move it at all. Then I discovered that the cord was too short, so I put a longer cord on with a twist lock plug. Most of my machines have twist lock plugs,anyway. When it is assembled you must be sure the infeed, cutter, and outfeed rollers are adjusted properly. There is a gage block that you must make, and the manual shows you how. The dust chute has an outlet of 5", so a trip to the local hardware store to get a 5" to 4" reducer and some duct tape, because is was not a good fit. It is essential to hook it up to a dust collecter, or you will be hip deep in chips very fast. After all was said and done, I am pleased with its peformance. The serrated infeed roller keeps the wood moving through at a steady pace, and it has two speeds, but I stick with the slow speed to get the best finish. The roller extensions eliminate snipe, once they are adjusted. If you get rough cut lumber, this is a worthwhile investment.

Good planer, trouble with dust collection.
I purchased this planer 6 weeks ago. The "dust hood" that is sold by Toolcrib for this turned out to be ( not mentioned in the catalog) to be 5". I have tried working with both Toolcrib and Delta to find a way to connect this to my 4" dust collector but, after receiving 2 more dust hoods and 2 adapters that were purported to work, I still do not have a solution. I've not had a chance to plane much wood on it yet, but it looks well made (although in China). Anyone that has found a solution let me know. ... Read more

Features

• Titanium handles for lightweight and maximum strength
• All-locking blades for high-pressure reliability
• Sheepsfoot Blade with Cutting Hook for more efficient serrated cutting
• Premium belt sheath included for belt-side portability
• 154 CM premium stainless steel Clip-Point Knife

Amazon.com Review

Who wants to install 400 feet of crown molding? We'd be thefirst to volunteer, as long as we get to use this finish nailer.Weighing fewer than 4 pounds, it's light, ergonomically pleasant, andhas a great line of sight. We really like the depth adjustment on thismodel, an easy-as-pie five-position vertical slide right next to thetrigger. Nails load in a second, and you have the nice option of lockand load, or load and lock--something we think every nailer shouldoffer. Jams clear in no time without tools, another feature that showsoff DeWalt's attention to detail. The pad is high quality and didn'tmar anything we tried it on. Speaking of trying on, we looked great inthe cool, mirrored safety glasses included in the kit, and we're sureyou will, too. --Kris Jensen-Van Heste ... Read more

Features

• Swept back contact trip with low-profile no-mar pad
• Lightweight magnesium frame, weighs only 3.85 pounds
• Five position vertical slide for indexed depth setting
• Dual load magazine can be used either as "load and lock" or "lock and load"
• Tool-free jam clearing and 360-degree exhaust

Reviews (13)

DeWALT really hit the nail on the head with this one!!
I own both this gun and DeWALT's 18 ga. nailer. I have owned and used this gun for 2 years and have nothing but praise. It's funny, Home Depot used to carry these but gave up because so many people refused to change from other brands. Too bad for them!!! This gun is light but strong. A previous review had indicated that nails are difficult to find. What? This gun accepts all 15 gauge finish nails. Believe me I have used them all. I have run countless nails through this gun and have never had any issues with it.

Some features that I like:

1.The magazine is very easy to load.

2. Indexed depth setting is easy to use and requires no tools.

3. I can adjust the exhaust airflow to any direction. This is nice so it doesn't blow a piece of sawdust into my eyes.

4. If you jam a nail you can open up the firing head without the use of tools to free the squished nail.

I have used this gun on 6 inch crown molding, baseboard, installing doors and cabinetry. I have no complaints. I have no suggestions to make it better. It's perfect as far as I am concerned.

Plain tired of driving nails?
DeWalt hit the nail on the head (no pun intended) with this great nail gun. Works flawlessly, feels great, well balanced and looks good. This one wins hands down over the rest of the players. Enough said!

Best Gun I've Owned
I have been a General Contractor, Trim Carpenter & Cabinet Builder throughout my 16 years in the industry and have used a lot of different nail guns. Out of all of the 15ga nailers I've owned (senco, bostich, porter), this is truly the best of the best. Just the feel of the gun is very impressive to say the least, whatever the weight. This nailer is VERY easy to use, even at 120 psi the depth stop does it's job, more than I can say for my porter, which I GAVE away after using this for a while. I've been through about 6 boxes(18000) of Senco nails and yet to have a double-tap with the bump-action trigger and it hasn't jammed even once, not quite the record with the senco or bostich. This gun sinks the nail-heads consistently and has NO kick when driving through knots. And the fact that the no-mar foot doesn't leave it's "initials" in Redwood was outstanding! I would recommend this DeWalt 15ga Nail Gun to anyone who has the need or desire for one.

Great gun
I use my dewalt finish nailer every day, it performs great. No jams, no double taps, it's light weight and easy to use. I used to use a Senco. Never again.

Great Tool, hard to find nails though.
Very nice tool, light, doesn't Clog, and stick like some of my others nailing tools, I do have a hard time finding the nails at a Fail price. ... Read more

Features

• Weighs 6.4 pounds total; 2-year manufacturer warranty
• Powerful 18-volt rechargeable battery delivers more power and longer run-time
• Extended 22-inch blade provides a smooth and level cut
• 50-minute run-time trims up to 1200 square feet per charge
• Low vibration, dual-action blades improve comfort and reduce fatigue

Reviews (3)

Great Trimmer
When I purchased this, I was concerned that being battery operated it would be underpowered. That's not the case at all, it has plenty of power. The battery charge lasts longer than I do, too.

A real pleasure to get away from the cord. The vibration is much less than any other trimmer I've tried.

No More Cut Cords!
I agree with what was said in the earlier review. My own comparison is with the 10 year old B&D 22" electric that it replaced. I was impressed in that it gives up nothing in terms of power. I used it today for the first time on my 150' of hedges and lots of other bushes, especially hugh forsythias. It did all the trimming with no sign at all of battery fatigue. It's much smoother in operation than the old one. There are two things I didn't like about it. The forward handle is made so that it's only comfortable to hold at the top and not at the sides as in the old models. Also, as was said, there's not a lock-on switch. You have to hold the switch on. They did that, no doubt, for safety reasons, but that's probably where the fatigue enters. Many folks will rig up a clip to achieve the same thing.

Good trimmer
Black and Decker has a few cordless hedge trimmers so I was a bit confused which to try. This was their latest model and boasted a 40 minute run time so I decided to go for it.
The product worked great. I charged the battery the full 6 hours required when you first get it. What's nice about it is after the initial charge the full charge time is 3-6 hours, but the unit can left charging indefinitely without damaging the unit.
The unit performed admirably. It cut beautifully and the charge lasted the 40 minutes. The Hedge Hog breezed thru my bushes with ease. If I have two criticisms, they are 1) you have to keep your hand squeezed on the handle while using it - not a big deal cuz your hand is there anyway, and 2) (and more importantly) the unit isn't light. After about fifteen minutes or so, my arms got a bit fatiuged.
Still, the criticisms are minor, and I'd highly recommend this unit to anyone who doesn't want to deal with the gas or electric powered models. ... Read more

Amazon.com Review

If you've always wanted to own Powermatic's model 66 table saw, but you've held off because of the space it demands, then take a close look at Powermatic's Special Edition 66, built with the home workshop in mind. This is a piece of shop equipment that makes a toolhound's heart beat faster. The eye-catching high-grade cast-iron top is machine-polished to a mirror finish. The saw's table--impressively thick and durable--has both a cast-iron wing extension and a laminated extension (total surface: 28 by 53-3/4 inches). With one of the heaviest cast-iron trunnions on any 10-inch saw on the market, the model 66 virtually snuffs out vibration. The double drive-belt system--hooked up to the burly 3-horsepower motor--delivers pretty astonishing power. A C-flange mount takes the weight of the motor, so the blade cranks up or down easily without the extra weight. The saw's hand wheels are also made of cast iron and have excellent clearance.

The heart of any table saw, arguably, is the fence--and Powermatic's Special Edition 66 sports the award-winning Accu-Fence, a system that uses only two moving parts to create easy-gliding, precision, no-budge fence action. The left-tilting blade tilts away from the fence, which helps prevent kickback and binding of the stock, making for smoother cuts. The two-sided blade guards work independently of each other, so the blade is always covered. The guards also swing totally out of the way to make blade changes easy. Behind the blade, there are antikickback pawls for added safety. The saw's base has a clean-out door, allowing you easy access to the saw body and making cleanup a snap--no reaching around the saw components or having to remove the motor cover. You'll also receive a load of extras, including a dado insert, a motor cover, and an extension table and legs. Admittedly, this isn't a cheap saw; without a doubt, however, it is an excellent one that would make a great addition to any shop. As with almost everything, you get what you pay for--in the case of Powermatic's Special Edition 66, you get a fantastic piece of equipment your friends will envy. --Jon Groebner ... Read more

Features

• Built-in dust collection and convenient cabinet access for fast clean up
• Powermatic quality with a smaller footprint
• Heavy single piece cast-iron trunion for minimal vibration
• Laminated extension table
• Accu-Fence and rail system

Reviews (18)

Worth every penny - and then some!
This is one awesome table saw! I used to have a Grizzly contractor saw that drove me nuts - the fence and blade required constant re-adjustment. I've had my PM 66 for 3 years, and have cut thousands of board feet of lumber - haven't even re-adjusted the fence once! Dead-on accurate everytime.

Recommendations: - Get the 52" table extension. I dropped a Rout-R-Lift router base into the extension table to save space in my shop, and LOVE the ability to use the PM 66 fence for dadoes and rabbets on plywood projects (bookcases, TV stands, etc).

- Get the HTC mobile base. Easy to move the saw, and locks in solid. With the weight of the PM 66, this provides a completely stabile, yet mobile, cabinet saw.

- Wire the motor for 220V. Runs whisper quiet. Also, if you get the HTC mobile base, spend a few extra $$ and get a long, heavy-gauge electrical cord that you wire into the motor. I can move my saw anywhere in my shop, plug it into the 220V receptacle, and never worry about tripping over the cord.

- Don't think twice about the cost, if you are a professional or serious hobbyist. Fit and finish are superb. Dead-on accurate. Rock solid. Own one, and you'll understand.

Impressive little tool
Took delivery on the tool several weeks back, and in spite of the impressive crating of the tool, the unit arrived damaged (broken switch/starter assembly) and the separately boxed extension table was mushroomed at one corner.

After two weeks of having to harrass various customer service groups to get the parts through the order process and actually on a vehicle heading to my part of the country, the parts arrived. Total setup time was about 4 hours' worth of work, and about two weeks total duration.

Installing the extension table is a breeze, and most mating parts lined up perfectly (I did have to grind two of the table top attachment point slots wider as getting the top dead parallel with the blade was not doable with the factory borings.)

The tool itself is well crafted to say the least. The unit is absolutely massive, and vibration is all but eliminated. I was able to stand a penny on end on the table, start the motor and turn off the motor, and the coin did not quiver once. The cast iron top is polished to a mirror finish and as far as my testing indicates, is dead flat. The fence operates very smoothly and locks into position prefectly parallel with the blade (once initially aligned.)

Note that the extension table shipping with the saw as I write this is not the green color pictured, but rather is a black laminate over particle board. Also, to potential buyers, make sure you inspect the bottom of the beefy miter gauge to make sure it is burr-free (I had a couple of small ones I ground down after a few minor scratches in the top.)

Having never used this model before yet having heard it regarded as the 'gold standard', my high expectations of power and accuracy were met. Wish I had purchased this years ago.

The best I have ever used.
The Powermatic 66 (3hp) has been in my shop since 1984. It has ripped, crosscut, mitered, dadoed, molded, mortise-tenoned, styled-railed, worked wide materials and very small items all to perfection. In my book, this is with out a doubt the saw of choice! It has never failed to respond to a request that I have made of my Mr. 66.

The saw is equipped with a Beismeyer fence, as I tell my freinds, if you want to remove 128th of an inch of material bring it to Mr. 66, set it and cut it. The tables show the quality story, smooth and polished.

As you can see, I respect this tools because of the capacity and performance it produces. Mr. 66 is truily a joy to work with. It runs several hours a day which causes, because of the hard we work, to go through the edge of quality blades about every two weeks, then off to the sharpening shop. Buy it, use it and enjoy it, as I have. Charles D. Wallin

Total Woodworking Pleasure
Once you get past the several hours needed for set-up and the difficulty getting into your shop you will NOT be disappointed. This tool is AWESOME! Even a novice woodworker can get straight, true and accurate cuts with very little effort and experience. The cuts rarely need additional finishing. There is no vibration, hesitation or error with this machine. I wish I had bought one long ago.

Built Like a Tank
I bought my Powermatic 66 last year after deciding to upgrade the 1 1/2 hp Unisaw I had been using for years. I was sure I wanted a new 3hp Unisaw until I saw it and a Model 66 side by side at a woodworking show in Virginia. There really is no comparison...the 66 is heads and tails above the Unisaw in fit, finish, smoothness of elevation and tilt, and overall mass.

Another factor in deciding to go with the Powermatic was my previous history in dealing with Delta service. You feel like you won the lottery when you actually get someone to answer the phone!

I've equipped my 66 with an Excaliber overarm blade guard, a Biesmeier splitter and a Forrest 10 X 40 Woodworker II blade. If there's a better rig for sawing wood, I sure as heck don't know what it is! ... Read more

Features

• 1/2" ratcheting chuck with carbide jaws prevents bits from slipping
• Superior ergonomics provides optimal balance, comfort, and control
• DeWalt built high torque motor provides 500 in./lbs. of maximum torque
• Exclusive 3-speed transmission features a maximum 3rd speed at 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills faster holes in masonry applications

Features

• One year warranty/30 day performance certification
• Aggressive sanding action with a swirl-free finish
• Pad control feature to prevent pad spin-up
• Variable speed can be set between 5,000 and 12,000 orbits per minute
• 100% ball-bearing construction

Amazon.com Review

While there are a number of rotary tools on the market made by a host of different manufacturers, the Dremel Moto Tool is the one they all strive to copy. Dremel's MultiPro variable-speed model is great for a huge range of projects, from home improvement tasks to hobbies and crafting. It has a continuously adjustable speed range from 5,000 to 35,000 rpm, which allows the user to effectively work with materials as soft as balsa wood and as hard as ceramics. The flexible shaft that comes with this model is great for working in tight spots many rotary tools can't touch. The kit also comes with an assortment of accessories and a handy carrying case. Others may copy it, but Dremel has been making rotary tools so long they've come close to perfecting the idea. --Brian Trinen ... Read more

Features

• Variable speed, from 5,000 to 35,000 rpm
• Quick-change collet
• Flexible shaft attachment, 77 bits, and two clamps
• 5-year warranty

Reviews (16)

My Flexible friend !
Before I bought the corded Dremel Multi I used to use hand tools. The results were good but took time to produce. I then saw an advert on the television for the Dremel. I then went to a tool shop to see it and it's rivals. The only other competitor was the Black and Decker corded Wizard. The wizard lost out to the Dremel due to it's narrower range of operating speeds and it's greater size. The Dremel also had a far greater range of accessories to supplement it's use.

>I really appreciate the way that the Dremel can do what it does so quickly so well. It can carve letters, polish to a very high standard and grind metal as well as the capability to engrave metals as well. The fact that it does not take up a lot of room, especially when you consider the wide range of capabilities it has.

>To turn the Dremel on you slide the switch to one of the numbers on the scale, the further along you go the faster the shaft rotates. You set the speed according to the one recommended in the instruction manual which has pictures to guide you as well. You then apply the tool to the surface you are working on and gently do the polishing etc., but not too hard as it can damage the tool.

>I had my Dremel fitted with a optional chuck which makes bit changes faster and more convenient than the standard collet bits. You just loosen the chuck, put a bit in, re-tighten the chuck and select the right speed and you are ready to go. It also has a decent grip for easy and comfortable holding. It is quite simply a joy to use for craft. Special shafts can be fitted to the end as well, so there is little that has been missed out.

> The flexible shaft lets me work in places where the tool can't be inserted especially some places in my jeep! It's also easier to hold the flexible shaft when working on small workpieces like fishing lures etc.

The Speed is the Key
This is a fantastic tool for a home owner or craft enthusiast. The range of small tasks that you can achieve with the Multipro is unbelievable and easy, even for an untrained person.

This kit includes a flexi-shaft, which helps you get into corners by extending the accessory bit using a long flexible shaft. You can buy the shaft separately if you already own the tool, but it's cheaper to get it with the kit if you're buying for the first time. The carrying case is attractive, and fits everything with room to spare.

Some of the things you can do with your Dremel tool include drilling holes to hang pictures, putting lot numbers on your house, engraving your initials on items you don't want stolen, sharpening scissors and lawn mower blades, cleaning jewellery or golf clubs, giving sticking doors and windows a quick repair, cleaning silverware or brass or even mag rims, installing your car stereo and adding auto accessories to dress your car, trimming nails that are sticking up, regrooving damaged screw heads, sanding in hard to reach places, and so on.

It is however a small tool, so you shouldn't expect it to sand a dining table like a belt sander, or cut out a large wood pattern like a scroll saw.

You need a tiny spanner to change accessories, but it's included in the kit, along with different mandrels to hold the bits securely. There is a wide range of accessories available for even more tasks, and a great additional purchase is the tile cutting attachment, which allows you to do bathroom tile repairs with a lot less mess and guess work.

The secret to the Dremel is the speed, with a range of varying speeds up to 35,000 rpm, which you control yourself. The instruction booklet is very detailed, and gives you lots of tips. Dremel also has an amazing website, with step by step how-to guides.

Every home should have a Dremel Multipro

Works well for some things, doesn't do everything they say
My wife bought one of these for me as a gift. I had mentioned a couple of times it might be nice to have one... I don't know what came over me. The tool works great for details and doesn't work for much else. I have used it for a number of projects where I needed to file or grind something small... screws in a part that were 1/64th of an inch too long kind of thing. It works great for that, I don't have to apply much preassure to the item being ground. I tried using it to polish a pot (it's in the list of projects to do with your dremel) ahhhh... don't bother, threw polish compound everywhere because of the speed of the tool. Works far faster with a rag by hand. Or better yet... a big buffing wheel on a bench grinder. Works well for engraving too. Haven't tried it for much else. I think my wife will end up using it more for crafts than I will for the kind of stuff I do.

A must have tool
I disagree with the negative reviews. A dremel is not a benchgrinter or an orbital polisher, etc, etc. It IS 3 pounds of power concentrated into a 2 oz bucket. If you use it for what it's meant for, it's great. In the fashion of any MultiTool, like a leatherman, it has multiple funtions in ONE tool. While a dedicated tool might do a better job in certain circumstances, it can only perform ONE funtion.

This ol' Dremel done cut me a lot of stuff
This ol' Dremel is a mighty clever tool. I used it out in the woodshed to whittle me a slingshot out of a big ol' branch from a tree. Its also good to keep Pappy away when he sneaks up on me back in that ol' woodshed. Pappy sure do love his moonshine, and it makes him a bit frisky, I reckon.

Once I done shot me a possum back behind Ol' Man Stapleton's barn and that ol' Dremel came in mighty handy, let me tell ya. I got Ol' Mr. Possum's fur coat off of him lickety split. That sharp ol' Dremel took the head and legs off as fine as ya please. Threw Mr. Possum in the pot, me an' the kinfolk had some mighty fine vittles that night, let me tell ya.

This Dremel is also mighty useful for some doctorin' at home. Mama's prone to corns n' bunions, and we ain't have no money for the doctor. So I whipped out that ol' Dremel lickety-split and cut them bunions right off of Momma's foot! You shoulda heard her holla! But them nasty ol' bunions never came back, see Momma?

Only thing I don't like about this ol' Dremel is it sounds kinda like a pig squealin'. I reckon I don't mind, cause then people don't never know if I'm out back whittlin', or havin' me some fun with some lost campers or other city slickers! Yeee Haw! ... Read more

Amazon.com Review

Well-executed design combined with solid, reliable performance make this Bosch belt sander a tool with noticeable performance advantages. The Bosch features a magnesium-and-plastic housing that's lightweight yet durable. The tool is nicely balanced, comfortable, and easy to operate--important features in a tool that's often used for long periods of time for removing large amounts of stock. The Bosch comes with a cast-aluminum platen--so there's none of the warping that affects stamped-steel platens--and it sands perfectly flat right out of the box. Like many of the sanders in this class, the motor on the 1274 is aligned with the belt edge to allow flush sanding into corners. The tool's only drawback is that visibility is limited when sanding into tight corners, but that's a small minus when weighed against all the pluses. The belt-changing system works well--we didn't suffer any spring pinches--and the tracking adjustment tracks the new belt quickly and keeps it in place. There's a variable-speed dial built right into the trigger switch, which makes adjusting the belt speed fast and convenient. Wood magazine tested 10 3-by-21-inch sanders and liked the 1274DVS best. We agree that it's a great tool. --Mark McDonald ... Read more

Features

• Compact in-line design - For better balance
• 6.6 Amps, 550-1,100 SFPM power - For professional applications
• Variable speed - For fine finishing of fast stock removal
• Graphite platen pad - For cool running and uniform sanding
• Removable front handle - For close work

Reviews (22)

Just a little off the top
I'll be honest, this is my first belt sander, but I love it. I took the recommendation of some of the other reviewers, and I couldn't agree more. The sander is easy to use out of the box, and is a smooth-running, well-designed tool. The variable speed switch is very nice, and adds considerably to the user's control. I haven't yet done any heavy duty sanding, but for finish work the dust collection seems to work well. Five stars for Bosch on this one.

Solid Inline Belt Sander
I owned a small inline belt sander and found the shape gave me the opportunity to use the machine in many more ways, especially on its side sanding the edges of large pieces of solid wood. When I had to replace the small sander, I knew I wanted a larger version, and the Bosch fit the bill. Amazon sold it at a lower price than I could find locally, and then there was the tax I saved and free delivery!

A week later it was on the door step and it came out of the box and went right to work on some local hardwoods. There is lots of power to turn the 3 inch belt. While I have checked the belt for running off ceter- it almost never runs off. And the graphite patten is flat and stays cool. It has only a few hours on it but I am very happy with it. I have not used the fence, but I will, and I wish I had ordered the clamps to tie it down to a table upside down.

The only problem I have with the sander is the dust control. I have been using the dust bag and it is small, and dust puffs out of a small indentation near the dust nipple when lifting off or moving down on the wood. I have not tried to trouble-check the problem.

A happy Bosch customer and a happy Ammazon.com customer.

Awesome!! Nothings Better
This is an extremely well-designed and well-built sander. No complaints here only praise, praise, praise!

Thank you Bosch--you sure make my life a lot better!!

Effective machine
Works on the deck great with 36 Grit paper. However, the dustless feature seems to have been ommitted in the one I received. Borrowed a Porter Cable with a more effective collection system and in retrospect thought the more expensive Bosch would have been a better investment. Otherwise easy machine, good value.

Maybe I got a lemon?
I have recently purchased numerous Bosch tools from Amazon/Tool Crib and I have been a life-long Bosch fan. However, I have to say that this is the very first time I have been let down by one of their products. I guess I just got a rare "lemon".
Immediately on using it, I had problems with the "Lock-On Button". Either it would not keep the machine running, or when it did engage I could then not stop it! It works sporadically, but usually not until I have tried to disengage or engage it several times. Then, after just 15 minutes use sanding some deck timbers, a loud clatter developed. Sounds like a bearing problem? This did not seem to unduly affect performance, and since I purchased the unit for this specific job, I carried on for a while. Then, the rear belt wheel started to slip or disengage, like a slipping clutch. The work I was doing was not unduly difficult and for a period of time, the work was going like a dream, much as I am used to with Bosch tools.
So finally, I just gave up-extremely disappointed that I could not finish the job at hand.
I have returned it and I will get the 1276DVS instead. ... Read more

Features

• Includes tripod, rod, and case
• Self-leveling horizontal rotary laser
• 3/32" accuracy @ 100'
• 1000-foot range
• LD-100N detector

Amazon.com Product Description

Protect your hearing and listen to music at the same time. Whether you are at the job site, in the workshop, or mowing the lawn, you may be putting your hearing at risk, or at the very least putting up with irritating noise. Regular earplugs are uncomfortable and prevent you from listening to music while you work. WorkTunes' hearing protectors offer a high level of hearing defense as well as let you replace the irritating noise with your favorite AM or FM radio station. And while many stereo headsets have volume levels that can damage hearing, this set has a maximum volume level of 85 decibels, lower than the threshold of danger. ... Read more

Features

• Protective sound limiter
• AM/FM stereo
• 22dB earmuff
• Lightweight
• Comfortable

Reviews (31)

Money Well Spent
I love my Worktunes hearing protectors! I use mine while woodworking and commercial mowing. If a radio station is static-filled I would rather listen to a loud motor. My headphones have delivered high quality sound for both music and talk stations. The hours fly by when I have them on. I highly recommend them.

Great product, but not perfect
I originally became interested in these ear muffs for my wood shop after seeing nearly every landscaper in the world wearing them. Pros - Excellent noise protection, good sound, very comfortable, easy to use, great battery life, good construction. Cons - No markings on radio dial, reception could be a tad bit better.

As for the cons, the lack of markings actually isn't that big of a deal after a few minutes of use. You simply start at one end of the dial and finding your favorite stations becomes easy. I quickly developed a feel for how far to turn the dial to my favorite AM or FM stations. Another reviewer mentioned that these muffs don't receive FM stereo. They certainly do, but only if the station is strong enough and tuned in.

My other ear protection setup is a Sangean AM/FM/TV/Weather pocket radio or a scanner, and a $... set of professional grade David Clark earmuffs with speakers. Keeping in mind that this is about a $... setup, I still prefer the DC muffs for race tracks. However, the cord can get in the way while working in the shop or in the yard, and the radio needs to go somewhere. The Peltor does an excellent job, considering it's 1/3 of the price. As for blocking external noise, the Peltor muffs are as good as the David Clark units.

Overall this unit is comfortable enough for all-day use, I now wear them while mowing and snowblowing, as well as in the shop. I am happy enough with mine that I bought a pair for my father-in law. Over the six months I've had mine, they've been dropped, wet, frozen and heated, and they have held up well. We use non-radio equipped Peltor muffs where I work, they have proven to be very durable over the years.

great tunes
I purchased a set of worktunes while my wife thought I was crazy. But after using them one time she has now decided we need another set for her. Only complaint it is tuning dial very touchy. The earmuffs work very good for hearing protection.

Peltor Work Tunes 22 (not 09545)
I just recieved my PELTOR WORK TUNES 22 (not the 90545 model). The two models most likely have the same inside components. I selected the Tunes 22 because they are a little more compact. I do residential mowing with a 52" SCAG and these radio headphones work great. I was VERY skepticle before the purchase. After mowing, weed wacking and using a back-pack blower for several hours, I totally recommend this brand to anyone considering these. Fathers Day is right around the corner...A MUST for anyone who needs ear protection and enjoys music while you work!

These are just great
If you are looking to protect your hearing, theses are for you.
I could hear people talking but could not hear the tractor. I tend to play my music loud but these would prevent that. The volume is fine for my needs. Sometime I cut my lawn for 3 to 4 hours( 2 acres) and I use to be tired when I was done. I found out it was the noise that was making me tired. All I can say is buy them NOW!!!! ... Read more

Features

• High performance drilling speed
• 18-volt 3.5Ah Ni-MH battery for high speed drilling
• High torque drilling capability
• Lightweight ergonomic design

Reviews (1)

the seceret weapon
As a union journey man plumber I am always looking for the best product to increase my productivity. THis is the best Drill I have ever owned. Lightweight, Long Lasting and the Quality of being manufactured in Japan, not China like alot of its competitors. The battery technology and warranty are what really sold me. Having batteries go bad from overcharging or heat, the SoCal summers, is a big problem down here. THey have a warranty on the batteries for like 2000 charges. That is like 3 years, incredible. Also a problem is theft of tools and with the Panasonic I am the only person on the job with the tools so there is no confusion or misplacing of my tools. The only drawback is that Panasonic doesnt offer a full line of battery compatible cordless saws and lights yet. AS for this deal specifically where else can you get a top of the line Drill with 50$ in rebates. I paid the same for an 18v what most are paying for a 14.4v and mine is full of high technology. I completely reccomend this drill the the serious professional. ... Read more

Amazon.com Review

If only we'd had one of these when we built those doll cradles--and sanded all the little curves and crannies by hand! This beauty takes all the work out of jobs like that. No burn marks--ever--because of the oscillating action. Sure, you can chuck a little drum sander into your drill press, but you'll have to deal with that annoying gap between the drum and the table. This sander eliminates that. The large cast-iron table measures 18 inches in diameter and sits atop a 1/4-horsepower single-phase motor. A built-in dust collection fan draws down dust and chips through the table insert and into the dust-collection bag. There's room on board to store all the included accessory sanding drums and sleeves. It's light--just 45 pounds--and can be used as a portable sander or mounted to a stand or workbench through predrilled holes in the base. In addition to the standard 3/4-inch sanding drum and sleeve, the kit includes 1-, 1-1/2-, 2-, and 3-inch rubber spindles, drum plates, abrasive sleeves, and table inserts. --Kris Jensen-Van Heste ... Read more

Features

• 2-year limited warranty on machines, parts, and accessories
• Oscillating action prevents burning of workpiece
• Heavy-duty motor assembly for quiet, smooth operation
• Large cast iron table provides stability and support for the workpiece
• Built in dust collection fan and collection bag for a cleaner work environment

Reviews (5)

3 stars
This Delta Sander is very quiet and smooth and the workmanship appears to be good. The table top is flat.

On the negative side, the dust collection is poor. The power is adequate for a home shop.

Not quite the Boss
I have two neg. comments on this peice of equitment. The only place I can find the 3" sleves is at Sears. And the Dust collecting bag leaves a lot to be desired.

Small furniture builder
the delta sa350k Shopmaster boss spindle sander works fine. However; I suggest every buyer read the well defined directions. the guide post was off center. when centering adjust screws so the yoke will slide freely. <<<<<>>>> otherwise a very nice tool.

Quiet, smooth, and powerful.
I looked at this machine for a long time before I bought it. I thought that the motor might be too small and that the unit might be under-powered. When I finally purchased one I was pleasantly surprised. The machine is very quiet and operates incredibly smoothly. There is no hint of vibration and even with a 3 inch spindle and moderate to high sanding pressure, the motor did not show any evidence of stalling. If you have a home of small shop and want a great little oscillating sander, this is the one for you.

Very good spindle sander.
The Delta spindle sander I received had some minor problems. The unit was noisy. Under the 2 year warranty I could have taken it to a service location, but that would have meant a delay. Instead I made the adjustment noted in the directions. This adjustment is supposed to be made after many hours of use. Anyway, it did solve the noise problem.

One of the steel arms (called a link) that raises and lowers the motor assembly was bent. I removed it and straightened it out. It appeared this was a factory defect since it did not happen during shipping. The unit was made in Taiwan. Quality control is poor at the assembly plant I guess. This is the main reason for 4 stars and not 5.

The operation of the sander is very good. There is minimum vibration and noise during use. The dust bag included does a good job collecting most of the dust. It is easy to control the wood on the nice flat machined table.

Make sure you get the free spindle set that is being included. It has an assortment of spindles that are needed. The one included is the narrow spindle and limits the abilities of this sander.

Despite the minor problems that may have been unique to this one sander, I have to recommend it. It performs above average. And the price is right. ... Read more

Features

• Cup holder and mulch kit included
• 22HP Briggs and Stratton V-Twin engine
• Foot-pedal autodrive with reverse transmission
• 46-inch triple blade deck
• Ammeter included

Amazon.com

Power, power and more power! The 18-volt 1/2-inch hammer drill/driver's high-torque motor churns out an impressive 500 inch-pounds of torque—imagine the jobs it could tackle. We were surprised by how good it feels in hand, thanks, we think, to its neatly balanced design that places the handle toward the center of the tool. A nice touch is the ratcheting chuck with carbide jaws for a superb hold on your bit. And the all-metal, three-speed transmission is so innovative that DeWalt patented it. All we know is that this is one powerhouse of a hammer drill/driver, no matter what mode it's in. The DC385 recip saw's keyless blade clamp wins points in our book for fast blade changes. And talk about fast—with its one-inch stroke length, it runs at 2,900 strokes per minute. Like the drill, it's well balanced and feels good in hand. It's compact, lightweight and offers great cutline visibility through the pivoting shoe's open top. Plus, we like that the blade will reverse for flush and plunge cutting. The circular saw slices into 2x4s like butter, and you can always see your cut because the blade's on the left. Bevel cuts are no sweat; the saw's easy to adjust and the scale's clear. Finally, the flashlight's neck is super flexible, shedding light in just about any direction for up to three hours. This is a great collection of tools, essential for the contractor and perfect for the skilled do-it-yourselfer.--Kris Jensen-Van Heste ... Read more

Features

• DC385 with keyless blade clamp for quick blade changes
• DW919 flexible floodlight for hands-free use
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque
• Exclusive 3 - speed all metal transmission
• DC390 cuts 2X4's at 45 degrees in a single pass