Amazon.com

Here comes power and efficiency in a great compact size. Before you even press the trigger, you'll love how this tool fits in your hand, how well-balanced it is. The rubberized grip gives you a sure, comfortable hold, even at odd angles. Performance is top-notch, thanks to dual ball bearings, precision balancing and a refined high-grade field magnet. We're really impressed by Makita's exclusive Shift Lock Drive. With a single touch, you shift quickly and easily "drill" to "driver" mode, locking out the clutch for superior drilling. And we love it when manufacturers include two batteries with their tools, because that means no down time. The charger handles multi-volt batteries, too, so it's good for a wide range. Maintenance is simple because the brushes are accessible. A great, hardworking drill/driver.--Kris Jensen-Van Heste ... Read more

Features

• Includes side handle, bits, 2-batteries, charger and case
• Powerful 18-Volt Ni-MH batteries for longer run time
• Industrial metal gear housing and "high performance" Makita motor for long lasting durability
• 404 in.lbs. torque with16 torque settings
• Industrial 1/2" keyless chuck and externally accessible brushes for easy replacement

Reviews (7)

shock and awe, in a blue package...
Disregard all unfavorable reviews...this drill is yet another work of art from Makita! Perfect ergonomics and balance, even with a hefty 18V battery you still get incredible control and precision, instead of sweating and straining to keep the darn thing perpendicular to the drilling surface as with cheaper drills. This is my second Makita drill, the first one was a smaller 14.4v which I'll pass on to my wife because it's lighter.

I love America, born and bred, but gotta hand it to the Japanese: when it comes to anything electric (or gasoline-powered, for that matter) they kick our butts left and right! Sony TVs, Toshiba laptops, Lexus autos, Honda motorcycles...anything that doesn't blow up things and kill people, the Japanese simply have perfected.

Have used DeWalt drills before, they were just a little bit better than Black and Decker (the mother company) which doesn't justify the big price jump. Porter Cable has good power but tends to weigh a ton and their chucks are spotty.

Viva Makita!

solid drill with a few caveats
This is my third makita drill so I consider myself biased. I don't use it all day but I need a quality drill for household repairs. The electric makita drill I've had now for fifteen years and it still runs fine. My second, I bought one of those 9 volt drills when the first cordless drills came out. I good drill but it's for light work. The batteries on this I've used all day without a recharge, alot longer than the models a few years ago. I've had problems with the chuck though. On many occasions the drill bit will come loose with smaller bits. The cap has come loose. Still it's put up with all the abuse I've given it.

smoked and croaked
After using the makita for 6 months it smoked and croaked. I was unscrewing deck boards and after a hour and 1/2 I noticed it getting warm then suddenly began to smoke. My work partner was using a Miluakee 18 volt and it kept at it all day.

ALL THE POWER YOU NEED!
The Shift Lock Drive System is the easiest clutch lockout I've ever used. Two 2.6 amp-hour batteries and the quick charger can keep you going with out delays. Balance and the light weight make this easy to use, the 18-volt power makes it a pleasure.

Dissapointed
Transmission broke after three months of use. Had to buy a Porter Cable while I wait three business days for mine to be repaired. Being a diehard Makita guy I should have learned by now that while their saws and such are great, the drills still need alot of work. Too expensive for homeowner use, and kinda weak to rely on for the professional. ... Read more

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 15.6-volt drill/driver fits into tight spaces where other bulkier drills won't. The 3-1/2 amp NiMH batteries deliver remarkable run time per charge, which is a big plus, especially if you need a tool for continuous use. What about power? This Panasonic packs up to 390 inch-pounds of torque--as much (if not more) than anyone needs in a cordless tool. The motor's speed control allows full torque at any speed, so you can apply full torque while still maintaining control. The tool features dual speed ranges of 65 to 450 and 200 to 1,450 rpm. The 1/2-inch chuck takes bigger bits. The first thing you notice about this tool, however, is how compact it is (the chassis measures only 8-1/2 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the tool's balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. The 3-1/2 amp batteries are ventilated, so they last longer, delivering up to 1,200 charges and recharges. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes a 55-minute universal charger and hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Compact and lightweight for all-day use
• Two 3.5 amp Ni-MH battery packs for longer run time
• Delivers 390 in./lbs. of torque
• 1/2-inch keyless chuck offers big-bit capacity
• 55-minute charge saves time

Reviews (27)

The Best Kept Secret in Cordless Drills
I've owned or used a lot of cordless drills, from Black and Decker (ugh), Porter Cable, DeWalt, Milwaulkee, Makita and others, but I'd never heard of the Panasonic until a friend who does a lot of decks introduced me to it. He was using the earlier 12 volt model, but everything I discovered in using that drill applies to this one as well.

Panasonic isn't thought of as a power tool company, but their cordless drills are the best I've ever used, bar none. They've got the fastest recharge rate- 15 minutes- and that translates to more time drilling and less time recharging. It also translates to longer battery life; the less time spent charging, the less the heat buildup, and that's what kills these batteries. I know my friend has been using his on a daily basis for over five years with the original battery. The Panasonic drills also seem to get more useful drilling out of a single charge, something that recent tests by one magazine confirm.

My current 1/2" Makita is still going strong, but if it should happen to give up the ghost, I'm replacing it with a Panasonic.

Best Drill - but battery life question
I purchased the original 3.0 amp-hour 15.6 drill in winter 1999. The drill has always perfomed flawlessly and easliy had the best run time in comparison to 12 volt Makita's and 14.4 volt Dewalts I had used previously. I built two small boats out of white oak with this drill (all drilling and screwing) as my only drill. This included numerous 2 1/2" hole sawing through 3/4" particle board temporary framing. The drill is awesome.

My "but" comes with the battery life. Both of my batteries were shot by early 2002, with a total life of just over 2-1/2 years. There is no way I put 1,200 charge cycles into these batteries, more like 2 charges per battery per week. The run time usually last for almost a full day of boat work. That equates to approximately 260 charges. I dont know why Panasonic is advertising 1,200 charges I know my previous 14.4 Dewalt was slightly better for battery life, but the old Makita was much better. Is it the Ni-Mh battery that does not hold up over time, or maybe the batteries should always be inside, not in the varing temperatures of the garage.

With that said, I will be purchasing the new 3.5 amp-hour version. I just get irked that 2 replacement batteries cost as much as the whole new kit. Panasonic should make new batteries more affordable, because now I have two great drills and chargers, but only 2 batteries. Yup, bend over for the "lord of the landfill".

Highly Recommended
One of the top tools I have ever purchased. Runs like a sewing machine. Plently of power, it has never stalled out, and I have been using it for over one year. The chuck is excellent. The drill is light weight and easy to hold over long periods of time.

A terrific tool
Amzingly powerful, I've never been able to stall it. I have yet to run a battery dead, even after heavy use, I just recharge 'em anyway, and they don't lose charge when idle.

I misplaced it in New Jersey, and was without it when I needed to drive some screws. All I had at hand was my good 'ol Milwaukee half inch, corded. I sure missed the light weight and power of the Panasonic and the instant electric brake. The huge motor of the "big Red one" seemed to coast forever after releasing the trigger.

Got my EY6432 back a few days later, and sold the Red one I'd had for 10 years on eBay! (for $90)

The Panasonic has so much power, I'll not need a cord drill ever again.

A great deal
Powerful and precise, no slipping, and gets into every nook, cranny and corner. This PANASONIC CORDLESS is indestructible. I can't tell you how many times I've dropped or knocked this thing over. I've used it on my car, on just about every part of my house. And for the price that Amazon is asking, every professional or handiman should have one on their workbenches. ... Read more

Features

• Includes NST2018, NHT518, NS118, 3-18 volt batteries, a 3-port charger, the storage station and all wall mounting hardware
• Easily mountable storage station that makes all three products easily stored
• All products use the same 18-volt batteries
• Battery charger can charge all 3 included batteries at the same time
• Part of the Black and Decker 18-volt products' system

Reviews (5)

Black & Decker CCC3000 does what it says it'll do
I have an acre lawn with lots of landscaping, and this is perfect for my needs. It does take more than one battery pack to trim my whole yard, but with 3 interchangable packs, it is no challenge for it. And with 18 volts, the power provided is more than adequate for the yard. The blower is powerful and makes my yard look much neater, and the hedge trimmer is great. Along with an edge hog electric edger I purchased this year, I have all the tools to make a manicured lawn. You can't beat the price of this set of tools either. All 3 items can be purchased seperatly, but you'd pay quite a bit more for them doing that.

Does Just What I Want
Tried all three units. The guard on the trimmer serves as a trim guide. The trimmer cuts through the suckers that sprout at the base of harvested trees. The blower is just fine for clearing debris from the porch and deck. Can't get much easier. Don't worry much about dead batteries. With the three supplied, normal use is not a problem. If I REALLY want heavy duty (for the few times I need it) gas is the way to go. But who wants the stink and bother?? For the price I paid, my son was amazed the wacker had an auto line feed.

Great tools, great convenience
The tools themselves worked great. I was pleasantly surprised at how powerful the blower was. The line trimmer did an acceptable trimming job, and actually did great at the edging work. The hedge trimmer make quick work of my low hanging tree branches.

I loved the convenience of the two hanging units, one for the tools themselves, and one for the charging unit. Helps to keep an organized garage.

Highly recommend this set for the typical homeowner.

very happy and pleased
Have used this set for the first time the other day and am very happy to say all three tools work great. the ease of use of cordless is just fantastic! The trimmer worked great on ivy and though I feel a little like I sold out with the blower (can't stand the pollution; noise and exhaust) it is quiet and if used responsibly is great to have for those hard to reach/sweep areas. I would highly recommend.

great "bang for the buck" for the AVERAGE home-owner
for the owner of a "modest" yard,..this is an INCREDIBLE bang for the buck. the weed trimmer and the hedge trimmer did their jobs excellently and the sweeper exceeded my expectations to the Nth degree. ALL THREE tools were up-to-the-task of trimming, hedging, edging and sweeping. i was MOST concerned about battery life. i manicured my entire yard with ALL THREE tools with nary a gasp from the battery (15-20 minutes use from each,..NOT counting pauses between "uses"). the package comes with a 3-station battery charger AND a "hanging station" for all three tools (PLUS,..you can pick up an extra 18 volt battery or two at your local megastore IF you need it [for large yards]). i could not be happier.....weeds and grass got whacked, my various hedges got trimmed AND my carport and driveway were cleared of debris in a matter of moments. AND....THE NOISE....DID I MENTION THE NOISE??? THAT'S BECAUSE THESE ARE VERY QUIET, NEIGHBORHOOD-FRIENDLY POWER TOOLS. i am quite satisfied and would HIGHLY recommend the CCC3000 kit to ANYONE with "fairly" modest lawn care needs. ... Read more

Amazon.com

Power, power and more power! The 18-volt 1/2-inch hammer drill/driver's high-torque motor churns out an impressive 500 inch-pounds of torque—imagine the jobs it could tackle. We were surprised by how good it feels in hand, thanks, we think, to its neatly balanced design that places the handle toward the center of the tool. A nice touch is the ratcheting chuck with carbide jaws for a superb hold on your bit. And the all-metal, three-speed transmission is so innovative that DeWalt patented it. All we know is that this is one powerhouse of a hammer drill/driver, no matter what mode it's in. The DC385 recip saw's keyless blade clamp wins points in our book for fast blade changes. And talk about fast—with its one-inch stroke length, it runs at 2,900 strokes per minute. Like the drill, it's well balanced and feels good in hand. It's compact, lightweight and offers great cutline visibility through the pivoting shoe's open top. Plus, we like that the blade will reverse for flush and plunge cutting. The circular saw slices into 2x4s like butter, and you can always see your cut because the blade's on the left. Bevel cuts are no sweat; the saw's easy to adjust and the scale's clear. If you're often working in tight spaces, you'll appreciate the design of the right-angle drill, which spans just 4-1/2 inches. Still, it's got two speed ranges (0-500 and 0-1,500 rpm) and reverse, and it packs 310 inch-pounds of torque. We like the multi-grip trigger, especially for cramped quarters. The grinder's hardworking with a nice three-position side handle. Kudos to DeWalt for the metal gear case and the longer life it'll give this grinder. Finally, the flashlight's neck is super flexible, shedding light in just about any direction for up to three hours. This is a great collection of tools, essential for the contractor and perfect for the skilled do-it-yourselfer.--Kris Jensen-Van Heste ... Read more

Features

• Ultra-light, 4-1/2-inch long right angle drill delivers 310 in.-lbs. of torque for ample power in very tight quarters
• Kit also features a cut-off tool for cutting and grinding, a flexible neck flashlight and more
• 1/2-inch drill/driver/hammer-drill with 500 in.-lbs. of maximum torque for heavy-duty applications
• 6-1/2-inch circular saw cuts 2- x 4-inch stock at 45 degrees in a single pass for speedy framing, decking and more
• Reciprocating saw with keyless blade clamp for quick blade changes

Amazon.com

This is easily one of the most powerful hammerdrills on the market, packing 500 inch-pounds of torque and tackling the largest holes and heaviest screws. Whether you're going into studs or concrete, you'll appreciate the patented three-speed transmission that delivers an amazing 2,000 rpm at its max. In hammerdrill mode, get ready to be impressed with the speed you drill into concrete and other masonry at 34,000 blows per minute. Every inch of this tool is quality, from the 1/2-inch metal ratcheting chuck and its carbide jaws to the super-comfortable grip and beefy extended-life XRP 18-volt battery. Balance in hand is awesome, and the 360-degree auxiliary handle adjusts easily to just the right position.

The DC385 recip saw's keyless blade clamp wins points in our book for fast blade changes. And talk about fast—with its one-inch stroke length, it runs at 2,900 strokes per minute. Like the drill, it's well-balanced and feels good in hand. It's compact, lightweight and offers great cutline visibility through the pivoting shoe's open top. Plus, we like that the blade will reverse for flush and plunge cutting.

The circular saw slices into 2x4s like butter, and you can always see your cut because the blade's on the left. Bevel cuts are no sweat; the saw is easy to adjust and the scale's clear. The jig saw's got some great features, the best of which is a keyless shoe that slides back and forth for cutting flush in tight spaces. The grip is super comfortable, and we like that you can choose between two orbital settings for quick, accurate cuts in soft stock and a straight setting for metal and other hard material. You'll love the built-in dust blower that keeps your sightline clear. The floodlight's handy, too, especially with its flexible neck for illumination in just about any direction. It's a great package deal.--Kris Jensen-Van Heste ... Read more

Features

• DW933 variable speed jig saw accepts both universal and T-shank blades
• DW919 18-volt flexible floodlight for hands-free use
• DC988 18-volt XRP 1/2" hammerdrill/drill/driver with 500 in-lbs of maximum torque and patented 3-speed all-metal transmission
• DC390 18-volt circular saw with 6 1/2", 16-tooth carbide blade and rip fence can cut 2x4's at a 45 degree angle in a single pass
• DC385 18-volt cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft

Amazon.com

Power, power and more power! The 18-volt 1/2-inch hammer drill/driver's high-torque motor churns out an impressive 500 inch-pounds of torque—imagine the jobs it could tackle. We were surprised by how good it feels in hand, thanks, we think, to its neatly balanced design that places the handle toward the center of the tool. A nice touch is the ratcheting chuck with carbide jaws for a superb hold on your bit. And the all-metal, three-speed transmission is so innovative that DeWalt patented it. All we know is that this is one powerhouse of a hammer drill/driver, no matter what mode it's in. The DC385 recip saw's keyless blade clamp wins points in our book for fast blade changes. And talk about fast—with its one-inch stroke length, it runs at 2,900 strokes per minute. Like the drill, it's well balanced and feels good in hand. It's compact, lightweight and offers great cutline visibility through the pivoting shoe's open top. Plus, we like that the blade will reverse for flush and plunge cutting. The circular saw slices into 2x4s like butter, and you can always see your cut because the blade's on the left. Bevel cuts are no sweat; the saw's easy to adjust and the scale's clear. The grinder's hardworking with a nice three-position side handle. Kudos to DeWalt for the metal gear case and the longer life it'll give this grinder. We're not as impressed with the impact gun, despite its 0 to 3,000 impacts per minute and how smoothly it runs without any kickback—-it's just that we'd like to see it take more than ¼-inch hex shanks. Finally, the flashlight's neck is super flexible, shedding light in just about any direction for up to three hours. This is a great collection of tools, essential for the contractor and perfect for the skilled do-it-yourselfer.--Kris Jensen-Van Heste ... Read more

Features

• Lightweight, 6-1/2-inch long impact driver delivers 1,170 in.-lbs. of torque for optimal power in tight quarters
• Kit also features a cut-off tool for cutting and grinding, a flexible neck flashlight and more
• 1/2-inch drill/driver/hammer-drill has 500 in.-lbs. of maximum torque for heavy-duty applications
• 6-1/2-inch circular saw cuts 2- x 4-inch stock at 45 degrees in a single pass for speedy framing, decking and more
• Reciprocating saw with keyless blade clamp for quick blade changes

Features

• Equipped with a Fluorescent Light for greater visibility
• Powerful 15 amp motor that handles every job easily.
• Electronic Speed Control monitors and maintains rpm under load.
• Soft Start feature for smoother and safer start-ups.
• Large turn base ensures a more stable work area.

Features

• DC410-6,500 RPM, 5/8"-11 spindle, ball bearing construction
• Type 1 (cut-off) and Type 27 (offset center) guards included
• DC988-DEWALT built motor for 500 in-lbs of maximun torque
• XRP Extended run-time batteries for long run-time and life
• DC988 - Patented 3-speed transmission: 0-450/0-1,450/0-2,000

Reviews (1)

Good Combo Hammer Drill and Cutoff Tool
I bought this kit mainly for the cutoff grinder tool.I have been using the cutoff tool as a grinder and it works great.This is for a field application were I needed cordless and this has lived up to my expectations.The battery life is good, the wieght and feel of the tool is great, and it is easy to use. Power for a cordless 4 1/2" grinder is excellent, you can lean pretty hard on it before it stalls, but remember it is cordless.The drill works well however I havn't used it enough to comment.Dewalt cordless tools are not cheap, however a good value. The reason for 4 not 5 stars is I want to see how long it lasts. ... Read more

Amazon.com

You need power, but you don’t want to hoist a ton. Here’s the answer. DeWalt’s revamped 18-volt compact drill/driver delivers on both counts, with a 1/2-inch chuck that grips beefy bits, an 18-position adjustable clutch, and a high-performance motor for the torque you need, packaged in a truly lightweight, comfortable drill. The variable speed has a high and low range for any application, and the reverse switch is right above the curved trigger for easy access. The included charger juices up a spent battery in an hour. We especially like the light weight, even more so because it doesn’t cost in the power department. Lots of pluses: on-board bit storage, two batteries, hard case. We think contractors will be pleased with this drill, especially after a long day.--Kris Jensen-Van Heste ... Read more

Features

• 1/2" single sleeve keyless ratcheting chuck for tighter bit grip
• Compact size: fits into the tightest conditions
• Lightweight design (5.2 lbs.) minimizes user fatigue
• High performance motor delivers 450 in.-lbs. of maximum torque
• Dual speed range: 0-450 / 0-1,500 rpm delivers optimal performance

Reviews (8)

Four Years' Tough
I have two of these drills. Have used one or the other of them daily for three years this month. About time for a review. They are tough. I do not understand the comments about weak chucks or, in other places, about battery problems. My drills, their batteries and chargers have performed, as I say, on a daily basis for three years under all kinds of conditions and some very hard use without so much as a glitch. They have tremendous torque and staying power under continuous use. If you are going to shoot large screws or drive a big bit rapidly into very hard or though wood, brace the drill-driver's grip, battery end against your knee or thigh before you squeeze the trigger. You will have fewer wrist problems if you do--it has that kind of torque. Regarding one complaint, I would not use this driver with tiny drill bits; it just is not intended for that. It defies logic to do so. What it will do is take the heaviest work and drive large bits and sink big screws all day and just keep on going. An example: In the intense, 100 degree plus heat of one summer, two carpenter friends and I laid a 1700 sq foot subfloor of 2X6 T&G over 16" OC joists with two 3-1/2 inch screws to the joist, working as fast as we could all day for what seems now like several days. The wood was very tough, dense struc select Doug fir. When my two friends' drivers, one a Makita and one a Hitachi, got hot as pistols or their batteries needed recharging, whichever of the DeWalts I happened to be using could keep right on going. I would lend the other DeWalt to either guy while his driver recovered. I smoked those batteries, but by following the right charging procedures never had a failure. They both still take deep cycle charges and hold them well, after three years of hard use. One took a fourteen foot fall off a roof while mounted to another DeWalt tool, the battery taking the full impact on tamped crushed rock, and it still works as well as the others. Just read the instructions and you will not have trouble with the batteries. Quick charge when you have to, but balance that with long charges from a low state over the weekends. Never use the batteries while they are still warm or hot out of the charger, do not run them out completely--just nearly so, and do not repeatedly shallow charge them. Nicads will not last long with that kind of treatment. They take a "set" and will not charge deeply afterward. As for weak chucks, well, one incident does not make them all that way. When my drywall zipgun stripped its chuck, I picked up one of my DeWalt 18V drill-drivers and kept on going--for over 300 sheets of 1/2 and 5/8 inch drywall. The clutch and speed mechanisms work well enough that I had good control and could hang drywall almost as fast as with the zipgun. One caution regarding the clutches on these brutes: they require breaking in; don't be upset if they are hard to use at first. You can see from this what DeWalt 18V drill-drivers have done and can do, and still I have not had the slightest problem, though they look pretty beat up now. I do not think a single work day has passed in which I have not used one of the two. Now I have a whole lot of DeWalt HD 18V tools, because these two drill-drivers performed so well I was not afraid to buy into a lot of tools in the same line. I have had no trouble with any of them. You never lose them, either; that DeWalt yellow shouts at you from across the room, across the lot or from under a pile of tools and offcuts. When these go, I will buy more.

Great drill/driver
I have had this drill for about six months and am very happy with it. I am a homeowner so I can't speak as to how this drill would function during all day use. For projects around my house it has plenty of power although, like every other cordless tool I have used, it needs a little more time drilling/driving through hard wood. If I want to drill through something thick and tough, I used a beefier corded drill. So far, I have not noticed any of the battery life problems discussed by other reviewers.

I picked up a set of the Dewalt hex shank bits and have not noticed any slippage. The only time I have had a complaint with the drill was while using a hole saw to install locksets in two doors. Of the four holes, the bit slipped out of the chuck two times. Once I reinserted the hole saw it went right on through the door. I don't know if I didn't get the chuck tight enough or if the chuck just prefers the hex shank bits.

All in all a great drill. I can't imagine ever installing curtain rods, assembling bookcases, etc. with a corded drill and/or screwdriver again!

Yet another over-priced, under-achiever from big yellow
This drill is, in short, a dud. I bought it somewhat hesitantly on the recommendation of a friend. I had been looking at this and the Milwaukee and Bosch equivalents but went ahead and took the plunge. What a mistake. It seems to have sufficient torque but the chuck started to wobble almost immediately after only a few weeks of light use. It makes a grinding noise in the low speed setting that I can't seem to find and one of the batteries ... died after only 2-3 months use. Since then the charger .... has also given up making it cheaper to buy a whole new kit (probably what dewalt has in mind anyway). I have since bought the Milwaukee 0624-20 (kit 0624-24)and have been abusing that workhorse for over a year now with phenomenal results while this piece of crap collects dust on the shelf. Not only are the batteries ..... and charger .... cheaper to replace by some $40 but they also last a _lot_ longer. I wish now I had gone with my gut instinct in the first place. Save yourself a lot of grief and money and go for the Milwaukee. You will not be sorry.

quaility control
i have owned three of these drills over the last seven years,i was very impressed the first time i used the 18 volt drill about five years ago and immeadiatly bought one. since that time i have noticed a serious decline in craftsmanship and customer service on DeWalt's part. the chucks spin on expensive drill bits damaging the bit,the battery packs seem to have unreliable longievity issues. the final straw was a blown charger after approx. 40 hrs. plug in time,right in the middle of a elaborate garage remodel. i am going to start phaseing out my DeWalt cordless tools in my personal tool chest as well as the ones owned by the Parks and Recreation Dept. I am in charge of.

Good drill for the money
I purchased this drill as part of a drill/saw combo at Home Depot for $199 so go there for a better deal. I bought this drill to compliment the 18V Dewalt pistol handle drill I already have.

I know what your thinking, why do I need two drills? Have you every tried to drill/drive in between stud cavities with a pistol grip?? Pain in the bottom to do, so when I have that type of work to do I just grab this one, now onto my review.

Plenty of power for anything you may want to do, drives screws like a champ, drills through 4x4 PT with 1 1/2" spade bit with no problems. A great drill at a great price. Since I own their more expensive model I will point out the differences. No hammer action, only 2 speed(don't need the third speed), 2 piece chuck versus the 1 piece, and the handle doesn't have those nice rubber inserts.

Doesn't handle small bits that well due to the chuck design, and the trigger sticks a little when trying to slowly advance it.
One piece of advice, before you even use the drill for the first time grab some athletic tape(Walmart sells black athletic tape so it doesn't look retarded) and wrap it a couple of time around the handle. That improves the grip 100%, trust me.

Even though I did bash some things this is still a awesome drill. ... Read more

Amazon.com Review

Instead of throwing away old, dull bits, give them a checkup with the Drill Doctor and extend their life. Although drill-bit sharpening systems often fail to live up to our expectations, we're here to bear witness for the truth of the Drill Doctor's claims: it really does sharpen old bits in just a couple of minutes. The 750SP (also known as the Professional) works on conventional, split-point, and masonry bits from 3/32 to 3/4 inches in size. If you don't plan on sharpening anything larger than 1/2-inch bits, we recommend getting the 500SP instead; it's basically the same machine, minus the cost of the 3/4-inch chuck that comes with this model. Both models--the 500SP and the Professional 750SP--allow you to choose between a 118- and 135-degree sharpening angle. Operation is fairly simple, but to make sure no one has trouble figuring it out, the Drill Doctor comes with a how-to video. Anyone who frequently wears down drill bits is going to appreciate the savings this handy machine can offer. Using sharp bits instead of dull ones also increases the life of your drill, because sharper bits require less work to make the same hole. We only wish we'd found the Drill Doctor sooner. --Brian Trinen ... Read more

Features

• Sharpens conventional point, split point, and masonry drill bit at 118- or 135-degree angles
• Two chucks accept 3/32- to 1/2-inch and 1/2- to 3/4-inch bit shafts
• Long-lasting Diamond wheel sharpens carbide, high-speed steel, standard, cobalt, and more
• Comes with how-to video

Reviews (33)

Drill Doctor DD750PK Precision Drill Bit Sharpene
There are many good things about this product. When I called tech support with a problem (chuck sticking), I got a human being with a knowledgable answer (loosen a few overtorqued screws) in a matter of minutes. On standard drill bits, it works very well.

However, I got it mostly to sharpen hex-base drill bits, as I use these drill bits with a quick-change chuck all the time. And I basically destroyed several bits (well, they were dull anyway) finding out that the chuck supplied with this unit simply can't get a proper grip on hex-base drill bits. They will be out of alignment, which means it won't work, at all. You just grind off random bits of your drill bit at random angles, resulting in a useless bit. Well, I _was_ able to sharpen a few of the bigger hex bits, but the 1/16", 1/8", and 3/16" bits were trashed.

So for my main use--sharpening hex-base bits--this fails pretty badly. If I'd known this, I wouldn't have gotten it. (Of course none of the marketing information or tech support information mentions this--if they did, they might lose some sales.) So I'll keep it, but quite disappointed. And no, tech support didn't have any suggestions for how to fix the problem.

So, if you want to sharpen small hex bits, give this a pass. If you don't use hex bits, it is a good deal. And the video they supply is excellent for teaching you how to use it.

Your mileage may vary.

The BEST Drill Sharpening System
Over the years I have collected hundreds of drill bits that served me well when new. But with each project I found myself looking for a sharp bit to complete the task. I needed a repeatable way to sharpen my drill bits. After extensive research and product reviews I purchased the Drill Doctor 750. It did EVERYTHING it promised. It sharpened both small and large bits, it removed all nicks and restored the cuting edge perfectly. The actual process is simple and quick. The video gives good instructions, but practice makes perfect, and I actually enjoyed sharpening all my old bits. I highly recommend the Drill Doctor. It delivers on its promise every time.

Pays for itself quickly
Glad I FINALLY bought one!
With the price of drill bits rising every day this baby will pay for itself quickly. Sharpens bit as good as or better than new. If you think you doing a good job sharpening bits on a bench grinder, you'll be suprised. Don't know how the hail I ever got along without one of these. Will never have to use a dull bit again. An absolute NECESSITY for anyone working with steel. I would suggest getting an extra wheel upon purchase because once you sharpen about 250 of your dead/dull bits after it arrives, you'll most likely need a new wheel.

The Good, the bad, and the great
I just received my Drill Doctor 750SPK and was surprised to find that it came with a carrying case which was listed by Amazon.com as an accessory. The first time I used the Drill Doctor it performed perfectly and I was inclined to sharpen even drills that I had previously considered sharp. For normal drill sharpening, I would rate it as 5-star. The only problem I had was with split tips. The drill holder does not slide smoothly in and out of the guide. It requires unnecessay force as far as I am concerned, however with extra effort I can sharpen split tips adequately. I will keep the unit since most of my sharpening is for standard tips. When and if I want to do many split tips, I will bore the guide out a little and and install a "pop-out" spring to move the tip back off the grinding wheel.

Incidently, one reviewer said that he received screwdriver tips instead of drills with his unit. I did not find that to be the case. I received the drills.

NO MORE DULL Excuses!!
This is product is everything good all have said about it. Order fulfill by Amazon - excellent! Unit well packed, handy carry case is superb.
Set up and use - I watched the video 1 & 1 1/2 times. Getting the drill set up properly is the whole equation - and is easy. I have sharpened both angle configurations, and split a few points just to see how easy it is to do. SNAP!
I didn't realize how bad a shape I was in until I cleaned up every bit I owned. I mostly work wood and don't demand a lot of twist drills here, but a few metal things came up and I realized I had a sour batch of drills. Problems solved. Everyone needs one of these....or maybe I keep it a secret and make a few $$ fixing up my neighbors tools. It would almost be like stealing. Maybe I'll do demo's and sell units. ... Read more

Features

• Features 3-Mode operation; "Rotation Only", "Hammer Only" or "Hammering with Rotation"
• Powerful 7.0 AMP motor yet weighs only 6.0lbs
• Impact Energy (2.0ft. Lbs.); Power-to-Weight Ratio (.32)
• Positive Lock ensures that the bit is securely fastened
• 0-1,100 RPM and 0-4,500 BPM (2.7 joules of impact energy) for demanding applications

Features

• Part of the DeWalt 18-volt system of tools
• 310 in./lbs. of torque for increased applications
• 0-500/0-1,500 rpm for increased user flexibility
• Variable speed and reversing for greater accuracy, control, and convenience
• Multi-grip trigger can be used in the least amount of space

Reviews (6)

Color yellow- lemon
This tool worked great for about three months, then while driving a#10 sheet metal screw the trigger froze in the on position, smoke started coming out of the battery pack, the only way to stop it was to disconnect the battery. I'm a cabinetmaker and this is one of the better right angle drills I've owned, it's a bit heavy and the forward and reverse switch is hard to use. The batteries last a long time, I can be on the job all day without charging them,nice.The keyless chuck is one of the best I've used, I hope this is just one of those lemons you get every now and again because I was really begining to like this tool.

Even better with a 1/2 chuck
Out of necessity and because it has ample power, I had been planning to convert this drill to a 1/2" chuck for some time, but just recently got around to it.
Since the DW960 comes with a 3/8" capacity chuck, I assumed that it would be mounted on a 3/8" X 24 TPI spindle as most 3/8" drills are.
Before buying a 1/2" chuck with a reduced 3/8" X 24 TPI mount, I decided to remove the original chuck and check the spindle to be sure.
With the chuck removed, I found that the DW960 has a 1/2" X 20 TPI spindle, which is the standard spindle size for mounting a 1/2" chuck.
I wouldn't bother changing out the chuck on my older model DW966 14.4V right angle drill because it doesn't really have enough power to make it worth the expense, but I decided to check the spindle size on it anyway. It too has the 1/2" X 20 TPI spindle.
Dewalt most likely does this to give the short spindles more strength, not to allow for an upgrade to a 1/2" chuck. Nevertheless, I really need this drill to be a 1/2", so I purchased a Jacobs made Dewalt OEM style keyless chuck from McMaster and installed it on the drill. It fit perfectly, actually better than the original did, and for my work needs, the extra chuck capacity makes all the difference.
I would never attempt to use this right angle drill as hard as my straight 1/2" cordless drill, but when working in a tight space, it's great to finally be able to use the DW960 with my Greenlee hole saws larger than 7/8", which have 7/16" shanks. This was the main reason for wanting to ditch the standard 3/8" chuck.
I've used it with hole saws up to 3-1/2" in 1X and 2-1/2" in 2X material. This seems to be completely within the drills ability without producing any unusual motor strain or heating. Understandably, I'm sure Dewalt would not approve of this modification and if the motor or gear train does eventually end up as toast, I'm okay with the fact that it will be my fault, not Dewalt's.
With that being said, it now appears that I can finally stop waiting for Dewalt to produce an 18V cordless 1/2" right angle drill.

DW960K-2 18V Right Angle Drill:
First the issues...

I bought this drill kit about two month's ago and so far it has performed very well on the job.
I was somewhat concerned to find that even with the fairly high price tag the drill and batteries are both being made completely in Mexico. From my experience, this usually results in a noticeable drop in quality. I suppose this is just a sign of the times and I should be getting used to it by now.
Also, after years of waiting for Dewalt to produce an 18V RAD unit, I still feel somewhat let down by the fact that it only has a 3/8" chuck capacity, especially since almost all of the trades really need a good 1/2" cordless RAD. The 18V RAD that Milwaukee makes is virtually useless and this Dewalt drill could probably spin a 1/2" chuck under most realistic workload conditions.
The two NAFTA batteries included are marked only as XR, not XR-Plus as all recent Dewalt 18V batteries manufactured in Japan are. I'm not sure if this means anything, but it did catch my attention.

And now the praise...

I have owned the almost identical DW966 14.4V version of this drill for several years and it has been worked hard but was always underpowered for heavier drilling tasks such as boring holes in 2X studs and joists or drilling into wall cavities from a basement or crawlspace below or an attic above, even when using spade/paddle type bits. Although the owners manual lists the maximum hole drilling capacities as the same for both the 14.4V and 18V, the new 18V DW960K has 100 inch-pounds more torque and several hundred more RPM's in high speed than the 14.4V model and is much more at ease with the type of heavier work described above. This drill will never replace your corded RAD for continuous heavy use on larger jobs but is great for smaller jobs where you need to drill several holes and don't want to waste time dragging out an extension cord and hunting for a distant electrical outlet. The added cordless advantages of mobility and safety are especially important when working in a damp crawl space or cramped attic area. The DW960 is only slightly larger and just a little heavier than the older 14.4V drill so it can still easily get into the tight places for drilling or driving screws but has lots more of what tradespersons need most, that being, torque and speed with the ability to interchange batteries with all your other DeWalt 18V tools. Overall it seems to be a well made tool and all is fine for now, but I can only wait and see if the NAFTA product durability will be equal to or better than my older Dewalt drill.

Customer Service
A previous review complained about DeWalt customer service phone number not answering.
I just called them at that number and they answered immediately. I got my support specialist and my problem is solved.
Try again.

lack of quality control
I recieved my new DW960k heavy duty cordless drill driver 20 Nov. 03. The next day, FRI. 21 Nov. I took it to work to try it.I put a newer fully charged battery in the tool, there was an imediate bright spark within the drill and it began smoking heavily. Once the fire went out I put a battery back in the drill and now it runs full blast without squezzing the trigger.
I have tryed to contact 1-800-4-dewalt but they aren't answering the phone. It appears that it is better to purchase your tools where they can be tested. I now own every 18 volt cordless tool that dewalt makes, several of some, and I wonder what I am going to have to go through to get this drill replaced, not repaired. I did not purchase a reconditioned tool. ... Read more

Features

• All-metal ratcheting chuck with carbide jaws for the highest grip torque on bits
• Milwaukee-built motor provides up to 495 in./lbs. of torque
• Up to 50% more run-time than competitive products
• Milwaukee's exclusive reversible battery allows users to adjust balance and get into tight spaces
• Limited Warranty

Reviews (6)

NOT Made in USA
Received the Milwaukee 0622-24 Kit today. Haven't used it yet. It MAY be a fine tool, but it is NOT made in USA. The drill is made in the Czech Republic, the batteries in Japan and the charger in China. Be forewarned that you are paying a lot for the name and if it is important to you to buy American-made products, this is NOT one! I'm very disappointed and will not buy Milwaukee again.

Best Cordless drill I've ever owned
I thought I had a good cordless drill until I purchased this Milwaukee 0622-24 1/2" drill. This is without a doubt, the most powerful,easy to handle,high torque cordless drill I have ever owned.Period. Everything about this drill is heavy duty including the chuck which is easy to use one handed.If you're looking for a cordless drill that can do it all, look no further,no manufacturer out there can compare with this Milwaukee and best of all, Made in the good ol USA. Five year warranty on this tool.The battery life is long lasting and recharges in only one hour.

I highly recommend this Milwaukee, you won't be disappointed with this titan. No one else come close in quality and features.

YOUR SEARCH IS OVER!!!!
I have owned a Makita, De Walt, Porter Cable, Bosch, and Panasonic 18 volt cordless drills. The Bosch was hard to part with but, I realized I made the right decision after I bought the Milwaukee. It is simply the lightest, most durable 18V drill I have ever used. The batteries last longer, the torque is better, the chuck is indestructable, and the "MADE IN THE USA" stamp pretty much sold me. I have dropped it, left it out in the cold, left it in the heat, and have built 12 decks with it. Only twice did I even have to use the other battery. Bosch comes very close. In my opinion, the others don't even compare.

Home Owner in Fort Erie, ON. Canada
For the last 2 years, I have been busy! I mean, REALLY busy, renovating our house. From decks, to fences - inside jobs / outside jobs. Bottom line: I have "wasted" a couple of drills in the process and wanted the best. NO DISAPPOINTMENTS HERE. Got a couple of more projects going, and this "piece" has performed better than expected. Aside form the Milwaukee name, this thing gives you a feeling of confidence that simply states "There is nothing too tough to handle". A nice feeling when you don't want to be interupted by a failing tool. Nice work, Milwaukee! I'm on my way to buy the 11 amp orbital Sawzall based on my experience with this "work of excellence"!

Heady duty is right
I bought this drill to replace my craftsman 18 volt drill that has taken a beating from woodworking projects to home improvement projects. I must say milwaukee lived up to its name for Heavy Duty. You can tell the first time you fire it up it was built to withstand the harshest abuse. I would reccommend this drill for anyone who can appreciate quality craftsmanship and rock solid performance every time. ... Read more

Features

• Includes 1 year limited warranty on parts and accessories
• 11.5 amps, 0-2,900 spm, 1-1/4" stroke
• Keyless clamp and shoe with variable speed trigger
• 180 degree joint adjustment and 360 degree blade rotation
• Includes case

Reviews (2)

Well Designed Tool
I bought this saw a year about a year ago. I needed to cut a 2" cast iron pipe that came up vertically through a 12 inch square concrete hole. The cut had to be in the bottom of the hole and be at a perfect 90 degree angle. Theoretically the same cut could have been made with a modified hacksaw, but it would have taken 50 blades and two days. With this saw it took two blades and 10 minutes. This was the only power tool that could perform this cut, which it did with some effort on my part The important part was that this cut eliminated the need to delay the project for three days to remove a hot water tank and a three foot square area of concrete in order to use a standard reciprocating saw or grinder. Since then I have found this saw to work great as both a standard reciprocating saw and as a special purpose saw.

Most of the time this saw is used like any other reciprocating saw - fully extended and straight. However, the one time that you need to cut something that is not in front of you and perfectly square to you, you will see where this tool shines. The head on this saw can be positioned in many angles and the blade literally spins 360 degrees. This adjustability does two things. First, it effectively makes the saw shorter, which was why it worked where no other could in my plumbing example. Second, the saw can be adjusted to literally fit the angle of the material that you are cutting, no matter where you are in relation to that material. Often, when you use a reciprocating saw in a remodel situation, you don't have the luxury of standing dead square in front of a level cutting surface.

This saw gives you more control by allowing the blade to be adjusted so it is square to the cutting surface when the operator cannot get into that same position. Since, the head on this saw that holds the blades can be positioned at almost any angle relative to the trigger handle, this means that you can get the saw's shoe, into a position that allows the shoe to rest on some part of the project; thus improving control AND safety. For example, with this saw, you can cut fit the saw head (not the whole saw) between 2x4 studs on 16" centers. This allows you to make more precise, square cuts in existing walls (say that have sheet rock on one side that you do not want to disturb) for modifications to the framing. Reciprocating saws have always been good for remodel work, but this saw is amazing. This saw has a system for loading blades that is quick and secure. The saw is smooth running and the variable speed control is .... well.... smooth. You can make cuts with this saw that, until now, were done with handsaws, drills, chisels, brute force and circular saws held in dangerous positons.

I have thought about writing this review since I bought this saw over a year ago and used it on my plumbing project. I have used it many times since and each time I think "I am going to write a review on this saw because people need to know that the extra money spent on this saw is well worth it for the added functionality." I used the saw AGAIN this weekend and I was AGAIN reminded how well designed and built this saw is. If you plan to use this saw for remodeling you will not be dissapointed.

BEST SAW EVER MADE , MOVE OVER MILWAKEE
I HAVE BEEN A CONTRACTOR AND HOME BUILDER FOR 30 YRS AND I HAVE ALWAYS BEEN A MILWAKEE SAWZALL FAN,BUT HAVE ALWAYS ADMIRED THE TIGER SAW FOR ITS SHEAR POWER.THEN CAME THE VARIABLE ANGLE TIGER SAW AND I HAD TO HAVE ONE. WELL THE GUY WHO DESIGNED THIS SAW IS ONE OF THE GREATEST MINDS IN TOOL DESIGN. THIS SAW CAN BE ARTICULATED INTO ANY POSITION YOU NEED. IT GOES WHERE NO OTHER SAW WILL GO AND ALLOWS YOU TO HOLD IT IN POSITIONS THAT MAKE IT EASIER AND MUCH LESS DANGEROUS TO THE OPERATOR AND THE POWER IS FANTASTIC, IT CAN'T BE STOPPED. THIS IS NO GIMIC, THIS IS A SAW IN A CLASS ALL BY ITSELF, THERE IS NO BETTER SAW OUT THERE.THIS SAW IS WORTH TWICE THE MONEY,DO YOURSELF A FAVOR AND SPEND THE EXTRA MONEY ,ITS WORTH EVERY PENNY AND YOU WILL NEVER BE SORRY. ... Read more

Features

• Includes (2) Ni-MH batteries, multi-voltage charger and case
• Two piece D-31 motor for easy serviceability
• All metal gear transmission for smooth, efficient power
• Shift lock drive instantly changes from drill to driver
• 2.6 Ah Ni-MH batteries for greater capacity and longer run time

Reviews (2)

Excellent drill!
I was recently forced into the market for a new drill when my old 14 volt Dewalt drill/driver finally ended its long career. I needed a drill that could be used for work every day and also came with batteries that would not run out of juice multiple times in one project. I have always believed in Dewalt, but with all the reviews in magazines (and friends) being negative on the new line of drills, I decided to do my research. I ended up choosing between Makita and the new Ridgid brands of drills. I bought a Ridgid drill from my local home center due to the fact that they did not carry the 18v Makita. After one day of use, I noticed a spark coming out the side of the drill due to the brushes in the engine. The drill performed very well even with the sparks but still had two additional flaws: battery life and weight. I went on Amazon as soon as I returned home to look into Makita drills. All of my saws and screw guns are Makita and I have never once had a problem. To my delight, Amazon not only had the drill on sale but it also came with a quality tool belt, work gloves, Amazon discount and a Makita rebate!
The bottom line is simply that this Makita is better made than the other drills. It has externally removable brushes that no other drill, at least that I know of offers. The drill is much lighter than others and the batteries can't be matched by anyone but Panasonic. This drill is just an amazing value, especially on Amazon. I would recommend this drill to anyone who is indecisive on what brand to buy for professional use.

Excellent Drill for the professional or DIY guy
This is one of the Best Drills I have ever used...HEAVY DUTY...WELL BALANCED...STONG MOTOR....AWSOME BATTERIES...and to top it off...AMAZON HAD THE BEST DEAL in town on this model.
For $174.99...I got the 18V Mforce Drill,Case,Charger,2 batteries, a $75.00 Tool Belt, $40.00 Work Gloves, a $20.00 coupon on my next Makita purchase.

WHAT A DEAL....I highly recommend this drill to any Professional or DIY GUY. ... Read more

Features

• 25-year limited warranty
• Most popular full-size Leatherman tool
• Larger knives, stronger pliers, longer wire cutters and all-locking blades
• Includes bottle/can opener, wire stripper, 8-inch ruler, and lanyard attachment
• 100% stainless steel

Features

• DC385 has 1-inch strole and 2,900 spm
• DC988 drill/driver/hammerdrill has 500 in.-lbs. of maximum torque
• Exclusive 3 - speed all metal transmission
• DC385 with keyless blade clamp for quick blade changes

Amazon.com Review

For years, Milwaukee's Sawzalls have been valued for their outstanding ability to cut through almost any material: wood, nail-embedded wood, steel, cast iron, aluminum, brass, drywall, composition materials, hard rubber, cement, brick, plaster, and fiberglass. This 11 amp Super Sawzall has a standard blade stroke mode, plus an orbital stroke mode for more aggressive, faster cutting of thick wood. You can choose the level of orbital action, too, to fit the application--or you can switch it off for cutting in metal. Like almost all reciprocating saws, this Super Sawzall also has variable-speed control (with a speed control dial) for versatility, control, and increased efficiency over a wide range of applications. For those of you who've grown up with Sawzalls, you'll appreciate the addition of the handy Quik-Lok blade clamp, which lets you change blades quickly without having to use a hex wrench; this feature is especially convenient when you're cutting hard materials, such as steel, a situation in which blades break frequently. There's also a handy quick lever adjustment for the shoe.

We really like this tool's counterbalancing mechanism, which reduces some of the unavoidable vibration found in reciprocating saws. The difference you feel when operating this tool, compared to nonbalanced saws, is significant: the Super Sawzall is still extremely powerful, yet it has a smooth feel. As a result, of course, you can work longer with less fatigue than you can using other, unbalanced saws. Another significant feature is the clutch, which, by absorbing shock and impacts to the internal mechanics caused by sudden blade lockups (typically encountered during extreme use), minimizes time wasted tending to a damaged saw. Although this is a heavy tool, it does have an ergonomically designed rubber grip that provides a solid, comfortable hold. --Tim Block ... Read more

Features

• Linear counterbalance reduces vibration
• Powerful 11-amp motor; 3,200 spm
• 1-1/4-inch blade stroke
• Steel Quik-Lok blade clamp system
• Orbital-action blade stroke for faster cutting through wood

Reviews (39)

The Best Sawzall Ever Made!
I had a Makita for 13 years that wasn't too bad, but it finally died of bad bearings. The repair cost was within $10 of replacement so I started shopping.

I was going to get the 10 amp Super Sawzall, but after reading toolpig's review and considering the advantages of orbital action, I bought this one. It was only $5 more. I will never be sorry!

My first project was cutting up a bunch of rebar to use spiking railroad ties down. Over 100 cuts (with a Lenox blade) and I wasn't tired and neither was the saw. I slowed it down with the speed dial to keep from burning up my blade. I never realized how handy this one feature would be until I used it. You can get precicion control over top speed without having to finesse the trigger. Just set the max and pull it wide open - no more overspeed burns!

Next I was cutting railroad ties with a 12" Lenox blade. I started out in the straight cutting mode and it was slow after the first inch. I switched to orbital action and the blade just about fell through the wood! I was making straight cuts and miters on 8" x 10" ties with no problem. I had used a chian saw in the past, but railroad ties always have a "suprise rock" right in the path of your cut. The recip blades are basically disposable, so you can save the chainsaw for less risky duty.

This saw runs smooth and quiet, no user fatigue after hours of use. The adjustable shoe is real handy, another feature new to me after the Makita. If this tool lasts as well as it runs, you'll never need another recip saw. I don't see how they could come out with a better tool, unless it would run itself on voice command while you sat back and watched! Maybe next Millenium.

Best Sawzall I ever purchased
Everyone knows that sawzalls can cut through almost any material: wood, nail-embedded wood, plaster, metal, (steel, cast iron, aluminum, black pipe, conduit, etc.) drywall, plaster,... you get the idea. When I used this to cut through floorboards and 2x4's it was as smooth as a hot knife through butter. Unistrut and allthread were also no match for this machine. This 11 amp Super Sawzall has a standard blade stroke mode, plus an orbital stroke mode for a faster, more agressive cut through thicker wood. You can also adjust the amount of orbital action from none to full depending on the application. This sawzall also has the new Quik-Lok blade clamp with allows you to change blades in seconds rather than minutes. There's no more searching for a hex wrench to change blades here.

I've been using sawzall's for quite a while now and I have always admired Milwaukee Sawzalls for their dependability and durability. When I finally had to replace my old one and discovered that Milwaukee had introduced a new sawzall to their line, it was a simple choice for me. The added power and easy of use make this an idea choice if your building something new, tearing something down, or fabricating something for a job. I would highly recomend this product to anyone who wanted to purchase a sawzall.

Might as well buy the Milwaukee--It IS the Best!
There are a lot of reciprocating saws on the market today; unfortunately some masquerade as a 'Sawzall', but Milwaukee invented the genre decades ago and, quite frankly, nothing is even in the same league as a genuine 'Sawzall'. DeWalt, Makita, Ryobi, Hitachi, Porter Cable all make reciprocating saws; some are professional grade, some say they are and some are just consumer models. When you decide either through using lesser tools or simply want to own the very best, Milwaukee stands head and shoulders above the competition in the reciprocating saw market.

Consider some of the features found on this model Milwaukee:

11 amps of power and it feels like more. This is one big, robust saw, period.

Detachable cord. Only Milwaukee figured out the ways people use a reciprocating saw--constant, demanding ROUGH use. These saws are most typically used in demolition work. In this environment you run the saw relentlessly and go through some blades. When you want to change one, in a hurry, nothing on earth is handier than being able to simply unclick the power cord and do a blade change. Believe me, you wouldn't want to change a blade on this beast without it being unplugged.

Orbital action. When you're rough cutting lumber, nothing assists you like an orbital action. This allows the blade to more aggressively cut through the material with less binding and less discomfort to the operator.

Anti-vibration. I don't know the technical nuances of how Milwaukee cancels out the vibration, but this saw is the smoothest (from an operator's standpoint) saw I've ever used. Any recip saw can truly rattle your fillings when it binds, but fortunately this Milwaukee has anti-vibration and a clutch, that genuinely minimizes feedback to the operator.

Easy blade change chuck. This has got to be the simplest blade change known to man. Rotate the collet about 1/4 turn and you're in business. NOTHING could be easier.

Variable speed dial. What a nice touch! Instead of relying solely on trigger pressure for speed control, Milwaukee thoughtfully provides a speed dial. Set it to half and you can pull the trigger back all the way and run at half speed. Demo work doesn't usually involve feathering the trigger, so this is a godsend.

Typical Milwaukee construction. Want to find out how good Milwaukee's reputation is in the building trades? Go to a jobsite. ANY jobsite. Residential, commercial, plumbing, electrical, it doesn't matter. First, stop by and ask any professional what they think of Milwaukee. Second, look for the RED tools (Milwaukee's trademark). Every jobsite has Milwaukee. The pros respect them because they don't break.

I brought this tool home on a Sunday and had to cut up 15 pallets to downsize them for garbage disposal. If you've EVER had the fun task of cutting up pallets, you can appreciate that the wood is FULL of nails (everywhere) and it's genuinely very hard, dense wood. Has to be to support the loads that pallets carry. I chucked in a new Milwaukee blade and 30 minutes later there was over 10 pounds (yes I weighed it!!) of sawdust and a BUNCH of small boards left. Saying the Milwaukee cut the boards like a hot knife through butter, in my mind, does a disservice to the hot knife! I ran the saw until it became so hot I couldn't hold it anymore, which is being overly severe to any tool; I just wanted to see if Milwaukee's vaunted reputation was as deserved as people say. It is. The saw NEVER stopped running; I honestly believe I could have put on gloves and kept going, but did allow the saw to cool down and resumed cutting. If a nail was hit, it bucked a little and just went on through it. It's a beast, plain and simple.

It's a very specific product, but one with a ton of uses. If you've never used a recip saw before, I would caution you to always make sure your item being cut is safely secured; a recip saw of this size has enough strength to easily move anything that is loosely held. Always be sure of what's under or behind the blade; if it's a concrete driveway or asphalt, you can damage the tool, but REALLY damage the driveway! Wear boots and safety goggles, this thing takes NO prisoners. And for heaven's sake, if you're demo'ing a wall, make absolutely certain that there are no live electrical wires present.

This saw isn't for everyone; it's pricey for single, consumer use. But, if you want the very best made reciprocating saw made, look no further than the Milwaukee Super Sawzall. It's the class leader by a BIG margin.

The best reciprocating saw period.
My wife bought me one of these as a birthday present this year. Can you believe that? It doesn't get much better in my book. The thing works great! I've cut wood, angle iron, rebar, nail embeded wood, flashing nailed to wood and all of it was a breeze to cut through. About the only thing I haven't tried - concrete... I'll have to see if I can find the right blade!

In the past I've used Dewalt, Makita and PC reciprocating saws extensively and most others on the market and none of them have performed like this. I think the best part of this saw is the lack of vibration while cutting, it far outperfroms the others. That said, there are also easy blade changes (watch out they're hot if you've just been using them) the detachable cord (love those things, got a couple of other Milwaukee tools with that and it couldn't be better), adjustable shoe, orbital action, and speed control dial. I can't think of anything else they should put on the saw except for maybe someplace to rest a 12 ounce can of something cold. I recommend this without reservation over every other saw on the market today.

A hot knife through butter is SLOW!
WOW!

I have used other reciprocating saws in the past but none has impressed me as much as the Super Sawzall.

I first used it to demolish a kitchen that I am remodeling. Wood, nails, formica and drain pipes never slowed the blade on the this Sawzall. I used a metal cutting blade for the drain pipes but everything else was cut with the blade that was recommended for nail embedded wood. Since then I have used the Sawzall for several other small projects around the house and it has performed flawlessly.

I did purchase the Milwaukee 11-piece blade set but haven't opened it as the two included blades are still sharp and still effortlessly slice through everything that gets in front of them.

Maybe this saw was overkill for my small home improvement projects but the ease of cutting and lack of kickback and vibration are worth the extra money. ... Read more

Features

• Titanium handles for lightweight and maximum strength
• All-locking blades for high-pressure reliability
• Sheepsfoot Blade with Cutting Hook for more efficient serrated cutting
• Premium belt sheath included for belt-side portability
• 154 CM premium stainless steel Clip-Point Knife

Features

• 1/2" ratcheting chuck with carbide jaws prevents bits from slipping
• Superior ergonomics provides optimal balance, comfort, and control
• DeWalt built high torque motor provides 500 in./lbs. of maximum torque
• Exclusive 3-speed transmission features a maximum 3rd speed at 2,000 rpm
• Hammerdrill mode: 34,000 bpm drills faster holes in masonry applications