Features

• Exclusive 3 - speed all metal transmission
• DC390 cuts 2X4's at 45 degrees in a single pass
• One-year warranty through the Dewalt factory or an authorized service center
• DC385 with keyless blade clamp for quick blade changes
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque

Features

• 1/2" metal ratcheting chuck with carbide jaws helps to prevent bits from slipping
• DEWALT built high torque motor delivers 450 in-lbs of maximum torque
• One-year warranty through the Dewalt factory or an authorized service center
• XRP™ extended run-time batteries provide long run-time & battery life
• Patented 3-speed transmission features a max 3rd speed at 1,800 rpm

Features

• On-board hose, cord and accessory storage provides convenient transport and storage
• Runs off of 12-18V DEWALT battery packs or 120V AC
• Gore TM wet/dry filter traps 99.7% of drywall dust
• Wet/dry filter eliminates changeovers
• Heavy-duty rubber hose provides durability and flexibility

Features

• User can engage contact trip lock-off and prevent accidental dis-charge of fastener.
• Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician.
• Works as fast as you do with consistent nail penetration into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints.

Features

• Includes two 1.2 Ah Batteries, 1-Hour Charger, No.2 Phillips 2" Driver Bit, Flashlight, 6pc. driver bit set and Plastic Case 22-stage slip-clutch for precision driving
• Flashlight included for illuminating the work
• Lightweight at only 5.3 pounds for easy drilling
• Heavy-duty high torque motor for optimal power
• Electronic feedback power control for high torque at lower rpm's

Reviews (3)

To Reviewer Below
In addition to not being able to read, I believe he maybe blind.There are no "blue tabs" on the photo.There is nothing but black and green.

Can you not read?
To the other reviewer, can't you read that it says "Includes two 1.2 Ah Batteries".Don't give the product a bad review b/c you can't read the specs.

BEWARE, not as pictured or advertised...
This is the DS18DVB drill. However the refurbished kit came with the EB1812 batteries, which are only 1.2Ah and the charger that came with it will only charge them, not the other 18v batteries Hitachi sells. The picture Amazon has with this item clearly shows the 2.0Ah batteries (you can tell by the blue tabs, the 3.0Ah are yellow and the 1.2Ah are all black) While it is a good drill and flashlight, I bought this kit at this price primarily to get a couple more batteries and a back-up charger. You are better off getting the kit new with the better batteries. Better still, get the kit that comes with the 3.0Ah batteries, a reciprocal saw and a circular saw. I will probably be making Amazon take this back. ... Read more

Features

• Flashlight included
• High performance motor
• 3/8" Key-less chuck
• 22 position clutch
• 2 speed transmission

Features

• Trigger controlled variable speed from 0-2900 rpm
• 5-amp motor powers through the work
• Low noise cooling air-flow design prevents overheating
• Contains ball and needle bearings for durability
• Keyed chuck holds bits securely during operation

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 550-inch/pounds of torque
• Carbide-tipped chuck jaws
• 360-degree side handle

Reviews (4)

Powerful Tool and good quality
I very much like my 24v dewalt. I use it for all my heavy duty drilling for my home.

A word of advice, it is very heavy. If you want a lighter tool then go with the 14 or 18v product. They both work well. If you can handle the weight this tool is the only drill you might need.

I think it is very well made and the unit came like new, and hasn't skipped a beat.

-need this much power? buy a corded
This drill is a heavy, monster of a bad idea. The 18v is really on the edge of being oversized, (I LOVE mine, best ever) but this thing is just plain uncomfortable. So much torque you need two hands, so much weight you will need two hands. TOO MUCH MONEY TO SPEND ON A DRILL THAT WORKS WELL IN SUCH A LIMITED NUMBER OF JOBS. Maybe a pro could find a couple more uses for this, but concrete and steel are the only uses I could figure, and for concrete, you best apt to get the dw004, of which I'm very pleased.
18v is way big enough.

plenty of power short term
This kit doesnt come with any extra batteries and when you use it constantly you will have to take a 1 hour break so that you can recharge your batterie and it has been very difficult to find extra batteries (which are about ...). I wish that I had never bought mine.

Great drill
Excellent two in one tool with plenty of power for any job. It is very well balanced with good feel and its hamemer is at ease in fast penetration of brick, block, stone and concrete of most compression strengths, aggregate compositions and ages. Quick charge system as well. Only downside its price, but you get what you pay for. ... Read more

Features

• 0-2,800 spm, 7/8-inch stroke length for fast cutting
• Lever action keyless blade clamp
• 3-speed all metal transmission, VSR 1-450/0-1,400/0-2,000 rpm
• DeWalt-built high-torque motor delivers 450 in./lbs. of torque
• 1/2-inch ratcheting chuck with automatic spindle lock

Features

• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 3/8-inch square drive with hog ring retention
• Factory reconditioned to perform like new!
• 1,200 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas

Features

• Dual side-by-side laser diodes for an extremely bright, visible beam
• Protected rotary head and side impact roll cage for increased durability
• Built-in bump sensor alerts user if laser has been bumped after leveling
• Factory reconditioned to perform like new!
• Manual leveling system is accurate to + or - 1/4" at 100'

Features

• 0-2,800 spm, 7/8-inch stroke length for fast cutting
• Lever action keyless blade clamp
• 3-speed all metal transmission, VSR 1-450/0-1,400/0-2,000 rpm
• DeWalt-built high-torque motor delivers 450 in./lbs. of torque
• 1/2-inch ratcheting chuck with automatic spindle lock

Features

• User can engage contact trip lock-off and prevent accidental dis-charge of fastener.
• Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician.
• Works as fast as you do with consistent nail penetration into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints.

Features

• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 1/2-inch square drive with hog ring retention
• Factory reconditioned to perform like new!
• 1,400 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas

Features

• All metal planetary gears for increased speed and durability
• Lightweight design (5.2 lbs.) for reduced operator fatigue
• High performance motor delivers 400 in.-lbs. of maximum torque for big jobs
• Dual speed range: 0-450 / 0-1,500 rpm for versatile performance
• 1/2-inch keyless ratcheting chuck for increased gripping strength

Product Description

Includes (2)--2.4A-h Batteries, (1)--1 Hour Charger - BC004, (1)--Rip Fence, (1)--Mag Bit Holder - 2610917319, (1)--Side Handle - 2602025126, (1)--Bit Case - 2610915997, and (1)--Carrying Case - 2610917460. ... Read more

Features

• Auxiliary handle
• BOSR9
• 18Volt
• (2) 2.4a-h batteries
• 1 Hour Charger

Features

• 6.3 pounds
• 1 Hour charger
• 14.4 Volt
• 3 1/4"
• Ratcheting depth knob

Features

• Long run time
• Consistant discharge
• 18 volt battery
• Ni-Cad
• 2 Amp/hr

Features

• Accepts 14.4 and 18 volt batteries
• Tilting Head
• 3 hours of use

Reviews (2)

make sure you purchase a battery
used this as a filler to get super saver shipping.Surprised to see it arrive without a battery.

Avoid this turkey and buy a 4-LED flashlight
I have one of these flashlights that came w/ my Hitachi 14.4 cordless drill.It's very flimsy, and the light bulb burnt out in two months.The replacement bulbs cost between $4 and $5 EACH!Avoid this turkey and buy an LED flashlight (search for "4-LED flashlight" on amazon.com) that does not require replacing of bulbs. ... Read more

Features

• 1 Hour Charger
• Carry Case
• 24 volt
• Dual Stroke 1 1/4" & 3/4"
• (2) 2.4A-h Batteries