Features

• 19-3/4" cast aluminum base is 2X more rigid than a standard 10" base and folding tables
• One-year warranty through the Dewalt factory or an authorized service center
• Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
• Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
• Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine

Features

• Includes adjustable pressure nozzle for 100 to 1500 psi and rotary turbo nozzle to boost effective pressure to 1750 PSI
• Dual 12 oz. interchangeable soap tanks for extra cleaning effectiveness
• 25 ft high pressure hose
• Uses 80% less water than a garden hose

Reviews (1)

Be afraid be very afraid
This unit should not be called reconditioned.I was sent a very used very diry machine lacking parts.I would not reccomend.Buyer beware ... Read more

Features

• |3/32 to 1/2 -full range of bit size capacity|Diamond wheel -Holds up to the hard material bits -carbide and cobalt|Split point capacity -the bits that will not ""walk"" on a hard surface"
• Refurbished with full 1 year manufacturer's warranty

Features

• User can engage contact trip lock-off and prevent accidental dis-charge of fastener.
• Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician.
• Works as fast as you do with consistent nail penetration into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints.

Product Description

Duty cycle: 20% @180 amps. Amp control dial provides infinite output adjustment. Integrated thermal overload circuit & breaker for added protection. Built-in storage for rods, cords, helmet and accessories. (Electrode containers not included). Quick-connect dense plugs for easy removal and storage of cords. Multi-position cart allows the welder to be placed vertically or horizontally for easy access to controls, 230V single-phase welder easily welds thick steel. 225 amp AC maximum output. Infinite shunt control offers more precise adjustment when matching welder heat to metal thickness. Integrated cart for greater portability and convenience. Includes a starter pack of stick electrodes, chipping hammer/brush, and protective face shield. 5 year manufacturer's warranty. ... Read more

Features

• Amp control dial provides infinite output adjustment
• Built-in storage for rods, cords, helmet and accessories (electrode containers not included)
• Multi-position cart allows the welder to be placed vertically or horizontally for easy access to controls
• Integrated thermal overload circuit and breaker for added protection

Features

• Aluminum roll cage protects the unit from a 10-foot drop
• Jobsite radio/CD Player with anti-skip technology; MP3 and CD-R/RW compatible
• Integrated antenna eliminates antenna bends or breaks
• 4-way GFCI power outlet to easily power-up jobsite tools and equipment and a 12V DC outlet ideal for charging cell phones
• Charges--and runs on--Bosch 12- to 24-volt batteries

Features

• One-year warranty through the Dewalt factory or an authorized service center
• 4.5 cfm
• Dual soft start valves assist in cold weather start up
• Cast iron cylinder enhances pump life
• Oil lubricated pump allows for long life

Reviews (1)

Superb compressor
Don't let the word "reconditioned" scare you off from purchasing this...the one I got looked and operated like it was brand new. The compressor is great and relatively quiet for what it's rated for and the size. This is probably one of the easier compressors to carry around to job sites. The layout of the gauges and hookups are good as with the drain plug. With Emglo's name behind it, this Dewalt compressor should withstand abuse and should last for years. Definitely value for the money. ... Read more

Features

• Dual side-by-side laser diodes for an extremely bright, visible beam
• Protected rotary head and side impact roll cage for increased durability
• Built-in bump sensor alerts user if laser has been bumped after leveling
• Factory reconditioned to perform like new!
• Manual leveling system is accurate to + or - 1/4" at 100'

Features

• User can engage contact trip lock-off and prevent accidental dis-charge of fastener.
• Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician.
• Works as fast as you do with consistent nail penetration into both soft and hard joints.
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Depths can be easily referenced utilizing numbered dial and user does not sacrifice performance when changing depths in hard wood joints.

Features

• Auxiliary handle
• SDS-plus
• 4.4 amp
• Dual mode
• Variable speed trigger

Features

• Dual side-by-side laser diodes for an extremely bright, visible beam
• Protected rotary head and side impact roll cage for increased durability
• Built-in bump sensor alerts user if laser has been bumped after leveling
• Factory reconditioned to perform like new!
• Manual leveling system is accurate to + or - 1/4" at 100'

Features

• Accurate to +/- 1/8 of an inch per 100 feet
• Remote control operated scan mode creates a "laser chalkline" between two points
• Factory reconditioned to perform like new!
• Fully automatic horizontal and vertical self-leveling
• Out-of-level shutoff ensures accuracy, eliminates user error and reduces setup time

Features

• Protected leveling vial for jobsite durability
• Factory reconditioned to perform like new!
• 20x magnification for 200'+ range; ?1/4" per 100' accuracy
• Transit capability allows user to determine vertical angles
• 360? horizontal circle with vernier scale for precise measuring of horizontal angles

Features

• Six-month warranty on Delta reconditioned tools
• Center mounted fence adjusts quickly and easily for less down time
• Easy to adjust infeed table for fast set up
• Extra large table to support stock up to a full 6 inches wide
• 10 amp induction motor for smooth, powerful cutting action

Reviews (1)

Delta 37-070R 6" Variable Speed Bench Jointer-Reconditioned
I Rec'd The Bench Jointer Today And Was Really Pleased When I Got It Out Of The Box And It Looked Like A New One Instead Of Factory Re-Conditioned-Also It Works As Well As A New One At A Fraction Of The Cost-Loaded With Features Of A Lot More Expensive Brands-Well Pleased. ... Read more

Product Description

Duty cycle: 15% @70 amps, Carry handle allows easy portability. Thermal overload protects welder by automatically shutting off when transformer becomes too hot. 4 heat settings allows easy adjustment of output power for projects with different metal thicknesses. Infinite wire speed control allows adjustment for a smooth, even weld bead. Polarity connections located inside wire feed compartment provide easy polarity change between DC straight (flux core) and DC reverse (MIG). MIG welder is easy to use and perfect for autobody and other thin gauge metals. Also welds aluminum and stainless steels. Internal rectifier provides DC power for a smooth, even weld bead. Heavy gauge all-metal enclosure. Runs on standard 115V power. Includes MIG regulator, welding shield, flux core wire and chipping hammer/brush. ... Read more

Features

• Wire feed welder provides an instant arc, making it easier to use
• MIG kit is included, giving you expanded capabilities and increased satisfaction
• 115-Volt Input lets you plug in anywhere, saving cost of wiring for 230 volt
• 30-70 Amp Output welds 24g ? 3/16 steel, making it easy to match heat to metal

Features

• Runs off of 7.2V to 18V DeWalt NiCd batteries making it a cordless radio
• Heavy-Duty AM/FM radio with auxiliary port allows user to listen to the radio or CD (when plugged into auxiliary port
• Digital Tuner with LCD display, built-in clock, and 8 station memory presets
• 1 hour charger for 7.2V to 18V DeWalt NiCd battery packs (except Univolt batteries)
• Dual pivoting 11" flexible antenna provides more durability and better reception

Features

• Powerful 3/4-horsepower, single-phase induction motor for smooth cutting
• Three knife ball bearing cutterhead provides an even finish of cut
• Provides 14,400 cuts per minute for smooth results
• Full 6-by-46-inch table to handle long and large stock

Features

• Powerful one-horsepower motor for efficient cutting
• Extra large center mounted cast iron fence with rack and pinion adjustment
• Three knife cutterhead provides 14,400 cuts per minute for a smooth finish
• Jointer bed only, motor, stand are not included.

Features

• 10-amp, 120-volt motor for smooth, powerful cutting action
• Center-mounted fence adjusts quickly and easily for less down time
• Easy to adjust infeed table for fast set up
• Extra large table to support stock up to a full 6" wide

Features

• 6.6 Amp Motor
• 4,500 VSR RPM
• Soft elastomer covered body
• Depth Adjusting, detachable nose piece
• Aluminum Gear Case