Features

• One-year warranty through the Dewalt factory or an authorized service center
• Controlled Finishing System maintains controllable pad speed and minimizes gouging
• Dual plane counter balance fan
• Dust sealed switch for increased durability
• Electronic variable speed

Reviews (1)

Dust? What dust?
When I first received the DeWalt sander I used the attached dust collector, but found I was spending a lot of time emptying it. I then connected the sander to my shopvac and wow! There was literally no dust left upon my project, even when I used a tack rag! ... Read more

Features

• Recharge at home or from a vehicle
• 1500 watts of household AC power
• Runs 115-volt AC or 12-volt DC products anywhere
• Provides emergency power when the power goes out
• Requires no maintainence and safe for indoor use

Reviews (7)

Badly damaged once again.
I previously ordered two of these units and wrote a review. Both were badly damaged, but one was salvagable. The other I had to return, after it overheated and emitted a noxious odor. I decided to take a chance and order another unit this month (goal was to have total of two working units), hoping that whatever warehouse or shipping issues that resulted in previous damage had been resolved. They weren't. This unit also came with crushed top and wheels. Until the manufacturer comes up with a better way to ship these heavy beasts, not worth it.

Good all-in-one package
The Xpower 1500 is a good backup system as it has eveything you need in a convenient handtruck (the batteries are heavy).
Unfortunately the 61 Amphr batteries don't last that long. Adding a 100Ahr battery which you can easily be connected to the xPower make for a nice system which will get you thru a few days of blackout.

I HAVE TWO OF THESE
I HAVE TWO XPOWER 1500 UNITS . THEY WORK AS ADVERTISED, EACH UNIT WILL RUN A REFRIGERATOR FOR OVER TWO HOURS DURING A POWER OUTAGE. THEY WILL START A SKILLSAW WHEN FULLY CHARGED.
THE ONLY PROBLEM I HAVE HAD, ONE OF THE CHARGERS WILL NOT CUT OFF AUTOMATICALLY WHEN THE BATTERY IS FULLY CHARGED.
A QUALITY PRODUCT, BUT NEEDS TO HAVE MORE RESERVE (BATTERY AMPS) FOR LONGER SERVICE. GREAT IDEA.

doesn't run
bought one for the boat, didn't run, wouldn't charge. Fluke?
exchanged for a new one. Followed directions still no charge after 24hours plugged into household power.
Not worth time or effort it would appear.

Living Off The Power Grid - The True Test
Our ranch is outside of utility power service, and we rely upon a generator for our power. The Xantrex xPower 1500 was appealing to us for the purpose of running small electrical units, TV, VCR, lamp, computer, without having to start up and listen to a 10K generator. An added advantage is being able to take power where you need it on our acerage. The portable dolly design allows the power unit to go where you want the power, for power tools, weedeaters, etc.

The system works wonderfully for our purpose. Now we can enjoy a few quiet evening hours without having to forego light and entertainment. Plugged into a standard wall outlet, the x1500 battery easily charges up during the generator-run hours. We are very pleased.

We experienced one glitch, which turned out okay. The original unit we received had battery acid spilled inside of the box. Xantrex technical support was very clear that this was not right, and the unit could not be used and needed to be replaced. Their warranty department took care of everything, and delivered an entire new system within two weeks. It did take more than one call to get a solid answer on this solution, but it worked out satisfactorily. ... Read more

Features

• Thin kerf (.099) for fast and smooth cutting action
• Exclusive wedge shoulder design puts more steel behind each tip
• Computer balanced plate reduces vibration for better finish
• Includes 12" 80T and 12" 32T ATB carbide blades with 1" arbor

Reviews (2)

combo blade pack
This is a great deal! The money I saved buying these blades allowed me to buy other accessories for my saw. Not to mention the fact that after using the 32 tooth blade for cutting the framing I can switch over and use the 80 tooth blade for the molding. The thin kerf of these blades allows for accurate cuts.

Saw Blade Combo Pack
This is a great deal, for any one with a 12" mitre saw.. ...I got 2 saw blades a 30 tooth, and an 80 tooth,one for finish work and one for rough every day cuts , ... my saw came with a 60 tooth blade ,, now I have 3 blades that will allow me to cut anything I need...GREAT DEAL, I actually got 1 blade free, ... ... Read more

Features

• User can engage contact trip lock-off and prevent accidental dis-charge of fastener.
• Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician.
• Works as fast as you do with consistent nail penetration into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints.

Features

• Variable speed control / reversible
• 18- stage clutch plus drill position
• Compact, Light Weight, Ergonomic Design
• 2 - 1.2Ah Ni-Cd battery packs
• 30 minute quick charging system

Amazon.com

A drill/driver is a great tool, but not for every application, unless of course you consider stripped screws part of the charm of doing it yourself. Some jobs simply need the added muscle only an impact driver can provide, and the 14.4-volt cordless DeWalt DW054K-2 is one impact driver worth a look. At first glance, the DeWalt driver looks a little weak. After all, it measures only 6-1/2 inches and weighs just 4.1 pounds. But don't let appearances fool you. Under that slight exterior beats the heart of a champ. The driver produces an amazing 1,150 in./lbs. of maximum torque, making it ideal for even the toughest jobs and the tightest applications, where comparable drivers simply couldn't reach. The unit features an all-metal transmission, a durable magnesium gear case and an all-metal quick release chuck that accepts 1/4-inch hex shank bits. A textured, anti-slip comfort grip provides ultimate comfort and stability. A specially designed impacting mechanism reduces kickback -- and fatigue. And a variable-speed trigger switch with electric brake means better overall control.--Carl Thress ... Read more

Features

• Includes impact driver, two 14.4-volt XR batteries, charger and kit box
• 1,150 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas
• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 1/4-inch hex shank drive with quick release

Reviews (4)

DeWalt's DW054 14.4v Impact Driver
I have used a few impact drivers in my day. Just recently I purchased the new 14.4v Impact for work. I am very impressed with it power and vesatility. I just hope I can stop myself from using it all the time.

Sudden Impact
This summer I decided to build three decks and install a three-rail fence around my property. These projects require a lot of fastening with 3 inch deck screws. I used my drill/driver for my first deck and my wrists were hurting from the torquing action. I received my impact driver and put it to use immediately. The Dewalt impact driver drives these screws quickly and effortlessly and I've tossed my drill/driver aside. I would highly recommend this tool to anyone using a drill to drive-in screws, lag bolts, etc.

great new technology- what took them so long
i am a 53 year old carpenter-builder who has carried my 18 volt dewalt for several years on my toolbelt (heavy). The batteries are going, my shoulder is going, and i can't get into tight places. The Dewalt impact took care of all the above problems. I took a chance (because there were no real reviews) and bought it -and I love it - you will not believe how small it is!!! Here is some real data - the first day on the job site we were trying it out and we drove ONE (the same one) 3 inch galvanized screw (the kind that strip easy) in and out 6 times without stripping the head (we stopped testing with no sign of stripping but the screw was really hot )- the amazing thing is that the impact is just as helpful backing the screw out.
Hex ended drills are readily available and were tested in wood and 3/8 steel - no problem. (i have only found smaller -1/4'' -high speed bits readily available) The dewalt hex ended spade bit (3/4'') cruised through wood with much less effort than my 18 volt. My only question is how durable it is. Time will tell - but beyond that I am happy as hell with it.

DeWalt Cordless Impact Driver
Okay DeWalt has created another must have tool. It is compact and has the torque for the big driving jobs that would require frequent battery changes or a finish up with a hand wrench. Now be ready and hang on as this will drive 99% or our needs for heavy torque jobs. See model DW055K-2 for the 1/2" driver output. ... Read more

Features

• Hammer-Drill provides up to 495 in.-lbs. of torque and features an all-metal ratcheting chuck with carbide jaws for the highest grip torque on bits
• Hatchet with 6 position pivoting handle and an orbital action selector for aggressive wood cutting or straight reciprocating action for metal and plastics
• Circular saw cuts up to 145 2x4's on one charge for optimal productivity
• Reversible battery for adjusting balance and for getting into tight spaces

Features

• Includes two 1.2 Ah Batteries, 1-Hour Charger, No.2 Phillips 2" Driver Bit, Flashlight, 6pc. driver bit set and Plastic Case 22-stage slip-clutch for precision driving
• Flashlight included for illuminating the work
• Lightweight at only 5.3 pounds for easy drilling
• Heavy-duty high torque motor for optimal power
• Electronic feedback power control for high torque at lower rpm's

Reviews (3)

To Reviewer Below
In addition to not being able to read, I believe he maybe blind.There are no "blue tabs" on the photo.There is nothing but black and green.

Can you not read?
To the other reviewer, can't you read that it says "Includes two 1.2 Ah Batteries".Don't give the product a bad review b/c you can't read the specs.

BEWARE, not as pictured or advertised...
This is the DS18DVB drill. However the refurbished kit came with the EB1812 batteries, which are only 1.2Ah and the charger that came with it will only charge them, not the other 18v batteries Hitachi sells. The picture Amazon has with this item clearly shows the 2.0Ah batteries (you can tell by the blue tabs, the 3.0Ah are yellow and the 1.2Ah are all black) While it is a good drill and flashlight, I bought this kit at this price primarily to get a couple more batteries and a back-up charger. You are better off getting the kit new with the better batteries. Better still, get the kit that comes with the 3.0Ah batteries, a reciprocal saw and a circular saw. I will probably be making Amazon take this back. ... Read more

Features

• Maximum 120V power switch ensures peak performance of 120V and 240V tools
• Honda 11 HP, OHV GX engine for worksite reliability
• Electric start (recoil backup) with non removable switch
• Maintainence free, brushless alternator for increased durability
• High amp surge capacity for starting high amp tools

Features

• Accuracy guaranteed for life
• Accuracy certified, top and bottom readings
• Strong, wide frame design
• Removable rubber end caps for flush measuring
• Oversized rubber hand holds for comfort

Amazon.com Review

Out of the box, this little ladder doesn't look like it's going anywhere. But start telescoping it and you almost can't believe your eyes. It extends to 12-1/2 feet from its closed height of 2-1/2 feet; plus, you can use the ladder in any of its 1-foot increments. Stainless-steel spring-loaded bolts inside the rungs lock into place as you extend the ladder. The rungs are made of processed aluminum, and serrated treads feel strong and secure under your feet. When you're done, you just tug on the locking rings, collapse the rungs down, and walk away with a 2-1/2-foot, 23-pound ladder under one arm. It takes virtually no space to store--put it under a bed, in a closet, in a car trunk--and totes anywhere. Clever as can be. --Kris Jensen-Van Heste ... Read more

Features

• Extends in 1-foot increments for versatility
• Compact for ease of use and storage
• Aluminum construction is tough but lightweight
• Easily transportable
• Serrated treads for non-slip grip

Reviews (9)

Very handy ladder
We use this for satellite dish installation, and we are very pleased with its quality and durability. First we used the 10.5" version. However, we find the 12.5" version more useful. We highly recommend it to all of our dish installers. This is a light weight and easy to store ladder. No need to haul around long big ladders anymore. This will do for 90% of the jobs. Best regards Sadoun Satellite Sales

Quality ladder in every way--But FOLLOW the instructions!
Like one of the reviews posted previously, I use the TeleSteps ladder for inspection. In that regard, it really has no equal; when it's all knocked down it is the smallest possible package in a quality ladder. When set up, it's a genuinely good 12 and 1/2 foot ladder. It's very light, sturdy and both well-thought out and made with a high degree of manufacturing quality.

Having said that, I will mirror what other reviewer state: If you don't read AND FOLLOW the instructions, you can/will find yourself in a bad place in a hurry. You must always start unstowing the ladder FROM the bottom, not the top (yes, they say you can start at the top if you're deploying it to the maximum extension. But I'd err on the side of conservative with this ladder). And at each rung, as you're raising it, two little detents pop into place. You must make ABSOLUTELY CERTAIN that these two little detents are LOCKED. Honestly, it might add up to a total of one whopping minute to make certain this is done, so in my opinion it's totally worth the time to ascertain that they have done so. If you do this, this is one nice ladder. If you get in a hurry, you may be in for a surprise. After reading the one reviewer that took a spill, I've gotten into the habit of double checking every detent, just to be sure.
If I had any suggestion for the Swedish manufacturer, it would be to somehow make the detents a bright safety red or something that would be visible, only when they're safely locked, so a user could easily see that the detents are adequately locked.
It's genuinely as 'high tech' a ladder as you can get and an godsend for inspection purposes. I can easily put it in the trunk of any car and the ability to selectively determine height is a handy feature. Highly recommended, extremely well made, but more than most products, one that absolutely requires you to read and follow the instructions.

Dreams do come true
A a building inspector I enter beautiful homes on a daily basis. This compact ladder permits me to take a clean ladder into the home for access to attic spaces and other areas. Stored inside my work vehicle there is no dirt to apologize for. Also I save time. I no longer have to tie a long cumbersome ladder to the roof of my vehicle. Compact, fast, lightweight and clean. The Telesteps telescoping ladder is all of these. Plus, it is one of the highest quality tools that I own. My only wish is that it was available in 16 foot length.

USE WITH CAUTION
This is a great tool for limited applications. 1st - I wouldn't put more than about 200 lbs on it. 2nd - it is fine to get yourself onto a roof or into an attic, but it is not solid enough to work from. 3rd - you must follow the instructions in opening it, especially being sure that every section locks in place, or it will collapse under you (I've heard several stories of this happening). 4th - keep it well lubricated with silicone spray (I carry a silicone spray can with the ladder at all times). I have used it satisfactorily for about three years. If you recognize its limits and are willing to work within them, the ladder is very useful. If you expect more from it, you will be disappointed and could get hurt.

Amazing
The best part of this ladder is how easy it is to get into tight spots. The second great thing is how peaple react to seeing me set it up. I would note that my model 106 10.5 foot ladder is most stable with a weight no greater than 180lb when fully extended. ... Read more

Amazon.com

Since it tips the scales at just 66 pounds, it’s incredible that this little unit can output 2,800 watts. Not only that, but it’s a good deal quieter than other generators in its class. The inverter system with Pulse Width Modulation delivers such a stable voltage that you can run products with built-in microcomputers or microcomputer-controlled electric tools off this generator. A nice innovation is the "Economy Control" electrical governor: It matches engine speed to the electrical demand, so if you’re camping and just running a CD player, the engine downshifts to supply that much power, again reducing noise to about 60 decibels. Plug in something else, and power increases accordingly. Another nice feature is the Oil Watch warning system that shuts the unit down before the oil is low, and won't let you restart until oil is added. Because it’s light, compact, and quieter, this is the ideal generator to keep on hand at home for power outages and a smart buy for the job site, too.--Kris Jensen-Van Heste ... Read more

Features

• Provides highly stable electrical frequency--perfect for microcomputers or sophisticated electronics
• Inverter Technology with pulse width modulation control
• Automatically adjusts engine speed to match power demand
• Oil Watch warning system: shuts unit down before the oil is low
• Extremely lightweight (only 66 pounds)

Reviews (3)

The generator specs and looks are fine, but....
No where in Amazon's presentation of this item is the fact that you will need an "isolation switch," also called a "transfer switch" at some stores. This is a [$$] item that allows you to switch off the electric power line from your utility company while you are using the generator to feed power to your home. This protects utility workers from electrocution that could occur if you backfeed electricity into the power grid. It protects your home circuits and appliances from overload when the utility power comes back on. Neither Amazon nor Yamaha mentions the fact that the Yamaha generator requires a particular locking plug for the AC output, and does not provide the NEMA number that you have to match when buying the power cord taking power out of the Yamaha to your home's electrical supply input. Yamaha's manual is ridiculously inadequate about how to set up this device, though the details for maintenance and safety seem pretty thorough. But you have to be able to use it, and using it requires a frustrating process just to know what parts to buy. And then there's the cost of an electrician to install the isolation switch. No plug-'n-play here.

A lightweight, heavyweight!
When I opened the box and saw this little generator, I thought I was in trouble. But this 2800 watt Yamaha is the new inverter model. Not sure what that means, but it is very light weight but really puts out the juice. We ran 2 screwguns, 2 - 500 watt quartz lights and our radio and this Yamaha barely ran above idle. It weighs half of what our old junker weighs, runs 4 to 5 times longer on a gallon of gas and purrs quiet as a kitten. We have been using this wonderful generator for over a year with no problems at all. It's Yamaha inverter generators for our crews from now on.

Durable, Efficient, and Economical Power Generator!
When I started construction on a cabin in the woods of northern New hampshire, I wanted to be sure I had a reliable alternative source of eleectrical power both for the construction effort and for time later when the basic power would be unavailable, as in an ice storm or other power outage. I was pleased to find this state of the art model from Yamaha because it had both an enthralling list of desireable features and was within the budgetary figure I had in mind for the generator.

That said, I have been thrilled with just how powerful, durable, reliable and economical it has been both to own and to use. Yamaha truly has created a super quiet, small, and light generator, the best of its kind. it is a 2800 watt generator that emplys inverter technology. It's well suited for equipment requiring a stable frequency and voltage. Voltage output stability very "clean", so it can power microcomputers or sophisticated electronics, a feature we appreciate as we can use it evenings to power a laptop. When power demand power is low, the generator runs at a low engine speed, then, as power demand increases, engine speed increases in a corresponding power curve. This Yahama inverter system meets my needs superbly, and I can highly recommend it. Enjoy! ... Read more

Features

• Set includes metal index storage case
• Cobalt coated titanium, high speed tempered bits cut faster and smoother
• More durable than M2 high speed bits
• High speed 3/8-inch reduced shank for use in almost any drill
• 135-degree point for faster starts and less walking

Reviews (6)

I think the engineer is waving his flag to hard
I have this set from Amazon and It is an great set at a fair price. I noticed the engineer rated it poorly. I could have guesed that. He probally wants to buy a USA made set for the 69.00 dollars. Truth is that the days of cheap american goods were gone in the 50's. All this stuff now comes from overseas. Why because we wouldnt pay for expensive American Goods anymore. The Amazon quality is as good as anything for the price on the market. I did a little research on drill bits before bought this set and did you know that all of inexpensive drills set now come from off shore. Craftsman, Grizzly, Ryobi, Northern, Harbor, Woodstock, all of them. Where elese can you get 115 drill bits for that price?

Absolute C**P
I am a professional contractor & electrical engineer with more than 30 years experience. Usually, I buy American made tools and accessories ONLY. Thought I'd take a chance on these. BIG MISTAKE.

Drills arrived in POOR PACKAGING. Several had fallen out of CHEAP METAL BOX. The drills were BARELY SHARPENED & OFF-CENTER.
The drills are multi-colored - obviously from overheating in cheap oil to make them "LOOK" special.

There is no independent confirmation these are cobalt alloy. In fact, I used three of them just to drill slowly into dry oak base molding. BROKE THREE DRILLS INSIDE OAK!!! WTF!!! I will never buy tools again from the Tool Crib, or from Amazon. Stick with USA made such as Norseman, Tru-Cut or Triumph Twist. Sure, you pay two to three times more, but you'll never break one unless you use it for a chisel.

This is what happens when one try to savea few $$$ and buys product made by forced CHINESE PRISON LABOR.

Not worth $60
I had my set for couple weeks now and I have already broken a bit. The material is very brital. While drilling steel the bit broken in half. I also discover that the tip surface is not exactly even/symmetrical which results in your work piece wobbling on initial contact. Once the bit digs into the work piece the wobbling stops. I compare this wobbling affect with a USA made bit and there were zero wobble with the USA bit. These bits are sharp and will go through steel like butter. Overall I am not happy with the purchase. I would return it if I hadn't broken a bit. It was a waste of $60.

Great bit set for the $$$
Mine came liberally oiled but not excessively so. Bits seem to perform well, case is not a mega-$$$ item, but overall, is pretty nice with sizes nicely legible. Very good value, IMHO....

great tool buy from amazon.com
Amazon.com often doesn't have the lowest prices on tools. But shop around for a set of cobalt bits like I did, and you'll find that this set from amazon.com is the best price around.

These bits go through aluminum like butter, and are definitely up to the job for steel. I haven't had them long enough to comment on their durability, but so far I prefer them to a set of TiN-coated bits I've got.

4 stars because some of the bits seem a bit out of true when chucked. UPDATED: Some of them really are not straight, I verified this by rolling them on a granite surface plate.

If you're doing a lot of work with metal, do yourself a favor and get a set of these. Highly recommended. ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 6.2 amp motor
• Helical-cut steel, heat-treated gears for smooth operation
• High torque for deck building and drywall

Reviews (1)

Good Product
Nicely balanced, plenty of power, and comfortable and a great price. If you are doing strictly drywall you may prefer the DW251R (0-4000 rpms) vrs the DW257R (0-2500 rpms). ... Read more

Features

• Flashlight included
• High performance motor
• 3/8" Key-less chuck
• 22 position clutch
• 2 speed transmission

Features

• Includes impact driver, two 12V XR batteries, charger, and kit box
• 1000 in./lbs. of maximum torque for wide range of fastening applications
• Compact size and weight allows access into tighter areas
• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 1/4" hex shank drive with quick release

Reviews (7)

Best tool in 2 decades!
Being a door installer, I ordered this tool as soon as it came out. Awesome! Drives hinge screws in with no problem. Drills up to 1/4" bits without impacting. Where was this tool 5 years ago? My 18v drills are semi-retired, who needs a corded drill now. An earlier reviewer said he had problems finding hex drill bits. Most home improvement stores carry them in sets and you can sharpen them accurately with a Drill Doctor sharpening system when they dull. But as always we want more speed, can't get enough. I'm sure that with 2 brands out now that are faster, Dewalt will step up to the plate and deliver the knockout punch, til the next round at least. You can't go wrong with this one. Get one today.....

Amazing !
Being a DeWalt tool owner I decided (for charging reasons) to stick with them.This tool is awsome!I tried driving a screw right through a 2x4 didn't slow it down !Any one doing electrical work with greenlee knockout punches(slug busters)get the 1/2 socket adapter for the inpact driver put a 1" socket on it and make some holes on electrical boxes !It goes so fast I don't dread using the slugbusters anymore. It is getting so I rarely use my 18v drill except to drill,not to drive screws anymore !

One wasn't enough!!
In my company we do alot of weatherstripping installs and we remove AC vents and replace them after working on the ducting. I am obsessed with tools if it is out there I have to have it. Usually I will have it within a week of its release, most of my tools are Dewalt, but honestly they do not make all tools up to par. In this case I do not have a problem with buying a different brand to get the best for the job. This being said I bought the first impact that hit the home improvement store in my area charged it up on the way to the jobsite so I could try it out. I was impressed right away so I let others on my crew use it to see what they thought roughly twenty people had tried it by the end of the day on the charge of the two batteries. On seeing these results I decided that this was the tool of choice for our business and went to buy a few more. Upon arriving at the home center they were out so I had to order them. After talking to the crew several said they would like to have an impact themselves. So I went and ordered twelve more impacts and none of the crew have been disappointed with the tool. A month went by are our crew had increased in size as did the amount of work and so I went and ordered fourteen more impacts.

Almost a complete drill replacement
As a proffesional contractor who relies on my tools to feed my family I have to say this tool is a winner. I was introduced to it by a finish carpenter who had been using one he got as a gift. It has almost replaced my regular heavy 18v drill. the hex bits work great, but beware of breaking them easily. Also the hex drill bits can not be resharpened easily. Between this tool and the Dewalt 7.2v screwdriver, I have gone from using my big 18v drill daily to less than weekly. I love this tool for setting and removing tapcon screws in concrete!!! nothing is better!! I also discovered that by placing a soft brass rotarly brush in it, it is a wonderful tool to cleen off wood, concrete, and sidding. I used to have my assistant clean the concrete splatters off of sidding until I discovered this. Now instead of taking the better part of a hour to clean a porch, it is done in less than 10 minutes and usually less than 5. Time is money and this tool saves time in a big way. The only major downside is the cost of hex accesories and the quality of them. You will definitely get what you pay for in them, so don't scrimp and buy the cheapies. Especially screwdriver bits, they break too easy and you'll just end up going through them faster. I highly recomend using square drive screws with this tool.

Awsome!!!
I have just received mine and it's better than I expected. I initially wanted to buy a Makita, but after countless hours of research, and comparing both specifications, the Dewalt has the Makita beat. More power, faster, lighter, smaller, and in my opinion, much better looking. Also cheaper. ...This is by far my favorite tool. I just wish that I could find drill bits that have 1/4 in. shank. ... Read more

Features

• Aggressive toe nail nose
• Selective trigger
• 3 1/4" clipped head nailer
• 3 nails per second
• 7.9 lbs

Features

• Two year limited warranty
• Total freedom of movement
• Bags are built of two layers of DuPont Cordura
• Top grain leather tool holders and suspension strapping
• Handcrafted in the USA

Reviews (10)

Everybody Is Different
I thought I would like this tool system. I have all the same complaints about my old tool belt as everyone else. Hurts the lower back, makes bending difficult, etc.... This suspender system seemed like a good idea, and it is. Just not for me. I tried it around the house for a few hours and noticed that when I reached over my head, the stiff shoulder pads pushed on the sides of my neck, though these may get softer with wear. And that my shoulder muscles had to lift the entire weight of the bags when reaching upwards.
Also, these bags are BIG and WIDE! You will have to be careful if you are a remodel carpenter, walking through finished doorways and hallways.
Still, this rig is very well made and if you need to carry lots of heavy tools and want to give your lower back and your waist a rest, this may work for you. It's a trade off.

Take Carefull Consideration!!
I purchased this belt set last January and I was impressed with how it relieved the stress on my lower back. I was also relieved of waist rot from conventional tool belts. The suspenders were easy to set up with the instructions included. Break in takes about a full week. Pouches do hold lots of tools.
As hotter weather came along, the suspenders hold a lot of sweat (later they began to smell). But I also noticed it was very uncomfortable when the suspenders wouldn't allow for your upper body to cool off. My shoulders also began to chaf.
As for movement, the system doesn't cling to you. But working in very close quarters, (i.e. lifts, steel joists, some scaffolding,etc.) it was easy to get hung up and scrape against walls.
I am considering selling my suspension belt, but pondering the fact that its not a bad set to own if you switch between this system and the belt a few times a year. That way I wouldn't wear out body parts to quickly.

The Best Available
I owned the pro framer for years; then sold it to a helper for $... and he was happy. I bought the Pro Trimmer but was disapointed because the speed square holster (between the small and large bag) was not available on a rig of this size. After awhile I forked over the big bucks for the Stronghold System-the best there is. Oh I've read the reviews:adjustment-if you can't adjust this system you probably shouldn't be doing carpentry;the yoke; heavy duty, extreme quality products take time to break in-like good leather work boots or the Carhartts that last longer than anything else; the back strain relief; a no brainer-buy a weight belt and wear it along with the system-there is no belt to interfere; lastly, if you wear a framing belt in a finished house or around cabinets your going to mess something up-don't do it-I build cabinets and built-ins and do general carpentry for a living. The only criticism I have(the part about the missing star)is that this product should be available with the lightweight, green leather bags. After 1 year the nylon shows signs of extreme wear at the front corners. If Occidental Leather would do this for us I would be one of the first to buy them even for $... . I will wear this for as long as I work! The writing is on the wall; perfect this product and it will be a five star masterpiece second to none.

I Love it!
I have the Stronghold system in leather, which [is no longer listed]... I think it is first rate in functionality and comfort, and wouldn't return to a belt. I think you have to analyze your needs and body type carefully: this system isn't always going to work better, for instance reaching up can be tiring, though that is true of suspender. If you have the kind of body that rides a belt, without suspenders, and it never shifts, binds, or restricts your breath, good for you, stay with the belt. It takes, however, only a few inches on the waist, whether from brownies or winter clothes for me to be hauling on a belt all day long.

Another issue to look at is back pain. This system puts all the strain on your shoulders, were it flows down through your spine, and you don't have a big belt supporting the small of your back. That works out better with my back pain, but it may not for yours.

I am 6'1", and I have no problem fitting this strap set. I like my knuckles to drag in the bottom of the deepest nail bag, which is a higher setting than many prefer. The bags by themselves are unique, and would fit nicely on a safety harness if the inspector prowls your worksite.

Beltless tool bag review
Whats good:

1. The bag is made of very durable materials and should stand up to many years of jobs site use. 2. There are plenty of pockets to hold small items such as tape, pencil, knife, screw drivers, etc. at very convenient reach. 3. Slips on and off in seconds. 4. Allows the user to bend at different angles with out being confined by a belt around the waist. 5. Pouches are less likely to spill contents when working at different bent over positions. 6. Two large pockets to hold larger sized tools.

Whats not so good:

1. The system is difficult to adjust for use the first time out of the box. (Set up is done only once so this is a minor pain only) 2. The shoulder pads, although very comfortable, will get dreanched with sweat if you work in the heat. (I need to think of something for the odor?) 3. The system does not remove weight from your lower back as I had thought it might. You can carry a ton of tools with this system, but you will feel it by the end of the day.

I install siding, windows and do general carpentry. This bag gives me flexiblity and capacity that I didn't get with my old belt. I like the system and would recommend it to people that feel confined by belts or that are looking for a good capacity well organized system.

Hope this is helpful ... Read more

Features

• 15-amp motor for maximum power
• Feed rate adjusts under load for optimum planning
• 12-by-6-inch capacity to tackle large planning tasks
• Adjustable, folding extension tables for easy storage

Features

• Built-in power vent for horizontal or vertical venting
• Endless hot water
• Delivers up to 6.4 gallons per minute
• Supplies hot water for 2 applications
• Direct vent room-sealed combustion