Features

• Exclusive 3 - speed all metal transmission
• DC390 cuts 2X4's at 45 degrees in a single pass
• One-year warranty through the Dewalt factory or an authorized service center
• DC385 with keyless blade clamp for quick blade changes
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque

Features

• 1/2" metal ratcheting chuck with carbide jaws helps to prevent bits from slipping
• DEWALT built high torque motor delivers 450 in-lbs of maximum torque
• One-year warranty through the Dewalt factory or an authorized service center
• XRP™ extended run-time batteries provide long run-time & battery life
• Patented 3-speed transmission features a max 3rd speed at 1,800 rpm

Features

• Head and handle swivel 360 degrees for easy drilling in tough spots
• Factory reconditioned to perform like new
• Designed for drilling between joist, studs, in tight corners, or in close quarters
• 0-355 rpm on low, 0-750 rpm on high, and 0-500 rpm with right-angle drive removed
• Trigger speed control for precise applications

Reviews (2)

wrong drill
I ordered the 3107-8 because it has two variable speed settings- 0-355 and 0-750. The carrying case said model 3107-8 but inside was a model 1107-1 which is 0-500 RPM only. Very disappointed.

Milwaukee 1/2" Right angle Drill
An elcellent drill to be used in those tight corners and spaces where any other drill & bit will no go. Right angle head rotates through 360 degress to aid in those tight spaces. With the ability to drill stright as well this "specialized" tool is not. Typical Milwaukee construction. Just finished a 3500 sq.ft. home wiring job. Worth every penny and then some for timely completion especially with owner changing partitions nearly daily.

Top recommendation. ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 6.2 amp motor
• Helical-cut steel, heat-treated gears for smooth operation
• High torque for deck building and drywall

Reviews (1)

Good Product
Nicely balanced, plenty of power, and comfortable and a great price. If you are doing strictly drywall you may prefer the DW251R (0-4000 rpms) vrs the DW257R (0-2500 rpms). ... Read more

Features

• Ideal for working in tight spaces where a full size drill doesn't fit
• Factory reconditioned to perform like new! Limit one per order.
• 3.5 amp motor, 0 to 1300 rpm, trigger speed control with reversing
• Heavy-duty industrial chuck
• 55-degree angled chuck for easy access to tight places

Reviews (2)

Close quarters
I resently went into business for myself installing cabinets.I have struggled for months with other drill / drivers to drill holes or drive screws in small or tight cabinets. THIS IS THE PERFECT TOOL FOR BOTH. Also great for removing cabinet door from there hinges. Buy one for yourself, or two. Give one to your helper for Christmas, or his/her birthday. My female partner loves it. She say's "Very easy to handle, but hold on, it has power."

Milwaukee Close-Quarter Drill, 3/8", Reversible, Var. Speed
This is a super drill design which is a copy of the original SIOUX close quarter drill used in airplane factories. Improvements in the Milwaukee model are (1)variable speed, (2)instant reversing, (3)lighter weight, and (4)isolated from electric shock. It is so perfectly balanced and quiet, it is a joy to use. ... Read more

Features

• Helical cut steel, heat treated gears for long gear life
• Factory reconditioned to perform like new!
• 7.8-amp motor with variable speed
• Jacobs-keyless chuck with spindle lock provides greater holding power
• Rubber grip and two-finger rubber trigger for increased comfort

Features

• Fasten drywall and wire lath to 20-25 gauge metal studs and wood stud, 20-25 gauge studs to track
• Factory reconditioned to perform like new!
• Metal gear housing for increased durability
• Depth-sensitive "set and forget" nosepiece for consistent fastener depth
• Rubber grip and two-finger rubber trigger for increased comfort

Features

• Two-finger rubber trigger for increased comfort
• Factory reconditioned to perform like new!
• 7.8-amp motor with variable speed
• Helical cut steel, heat treated gears for long gear life
• Metal gear housing

Features

• All metal planetary gears for increased speed and durability
• Lightweight design (5.2 lbs.) for reduced operator fatigue
• High performance motor delivers 400 in.-lbs. of maximum torque for big jobs
• Dual speed range: 0-450 / 0-1,500 rpm for versatile performance
• 1/2-inch keyless ratcheting chuck for increased gripping strength

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Compact size and weight, only 3.9 pounds
• DeWalt-built Series 3000 motor delivers 300 in./lbs. of maximum torque
• 3/8" keyless ratcheting chuck
• Dual range VSR and 0-400/0-1,400 rpm

Features

• Powerful, yet compact for large hole drilling between joists and studs
• Factory reconditioned to perform like new! Limit one per order.
• Handles up to 4-5/8" selfeed bit
• Two speed: 300 and 1200 rpm; reversing
• Powerful 7.5 amp motor

Reviews (3)

Reliability and Power to Spare!
This Milwaukee Hole Hawg is by far the best drill on the market for pure and simple day-in, day-out reliability and power. I really takes a beating, and has enough torque to twist the top off the Super Dome (well, maybe not quite)! With self-feeding bits, this drill does an exceptional job of knocking out holes for any plumbing or electrical rough-in. I've dropped it, it's been rained on, bounced around in the back of a truck, and otherwise subjected to the "normal" job site wear n' tear, and it continues to perform flawlessly. The only negative word I might utter is that it is heavy. Holding this guy over your head for the day can get old. But a small price to pay for the power and reliability this tool offers.

plumbers friend
As a plumbing contractor for 25 years we started using this model when it first came out in the early 80's. Compact, quick and powerful. We tried the makita copy of the milwaukee when it came out in the late 80's but it had a clutch that activated too easily, so you couldn't finish a tough hole with it. Very frustrating with the Makita. the Milwaukee has no clutch so you have to be careful about the torque. We throw away both the t handle and pipe handle extensions as we have never used them. The trick to controlling the torque is to snuggle up to the drill and keep it close to your body. That way if it jams your body soaks up the torque not just your arms. Also, we drill large holes [toilet flanges etc.] on high speed using hole saws. The drill has less torgue to whack you with at high speed. We wear them out mostly drilling toilet flanges when they jam on deep cuts, resulting in gear rebuilds, but it takes several years of brutal use to get to that point. very compact for the power.

the "only" drill for plumbers
I have used these drills for over 15 years installing plumbing in new construction and have tried just about every other type and brand of drill. None of them comes close to the "Hole Hawg". Beware that this drill is very powerful and should be operated with extreme caution. ... Read more

Features

• Belt Clip
• 4.8 amp
• 0-2,500 rpm
• Snap off nose piece
• Magnetic bit holder

Features

• Auxiliary handle
• 6.5 amp
• 0-1,100 rpm
• Variable speed
• Keyed chuck

Features

• Six-month warranty on Delta Reconditioned Tools
• Five speeds from 620 to 3100 rpm for drilling a variety of materials
• Adjustable depth stop for repetitive drilling
• Cast iron table tilts 45 degrees left and right for angled drilling
• Rack and pinion table raising mechanism

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• Features: quiet clutch for non-ratcheting screwdriving
• 6.0 amp motor
• Helical-cut steel, heat treated gears for smooth operation

Reviews (2)

GREAT PRICE!!!
With a full one year warranty,Dewalt excellent customer satifaction,& outstanding AMAZON.COM service,YOU CAN"T GO WRONG!!!Dewalt makes the best drywall screwguns.I own 4 and will continue to remain a loyal Dewalt/Amazon customer...What are you waiting for,Purchase this item now...

Best "GUN" for the dollar!!!
I prefer the dw272 over "ALL" drywall screwguns for "WOOD"frames.On the other hand,at this price,how you a serious professional resist.You get a "1" ONE YEAR Manufactures warranty which is equal to a brand new Dewalt srewgun.Dewalt backs ALL thier products well.On top of that AMAZON.COM is #1 for customer satisfaction!!!!What are you waiting for,pruchase now & thank me later... ... Read more

Features

• Metal gear housing for increased durability
• Factory reconditioned to perform like new!
• Anti-lock Control electronic control system
• Helical-cut steel, heat-treated gears for increased durability and long life
• 360-degree side handle for greater control

Features

• Capacity to frame steel studs to 20 gauge
• Factory reconditioned to perform like new!
• High speed, 0-5,300 rpm for productivity and speed
• "Set and forget" nosecone eliminates unneeded adjustments
• Ergonomic features include finger grooves and two-finger rubber trigger

Features

• Auxiliary handle
• 6.9 amp
• SDS-Plus
• Variable speed
• Vario-Lock positioning

Features

• hammer drill/drill only modes
• Factory reconditioned to perform like new! Limit one per order.
• 1/2" chuck capacity
• 0-1.000rpm/0-16,000bpm
• 0-3,000rpm/0-48,000bpm

Reviews (1)

Are you feeling HOT HOT HOT
Used it for 10 minutes - got hotter than the dickens. Returned it for a Dewalt 505. Much better. ... Read more

Features

• Belt Clip
• 4.8 amp
• 0-2,500 rpm
• Variable speed trigger
• 3.5 pounds