Features

• 7.5 amp, 10,000 rpm
• Factory reconditioned to perform like new!
• Metal gear housing for increased durability
• Convenient paddle switch with lock on button for easier gripping
• 3 position removable side handle for greater comfort and control

Features

• 7/8" SDS rotary hammer with electro-pneumatic hammer mechanism for fast penetration and low vibration
• flexible floodlight for hands-free use
• One-year warranty through the Dewalt factory or an authorized service center
• 1/2" hammerdrill/drill/driver with 450 in - lbs of maximum torque and exclusive 3 - speed all metal transmission
• The reciprocating saw with keyless blade clamp allows quick blade change without touching blade or reciprocating shaft

Features

• 360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy
• Factory reconditioned to perform like new!
• 6.7 Amp motor provides high performance and overload protection
• Dual mode: hammerdrill/drill for wood, steel or masonry applications
• 3.85 lbs. - lightweight design for extended use and less user fatigue

Features

• 360-degree side handle, rear side handle mount reduces the amount of bending over required by user in down drilling applications
• Factory reconditioned to perform like new!
• Dual housing construction with rubber mounts reduces vibration
• Multiple seals prevent dust from entering tool for extended hammer mechanism life
• Efficient cooling system protects tool in tough applications

Features

• 360-degree side handle, rear side handle mount reduces the amount of bending over required by user in down drilling applications
• Factory reconditioned to perform like new!
• Electronics provide speed/impact control
• Maintains specific drilling speed under load
• Red/green LED lights indicate when service on hammer is necessary

Features

• 360-degree side handle, rear side handle mount reduces the amount of bending over required by user in down drilling applications
• Factory reconditioned to perform like new!
• Electronics provide speed/impact control
• Maintains specific drilling speed under load
• Red/green LED lights indicate when service on hammer is necessary

Features

• Adjustable, tool-free steel motor cam lock
• Factory reconditioned to perform like new!
• 1-3/4 HP (max. motor HP), for smooth routing in toughest hardwoods
• Micro-fine depth adjustment ring in 1/64" increments
• Quick release motor latches

Features

• One tool knife change system allows the user to easily seat new knives
• Factory reconditioned to perform like new!
• Three knife cutter-head for superior surface finish
• 96 cuts per inch for a smooth finish
• Extra-large folding tables and a four column carriage lock minimize the movement that causes snipe

Features

• Used as a 7 or 9-inch polisher depending on the accessories used, tool weight 7.8 lbs
• Factory reconditioned to perform like new!
• Heat-treated, precision-cut gears for smooth operation
• External brush caps for easy servicing
• 7 Amp, AC/DC motor operates the tool at 2,300 rpm, 5/8" - 11 Spindle thread

Features

• Pivoting fence for angle cuts
• Factory reconditioned to perform like new!
• Quick locking vise for fast clamping
• D-handle for user comfort
• Steel base for increased durability

Features

• Spindle thread is 3/8-inch-by-24, tool weight: 6.8 lbs
• Factory reconditioned to perform like new!
• 120-Volt AC/DC capacity works off welding machines and generators for increased productivity and versatility
• Rotating Adjustable guard for greater flexibility and visibility
• External brush caps for easy servicing

Features

• Multi-Coated SIGHT-LINE™ Window for maximum abrasion resistance
• Stainless-steel shoe stays rust free while minimizing chip build-up which prevents marring of the cutting surface
• One-year warranty through the Dewalt factory or an authorized service center
• 6-3/4" 40-tooth carbide tipped blade cuts up to 2" conduit and pipe in one pass
• All Metal Upper and Lower Guards for maximum durability

Features

• 625 in-lbs. of maximum torque for a wide range of fasteners
• Variable speed and reversing; 0-2,000 rpm for fast and efficient fastening
• One-year warranty through the Dewalt factory or an authorized service center
• Powered by the DEWALT 9.6V "system" of battery packs
• Electronic torque adjustment for consistent torque in varying applications

Features

• 1/2" ratcheting chuck lock with carbide jaws prevents bits from slipping
• DEWALT Built Series 4000 high torque motor provides 450 in-lbs of maximum torque
• One-year warranty through the Dewalt factory or an authorized service center
• Exclusive 3-speed all metal transmission features a MAX 3rd speed at 0-2,000 rpm which is 38% faster than high speed
• Hammerdrill Mode: 34,000 bpm in MAX 3rd Speed drills faster holes in masonry

Features

• Electric brake
• Factory reconditioned to perform like new! Limit 1 per order.
• Long-lasting NiMH batteries
• High-performance motor
• Two speeds, reversible clutch

Reviews (14)

Factory-Reconditioned Makita R6233DWBLE 14.4-Volt
Although I have only been using this drill for a couple of weeks, I highly recommend it. My previous drill was a Bosch 9.6v which I used for about nine years and really liked for the most part.

Although reconditioned, the Makita 6233 took a hard examination to tell that it had been used at all. One battery had a few light scratches on the btottom, but otherwise it all looked new. With an as-new warranty, it doesn't matter anyway.

The Makita is far more powerful, feels better in my hand, and has lots of features that make it a joy to use. The trigger is easily accessed as is the reversing switch which also has an intermediate position which locks the trigger. I particularly like the electronic brake which stops the drill almost instantly. This works by feeding a bit of "reversed power" to the motor when the trigger is released. This will wear the brushes a bit faster, but Makita has designed the brushes to be easily removed from the drill for examination and replacement.

After years of dealing with chuck keys on all my drills, the keyless chuck is a joy. Counter-rotate the rings on the chuck by hand and it tenaciously locks onto the bit. I drilled some 3/8" holes throuhg 2x4s and the bit never slipped.

It is really nice to get away from the Nicad batteries. NiMH cells generally aren't damaged by sitting in a discharged state like nicads, so they should last longer.

The flashlight is no toy, supplying a bright light that can make working a lot easier. It stands up on its own and the pivoting head makes it eeasy to aim. It even comes with a shoulder strap, and we have been taking it on night hikes.

Unless you are a demanding professional who needs the most power available from the 18 and 24 volt drills out there, this drill should meet all your needs. At this price (for the reconditioned model) nothing comes close.

Factory-Reconditioned Makita R6233DWBLE 14.4-Volt 3/8" Drive
The condition of the drill, batteries, charger, and flashlight are like new. There is only a small "R" (about 1/8" high) etched into the side of the drill that distinguishes it from new. This drill has a solid feel and excellent design. For example, the drill body is angled relative to the base - this moves the center of gravity to the back over the battery, which makes the drill rest more steadily and feel more balanced. Another reviewer mentioned the slow speed as being too slow. I think the slow speed works well, actually the same spec as the Dewalt slow speed - ideal for driving screws. The charger has four different LED indications for charging. The only criticism I have is that the drill is a little heavy for general household use. However, it is a 14.4 and for that category, it is comparable with competitors. If you need the power and the weight is not a big issue, this drill is a great choice.

good drill bad light
I bought this from Amazon.com in Dec. 2001 as my old Dewalt gave up the ghost after only three years. It never felt strong enough from the beginning, so I went with the Makita 14.4. Again, with Makita, what a difference. Mine was a new drill with an "R", probably returned for no reason. After a battery charge I Ran 3" deck screws in 30-#1 CCA 2x6x20 decking. After a year and 3 months It will still countersink, or snap the heads of 3 1/2" screws without pre-drilling. Plenty of torqueI haven't used the light till about 3 months ago, and the switch doesn't work. I don't care I did not buy it for the light. I figure it was a promotional thing. There is no comparison to nicad batteries. This is a serious tool. I have not been dissapointed in anything Makita has made in the last 7 yrs.

Piece of Junk!!
I could not believe the condition of the drill when I finally recieved it after several delays. It looked like it was dragged to my house by the delivery truck. My old drill was in better condition. After 3 uses the variable torque on my "recondition to like new drill" let go...I can't even drive a sheetrock screw into a 2 x 4. This is my second 14.4 makita drill and my last. I will never buy another makita or buy a tool online again. I've learned my lesson, it's worth the few dollars more to buy locally and know I'm getting what I want. At least I'll be able to use the batteries in my old drill. I should have bought a DEWALT or PORTER CABLE!!

Factory-Reconditioned Makita
I was dissappointed that the keyless chuck was in very poor condition. Although the drill works flawlessly, it looked as though the chuck had been friction burned - quite ugly looking. I figure I got what I paid for - great light and drill but kinda wished I'd paid the extra bucs for a pristine new drill. The flashlight and batteries appeared new. ... Read more

Features

• Electric brake for quick stops
• Cuts all types of metals such as uni-strut, galvanized pipe and metal studs
• 3,200 RPM and 2-1/8 in. maximum depth of cut
• Clear guard provides an excellent line of sight for cutting

Features

• Orbital cutting action
• 6 position pivoting handle
• Compact and only 6.7 lbs.
• Quik-Lok™ blade clamp
• 0-3,000 strokes per minute, 3/4 in. stroke length

Features

• Base has adjustable positive stops at 45 degrees and 90 degrees
• One year warranty/30 Day performance certification
• rugged, two-speed gearbox
• 360 inch/pounds of torque in the lock-up position with 20 clutch positions
• Saw has 6-inch blade is able to cut 45-degree angles in all "two by" framing lumber

Features

• Router: 23,000 rpm, 1/4 inch self releasing collet, interchangeable with all Porter-Cable router bases
• 1 year parts and labor warranty
• Complete kit, includes 1/2 inch drill, router and jig saw
• Drill/Driver: two speeds, 390 in/lbs of torque, 20 position clutch
• Jig Saw: 1" stroke, 0-2,200 strokes per inch, variable orbit, keyless blade clamp

Features

• 5 position belt hook
• External Brushes
• 1,415 inch pounds torque
• 1/2" Square Drive
• Electronic Feedback