Features

• The overlap gauge can be removed without damage to the siding.
• Combines two popular tools for fiber cement siding
• Comes with one facing gauge and one overlap gauge
• Make installing fiber cement siding a one person job
• Facing gauge can be adjusted without the use of tools

Reviews (3)

Great system
This system works great and makes it POSSIBLE to hang siding with only one person working. It works fine as is for ground level work or working from a scafold. I am buying a second set for ladder work so both ends can be supported while go down for my nailer. Well worth the money.

This is the ticket for hardi-plank installation
True..the picture is misleading, there is only one of the hangers in the package, and there are times when 2 would be helpful.
Overall these tools exceeded my expectations, I'm finishing up on a 500 piece installation and I've hung every piece single handed with these tools.

The picture will deceive.
I have not used this set yet so I don't know how well it is going to work. Appears it will work pretty well.

Be aware that it comes with the facing guage and only ONE of the overlap gauges, not two as the picture would imply. ... Read more

Amazon.com Review

This comprehensive power bit set is an ideal complement to any cordless drill/driver. The quick-change chuck and vast array of driver bits are especially handy for cabinetmakers who encounter a wide range of fasteners and often need to make several bit changes in a short amount of time. The carrying case is tough and has a labeled spot for each bit, so you can always find the right one quickly. The bits are made from heat-treated alloy steel, and they resist deforming and stripping as well as most bits on the market. The set also includes five high-carbon-steel pilot-point drill bits, with shanks designed for use with the quick-change chuck. For 2-inch bits the set includes: six standard and six metric nut-driver bits, eight Torx bits, eight hex bits, four Phillips bits, four slotted bits, and three square-drive bits. For bit tips you get 10 no. 2 Phillips bits, 4 slotted bits of various sizes, 6 Torx bits ranging in size from T-10 to T-30, 3 Pozi bits, 3 Phillips bits--nos. 0, 1, and 3--8 hex bits, 2 clutch bits, and a 1/4-inch socket-drive adapter. Also included are a countersink bit, two handy screw-finder bits, and the quick-change chuck. This is the biggest and most comprehensive driver bit set in our store, and when you consider the included quick-change chuck, there's just no better deal for the money. --Brian Trinen ... Read more

Features

• Lifetime warranty
• Features E-Z Chuck
• Heat-treated alloy steel bits
• High speed, high carbon steel pilot drill bits
• Comes with carrying case

Reviews (3)

Good value for the $
It is hard to beat the value you get in this set. It contains most of the bits you would need and want. I thought it was odd however that while it contains both metric and english sockets it only has english hex keys. If your a bicyclist like me you know how important metric Allen keys are. The entire set is well layed out and labled

great set!!!
this set is a great value. it comes with every kind of bit you can imagine. they are not the strongest bits in the world but they are pretty tough and for the price you cant go wrong. the case is great too. all the bits have a marked spot both size and what kind of bit it is. very well thought out. if you need screwdriver bits dont wast your money buying 1 or 2 at a time get this set.

great
I think this is a tool that everyone must have at home, in a perfect case and well organiced. ... Read more

Features

• Full One Year Warranty
• Complete residential real estate finance solutions
• Annual and periodic term and interest
• Complete loan amortization
• Works as a standard math calculator

Features

• Massive new bumper designed for increased hook life.
• 1-1/4" wide blade (25% wider) for more durability, easier to read graphics, stronger stiffer blade during use.
• 11 foot of blade stand out, the longest in the industry.
• Dual material ergonomic case. Small comfort grip, smaller than most 25' tapes.
• Exclusive cushion grip built into the case for comfortable non-slip grip and impact resistance.

Reviews (11)

Everyone should have one of these
I like the Fat Max 25. I like the Fat Max 30 even more. And why not ? There's more to like. Either way you have the beefiest tape on the market. No other tape even comes close to the rigidity of these bad boys. I love standing in the middle of a room and being able to measure from wall to wall without laying it on the floor or getting assistance from somebody else. I love being on a ladder mesuring fascia boards from a point 10 feet+ away and my tape doesn't crack. It works better in the wind. It allows measuring higher above than ever before. It positively will win any tape fight anywhere any time. If you wear it on your pocket , just beware of carpenters crack! These little beauties are pretty heavy.

Replacement Blades for Fat Max Tapes
I really liked the Fat Max 30' tape. However, Stanley does not make replacement blades for it. My Fat Max is a little less than a year old and has developed a hole at about the 11 foot point. Because no replacement blades are available, the cost for replacing it with a new one is too high. Too bad Stanley doesn't stand behind the fat max with replacement blades like they do with some of their other less sturdy tapes.

claims
My new stanley fatmax is advertised to stand out to 11 feet.
Ha HA mine may make it to 9 feet 6 inches.and Stanley won't even respond to my e-mails.
Is this the way to treat a long time custmor? I think not

Now.......my secondary tape
I've gone thru three in one year. I'm a builder so that is slightly above average for my use. But I do keep buying them. My major gripe is that none of them really stay hooked very well when moving. Also they will slice through your finger in a flash if you're used to finger braking.(too fast retract) It is also tempermental in retracting if used past 15ft. I've seen 'em live & die from second floor to concrete. BUT....it does have a fantastic standout. Good, but buy it on sale.

Great tape!
This is a wonderful tape measure that will really take abuse. I love the 11' stand out. I agree with the point that others have made that the return and be a bit fast, I've gotten small cuts and bruises or blood blisters on my pointer finger a few times when I've gotten it pinched and it returns. But I've learned to keep it from returing so fast (just tip it so the blade is aimed down as it get to the last few feet). It isn't a cheap tape, but then again it isn't built like one either . . . .

{edit}My tape cracked, so I'm going to have to replace it, but there is no doubt I'm going to get another FatMax!{/edit} ... Read more

Features

• Can save up to 50% off utility costs annually
• Endless hot water
• Delivers up to 3.5 gallons per minute
• Horizontal venting
• Compact, light weight, and mounts on wall

Features

• Reusable with replaceable filters
• Reusable N95 mask from AOSafety is ideal for woodworkers
• Soft rubber facepiece with two exhalation valves
• Comfortable for extended wear and makes breathing easy
• N95 filters are replaceable for economical and repeated use

Reviews (1)

Best darned particulate respirator around
This is the first "woodworker's" or nuisance dust mask that I've been able to wear for more than 5 minutes without wanting to tear it off, throw it to the ground, stomp on it, douse it with gasoline, and set a match to it.
The rubber mask seals completely around my face, even against my beard, without being so tight as to cut off circulation to my brain. There are no air leaks fogging up my safety glasses. The dual exhalation valves really make the mask more comfortable for extended wear.

Add to all this the industry-standard round filter elements and this mask just can't be beat. ... Read more

Features

• 2-year limited warranty on machines, parts, and accessories
• 9-amp induction-type ball bearing motor for long lasting trouble free operation
• All purpose 12,500 rpm spindle speed handles any routing or shaping job including horizontal panel raising
• Die-cast aluminum 18- by 20-inch table provides ample work support; integral slot facilitates use of accessories
• Removable on-off switch prevents unauthorized use of machine

Features

• Nonslip
• 12-inch screw
• 8-1/2-inch maximum opening
• Hard maple jaws
• Nonmarring

Reviews (3)

Great Clamps for woodworking.
These clamps have been around for ever. Any good woodworking shop has a pile of them. Get them in pairs at a minimum and get a variety of sizes you won't be sorry. They last a lifetime and more.

Oh yeah the other dimension you need to know is the distance from the tip to the middle spindle on this clamp is 6 inches.

i love em
these clamps are ill as all... we had them in woodshop in school and they sure as hell can take a lot of abuse (if a constant 7 hours of use by highschool kids isnt abuse, i dont know what is) when i first started to buy tools my first purchase was 4 of these, you can never have too many of them, and they work perfectly and never mess up your work, i love em

Jorgensen #2 clamps
I own a small cabinet makeing shop and have been useing Jorgensen clamps for years. I prefer the number 2 because its a middle of the road size for most wood working projects. My number one preference for the clamp is the way the wooden handles are attached to the threaded steel. I have never twisted a handle off yet when clamping. The versatility of the clamp also allows you to clamp irregular pieces together by not drawing the clamp together uniformaly.The hard maple does not mar your work surfaces either. Another plus to Jorgensen clamps has to be the ease of glue cleanup when a little to much runs onto the clamp. A great clamp that either a novice or experienced woodworker will come to depend upon when working on there favorite project ... Read more

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• Tool free blade changing
• Accepts universal and t shank blades
• Horseshoe balance system for cleaner cut

Reviews (3)

a shoeless wonder
The black shoe falls off regularly (which knocks the transparent covers off, as well). Received a replacement, but don't know if it's going to work. Grat for sawing curves with bevels...just can't saw straight at 90 degrees. Blades bend from lateral movement while sawing. Not a good 'un. Go with Bosch or Porter Cable. Got sharp teeth? Buy a coping saw. Or a knife. Wish I had....

I should have bought the Bosch
I am on my second saw in 6 months with little use

Good points:

Lots of power
Accepted universial and T shank blades

Bad points:
Sole plate sticks and is hard to accurately adjust.
Both saws pulled to the left when cutting.
Could not cut a straight line using a guide fence, blade would pop out of guide roller or pull the wood lose from a clamped down guide fence resulting in a bowed cut. The cut was also off perpenducilar. Got two different stories from Dewalt on this. One person said it should saw with a guide fence(straightedge) another person said it wouldn't and I needed to buy a different tool.

Need to improve Keyless blade
I purchased this item and the only problem that I have found is the keyless blade system. The operator manual doesn't mention that you must have the blade attachment at the right position before the keyless blade will function. To set the blade attachments to the right position you will have to operate the jig saw and try to stop the reciprocating blade shaft attachment to the exact position. This will require few trys and lots of patience. ... Read more

Features

• Tool-free depth adjustment
• Factory reconditioned to perform like new!
• Magnesium frame and magazine weighs only 7.5 pounds
• Only 12.75-inches tall, can drive nails in the tightest openings
• Delivers plenty of power, 900 in./lbs. @ 100 psi, for engineered lumber

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order.
• 550-inch/pounds of torque
• Carbide-tipped chuck jaws
• 360-degree side handle

Reviews (4)

Powerful Tool and good quality
I very much like my 24v dewalt. I use it for all my heavy duty drilling for my home.

A word of advice, it is very heavy. If you want a lighter tool then go with the 14 or 18v product. They both work well. If you can handle the weight this tool is the only drill you might need.

I think it is very well made and the unit came like new, and hasn't skipped a beat.

-need this much power? buy a corded
This drill is a heavy, monster of a bad idea. The 18v is really on the edge of being oversized, (I LOVE mine, best ever) but this thing is just plain uncomfortable. So much torque you need two hands, so much weight you will need two hands. TOO MUCH MONEY TO SPEND ON A DRILL THAT WORKS WELL IN SUCH A LIMITED NUMBER OF JOBS. Maybe a pro could find a couple more uses for this, but concrete and steel are the only uses I could figure, and for concrete, you best apt to get the dw004, of which I'm very pleased.
18v is way big enough.

plenty of power short term
This kit doesnt come with any extra batteries and when you use it constantly you will have to take a 1 hour break so that you can recharge your batterie and it has been very difficult to find extra batteries (which are about ...). I wish that I had never bought mine.

Great drill
Excellent two in one tool with plenty of power for any job. It is very well balanced with good feel and its hamemer is at ease in fast penetration of brick, block, stone and concrete of most compression strengths, aggregate compositions and ages. Quick charge system as well. Only downside its price, but you get what you pay for. ... Read more

Features

• Easy blade changes
• Factory reconditioned to perform like new! Limit 1 per order.
• Advanced micro height adjuster
• Soft start and electronic brake
• Variable speed adjustment

Reviews (2)

you cant go wrong
if your lookin to get a hard working 2 h.p. plunge router but are "ify" about spending alot of cash than you got to get this p.c. recon. has plenty of power and easy to handle works great as hand held and as an undermount...gulit free spending

Porter Cable's answer for delicate inlay's
This is the perfect router for fine woodworking inlay work, with the soft start woodworker's won't need to worry about moving jigs and guide plates on start-up, it is also nice for those of you that install Soss hinges, and of course Porter Cable is second to none when it comes to routers, I rate this as a top buy for all you woodworkers. ... Read more

Features

• 10 of the CF450S
• 10 of the CF456S
• 10 of the CFS406S
• Chromium Steel

Features

• One-year warranty through the Dewalt factory or an authorized service center
• Factory reconditioned to perform like new! Limit 1 per order
• 5.2 amp motor
• Can remove up to 3-/32-inch in a single pass
• 1/2" rabbeting capacity

Reviews (1)

DeWalt DW680KR review
An amazing tool for the home shop enthusiast or professional woodworker. This device has a simple and comfortable feel to it and requires little practice to master. The easy to read and precise blade depth adjustment is one of the best features of this product. The location of the cord exit is also a nice and well thought out feature. I had to retire (begrudgingly) my Makita planer that dad passed on to me after many years and thousands of hours of trouble free use. the DeWalt name has proven itself time and time again as an industry leader in quality for professionals and new users. To prove the quality if the tool, we demonstrated the power of the planer on an 8" diameter green pine log at the hardware show here in the Twin Cities. I had many amazed looks as we accurately shaved off the bark and worked the piece down to a nice & clean square in short order. **Please do not try this with your tools at home as it is not designed for this particular use.** It was utilized as a drastic example to prove the power and functionality of the tool. You are always at your own risk with any tool. (power or otherwise) Wear all the OSHA approved safety equipment at all times. You can't buy a new set of hands, eyes or ears at any hardware store. No one stocks them yet. Enjoy all the DeWalt products, I most certainly do.
Jeffrey B. Curtis
Plymouth, MN ... Read more

Features

• 0-2,400 rpm and 0-3,000 bpm for faster application speed
• 3/8-inch square drive with hog ring retention
• Factory reconditioned to perform like new!
• 1,200 in./lbs. of maximum torque for a wide range of fastening applications
• Compact size and weight allows access into tighter areas

Features

• Limited Warranty
• Hammer-Drill provides up to 495 in./lbs. of torque and features an all-metal ratcheting chuck with carbide jaws for the highest grip torque on bits
• The Hatchet features a 6 position pivoting handle and an Orbital action selector for aggressive wood cutting or straight reciprocating action for metal and plastics
• Circular Saw cuts up to 145 2x4s on one charge!
• The Job Site radio features Rockford Fosgate« Sound System w/ Punch EQ and a rugged construction that withstands 8 ft. drop to concrete

Reviews (6)

Incredible set of tools
This is my first set of cordless tools. They are unreal. When working on a roof or away from a power supply this is the only way to go. We used the hammer drill to drill for and set over 300 tapcons in cement block. It never slowed down except when the batteries needed changed which was not that often. The circular saw will amaze you with its power. Radio is now the first tool out of the truck. The hatchet is not as pwerful as a corded one but with the adjustable handle and the ability to make one or two cuts without having to drag out the cord more than makes up for the lesser power. I love this set and would recommend it highly.

No problems thus far....
I have had the set up for a year now.
1) I use the radio everytime I go into the shop. It has ports for CD player which I hook up my Mp3 too and sounds great, It says you can recharge your cell phone with a spare outlet but I have not tried it. I also like plug on the cord. It has a female end on it so you don't plug up a outlet when you plug in. It has a bay to accept a 18 v battery and is easily portable. Nice unit.

2) The drill is powerful. I know the dewalt fans say they like the reverse on the dewalt but I like the power and thin handle which is easier to hold for me. It also comes with a strap handle so you can really put screws in deep with out breaking your wrists. I never boggs down...pure power almost more than I need unless Im going to bulid a deck in a day .

3.) The hatchet I used when I renovated my dads bathroom and although it was portable it really seemed underpowered when put side by side to its eletrical big brother. My cousin and I tested them side by side on studs and the corded sawzall ripped through twice as many in a wall demolition. The Hatchet does do the job and I porbably would not of noticed it if my cousin didn't bring his sawzall. Also one has to take in consideration of the portability and the folding handle to get into tight places.

4.) The Circ Saw is sweet. Its the only one I own and it cuts everything from plywood sheets to finish work. I put a thin matashuta blade on it and it works great. plenty-o power with postitive stop on releasing the trigger. The saftey on the switch is awkward, but I guess it would not be "safe" if it were easy to depress. Nice unit too.

5.) The light is a light with more Volts added to the battery. I have a hitachi 9.6 volt that is relative to brightness to this one, but the clear advantage is longer battery life with the 18 volts and brightness in the tail end of battery death. This light came in handy in a black out and my wife thought I was a genius when a blackout hit us and I pulled them out.

Overall its pricey but I am really glad I made the purchase. I know the power is there when I need it.

Nothing But Heavy Duty!
I'm a believer. These tools are the standards which others are measured against... and come up short. The hammer drill has 495 in./lbs. of torque and is bulletproof. The Sawzall 'Hatchet' is an engineering marvel. The circular saw has plenty of power and a blade brake, which is very desirable. The radio rocks! A worklight and monstrous contractor's bag are just icing on the cake. Milwaukee's lifetime warranty makes this purchase a no-brainer.

WHAT A DISAPPOINTMENT!!
I'VE ALWAYS BEEN A DEWALT FAN, BUT DECIDED TO TRY THE MILWAUKEE BRAND- BIG MISTAKE! THE SAWZELL WORKED FOR ABOUT AN HOUR OUT OF THE BOX BEFORE THE SWITCH AND BUSHINGS WENT BAD AND THEN THE METAL CHUCK ON THE DRILL IS OUT OF BALANCE AND VIBRATES. ALTHOUGH THE SERVICE CENTER WAS HRLPFUL, DEWALT MAKE A FAR SUPERIOR PRODUCT. THINK TWICE BEFORE BUYING...

keeps getting better
I have the Milwaukee combo 6514-25 and I love it, the only difference between the two is that this combo has a hammer drill instead of a standard drill/driver. You cant go wrong with either combo.
I did have a problem with the switch on the Hatchet, but Milwaukee fixed it superfast and shipped it overnight to me via Fedex, i have not had a problem with the hatchet since and that was about a year ago.
No matter which brand you buy theres always that risk that theres a defect. Whats sets the companies apart is how fast they will acknowledge and correct the problem. For my tool it took them less than a week. Milwaukee has great customer service. ... Read more

Features

• 30 day money back guarantee and 1 year warranty
• DS18DVB 18-volt cordless drill
• C6DC2 18-volt, 6-1/2" cordless circular saw
• CR18DV 18-volt cordless recip saw
• Comes complete with two batteries, charger, flashlight, and contractor bag

Reviews (3)

Awesome Value
I recently found this combo kit on the "bargain rack" at the contractor's favorite mega-store. Out of curiosity I picked it up thinking that it would be a fine stand by set if needed. Amazingly these tools can dish it out with the best that I have seen/used. They are well built and powerful. As already noted, if you follow the simple instructions for ensuring battery life via cycling to start out then I think you will find plenty of power to spare.

For the price paid, and even for more, I think you will find the Hitachi 18V set very satisfactory.

Hitachi Tools Deserve A Closer Look
After twenty years of marine construction as a heavy timber dock and pier carpenter and commercial diver I have been pleasantly surprised by Hitachi. I have been a card carrying member of a professional line of tools known by their red boxes and stellar reputation as hard hitting durable tools.I had a kit like this one built by the red box company but was really unhappy with the power and I had to send in two out of four tools due to breaking on the job. I replaced that kit with this hitachi kit and have come to appreciate Hitachi. The previous reviewer apparently failed to read the part in the instructions where it talked about cycling the batteries a couple of times before they will hold a full charge(!) Well I have been using this kit hard and it is one hell of an arsonal. Good battery life and strong enough to feel like a corded tool. The circular saw has a light for the blade that helps and the motor doesn't bog down like most battery powered tools, the recip. also dishes out the power. All-in-all a great kit when you need the power but don't have enough of a job to justify humping the cords to the jobsite!

Thanks to Hitachi!

Don't bother
I purchased the Hatachi kit just for pick up work, instead of hauling out extension cords, and running my generator. I ended up doing both as the batteries and lack of power on the circuler saw left me with no other options. I made six cuts on treated 2x6 on a freshly charged battery. The drill using a new 11/8" flat bit drilled maybe 10 holes before dying on a freshly charged battery. I tried re-charging the batteries to see if they would come to life, but they haven't. This set is on it's way back. I don't have time to mess around with something that doesn't work. ... Read more

Features

• 3/8" x 50' PVC hose is included
• Levelwind layering mechanism ensures the hose retracts evenly and easily
• 3/4-inch ID swivel reduces flow restrictions and improves performance
• User can select "Free Run" for fast rewind or "Latching" to latch the hose
• Mounting bracket allows the user to secure the reel in 1 of 7 positions

Reviews (1)

solve your problem
Before now I hardly use the compressor because of the harass to deal with the hose, you know, go get the hose! unwind it, undo the knots and all that stuff. Finally thanks God there's something that is really useful. With this case you protect and keep your hose very easily and doing that you really feel like working more often. You won't regret buying this wonder case!! ... Read more

Features

• Extra long 52" premium PVC hose
• Ultraviolet resistant, translucent polyethylene tank
• Extra wide 3-1/4" mouth opening for easy fill and cleaning
• Fast pressurizing, 10" non-corroding polymer pump
• Heavy-duty 18" rotating brass wand with adjustable brass nozzle

Reviews (4)

Best I've ever owned.
I've gone through a few sprayers over the years, usually getting whatever was at Home Depot of Ace Hardware. For the price, this is the best one I've owned, BY FAR. Excellent heavy duty construction, metal wand, carrying handle (so you don't use the pump handle), and pressure relieve valve. Excellent workmanship and works like a dream You won't be sorry if you get this product.

most excellent product
I just received my sprayer yesterday, and am impressed with how easy it is to use. And a good, consistant spray makes for happy plants. This is a real bargain, and solidly built. I expect it will last for years to come. VERY HAPPY WITH THIS!!!

REAL QUALITY
This is a quality item, with all the features even the pro's can appreciate.This thing even tells you when it's at the ideal working pressure, via a gage on the relief valve.Right out of the box this unit went to work, without as much as a stray dribble.The nozzle is adjustable from stream to spray so, it will reach into the tight spots, no problem.If you ever need parts it comes with an order form and a toll free number.If you take care of this item and follow the maintenence guidelines it will last forever.Check your local garden center and you'll see others with similar features but, this one has them all. I do recommend this tool. It's priced right and has all the bells and whistles too. Now get out there and control those weeds

Good product
This is one of the most used tools in our lawn care arsenal. It is very easy to use and doesn't get too heavy to carry when full. We use this for spraying weed killer on spots in the yard and for spraying insecticide both in and out of the house. We may not use it everyday, but it is sure handy to have. It certainly helps us out by saving us the cost of hiring an exterminator. Its stream can be adjusted from a spray mist to a solid stream so it can reach behind or under anything an exterminator's spray could get to. This is a really good product. ... Read more