Features

• Rafter hook and measuring rule on the magazine
• Powerful
• Lightweight and well balanced
• Low recoil
• All-weather use

Reviews (18)

Framing Contractor - Grand Rapids Michigan
...It seems that all the experienced framers in the area prefer the Hitachi nailer. I disagree. I prefer the Paslode. The balance, and weight make a big difference to me. I also prefer the nails. You do not have to concern yourself with the plastic flying into your face. Some will say the Hitachi is a faster gun, however I am unable to find anybody who is able to run either gun to its full potential. The only reason I gave it a four star is because of the clipped head nails. If I can find a round head nail that will work with this gun, it would become a 5 star review for sure...

I've always liked Paslode air tools
When I started framing we had an older silver looking Paslode gun that felt like it weighed a ton (chuckle), and a brand new one that felt like you were using a finish nailer (it was light in comparison). Both guns shot nails extremely well. In fact, they were more dependable than the other brands that were available on the jobsite (Hitachi & Senco).

Since somebody decided to liberate me from my Porter-Cable FC-350, I decided to go back to my beginnings and purchased this Paslode gun. I do not feel that my choice was flawed at all.

You've got to make sure that your pressure and the depth adjustment are in tandem or you will have overdrives or stand-offs. This is the case with any nail gun though.

I'd always recommend Paslode guns to anyone who would ask. Besides, I'd rather use paper collated nails too.

Paslode F350S
As the owner of a professional custom wood crating shop, we fire 1000's of nail monthly. This is by far the worst product we have ever used. It came miss firing and not firing from day one. Our supplier thought we were crazy, but upon checking w/ the factory it was discovered to have a Paslode known problem. (The old nieve corporate mentality - getting the customers $$ and worry about it later)It was updated and repaired several times, but continues to not fire and blow air either from the head or trigger (apparently from poor fitting internals). We can not deal with this piece of junk. It's headed to the dump.....

Good Nailer
This was my first framing nailer, and I lucked out with a good one. It can get right between studs on a 16" OC. I have never had a problem with it. The gun is powerful -no problems sinking nails. - Comfortable and well balanced. It is a little loud and has some recoil, although not as much as my full-head nailor. No jams so far. The light weight won't wear you out either. I don't think you can go wrong with this gun.

No plastic collation spit out at you, or to clean up!
Yes you can get round drive heads, which is more appealing to the eye.
Yes you have to pull the wrench out to change the depth, however I do not have to do that too often, it is not a bother to me.

I have the Impulse Framer (The new orange one not the old black one) as well, I much prefer the pneumatic.

Why have a cordless chop saw right next to your plug in table saw? Cords and hoses are a part of the jobsight.
Impulse' days are coming, but not for anytime soon. ... Read more

Amazon.com Review

With 225 mph of maximum force, the Toro Ultra Blower is a three-in-one machine--blower, vacuum, and leaf shredder--that's ready to rip through leaf-covered lawns with the power of a small hurricane. Better yet, you'll likely find it to be not only one of the most powerful lawn tools in your garage, but one of the most versatile as well. To facilitate the different uses, the blower comes with a quick-release latch for easy conversion as well as infinitely variable air control. In addition, the metal impeller mulches leaves with fearsome efficiency, reducing 16 bags of leaves down to a single bag. For those looking for a blower that'll make quick work of acres of matted-down leaves, Toro's Ultra Blower is up to the task. --Rivers Janssen ... Read more

Features

• Variable air control
• 225-miles-per-hour maximum air force will clear just about any lawn
• Metal impeller for efficient mulching
• Reduces 16 bags of leaves to 1
• Converts from blower to vacuum mode with no tools necessary

Reviews (22)

Good, but they skimped on the details.
I've used this for 6 months now. My primary interest was for its mulching of leaves, so I can compost them. I've run out of space in my woods, and throwing them away seems like a waste. I've used the blower too.

It works great sucking up leaves. The pieces are generally chipped to perhaps half to 1 fingernail in size. As to how much it reduces the volume, I took a mostly dry slightly overfull wheelbarrow full of leaves - and it was reduced to a little less than half-full after running it thru the machine. So that's roughly a 2:1 reduction, not 16:1, as Toro advertises. It's good enough for my needs, in terms of composting. (Mulching the leaves adds an extra 40 degrees of heat to the composting process, in a compost tumbler, 160 vs. 120 degrees.)

The blower works well too. The variable speed makes it easier to control where leaves go. I gathered leaves from one tree into a pile in 5 minutes, and vacuumed them up in another 10 minutes, filling (stuffing) one 39 gallon 'lawn & leaf bag' (so 2 bags worth, unshredded). I've also blown dirt, weeds, rocks, gravel and other crud off my driveway (2500 sq. feet) in a matter of ~10 minutes, which would take perhaps an hour to sweep by hand.

And I suspect, and was told in correspondence with a well-known Consumer's magazine, that the magnesium impeller should last a lot longer than other models, which are typically made of plastic. That was my primary reason for buying it. We'll see on that score. So far, its holding up.

Where Toro missed:
it doesn't do well with leaves that have virtually any amount of moisture to them IF they've decayed (meaning last year's). They jam up the outlet passage within 1-3 minutes (going in to the bag), as well as the crevice area around the impeller. You have to unplug it, undo the bag attachment, and access the impeller region, and fish around with your finger, digging out all the wet gunk which has been chopped in a very fine mess. Freshly fallen leaves which are wet don't cause this problem. Skimp # 1: Toro didn't bother to include some plastic gadget for digging out the stuff, so you scrape your knuckles quite a bit (I'm afraid of using a screwdriver and ruining the impeller).

Skimp # 2: the bag, the cord, and the handles seem backward to me. But then, I'm left handed, and most of the world seems backward to me. The vac is still quite useable, backward though it is, but Toro seems to have chosen to ignore 10% of the population that is left handed, which doesn't impress me.

Skimp #3: in that it's electric, you're chained to a cord. The owner's manual says not to go over 150' in length, and to use 14 gauge for that distance. I happen to like 12 gauge cord for long distances, and that's what I own - and the 'cord lock' (a piece of plastic on the handle) is not big enough to handle 12 gauge cord. C'mon Toro! What's it cost to make it a smidgeon bigger to handle a larger size extension cord??

Skimp #4: in converting from blower to vac or the other way around, you have to omit certain pieces of equipment from the machine, both large and small. There's no place to store them, on the machine. So, I suspect they'll be either easy to lose or misplace. Or a pain to keep track of. It would be far nicer if the small pieces were storable, and Toro had figured out a way to make the large pieces in such a way so that they could be left on the machine at all times (e.g. the blower has a bottom cover that has to be removed so the vac has access to the impeller. Why not have a sliding door for that cover piece?)

Skimp #5: the bag is tiny. It fills up in ~3 minutes, and that is 1/3 of a lawn and leaf bag. And your property involves how many lawn and leaf bags for you? i.e. A lot of stopping and emptying. One company's product, as I recall, has a set up where the vac empties in to a garbage can directly.

Overall, it does what I want and need, and I'm happy. But it's not without its faults, and I expected better from a company of Toro's reputation.

Toro 51598 Ultra Blower
I purchased this itme last year and have been very happy with it. Its so easy to use and it is very powerful. I don't even have to have the power on all the way and it gets the job done. I love that adjustable power knob. And it is true what the description says about it reducing 16 bags of leaves to 1. It has a stainless steel mulching blade. The only bad thing i have to say about it is that there is no different shaped attachments for different jobs. Other than that i recommend this blower to everyone, it is the best! It will also work with 200 feet worth of cord. I bought 2 100 feet cords, and the blower works fine.

Died in less than a year
I purchased this blower last summer. I did not use it very much and now it has burned out. I am trying to get the warranty honored by Toro's service centers. I will see if they will honor the two year warranty, but I would not buy this blower again. Less than a year of service and it burns out, that is lousy workmanship.

Ultra Blower Rocks It!
I can't get over how hard the Toro blows. I live in a forested villa where I often get mounds of leaves falling into my drive-way. It used to be a big problem, but with my Toro, those leaves practically jump off my driveway, screaming in terror. Also works well against my ex-wife when she asks for the child support. Ha ha! I would recommend this for anyone who hates leaves as much as I do. And no one hates leaves as much as I do. Especially in fall.

good blower
If you don't need a gas blower this does the job very well. I use it mostly for cleaning off the driveway and patio. It can of course work the leaves too. You'll be pleased. ... Read more

Features

• No more cutting 1/16-inch oversize to allow for resurfacing
• 10-inch by 40-tooth, 1/8-inch kerf
• One blade does rip, combo, and crosscut
• No more scratchy saw cuts
• No more second-step finishing

Reviews (63)

Smoothest Cutting Blade I've Ever Used!
I use this in my 5hp Jet Table Saw and it is absolutely super! I do have the Forrest 5" dampener that I use with it which limits the depth of cut to 2 1/2". Without the damper, it will cut almost 3" in my saw. The cuts are so clean that you can literally go to the 220 grit sandpaper as the first grade! I figure I'll save the difference in cost on sandpaper alone (maybe)!

Forrest offers resharpening service for these blades that restores them to factory specs. They do require a special grind that most "locals" can't do. Buy this blade and you won't be sorry - buy once, cut twice as long!

The blade resurfaces so precisely, I sold my jointer
I bought my first Woodworker II at the AWFS show in 2001, and was so impressed with the quality of the cut that I snatched another up on eBay soon thereafter.

Before I bought a Forrest blade, I'd have to have to plane, joint, and then finish cut on my table saw to get precise 90 degree corners, and even then, the edges of my stock I couldn't use for a glue-joint.

Then I found the thin kerf Woodworker II. Wow, I've saved considerable time and sold my Delta jointer as a result of this sawblade. Even with over 1500 lineal feet of stock previously cut on the blade, I've been able to joint an edge straight from the tablesaw to the clamping rack. Impressive!

Make sure that you buy the Forrest blade stabilizer, and a zero clearance insert for your tablesaw, in order to get the most finished cuts. It'll reduce the depth of cut by about 1.5 inches, but you'll still be able to cut 8/4 stock with no problem.

Sharpening will [cost you]..., but you'll get a lot of use from it before you have to do that.

And, now I'm in the hunt for the Forrest 8 inch dado.

p.s. You can probably find it cheaper than here on Amazon[.com], look at eBay and at Forrest's website

Expensive But Worth It!
I have found that you generally get what you pay for when it comes to power tools, drill bits and saw blades. The Forrest WW II is no exception. I have one mounted in my 10" 3HP Jet cabinet saw and couldn't be more pleased with its performance. Like the other reviews, it cuts extremely smooth in both the rip and cross cut directions, saving un-necessary blade changes for each operation. I couldn't believe how smooth this blade cuts and is also a quiet blade. I also ordered the Forrest stablizer, but have not used it- I don't think you need it. I have used the blade for several months now and have cut 8/4 red and white oak, hard maple, and ash. The blade cuts so smooth that there is no visable kerf marks in the wood resulting in an edge that looks like it came off of a jointer! Forrest also offers a quality sharpening service which is highly recommended when you need it. I have friends that have been cutting with this model blade for over a year now and it still cuts like new. I know it seems expensive, but when you consider how much two high quality (one rip & one cross cut) blades would cost, plus the time to change blades, then it is really more economical in the long run. I have really been very pleased with its performance. Hope this helps you in your decision making. Happy Sawdustmaking!!

What's the big friggin' deal???
I was looking for a new saw blade because my Freud was good, but not as good as I thought it should be. I read everywhere that Forrest blades were the best around. After reading this for months, I decided I'll try one and I don't see the big deal I will return it.

Well, first I unwrapped the box and held the blade in my hand and could tell this is one well built blade. It is sturdy and heavy, very solid. Second, I mounted it on my tablesaw and mounted my zero clearance insert. I noticed immediately how well balanced the blade is because the blade did not chatter against the zero clearance plate like my Freud blade did. Third, I cut a piece of oak plywood and was amazed how the blade cut through it like a hot knife through butter. Fourth, there was not one splinter hanging from the plywood, whereas my Freud blade would cause a splintery mess. I would not hesitate to buy this blade again.

Well worth the money in my opinion!!!!
I had recently bought a Jet 3hp table saw and also bought the WWII blade...I was so impressed with the quality of the cut that I went out and bought the 12" Chopmaster and the 8" dado....I recommend their blades to anyone that I've encountered...I only use these blades for the better grades of wood...for cutting up 2X I'll use some Freud blades which do fine for that purpose but don't even come close to the Forrest Blades...

For those of you that have burning problems...you must not have your table saw set up right...cause I cannot see how you could be burning your wood on cuts when I don't experience this nor do a whole bunch of other people...

Get the Forrest Blades you won't regret it... ... Read more

Amazon.com Review

The Lawn-Boy 10686 eases everyone’s least favorite weekend task in a number of ways. No more yanking on a stubborn cord--an easy electric starter means the powerful Tecumseh LV 195 engine thrums to life with the turn of a key. A Sens-a-Speed self-propel system guides the mower without depending on the sweat of your brow, and even adjusts automatically to match the operator’s natural walking speed (up to four miles an hour). Finally, a three-in-one system lets you choose between rear-bagging grass clippings, discharging them through a side chute, or mulching, to give your lawn a shot of 100% natural fertilizer. Switching from one function to another is quick, easy, and involves no tools whatsoever.

The 10686 also comes loaded with thoughtful comfort features like easy-adjusting handle height, soft ergonomic grips, and a one-handed, easy-lift bag. Step once on the quick-stow lever to have the handle fold at a ninety-degree angle; step twice for flat, 180-degree storage, allowing even the bag to stow away neatly. The 21-inch steel cutting deck is durable, lightweight, and simple to maneuver. Combined with the unit’s easy-turn wheels, it means the 110686 is exceptionally uncomplicated for even smaller persons to handle in turns and tight corners. This mower is covered by a full two-year warranty. --Mary Park ... Read more

Features

• Full 2-year warranty
• Gas-powered, self-propelled mower; effortless electric starter
• 3-in-1 system collects clippings, discharges through a side chute, or turns into mulch
• Powerful Tecumseh LV 195 engine with 6.5 horsepower; Sens-a-Speed drive system adjusts to match your natural walking speed
• Quick-stow lever; easy-adjusting handle height; 1-handed easy-lift bag

Features

• 11.0 amp motor, 18" cutting swath
• Single lever height adjustment form 1"-to-3-1/2"
• Lifetime deck warranty
• Mulch, side-discharge or optional side bag (BA-075)
• Adjustable push-handles

Reviews (14)

Does a Great Job!
This mower cuts and mulches my lawn very well. It is very light and very easy to maneuver. Not having to buy gas and oil make up for having to perform the "cord dance."

Just about perfect for those with small yards
We live in a townhouse with a 1600 square foot lot, so we didn't need a self-propelled gas mower. A cheap gas push mower would have costed about half as much as this electric mower but the bother of gas, starting, etc - just not worth it. I just plug this mower in, pull a switch and go. I was really struck by now much less of a hassle an electric mower is the first time I used it.

I really like the single-lever height adjustment, and the 40-pound weight makes it easy to manuvre. There was some dancing with the cord, but not enough to be a bother. It is also a very quiet mower, which I am sure the neighbors appreciate.

It did bog down a bit when I went over some 8" tall thick grass, but other than that, this mower had plenty of power. So this is not the mower to use for big jobs on big yards. But for me, it's perfect.

Gas no more
This lawn mower cuts as good as my 6hp gas one did and a whole lot lighter. Need to watch where your cord is.

So easy, it feels like cheating.
I'm in my third summer of having a quarter-acre lawn of my own. The first year, I used a reel mower, the old-fashioned muscle-powered kind. I felt virtuous since I wasn't making any noise or air pollution, but it wasn't powerful enough to take down the thick crabgrass. I would need to follow up with an electric weed whacker to get the stubborn stuff. If I were to go out of town for a weekend, I'd regret it when returning, since the knee-high grass was nearly impossible to tackle with a reel mower.

Last summer, I inherited the old self-propelled gas mower I used as a teenager. No more worries about stubborn grass, now I had power-- or so I thought. It would pack all the clippings into a hopper which I could use for composting. Sadly, I only got one good cutting before the thing needed so much maintenance I could have bought 2 of these electric mowers. The pull cord starter was a pain, as was the noise and smell of a combustion engine. I also needed to store gasoline, which didn't thrill me since I don't have a garage or a shed. Bah.

This summer, I decided to do the sensible thing and look for a compromise solution. I had used electric mowers in the past, but they didn't have the sort of power that this one has. It's like a dream! Even knee-high grass disappears under its whirling blade. I haven't had to use the discharge function yet, since the mulcher is so effective. There's virtually no clippings left behind to rake and bag -- the only real evidence is the green hue of my mowing shoes. Sure, you need to manage a cord, but if you work your way out from the electrical outlet in parallel lines, you hardly notice except for when you "come about." It reminds me of sailing.

It's quiet, it's effective, it's easy, and it's clean. No fumes or stink on this hog. I wish I had bought one of these two years ago. I can store it indoors without a big mess. It starts instantly, every time. Very strongly recommended if you have a small lawn like mine.

Fantastic
I've had this mower for about 4 months now, and it's great. It does take a bit of getting used to with the cord. I find myself mowing like I vacuum: with the cord in one hand and the mower handle in the other. But the mower is so light, it's a breeze to operate with one hand. You may have to go over an area twice if your grass is really long and think, but it's definitely not a burden because of its weight. ... Read more

Amazon.com Review

Rid a room of excessive dust, pet dander, and pollen for enhanced respiration without resorting to chemical cleaners with the innovative Ionic Pro ionic air purifier. The electrical air purifier operates at 120v AC and 60Hz to quietly circulate and clean indoor air. The purifier air filters air in to collect debris and allergens before releasing clean air back into the room.

The ionic air purifier works by emitting a positive charge into a room. Particles in the air likewise become positively charged. As air travels through the air purifier, allergens naturally gravitate and cling to the negatively-charged metal collection plates in the appliance. The air purifier features a grounded plug for use in grounded-style outlets. Energy efficient, the purifier allows users to choose between low, medium, and high power levels to best address a room’s size and allergen content without wasting energy. The air purifier works best in rooms up to 500 square feet in size. The purifier uses a LED display to indicate the selected power level. Another light indicates when the purifier requires cleaning. While many other air purifiers require the purchase of replacement filters, this model does not use filters. Users clean the purifier by wiping its collection plates clean with a rag according the cleaning directions outlined in the product manual. The purifier should be cleaned every four to five days. For user safety, the purifier should be turned off and then unplugged prior to cleaning. This item is intended for indoor use only and should be situated approximately 12 inches from the outlet. Do not use the purifier in bathrooms, near fireplaces, or in spaces with frequent exposure to flammable vapors. Ionic Pro offers a one-year warranty for this item. The air purifier measures 29 by 10-1/2 by 9 inches and weighs 10 pounds upon shipping. --Jessica Reuling ... Read more

Features

• Electrical ionic air purifier for reducing allergens and dust in indoor environments
• Purifier quietly positively charges particles in the air before attracting them with negatively-charged collection plates
• Operates at 120v AC and 60Hz; grounded-style plug requires use with grounded-style outlet
• Low, medium, and high power levels available; covers rooms up to 500 square feet
• Air purifier measures 29 by 10-1/2 by 9 inches; weighs 10 pounds; limited warranty available

Reviews (26)

Works, but ...
I bought two of these. I live near a heavy traffic street, and it gets filled with black particles every three of four days, and I believe my allergies and my son's are getting better.

The problems:

1. The power light is so bright that you do not need a night lamp to read.
2. Good thing is that the power light stopped working after two days, I had to put some black tape on the other unit to have a dark room for sleeping.
3. One of the two units I bought makes and extremely loud noise. I tried to change the blades from the other, but the problem seems to be in the unit and not the blades. Being outside the U.S., bad luck for me.

DON'T WASTE YOUR MONEY!!
I fail to understand ANY of the positive reviews of this item since it so obviously doesn't work. I've been running it now for several months in a very dusty house (with 3 dogs, no less) and it hasn't removed enough dust to bother with-certainly no where near what the manufacture claims. And given the cost of the unit, hardly justifiable.
It's just another attempt of corporate America (or maybe China,I don't know) inventing any gimmick to relieve consumers of their hard-earned cash.
You're far better off buying one of the $20 fan-driven units that have been around for years. In spite of the drawbacks to these units, they do work.
If you're in the market for a tall, black, ugly, object that takes up space in your living room, by all means buy this!
So one more time: IT DOESN'T WORK! IT'S A PIECE-OF-CRAP! DON'T WASTE YOUR MONEY!

Similar to Ionic Breeze, but not quite "silent" (as claimed)
I got this because it was about $50 cheaper than a refurb ionic breeze.It seemed to do something - there was some crud collected on the blades - but I didn't notice any difference in the smell of the room really.Worse is that it has a very faint buzzing sound even when the blades are completely clean.It said that it is supposed to be completely silent on the box.

I returned it for this reason and just received a refurb ionic breeze from Sharper Image today.Hopefully it will work better and will be silent (my friend has one and claims you can't hear a thing even if you put your ear on it, so hopefully that's true).

If the manufacturer reads these reviews: please fix the buzzing and you'll have a decent product.

Great Product
I just cleaned off the blades in my ionic pro that i bought a couple of weeks ago and they where completly caked and covered with dust.I have noticed a huge difference since I bought this product my allergies have been reduced considerably and their is no more dust or other allergins floating around the room.I have also recieved comments about how the air in my room seems fresher.This is a great product and for the price it can't be beat.If you suffer from allergies like I do you really can't put a price on any kind of relief.

Works pretty well
I clean the filter every six weeks or so.It's usually dirty, but not caked on filth or anything like that.I guess the dirt that IS on there would have been floating around in the room without this air purifier, so I have to give it props for that. ... Read more

Features

• DC385 has 1-inch strole and 2,900 spm
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque
• Exclusive 3 - speed all metal transmission
• DC385 with keyless blade clamp for quick blade changes

Amazon.com

All circular saws are not equal. This one would sit above the rest even if all that set it apart was its blade-change system. No more wrestling with wrenches—-say hello to Porter-Cable's Quik-Change keyless, tool-free blade change setup. It's ingenious in its ease and simplicity. But the good news doesn't stop there. It's aggressive and powerful, cutting cleanly through whatever you feed it. Some really nice features distinguish it, too, like the on-board cord clip that keeps the power cord clear of your cutting line. And the built-in dust port that rotates 205 degrees for efficient dust collection with a 1-inch outlet. Even the handle gets a nod from us, with its soft, comfortable grip. Miter capacity is a versatile 0-50 degrees, and of course, there's a super-accurate positive stop at 45 degrees. Whether you're a dedicated home do-it-yourselfer or a professional, you can't go wrong with this saw.--Kris Jensen-Van Heste ... Read more

Features

• Standard equipment: Saw, 18T carbide tipped Riptide blade #12800, case #907834, and operating manual
• Quik-Change keyless blade change offers tool-less blade changes in seconds
• Magnesium construction provides more durability and lighter weight at 9lbs
• Aggressive cuts with a 15 amp motor at 5,800 RPM
• 100% ball and needle bearing

Reviews (1)

Awesome Saw
Flawless. All the power you would ever want in a circ saw, with barely half the weight of a worm drive. The cast magnesium base is rock solid, glides easily, and adjusts like a dream. Adjustable dust chute, comfortable grips, solid trigger.

How much did this cost again? Can that really be the price?

This saw takes on all comers.

My shop is fast becoming the domain of Porter Cable, and it's because of tools like this. I have a vivid imagination, and I can't think of anything - anything at all - that could make this a better tool. Highly recommended! ... Read more

Amazon.com Review

For years, Milwaukee's Sawzalls have been valued for their outstanding ability to cut through almost any material: wood, nail-embedded wood, steel, cast iron, aluminum, brass, drywall, composition materials, hard rubber, cement, brick, plaster, and fiberglass. This 11 amp Super Sawzall has a standard blade stroke mode, plus an orbital stroke mode for more aggressive, faster cutting of thick wood. You can choose the level of orbital action, too, to fit the application--or you can switch it off for cutting in metal. Like almost all reciprocating saws, this Super Sawzall also has variable-speed control (with a speed control dial) for versatility, control, and increased efficiency over a wide range of applications. For those of you who've grown up with Sawzalls, you'll appreciate the addition of the handy Quik-Lok blade clamp, which lets you change blades quickly without having to use a hex wrench; this feature is especially convenient when you're cutting hard materials, such as steel, a situation in which blades break frequently. There's also a handy quick lever adjustment for the shoe.

We really like this tool's counterbalancing mechanism, which reduces some of the unavoidable vibration found in reciprocating saws. The difference you feel when operating this tool, compared to nonbalanced saws, is significant: the Super Sawzall is still extremely powerful, yet it has a smooth feel. As a result, of course, you can work longer with less fatigue than you can using other, unbalanced saws. Another significant feature is the clutch, which, by absorbing shock and impacts to the internal mechanics caused by sudden blade lockups (typically encountered during extreme use), minimizes time wasted tending to a damaged saw. Although this is a heavy tool, it does have an ergonomically designed rubber grip that provides a solid, comfortable hold. --Tim Block ... Read more

Features

• Linear counterbalance reduces vibration
• Powerful 11-amp motor; 3,200 spm
• 1-1/4-inch blade stroke
• Steel Quik-Lok blade clamp system
• Orbital-action blade stroke for faster cutting through wood

Reviews (39)

The Best Sawzall Ever Made!
I had a Makita for 13 years that wasn't too bad, but it finally died of bad bearings. The repair cost was within $10 of replacement so I started shopping.

I was going to get the 10 amp Super Sawzall, but after reading toolpig's review and considering the advantages of orbital action, I bought this one. It was only $5 more. I will never be sorry!

My first project was cutting up a bunch of rebar to use spiking railroad ties down. Over 100 cuts (with a Lenox blade) and I wasn't tired and neither was the saw. I slowed it down with the speed dial to keep from burning up my blade. I never realized how handy this one feature would be until I used it. You can get precicion control over top speed without having to finesse the trigger. Just set the max and pull it wide open - no more overspeed burns!

Next I was cutting railroad ties with a 12" Lenox blade. I started out in the straight cutting mode and it was slow after the first inch. I switched to orbital action and the blade just about fell through the wood! I was making straight cuts and miters on 8" x 10" ties with no problem. I had used a chian saw in the past, but railroad ties always have a "suprise rock" right in the path of your cut. The recip blades are basically disposable, so you can save the chainsaw for less risky duty.

This saw runs smooth and quiet, no user fatigue after hours of use. The adjustable shoe is real handy, another feature new to me after the Makita. If this tool lasts as well as it runs, you'll never need another recip saw. I don't see how they could come out with a better tool, unless it would run itself on voice command while you sat back and watched! Maybe next Millenium.

Best Sawzall I ever purchased
Everyone knows that sawzalls can cut through almost any material: wood, nail-embedded wood, plaster, metal, (steel, cast iron, aluminum, black pipe, conduit, etc.) drywall, plaster,... you get the idea. When I used this to cut through floorboards and 2x4's it was as smooth as a hot knife through butter. Unistrut and allthread were also no match for this machine. This 11 amp Super Sawzall has a standard blade stroke mode, plus an orbital stroke mode for a faster, more agressive cut through thicker wood. You can also adjust the amount of orbital action from none to full depending on the application. This sawzall also has the new Quik-Lok blade clamp with allows you to change blades in seconds rather than minutes. There's no more searching for a hex wrench to change blades here.

I've been using sawzall's for quite a while now and I have always admired Milwaukee Sawzalls for their dependability and durability. When I finally had to replace my old one and discovered that Milwaukee had introduced a new sawzall to their line, it was a simple choice for me. The added power and easy of use make this an idea choice if your building something new, tearing something down, or fabricating something for a job. I would highly recomend this product to anyone who wanted to purchase a sawzall.

Might as well buy the Milwaukee--It IS the Best!
There are a lot of reciprocating saws on the market today; unfortunately some masquerade as a 'Sawzall', but Milwaukee invented the genre decades ago and, quite frankly, nothing is even in the same league as a genuine 'Sawzall'. DeWalt, Makita, Ryobi, Hitachi, Porter Cable all make reciprocating saws; some are professional grade, some say they are and some are just consumer models. When you decide either through using lesser tools or simply want to own the very best, Milwaukee stands head and shoulders above the competition in the reciprocating saw market.

Consider some of the features found on this model Milwaukee:

11 amps of power and it feels like more. This is one big, robust saw, period.

Detachable cord. Only Milwaukee figured out the ways people use a reciprocating saw--constant, demanding ROUGH use. These saws are most typically used in demolition work. In this environment you run the saw relentlessly and go through some blades. When you want to change one, in a hurry, nothing on earth is handier than being able to simply unclick the power cord and do a blade change. Believe me, you wouldn't want to change a blade on this beast without it being unplugged.

Orbital action. When you're rough cutting lumber, nothing assists you like an orbital action. This allows the blade to more aggressively cut through the material with less binding and less discomfort to the operator.

Anti-vibration. I don't know the technical nuances of how Milwaukee cancels out the vibration, but this saw is the smoothest (from an operator's standpoint) saw I've ever used. Any recip saw can truly rattle your fillings when it binds, but fortunately this Milwaukee has anti-vibration and a clutch, that genuinely minimizes feedback to the operator.

Easy blade change chuck. This has got to be the simplest blade change known to man. Rotate the collet about 1/4 turn and you're in business. NOTHING could be easier.

Variable speed dial. What a nice touch! Instead of relying solely on trigger pressure for speed control, Milwaukee thoughtfully provides a speed dial. Set it to half and you can pull the trigger back all the way and run at half speed. Demo work doesn't usually involve feathering the trigger, so this is a godsend.

Typical Milwaukee construction. Want to find out how good Milwaukee's reputation is in the building trades? Go to a jobsite. ANY jobsite. Residential, commercial, plumbing, electrical, it doesn't matter. First, stop by and ask any professional what they think of Milwaukee. Second, look for the RED tools (Milwaukee's trademark). Every jobsite has Milwaukee. The pros respect them because they don't break.

I brought this tool home on a Sunday and had to cut up 15 pallets to downsize them for garbage disposal. If you've EVER had the fun task of cutting up pallets, you can appreciate that the wood is FULL of nails (everywhere) and it's genuinely very hard, dense wood. Has to be to support the loads that pallets carry. I chucked in a new Milwaukee blade and 30 minutes later there was over 10 pounds (yes I weighed it!!) of sawdust and a BUNCH of small boards left. Saying the Milwaukee cut the boards like a hot knife through butter, in my mind, does a disservice to the hot knife! I ran the saw until it became so hot I couldn't hold it anymore, which is being overly severe to any tool; I just wanted to see if Milwaukee's vaunted reputation was as deserved as people say. It is. The saw NEVER stopped running; I honestly believe I could have put on gloves and kept going, but did allow the saw to cool down and resumed cutting. If a nail was hit, it bucked a little and just went on through it. It's a beast, plain and simple.

It's a very specific product, but one with a ton of uses. If you've never used a recip saw before, I would caution you to always make sure your item being cut is safely secured; a recip saw of this size has enough strength to easily move anything that is loosely held. Always be sure of what's under or behind the blade; if it's a concrete driveway or asphalt, you can damage the tool, but REALLY damage the driveway! Wear boots and safety goggles, this thing takes NO prisoners. And for heaven's sake, if you're demo'ing a wall, make absolutely certain that there are no live electrical wires present.

This saw isn't for everyone; it's pricey for single, consumer use. But, if you want the very best made reciprocating saw made, look no further than the Milwaukee Super Sawzall. It's the class leader by a BIG margin.

The best reciprocating saw period.
My wife bought me one of these as a birthday present this year. Can you believe that? It doesn't get much better in my book. The thing works great! I've cut wood, angle iron, rebar, nail embeded wood, flashing nailed to wood and all of it was a breeze to cut through. About the only thing I haven't tried - concrete... I'll have to see if I can find the right blade!

In the past I've used Dewalt, Makita and PC reciprocating saws extensively and most others on the market and none of them have performed like this. I think the best part of this saw is the lack of vibration while cutting, it far outperfroms the others. That said, there are also easy blade changes (watch out they're hot if you've just been using them) the detachable cord (love those things, got a couple of other Milwaukee tools with that and it couldn't be better), adjustable shoe, orbital action, and speed control dial. I can't think of anything else they should put on the saw except for maybe someplace to rest a 12 ounce can of something cold. I recommend this without reservation over every other saw on the market today.

A hot knife through butter is SLOW!
WOW!

I have used other reciprocating saws in the past but none has impressed me as much as the Super Sawzall.

I first used it to demolish a kitchen that I am remodeling. Wood, nails, formica and drain pipes never slowed the blade on the this Sawzall. I used a metal cutting blade for the drain pipes but everything else was cut with the blade that was recommended for nail embedded wood. Since then I have used the Sawzall for several other small projects around the house and it has performed flawlessly.

I did purchase the Milwaukee 11-piece blade set but haven't opened it as the two included blades are still sharp and still effortlessly slice through everything that gets in front of them.

Maybe this saw was overkill for my small home improvement projects but the ease of cutting and lack of kickback and vibration are worth the extra money. ... Read more

Features

• One full year parts and labor warranty, 30 day risk free performance guarantee
• Environmentally friendly method of paint removal
• Reversible carbide blades
• Safety clutch
• Low vibration reduces fatigue

Reviews (9)

Paid for itself the first job
This paint remover does the job; takes the paint off down to the wood and it never gums up with paint. I used it to strip paint from a fifty year old house with many layers of paint. It took me 4 days to strip the whole house. I estimate it would have taken twice as long to scrape the house by hand, and I would not have done nearly as good a job. I dulled four of the carbide blades to strip the whole house. The tool is light enough to operate with one hand. However, there are some tricks to using this tool:

- You have to wear goggles, (not just safety glasses) earplugs, a dust mask, gloves, and I'd recommend coveralls. This tool throws a lot of dust and small chips. I did not use a vacuum because I felt the hose would slow me down too much, but a vacuum should make the job much cleaner.

- Watch out for nails. You have to set the nails before you strip the paint. Just give the nails a wack before stripping. If you do snag a nail, it will either shave off the top or rip it out of the board. It's something you don't want to do too often.

The tool is well made except for the little doors covering the rabbet blades; I busted one off the first day. It has a nice long and flexible cord. Pet peeve: the switch turns off too easily.

It's not perfect, it's just better than any other tool for stripping paint. And, it'll pay for itself on the first job.

Professional Painters Need This Tool
I just spent the last two days using this paint stripper and I gotta tell you this is an amazing tool. It will shave (no pun intended) hours off the time it takes to strip paint from a house. I was worried about the price, but it has paid for itself already. I am ripping paint off of cedar siding in 1/4 of the time it usually takes. The depth-of-cut adjustment lets me adapt to different paint millage, and it is really easy to use. If you have read other reviews, you will know that the little plastic doors that protect the 90, 180 and 270 degree cutters are really flimsy and WILL pop off, but it is still the best paint stripping tool I have come across. Make sure that you set any nail heads that may be in your way, because this machine will rip and warp any nail haead it comes in contact with. You will need ear protection, and the 3M full face mask is a must when working in warm climates. Try this tool. It will save you so much time and so much hassel. If you don't like it, send it back.

Fast is the right word
I bought this tool about a year ago, and has you've read in the other reviews it's all true. I took down some 6" redwood siding, 4" fir and pine boards to the bare wood in no time. A word of caution on softer woods wider than 3", take your time and get use to the machine. It will gouge on the edge at times, depending... how your reach is to the work. You either even it up with a pass from the oppisite side, sand with a 6" inch orbital down to finer grit, or patch and sand. I used it on latex paints so far and gumming was not a problem, plus good life from each edge of the cutting bits (4)... if you counter sink any nails. Attching my shopvac made less to clean up! Also rough grain wood texture will be smooth flat when done, you may do some light sand blasting to match the texture or stick with chem/citrus strippers. Goggles recomened.

Worth every penny
I bought this tool to take about 17 layers of paint off the cedar siding of my house. It works great! My choices were the Metabo, Porter Cable and The Paint Shaver (which was by far the most expensive). The Metabo was the only tool of the three not listed on eBay the day I purchased it.

This tool does a great job on siding and even facia and window casings. You need to be careful on softer wood like pine with this tool. It can easily take off the paint as well as a hefty slice of wood.

Be sure to purchase plenty of extra blades if you are taking off lots of old hardened paint. They will get dull, however you can turn the blades 180 degrees and use the other side before you have to replace them.

This tool is extremely loud. Be sure you have good ear protection. Also, it throws chips everywhere at high velocity. So good goggles and a dust mask or respirator will save you some agony.

Overall, for the money this is a great tool. I highly recommend it over manual scraping or liquid/paste strippers.

Savings outweigh expense
I purchased the Metabo paint reomover about 2 months ago. I used it to remove about 6 layers of paint from the fascia boards on my house. This tool works amazingly well and is very easy to use. When all of the paint was removed, i gave the fascia boards a quick once over with a random orbit sander. When finished, the fascia boards looked brand new. One coat of primer and two top coats of paint and presto, my home looks great. Doing a thorough job in the first place prevents you from having to return and "fix" it in a couple of years.
Initially I was very skeptical of how this tool would work as well as the seemingly steep cost. I wondered how a hand held power tool the size of an angle grinder could cost sooo much. In the end, I feel this tool easily saved me money because a paint contractor would probably charge me a small fortune to take all of my homes fascia boards down to bare wood before repainting.
My home was built after paint containing lead was banned so I opted not to use the dust collection built into this tool. One gripe is that I broke one of the small tabs on one of the plastic blade covers within 2-3 hours of use. The plastic covers should be made more durable considering the cost of this tool.
If you are removing paint on a significant amount of wood or on a home with very much wood siding, I would suggest you purchase the extra 10 piece blade set ).
Overall, I am very pleased with my purchase of this tool. The tool was delivered in about 4-5 working days (as stated). ... Read more

Amazon.com Review

Remember when you were a kid on Christmas morning, with a pile of new toys to play with--but no batteries? Well, Porter-Cable's not going to let that happen to you again. Here they've packaged their hard-working 18-gauge brad nailer with its power source--a 15 amp, 120-volt, 6-gallon compressor driven by a 2-horsepower oil-free motor. Fill up the nailer with standard 18-gauge brads from 3/4 inch to 2 inches long, hook up, and you're ready to install baseboards, chair rails, moldings, even make quick work of those wooden craft items like country shelves and vegetable bins. Here's a nice feature: the safety is located behind the driving guide, so you can work in tight spaces. The die-cast body weighs only 2-3/4 pounds, and a removable rubber nose won't leave a mark on your workpiece. There's a handy depth adjustment for setting the drive depth of the nail and a directional exhaust port. When the anodized magazine's visual reload indicator tells you you're empty, reach into the rugged carrying case, where there's room to store 5,000 brads. The kit comes with quick connects, 25 feet of 300 psi air hose and thread sealing tape. It's the perfect combination at a really good price. Kris Jensen-Van Heste ... Read more

Features

• 1 year limited warranty
• Professional nailer shoots 3/4" to 2" 18 gauge brad nails
• Nailer features cushion grip, depth of drive, quick-release nosepiece, and directional exhaust
• Oil-free compressor produces 3.7 scfm at 40 psi and 2.7 scfm at 90 psi
• Complete kit with quick-connects, 25' 300 psi air hose, thread sealing tape, nailer case, and wrenches

Reviews (4)

Great product delivers almost everything promised
This nailer kit is by far one of the greastest additions to my home workshop. The tool is flawless and the uses for readily available compressed air keep on coming. Ordering from Amazon was easy and the product arrived on time in excellent condition. One of the main reasons I purchased from Amazon was the $50 promotional certificate. DON'T EXPECT AMAZON TO HONOR THEIR OFFER. All you get is some gibberish about a technical error from Amit. Fat chance I will ever buy anything from Amazon.com again.

A happy owner!!
I bought this kit because I wanted a larger compressor than I had, one with a tank, and a brad gun. I came upon this and bought it. The gun is great and never jams and is easily adjustable. The compressor works flawlessly. My only complaint (be it a minor one for me) is that the thing sounds like a jackhammer. It is LOUD!!! I mostly use it in my garage so I ended up puting it in a shed outside and running a hose into the garage. Now I barely hear it. The 4 stars is only because of the noise level.

Good deal for the money
Positives: works very well, plenty of power to drive nails into hardwood, doesn't split the wood (even at the edge of a board), it's consistent in depth of drive, doesn't mar the surface, and the price is good.
Negatives: none other than the noise of the compressor, but hey it's a power tool what do you expect.
Summary: highly recommend!!!

Perfect for my needs.
I purchased this kit because I had a ton of baseboard molding to replace. This included everything I needed in one convenient package and is perfectly sized for my needs. I have used it for molding installation and have purchased two additional nailers to use with the compressor: a framing nailer and flooring stapler. The compressor will cycle more often because of its small capacity but that is not a problem as long as you are near an electrical source. This is the perfect size for the home improvement enthusiast. ... Read more

Features

• One-year warranty
• 3-1/4 horsepower, 15-amp Milwaukee motor
• 10-foot welded steel frame
• Zinc-plated 1-3/4-inch guide tubes
• Four Nylatron roller bearing systems

Amazon.com Review

A deceptively simple-looking tool, the BoWrench is a boon for both professional deck builders and do-it-yourselfers. The BoWench gives you a fast, one-person way to straighten decking boards. This is great, because decking material--whether redwood, cedar, or another, more exotic rot-resistant wood--is often warped, especially in 14- to 16-foot lengths. To operate the BoWrench, you simply fit the tool on a joist, swing the lever arm, and release. You can either push or pull boards into alignment, and when the handle is perpendicular, the tool locks in place, holding the board securely and leaving you free to drive nails or screws. The BoWrench is better than toenailing. Burying nails in the sides of decking to close gaps works, but it gives water more ways to enter the decking, which eventually leads to rot. With the BoWrench, you'll save time, create a longer-lasting surface, and maximize material. Using the special cam attachment (sold separately), the BoWrench replaces the clumsy beater block as the best way to close gaps in tongue-and-groove plywood and paneling. --Jon Groebner ... Read more

Features

• Heavy-gauge steel construction
• One-person operation
• Can push or pull
• 24-inch handle
• Closes 2-inch gaps

Reviews (16)

Awesome tool!
I am building a new home that has two large porches, two large decks and a small balcony. I decked the first porch with T&G Mahogany before I purchased this tool. What a pain! The boards required significant "tweaking" to get them to lay tight. I tried various methods of prying the boards tight with very unsatisfactory results. The best method required screwing a 2-by along the joists, using a piece of scrap T&G board and prying against it with a flat bar. Then the fun would begin; trying to hold the board tight with one hand and trying to get a screw driven into the deck board with the other.
The BoWrench simplifies everything! I started on the second porch after I bought this tool (I bought the T&G attachment as well). The wrench's "cam-action" not only pulls the deck boards tight, but it holds them there freeing up both hands. I am actually able to use some of the boards I culled from the first porch as being too warped; the BoWrench just pulls them into place. Also, by switching the pivots you can "push" a board instead of pulling it. This was very useful on the porch when I was close to the house. I can't wait to use it on the rest of the decks. I can't imagine not having one of these tools if I planned on building more than one deck in my lifetime. Definitely worth the money!

Lost without one!
The BoWrench is the best decking tool I have ever used because its easy to use, and it doesn't mar joists like other ones. As a contractor that builds a couple of decks a year, this has paid for its self many times over. You can achieve proper gap spacing with out digging through the lumber pile for straight boards(if they exist anymore!). I would highly recommend the BoWrench to any deck builder.

Works for me
All the ads for this product show it being used on 5/4" lumber. I didn't know how it would perform on 2x's, but with the poor quality of pressure treated lumber around here, I definitely needed some help. I'm glad I bought the BoWrench. I just finished a 12' x 24' deck using 2" x 6" lumber, and this tool muscled them into position with ease - just needed a 1/4" shim to compensate for the thickness.

Couldn't Live Without BoWrench
I'm an avid do-it-yourselfer and just added a 1,000 square foot deck addition onto our home. I purchased a Bowrench to straighten 5/4" deck boards and it is amazing! Just slip it on the joist and pull the handle - it straightens the board and leaves you with both hands free to fasten the board.

Since then I've used it for installing 1" x 6" pine T&G on our kitchen ceiling and for installing log siding on a small cabin we built. I have a shop full of tools and it's one of my favorites! (and this is the cheapest place I could find it at)

Must be better than the Stanley version
I just used my new bowrench and loved it. It is well made and works well. I was concerned that the Stanley tool might be of higher quality, but I'm not any more. Also, I could not get enough information on the Stanely tool to see if it would even work this well. Being able to lock tool into place is priceless... ... Read more

Features

• Low recoil
• Lightweight, weighs 4.7 pounds
• Angled magazine
• Adjustable depth of drive
• Requires no lubrication

Reviews (4)

Great Nail Gun!
No issues with mine, great handling, nails set perfect everytime, quieter than most, and oil-free! I have used different sized nails with no problem. Buy one it's great!

Sometimes doesn't shoot
I purchased this nailer from the BOB to install lots of 3/8" plywood sheets in the garage. A friend had lent me his Pasco framing nailer for the 2x4's. The Pasco works well, no misfires, no jams. The contractor must have it set in production mode because it was easy to shoot two nails in trigger pull.

The Senco was also a joy to use. No noticeable weight, well balanced, and considerably quieter than the Paslode (it is a smaller gun). Depth of nail was easily set and consistent.

I had three complaints with the Senco: 1) Air connector nipple was not included, necessitating another trip to the BOB. 2) Nails do not shoot consistently. I can fire 20 times, then 4 misfires. Usually when I'm in the most inconvenient place. It has something to do with the safety switch or nail guard not completely activating when the gun is set. I will contact Senco and/or BOB today. If they can advise a fix, the gun stays. If not, back it goes. Too bad.

Another great SENCO product.
This is a great nailer. It is both smaller and lighter than the SFN40 which is (was) the standard by which all other finish nailers are compared. One outstanding feature of this tool is that it is very quiet, while still able to drive and set 2.5" nails with ease. The depth adjustment and exhaust vent settings work just like other SENCO units, so no complaints there. You cannot go wrong with this unit.

Great for crown mouldings
I bought one of these guns recently as a replacement for another nailer. I put in thousands of feet of crown moulding every month and have yet to have any sort of misfire or double nailing. It also sets the head of the nail comfortably below the surface each and every time. ...Yet another great SENCO tool! ... Read more

Features

• Aggressive teeth design grips lumber for easy toe-nailing
• Rugged magnesium housing makes this tool lightweight and easy to handle
• Molded rubber comfort grip lasts the life of tool
• Drives 2- to 3-1/2-inch full round-headed nails with 1,000 inch/lbs driving power
• Exclusive push-button depth control for quick flush nailing adjustments

Reviews (10)

n88rh framing nailer
well thought out design with nice balance and a great depth of drive adjustment.plenty of power.to bad it jams so much using sheathing nails.I have owned the gun for over a year, sent it back to the manufacture because of jamming problems and they installed a new magazine. didn't help,recoil causes back nail strip to jam on front strip and won't let nails feed properly.some brands of nails work better than others, but still very frustrating.

Bostitch N88RH-1 Round Head Framing Nailer
This is the third framing nailer I have owned and the best. Its high power and light weight make it a pleasure to use. The push button depth control for setting nails is great and there are no tools or line pressure adjustments needed. It set the nails from flush to deeply buried - even in some very hard old pine I tested it on. Mine came with both the sequential trip and contact triggers. I like the sequential trip trigger as it allows for more accurate nail placement without the risk of double firing. Bostitch says it takes only 21 degree nails, however my local supplier only had 20 degree nails and they worked perfectly. I would highly recommend this nail gun.

EXCELLENT FRAMING TOOL
THIS IS AN EXCELLENT FRAMING TOOL I HAVE OWNED A FEW OTHERS AND THIS ONE OUT DRIVES,WEIGHS LESS, AND WAS COMPETITIVELY PRICED.
(ALTHOUGH I BOUT MINE FOR LESS THAN YOUR PRICE AT MY LOCAL LUMBER YARD} GO BOSTITCH!!!!!!!!!

Buy this one !!!!
I've been a pro for 25 years and have used many framing nailers and this is the best I have ever used/owned. Read the recent "Fine Home Builders (Taunten Press)" review on this gun, it hit the top of the list along with the Max.

Great Framing Gun!
Built half of my garage framing with this gun so far. Used nails available at Home Depot. 31/4"... No jams. The compressor was set for about 90 psi and had 75 feet of hose. No tools needed to use this gun, the depth setting is easily changed. When set for max. the nails went just below the surface; set for min. the head was about 1/2 inch above the surface, useful for temporary bracing etc.
Why would anyone want the palm nail thing? Might as well use a hammer. But with this gun you only need a hammer for pulling nails. I could not rate it less than 5 stars.
Also, read the reviews on the older models and you'll see they last a long time. ... Read more

Amazon.com Review

This professional-grade construction stapler is built to handle all but the toughest 16-gauge applications. The industry ranks this model's power-to-weight ratio as best in its class. We found it to be fast and powerful, capable of driving up to 16 1- to 2-inch staples a second. In fact, this model can handle eight different staple sizes. It has a top-loading, easy-release feed system with reload indicator, and jambs are easily cleared. Other worthwhile features include a mechanical countersink, narrow nose, and adjustable exhaust. Senco designed this stapler to be reliable, using 30% less parts than the competition. Among its many applications are sheathing, furniture frames, wood shingles, and decking. --Tom Kasperson ... Read more

Features

• For sheathing, subflooring, decking, fascia & soffit, lathing and more
• Versatile stapler has the best power-to-weight ratio in its class
• Designed with 30% fewer parts & 15% more power than the competition
• Drives 16 gauge staples 1 in. to 2 in.
• Adjustable depth-of-drive

Reviews (3)

SHOOTS LIKE AN UZI
I RECEINTLEY BOUGHT THIS GUN FOR NAILING OFF PLYWOOD. I COULDN`T BELIEVE THE SPEED IT WOULD SPIT OUT THE STAPLES; IT SOUNDED LIKE AN UZI. THIS IS MY FAVORITE AIRTOOL I HAVE BY FAR! I RECOMEND THIS GUN TO EVERY HOMEBUILDER!

Does it all
Just bought a Senco SNS65 to do the siding, sheathing, soffit, facia, etc. on the house I am remodeling. It works great, plenty of power for both 1" and 2" staples. I'm using 1" rough cut siding on the log house and it drives through and flush every time. I'm glad I bought it.

Top Of The Line
SENCO has been around a long time and it shows, it's a top of the line product. Well made, tough construction, lightweight, comfort plus, makes this product worth the money.It's depenability and craftmanship make the investment worthwhile. ... Read more

Amazon.com Review

Porter-Cable's 3-by-21-inch belt sander features an all-metal housingthat gives the tool a solid feel, makes it tough to damage, and lets you sandeffectively without having to press down. This sander also does a great job ofkeeping belts centered, a terrific bonus because there's nothing morefrustrating that having to constantly re-center a belt. According toPorter-Cable, the all-metal housing accounts for the centered placement of the belts.The sander remains rigid, even during heavy use, and the metal helps dissipateheat, keeping the belt relatively cool and in place.

This sander also has a variable-speed dial that lets you match the speed of thebelt with the application, so you can speed up for aggressive removal or dialdown for more precision. We really like the 360-degree adjustable top dustnozzle--a feature you won't find on many belt sanders--because it lets you pivotthe dust bag (or hose if you're hooked up to a dust vac), a huge conveniencewhen sanding in corners or along edges. And, lastly, this is a quietsander, thanks both to Porter-Cable's newly designed gear system, which meshesmore accurately, and to the sander's serpentine drive belt, which makesconsiderably less noise than a more common cog system. For a belt sander, thistool is surprisingly easy on the ears, and that's a very good thing. --JonGroebner ... Read more

Features

• One-year warranty/30 day performance certification
• Powerful sanding action
• Variable-speed dial
• Belt & gear drive
• Designed for flush sanding

Reviews (30)

Terrific, Powerful Sander
After purchasing -- and returning -- the Makita 3X18 belt sander, I bought the Porter-Cable 352VS (eee my review of the Makita). What a difference!

This sander is powerful. I sanded three layers of old paint off a door in about 1/2 hr. The body is constructed of metal, giving it a nice solid feel. When sanding, you can simply glide the sander back and forth, without having to push down at all. Porter-Cable came up with a design that gives you a lot of power, but at the same time control over that power. This is what a belt sander SHOULD be like.

The position of the front handle makes sense -- it is up higher than the front of the machine, so you get a good position relative to the sanding surface. The handle is also designed to give you a lot to grab onto.

The dust bag is designed well. You can swivel it in any direction to get it out of the way while you're sanding, and it holds the dust without spilling until you're ready to empty it out. Also, it does a fair job collecting the dust, but you should never expect any dust-bag system to be perfect.

The meachinism for loading and unloading sander belts is very good. It is easy to place the belt in the sander and then tighten it up securely.

The tracking system really holds the sander belt in place. I placed the belt on the sander, held it upside-down, running the sander until the belt no longer shifted left or right. Then I began sanding, and for the whole time I worked, the belt did not move from center at all. Because the housing is made of metal, even if the belt DID move, it would not damage the sander, as it would on machines with plastic bodies.

All told, this sander is a great combination of power and ease of use.

PS: The 3X21 sander belts that Porter-Cable makes (the purple ones) are excellent.

serviceman
My old belt sander stop working. I went to sears and purchased their 8.8amp belt sander. I used it for about 5 minutes and found it really did not have the power I need. So I took it back to Sears. Then I order the porta cable 352vs from Amazon. As soon as I had taken the sander out of the box I could feel a big difference. I plug the sander in and used it. It has a lot of power. I am very pleased with it. I was really shocked to feel how much more power the porta cable has over the sears craftsman. There is no question about it ,if you need a belt sander go buy the porta cable.

Good Sander, But...
I've had my PC 352vs for about 5 years, and I'd agree with most of the reviews I've read here. Plenty of power, good balance, well-made, but the dust pick-up port constantly gets clogged, and the dust bag and power cord are not positioned as well as they could be.

I've found that I can unclog the pick-up port using a blast of compressed air.

After 5 years, I wore out the drive belt and the platen was also cracking slightly, which is the only repairs I've done. Within 2 weeks of replacing the drive belt, though, I trashed the new belt when I caught the power cord in the sander and jammed the belt to a stop. (Not the sander's fault - mine).

Overall, a good, well-made (and made in USA) sander that should last a long time.

I don't really like this sander much
I have a lot of Porter-Cable tools, my dad has them too. Therefore I thought this would be a good inexpensive sander.
It's heavy which is good, it tracks well which is good, I like variable speed... BUT!
It's not balanced well. Left unto it's own weight it will favor one side over the other and sand unevenly unless you get a feel for which side needs a little more pressure. Use finer paper and take it easy. I started to develope a feel for it but never really enjoyed using it.
I now use a very old Porter-Cable 504 given to me by my dad. It's been a joy to use! $500+ new gulp! Mine's old, has been serviced and will live on.
If I were looking for a belt sander and didn't want the 504 due to preference, price, or going the used route, and I were trying to get something good within reason, I'd try a higher end PC or check another brand. I think DeWalt, or Bosch have settled those balance issues. You can feel it in your hands and hold it gently on a flat surface get an idea as to what may stay flat when the power is on.

Disappointed !!..
I bought this and was expecting a lot from sander of this quality. Well, It is really 8AMP and not 7AMP sander. I am not sure how genuine these reviews are but I had go back to random orbit sander and put this sander back in box on top shelf as I found it useless for finishing work. I would rather spent money on random orbit sander and get quality work done in short time. ... Read more

Features

• Charger included recharges battery pack in as little as 3 hours
• Easily clears debris from hard surfaces
• 2-18.0V rechargeable NiCad battery packs provide plenty of run-time
• 120 mph air speed for efficient material removal
• Large switch for easy On/Off

Reviews (2)

Quick and light, just like a broom
It's a great little product for those light jobs like blowing dirt and leaves off the patio or grass off the sidewalk after the lawn is mowed.
It's extremely easy to handle, much lighter than the large, corded "Hog" that I also own.
This product should be used to supplement, not replace, the larger, more powerful corded blower.
I found battery changing very simple and less difficult than the cordless weed trimmer I have (also a B&B product).
It was nice to not have to fuss with the 100-foot cord just to "sweep" some grass trimming. Quick and easy are the operative words.

Pretty good - but don't get rid of your corded blower
I just bought the B&D NS118 blower along with the NST2018 cordless string trimmer. I have a corner lot with long parkways and a lot of sidewalk footage, and have grown tired of dealing with up to 175 feet of extension cables for my corded trimmer and blower. I've had a nice battery-powered mower for several years, and felt it was time to go all cordless. This new pair of tools seemed promising, particularly because of the removable battery design.

After only one use I can say I'm reasonably satisfied, but not fully sold.

Handling: This is probably one of the lightest blowers available and is easy to handle. But the way the nozzle attaches is not good at all. It's difficult to remove, and the design invites finger accidents.

Power: The blower is nowhere near as powerful as my corded one. B&D refers to this as a "broom" and that's an appropriate description. It works well on surfaces where you might otherwise use a push broom. It's not good at getting leaves out of grass or flowerbeds. But in a way, the lower airflow can be better for sweeping than a corded blower. My corded one, even at its low setting, can often send debris flying all over the place. This one calmly moves stuff where you want it to go.

Battery: The batteries are compact. The blower comes with two of them, and I needed them both to complete one job. I guess I'm okay with this approach. It makes sense to lug around only as much weight as is necessary rather than carry a much heavier battery the whole time. If you buy this along with a trimmer as I did, you'll have four batteries and two chargers available for swapping. And if you happen to have a FireStorm 18v drill, you can apparently swap batteries with that system as well.

Quality: Build quality seems similar to most B&D stuff, meaning it will probably work for a few years.

Overall: Going cordless does simplify my work and save me time, but this tool isn't appropriate for all cleanup jobs. I have a month to make up my mind about keeping it. But even if it passes muster, I suspect I'll want to hang onto my corded blower for the occasional heavy job. ... Read more

Amazon.com Review

For the price, Makita's 10-inch portable table saw is a solid choice for the job site. The 15 amp motor packs plenty of power, and with a 3-9/16-cut capacity, this saw will rip four-by material on a single pass. This saw also has an electric brake, so adjustments between cuts are both safer and quicker to make. The table's a good size, too: 27 by 22 inches. We also really like the saw's new cam-lock rip fence, which is much easier to adjust than double-locking designs. The bevel adjust has a pretty good rack-and-pinion design (metal, admittedly, would be better). All in all, this saw strikes a nice balance between weight (only 40 pounds) and vibration (minimal). Simply put, the Makita 2703 is a solid saw, better for the job site (quick, powerful, lightweight) than the home shop. For the shop, we'd recommend a saw with a more accurate fence. --Jon Groebner ... Read more

Features

• One-year warranty
• Powerful 15-amp motor handles any material
• 27-by-22-inch table provides large support surface for work pieces
• Cam-locking rip fence sets quickly
• Lightweight at only 40 pounds--easily portable

Reviews (30)

depends what you want to do with it
This is not a bad saw...depending what you want to do with it. i struggled using it in my shop as my woodworking saw, for several reasons:1, what is the deal with the miter slot? it is undersized and basically useless. 2, the fence is lacking. it is ok for rough cutting, but hard(or impossible) to get any kind of accuracy out of. 3, i wish it had soft start like the 10" sliding compound miter. the saw practically jumps off the stand when you start it.
Now, if you want a lightweight, powerhouse to carry on the jobsite, this is a great choice. ripping 2X and plywood is what this saw is for. the table is too small for full sheets and lacks the capacity to rip 24". .... but man it hawgs through the 2X material.
i chose not to spend the money on a rosseau stand to increase the capacity. instead i just got a delta contractors for my shop and will use this makita for the job site. i thought about selling it, but it will be alot easier to haul the mak to the jobsite instead of my 300lb contractors saw.
so there you have it. if it meets your needs go with it. if you want a saw that will do a little of both, i recommend the porter cable.

Light, powerful, imprecise, non-standard
Strong saw, and light, and with the Porta Table has a nice fence and will cut very wide. However, the arbor is too short for dado work as large as I'd like and the non-standard miter slots limit the amount of after market stuff you can use with the saw. I'm looking to sell mine and upgrade to a more versatile saw.

If the fence were better . . .
This is a great saw in many ways. It's light, but sturdy. It's set up perfectly right out of the box, and offers easy adjustments to fine tune its performance. It's perfect to haul to jobsites, or just pull out of the garage on weekends. No other lightweight table saw is so solid, durable, and powerful.

So the fence really is a pity. It's easy to adjust and lock, but it doesn't square automatically. You have to realign it every time you reset it. And it doesn't even hold a setting, unless you clamp it in place with huge c-clamps. So it's not really suitable for any kind of fine work unless you replace the fence. Which isn't easy, because it's not a standard size, and you have to fabricate brackets. Which isn't really that difficult, but for about the same money, Ryobe makes a saw with a great fence. It's not as powerful or durable as the Makita, but since if I were doing it all again, I don't think I would have bought this saw.

Terribly inaccurate waste of money
I have been using this saw for 2 years as an on site stair builder after my employer purchased this saw against my, and my coworkers, recomendations. This saw is cheaper than the DeWalt and the Bosch, and it shows. The miter gauge was used once and found to be useless. The fence is a joke, getting it square to the blade requires a measurement from both ends of the blade, keeping it square requires no pressure against the fence. For cuts that require accuracy, more often than not, I resort to clamping a guide board to the table to ensure that it will slide, or flex, halfway through the cut. If you are looking for quality and accuracy spend the extra dough and buy a DeWalt or Bosch, the time and aggravation saved is well worth the money spent.

upsetting
Ive been a self employed for 10 years and been in construction since 1987, most of my work is custom trim,mantels and cabinets. my father bought a 8 1/4" makita saw in 1986 and i still use it today with a rousseau table,, i cant tell you how many LF has gone through that saw..well i thought it might be time for a new one , a bigger one . so i went with the makita 10" because of the deep 3 9/16" cut and the good luck a had with the last saw (as far as wear and tear, any makita table saw is useless to me with out the Roussseau table)in the past years.I also like the crank to lower and raise the blade,after years of hand turning the blade up and down this was really nice,,well when i got the saw i first took note to all the plastic parts that use to be metal, all the important parts , the gears,the crank, the lock. ive used the saw for four jobs now and the hand lock has all ready snaped off.. its very upsetting to see good long lasting tools get cheaper and cheaper..ive beaten the heck out of the last makita i had for the last 16 years, ive had this new one for 4 weeks and its already broken,,i do not recomend this saw to anyone that has to rely on it every day for work, it will not last..spend the money and buy a Dewalt... ... Read more

Features

• Five year limited warranty on machines, parts and accessories
• 3HP single phase motor
• 3-knife cutterhead, serrated infeed roller, polyurethane outfeed roller
• Anti-kickback fingers, cast iron table with adjustable bed rollers
• Knife setting gage, dust chute and deluxe stand

Reviews (2)

Great Machine
After using a portable planer for about 8 years, I decided to invest a bigger machine. This planer is identical to the DC-380 exept for a different paint job. And it is heavy!I am one of the lucky ones to have a hoist to help unload it. If you don't, have 2 or 3 helpers to unload and set it up. It took me almost two days to get it up and running. I first determined that it was too low for me, so I solved that problem by putting large wooden blocks between the bottom of the stand and the moble base. By the way, that moble base is an absolute must if you plan to move it at all. Then I discovered that the cord was too short, so I put a longer cord on with a twist lock plug. Most of my machines have twist lock plugs,anyway. When it is assembled you must be sure the infeed, cutter, and outfeed rollers are adjusted properly. There is a gage block that you must make, and the manual shows you how. The dust chute has an outlet of 5", so a trip to the local hardware store to get a 5" to 4" reducer and some duct tape, because is was not a good fit. It is essential to hook it up to a dust collecter, or you will be hip deep in chips very fast. After all was said and done, I am pleased with its peformance. The serrated infeed roller keeps the wood moving through at a steady pace, and it has two speeds, but I stick with the slow speed to get the best finish. The roller extensions eliminate snipe, once they are adjusted. If you get rough cut lumber, this is a worthwhile investment.

Good planer, trouble with dust collection.
I purchased this planer 6 weeks ago. The "dust hood" that is sold by Toolcrib for this turned out to be ( not mentioned in the catalog) to be 5". I have tried working with both Toolcrib and Delta to find a way to connect this to my 4" dust collector but, after receiving 2 more dust hoods and 2 adapters that were purported to work, I still do not have a solution. I've not had a chance to plane much wood on it yet, but it looks well made (although in China). Anyone that has found a solution let me know. ... Read more