Amazon.com

Recycled wood is wonderful to work with, but you run the risk of damage each time you machine it. Old nails, screws, and fasteners will wreck expensive planer, jointer, and saw blades quicker than a wink, but the Lumber Wizard can keep that from ever happening in your shop again. A metal detector for your wood, The Lumber Wizard locates metal buried in wood up to 6 inches thick. In addition to the sound alert, you can plug an earphone into the jack or set the unit to vibrate instead. A smart designer engineered the handle with a little bend in it, so you won’t be dragging your hand along the wood surface, a small touch we appreciate. For about the cost of a good carbide blade, you’ll be saving yourself countless ruined bits and blades. And that makes the Lumber Wizard is a smart investment.--Kris Jensen-Van Heste ... Read more

Features

• Nine-volt battery is required (battery not included)
• Detects metal in all types of woods up to 6" thick--including particle board and solid woods
• Features a low voltage vibrator, which alerts the user when metal is detected
• Pinpoints exact location of metal objects
• No calibrating, no measuring, no guessing

Reviews (12)

The new model is fantastic. It saves my tail almost daily!
I bought the new Lumber Wizard III a couple of months ago and it has been the perfect detector. After owning the first version for a couple of years I've found the new version to be much better. it is stronger, very reliable and has held up to daily use. I own a restoration shop and use a lot of recycled wood. The old version was tempermental and sometimes needed tuning but the new Lumber Wizard III has been 100% reliable. I also bought one for my father in law and he too is very happy with the new version. From my point of view this is a tool only a fool would be without.

Worth the money if you have lots of wood to check
I upgraded to the lumber wizard after having really good success with the smaller (and cheaper) little wizard from the same company. This is similar to security wands at the airports, but more "woodworker" friendly (you don't have to scrape your knuckles to get close to the wood since the handle is raised - and its half the price of the others). The vibration feature is really nice to have when the workshop gets noisy. I had to fine tune it when I first got it, but haven't touched it since (nearly 3 months). It's super sensitive, but when you get it tuned right and move it slowly and thoroughly, I doubt anything metal would get past it. Much faster to use than the little wizard as well, since the scanner area is much bigger. Well worth it if blades and time are important to you.

Glad I got one before I had to buy planer blades.
Easy to follow instructions. A little sensitive to tune in but once tuned ln I checked 30 to 40 ft. of 1X2 oak with no problem. This wood had three quarter inch long finish nails in it. I thought I found them all till I ran the Wizard over it. I like the long length and offset handle on wide boards so your knuckles dont scrape. Light weight and wide scan path make this product easy to use. Little price to pay for what it can save in nicked tooling. This is the updated Lumber Wizard III.

They improved it with an upgrade
This is a revamp of a previous review. I wasn't sure whether to order one after reading the other reviews, and after visiting the Wizard web site. Well I broke down and ordered one, and I am glad that I did. I noticed that they eliminated the large adjusting knob on the face of the unit. The plastic form pack and instructions that it is shipped in still have the bulge, where the knob used to go, and the cardboard placard still has the instructions on how to use the missing knob. Before it had the large fine adjusting knob, and a recessed fine adjust screw what was used to get the large knob within adjusting range.
Adjusting is simple now. With the single recessed screw, you simply hold it up in the air and turn the screw until it starts to squeal, then back it off just enough for it to get quiet. Now you are at the maximum sensitive setting. It is intuitive and simple enough, that you don't mind, setting it, every time you use it.
Next I wanted to check the accuracy of the unit. I took an aluminum screw and parked it under a 2x4. When I passed it over the squeal rang out. Good there, then I put the screw under two 2x4s, and it didn't find it. Hey if it is buried 3" deep, I wouldn't normally need to be concerned about it. The instructions call for passing over both sides of the wood, so that would cover even a piece of metal inside of a 3" piece of wood. Then I went over to a piece of 3/4 oak, and put a small brass screw under it, it rang out. Then I put it under two 3/4" pieces of wood it rang out again. Under three it failed to notice it. So the unit is great for depths up to 1 1/2".
The other thing worth mentioning is that this is a rather large unit, with the last 7" containing the sensor area. Since the sensor runs along the length of the unit, as compared to across the face, you get much better results, when making a pass that brings the length of the piece of metal into the length of the sensor. So you want to be sure and pass the detector over the same area at right angles to one another.
Sorry for mentioning the obvious but the larger the piece of metal, the easier it is to detect.
Pertaining to the battery holder, I noticed that a reviewer was having trouble with that. I don't know if that was improved over the earlier unit, but the way it is now is great. It removes easily, and reinstalls easily as well. You simply push in the tab and it pops right out. When reinstalling it, you simply push it back in until is snaps in place. I expect to get a lifetime of dependable use out of it.
The manufacturer suggests that you remove the battery when it is not in use, so that is why some people were not getting a lot of use out of a single battery. With the ease of removing the battery, makes this a no hassle procedure. Simply put, you don't mind having to remove it.
In conclusion I have to say that I now highly recommend the Wizard Detector. It is easy to use, works dependably, even when testing it on different pieces of wood. Considering the price of buying an airport security level of detector, makes this Wizard a no brainer. I don't know how it worked before, but this new upgraded unit does the job I was hoping it would. Buy it you won't be sorry.

Good Under Ideal Conditions
This tool can be made to work, and can save blades. But, it is far from perfect. Keep a test board with a known nail handy, and swipe it occasionally during use. Otherwise, the tool will drift off sensitivity, and you won't know it until your $$ carbide blade tells you... The tool is VERY sensitive to humidity, which is fine if you're in one of those spiffy shops that Fine Woodworking is always featuring, but if you're under a tin roof shed on a humid, rainy day, trying to turn salvaged heart pine siding into flooring, well... just forget it. ... Read more

Amazon.com

What a super compact size—it looks like a toy and drills like a beast. At just about 3-1/2 pounds, it's like a feather to hoist overhead, but there is absolutely no sacrifice in torque, delivering 350 inch-pounds. We like the speed range choices, from 0 to 400 rpm in low gear and 0 to 1,400 rpm on high. The keyless chuck operates smoothly, and you get a flawlessly secure bit grip every time with the ratcheting mechanism. The grip is comfortable, and the whole tool feels supremely balanced for all-day comfort. It would be perfect for cabinet installers and HVAC ductwork because of its compact size, but we also think it's a great choice for the homeowner, especially those with smaller hands. DeWalt construction is rugged and durable, so you'll have this little worker around for years and years.--Kris Jensen-Van Heste ... Read more

Features

• 3/8" single sleeve keyless ratcheting chuck for tighter bit grip
• Compact size: fits into the tightest conditions
• Lightweight design (3.9 lbs.) minimizes user fatigue
• High performance motor delivers 350 in.-lbs. of maximum torque
• Dual speed range: 0-400 / 0-1,400 rpm delivers optimal performance

Features

• Externally accessible carbon brush for quick and easy brush changes
• 2-piece rare-earth magnet motor for greater durability and increased performance
• Class leading 550in/lbs of torque to power through the toughest jobs
• High capacity 3.0 Ah batteries allow for longer run time and fewer battery charges
• 22-stage ratcheting slip-clutch for high torque and/or precision driving

Features

• Automatic shut-off after 5 minutes
• Angle accuracy to 1/10 of a degree
• The mode button lets you see angles in 3 ways - degrees, % slope or pitch
• Audible tone allows for hands-free operation
• Runs off of a standard 9v battery

Reviews (7)

POOR FACTORY SERVICE
I HAVE AN OLDER MODEL SMART LEVEL AND IT QUIT WORKING. I CALLED THE SERVICE DEPARTMENT AND WAS TOLD "JUNK IT" AS IT WAS A SEALED UNIT AND COULDN'T BE WORKED ON. iT SEEMED TO BE AN ELECTRICAL PROBLEM AS IT WOULD COME ON AND THEN GO OFF LET IT SIT FOR SEVERAL HOURS WITH NO BATTERY AND PLUG IT IN AND IT WOULD COME ON AND GO OFF.

i ASKED FOR SOME TYPE OF REBATE ON THE NEWER MODEL AND WAS TOLD JUST GO BUY IT AND PAY FULL PRICE.

Nice Product for the Novice
I am a home owner and handyman. I needed something to help with chores around the house. Laying out walls and working in my garage. I have a standard 3' level that serves me very well. It came to me after reading the reviews on this level how nice it would be to add the sound so you don't have to stare at the bubble.
One review made mention of the end caps or lips on the level. I found a very small build up of paint on one end. Once the unit is put through the zero setup procedure, this build up should not come into play. A piece of sand paper on a flat work bench to "lap" the end would fix it. Agreed, this would "blemish" the looks of the paint, but it would make it true from one end to the other. I for one, could not send the tool back because of this.
I am impressed with the quality of the level. It's easy to zero in and accuate once set. I found that even the pitch was very accurate. I can see that if I was a builder by profession, this would be a great addition to my daily used tools.

Nice Product...

Professionally done!
We have used the SmartTool for over 10 years in our analysis of ramps, curb ramps and walking surfaces for access to people with disabilities. This has been the 'tool of the century' for us to be able to accurately measure the slope and cross slope of an accessible route as it relates to the American's with Disabilities Act. Furthermore, with it's reasonable price, we can easily recommend it for purchase by contractors, architects, and facility managers to assist them in assuring the proper construction within the required design parameters of the ADAAG [The ADA Accessibility Guidelines]. Our hats off to Maclanburg Duncan for their product.

Niced features, bad customer service
I was familiar with their older product. I used a friends a few times and liked it, so I bought this. They changed the design in in doing so, have made it of a cheaper quality. The old design was a brushed aluminum with grips that were very useful. The new design is flat bar type aluminum that is painted.

I put the level on my table saw top to calibate it. I noticed a gap under the level. The frame of the level was not flush. The reason is the end of the level had a small ridge on it causing the level not to sit flat.

I called their customer service and they were friendly. However, I would have to pay shipping to return it, and then pay a shipping and hadling fee to have it returned to me. I would think they should pay for their error, not me.

A must for ADA survey professionals
The Macklanburg-Duncan 24" SmartTool is the fastest, most accurate way to measure slopes and cross slopes of ramps, walkways, and parking areas for Americans with Disabilities Act (ADA) compliance. One big improvement over the older SmartLevel instrument is that the calibration function is much simpler and much faster. Since it takes less than a minute, I can ensure maximum accuracy by recalibrating the SmartTool at the start of each survey job. Also, I particularly like the hold function which allows you to freeze a measurement, then pick up the tool to take a reading. If you do a lot of ADA survey work, this tool will pay for itself quickly. ... Read more

Features

• DW908 18V pivoting head flashlight which allows light to be projected in any direction
• DC759 18V 1/2" compact drill/driver with 450 in.-lbs. of maximum torque
• DW936 18V trim saw with 5-3/8" 16 tooth carbide blade and rip fence can cut 2 X 4's in a single pass
• DW938 18V cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft

Features

• 18V circular saw with 6-1/2-inch, 16-tooth carbide tipped blade for super fast cuts
• Rip fence cuts 2-by-4's at a 45-degree angle in a single pass for less downtime
• 18-volt, 1/2-inch hammer-drill for fast drilling and driving
• 500 inch-lbs of maximum torque for larger applications
• Patented 3-speed all metal transmission for versatile hammering

Features

• One-year warranty
• 8" Diameter semi-pneumatic, ball bearing wheels - easy rolling over rough job sites
• Rugged 1" diameter all welded steel frame, plus heavy-duty rubber tie-down - for convenient storage and easy transportation
• 4 Sockets - holds any 1-1/8" hex collar insert tools
• Shock-mounted handles absorb vibration

Reviews (9)

Not that scary!
Recently, I have to do a tought plumbing job. I was worried if I was going to be able to jack-hammered a 4 inch concrete floor. We went to a tool rental place and got the Bosch Brute Hammer. In the beginning I thought "is going to be a scary kind of job". But I was wrong. In a few hours I was able to complete the whole job. The vibration was not bad after all. It is not a tool that I need on a daily basis, but is was a good help for me that day. Also, the hand truck was great with all the tools orderly in place.

Awesome Power
This workhorse wont let you down and will perform like a dream. Watch the video that Amazon provides, it's cool...and informative.

Great Tool-Worth every Penny
If you want to save time, back aches, etc. get this tool. I wish I would have sooner. Highly recommended. It's very dependable

dependable and gets the job done.
I have used this tool to demo a flagstone/concrete patio and about 80 feet of sidewalk. I first tried the sledgehammer/prybar route, but that was too slow and tiresome. I got the job done by myself in less than 8 hours with this tool. It is quieter than gas/air powered hammers, but I still wore ear protection. It is easy to operate and not very fatiguing-the most tiring part is picking it up and setting it down. It is heavy, but I could lift it into the trunk of my car by myself. With 2 people lifting it is a breeze and the cart makes transporting it very easy. I ran it hard all day and it never complained- and this was a pretty beat up rental tool. I highly recommend this tool if electricity is available-it is much more convenient than gas and compressed air hammers. Plus it is powerful and durable enough for all but the biggest demolition jobs.

Highly Recommended-Worth every Penny!
My company rented this a few times and we can't live without it, so the company bought one and everyone on the site loves it. I have several contractor friends on other sites and they too rave about the Brute hammer. This hammer really is a life saver. When you use this tool it sure cuts down on the time it takes to complete a job. Be sure to get the cart, it sure makes life easier. ... Read more

Features

• Automatic shut-off after 5 minutes
• Angle accuracy to 1/10 of a degree
• The mode button lets you see angles in 3 ways: degrees, % slope or pitch
• Audible tone allows for hands-free operation
• Runs off of a standard 9v battery

Reviews (2)

Traffic Collision Investigators -- you need this!
The Machlanburg-Duncan 92346 SmartTool Module Only is an excellent, handy tool for determining grades to add or subtract to speed/velocity formulas that require this information. The module is small so it is easily portable. If I can avoid all those formula conversions to get % to degrees and vice versa...trust me...I will do it! This is one of the best tools in my t/c tool chest!

Why measuring angles digitally is better!
The Macklanburg-Duncan 92346 SmartTool Angle Finder is only 6 inches long, which allows it to be used in small places. You can get the angle reading even when you have placed the tool in a position where you can not read the display. You simple place the tool in position and press the Hold button, then remove the tool and read the display. The digital readout is easy to read and is accurate to 1/10 of a degree. With an analog angle finder the best you could hope for is plus or minus 1 degree and it would not be able to be used in the above situation. If you need to measure a long object, you can mount the SmartTool Angle Finder in a Macklanburg-Duncan brand 6000/6500 level. On top of all this it is weather and water-resistant. ... Read more

Features

• 13 amp motor delivers power for drilling holes of all sizes
• Two operating speeds: max 1750 rpm in high, clutch in low gear range
• 90-degree left to right Roto-Lok handle offers maximum operating comfort
• Removeable side handle offers added control
• Impact resistent carrying case included

Reviews (2)

Hawg Heaven
The new "Super Hawg" is what all hole drills should be. As a Southeast Texas homebuilder I put it through it's paces and it has turned some of the dreaded work into pleasure. I shopped all of the hole drills before chosing this one. It costs a little more than the others but it is worth it. I am very impressed with it's high quality construction, power, and comfort. The swiveling trigger handle is a feature all hole drills should have. The more powerful motor, (almost twice the competition), is put to good use running the drill at higher RPM's than all of the competitor's. This is one fast hole drill.

Milwaukee Improves Tool
This is an improved version of the Hole-Hawg. This new tool has more power, easier to use, and fits into tight spaces better. I depend on Milwaukee tools for my livelihood and they delivered a great new tool with this one. ... Read more

Features

• Range: 325 for 26x
• Automatic wire hung, magnetically damped compensator minimizes errors on the jobsite by keeping line of sight continuously level within +/- 15 minutes
• Establish and check angles without repositioning the instrument with the 360 degree horizontal graduated circle and infinite tangent screw
• Magnification: 26x
• Accuracy: +/- 1/32@100' for 26x;

Amazon.com

This tool makes humans as close to foolproof as we can get, at least when it comes to measuring, cutting and installing trim without a flaw. We love that it’s a solid piece, with nothing adjustable on it, so you know its 45- and 90-degree angles are always true. It takes the gymnastics out of measuring, too, whether screwed to your workbench or temporarily tacked to the working wall with 6d finish nails, because of the built-in tape measure hooks. Even tricky inside-to-inside miters are a snap. Perfect 3/16-inch reveals on windows and door jambs are guaranteed every time: Just line it up and draw your guide with the pencil holes. Though it’s marketed for casements, we’d keep it in the toolbox for all kinds of jobs. Imagine installing baseboard up to door trim and lining up the Trim Loc for a perfect cutline every time. We think it’d be the perfect gauge for squaring saw blades, too. This little tool will save you time, money and lots of frustration.--Kris Jensen-Van Heste ... Read more

Features

• Solid polymer
• 8 tools-in-one
• Install trim faster and more accurately
• Eliminate measuring errors, reduce waste
• Save time and money

Reviews (6)

Handy
This is handy especially if you work alone. Makes trim installation easier after you become familiar with it. Beware that the older model was made from quality aluminium and this is now a cheap plastic.

My, how revealing.
I grabbed one of these at a home center a while back. I was at first impressed by the look and feel of it. I have used it when installing trim, building cabinets, and doing layout. I genuinely find the tape measure slots handy because I do most of my work alone and find it difficult to accurately span a six foot opening wihout a lot of cuss'n, spitt'n and chew'n. Also, I think the orange color compliments my yellow tools.

It is a lot more substantially made than it appears
When I ordered the Trim Loc Casement tool, I thought it would be a flimsy lightweight unit. I was surprised when I received it that it was built out of such thick aluminum. It is protected with a baked on finish that should last. It is one of those simple tools that give you big consistent results. Trying to eyeball the casement trim offset won't give you the consistent professional results of this tool.
I have several Bench Dog tools, and not one of them is less than best in class. They are decorated in many woodworking reviews, and this one deserves five stars. Highly recommended.

Saves time, increases accuracy
I don't necessarily care about some of the features of this tool but for the one main thing it does it has become a "must" in my toolbox. It quickly and precisely locates casement trim when installing, making the job go more quickly and giving me more consistent reveals. Anything else it does is gravy.

JohnnyTcarpenter
This tool is the the most valuable tool I own .Being a trim carpenter this tool saves me time and the boss money !!!I can trim out a large home in a few hours and it eliminates wasted cuts.It gives me perfect miters !!! ... Read more

Features

• Includes (2) 14.4V Ni-MH batteries, multi-voltage charger and case
• Two piece D-31 motor for power and serviceability
• All metal gear transmission for smooth, efficient power
• Shift lock drive instantly changes from drill to driver
• 2.6 Ah Ni-MH batteries for greater capacity and longer run time

Reviews (2)

Great drill / driver
Will mix 50LB of thinset on a battery charge in low gear. Nice balance. Will drill 38 1 inch holes in a 2 x 4 in high gear on a charge using a spade bit. Tried a 12V dewalt, got 24 holes and had to use low gear, way too slow IMHO, the 12V also had trouble with large deck screws. The Makita drives 4" deck screws into pressure treated in high gear. Nice balance, plus came with a pretty good tool belt, Home depot package deal at $178. Western tool had them for $181 with the work light (xtra $35 landed cost on ebay typical for light), I should have bought it there but...too late. Noticably lighter than an 18V, I like the balance, but an 18V gets you more powerful tool options.

Excellent Performer
I bought one of these to replace a defunct Craftsman "Professional" cordless drill I received a few years ago as a gift. When the Craftsman's batteries finally died and would no longer take a charge, I decided to buy a better drill rather than sink almost one hundred beans in two new Craftsman NiCd batteries.

The difference is night and day.

The Makita is incredibly comfortable to hold. The NiMH batteries are long-lasting and, so far, have none of the problems the Craftsman's NiCds did. (The NiMH technology makes for longer lasting batteries generally, both in use per charge cycle and total number of useful charge cycles. NiCd is garbage.)

The clutch system works great, as does the two-speed transmission. The torque on this thing is monstrous for a cordless. I don't find the ability to "lock out" the clutch particularly useful, but it certainly doesn't hurt anything.

The chuck works really well. Nice keyless. In all, this is a great drill. I've used it on numerous projects and it always does what I ask of it. And it feels like it is going to last for a long, long time.

Nice job, Makita. ... Read more

Features

• Folded size of 2 inch x 3/8 inch x 5 feet and weighs only 3 1/2 lbs.
• Guarantees precision layout
• 4 times larger than a framing square
• Quality-constructed anodized aircraft aluminum
• Locked dimension of 3 feet x 4 feet x 5 feet right triangle

Reviews (5)

CH HANSON 345EK A-SQUARE FOLDING LAYOUT TRIANGLE
I have found that this product is of exceptional use in the tile laying industry. It guarantees you that perfect pattern that not only you want to acquire, but what the customer requires. A definite 5 star quality.

Don't build without it
This is a real time saver, being able to fold it for storing and then to fold it out and it's always square, wonderful tool!

Success at Last
I never could get a perfect 90 degree angle on my table saw sliding table until I used the 345 EK. I took me about one minute to get it right.

Time Saver
This triangle has been great.Easy to transport(folds)and has saved me many hours in various layout jobs(tile,cabinets,walls and inlaid work also).This is a Time Saver if anyone wants or needs one.I wish I would have had one many years ago,life would have been greater.It will pay for itself on the first job.Thumbs up, 5 Stars..

layout traingle
This product is excellent for laying out large jobs and really speeds up the works. I would not be without one. ... Read more

Amazon.com Review

Imagine the feel of 420 inch-pounds of torque in your hand. That's what this awesome drill/driver delivers in the lock-up position, powered by a 14.4-volt battery. Because of the two-speed gearbox, you've got drill speed ranges of 0 to 450 rpm and 0 to 1,400 rpm. Its 1/2-inch ratcheting chuck is keyless, and the 20-position clutch takes care of drilling and driving into all kinds of material. You'll never regret a Porter-Cable purchase; their drills are among the best on the market. But here's one more reason to go with this model if you're in the market for a cordless drill/driver: the interchangeable Grip-to-Fit handle inserts. Having grappled with tool handles that were too big to control, we think this system is a great idea. There are manly sized grips included, of course, but for the woman woodworker or cabinetmaker, welcome to a delight--small grips! You just can't go wrong. --Kris Jensen-Van Heste ... Read more

Features

• 1-year warranty/30 day performance certificate
• 2 14.4-volt 2.0 amp hour batteries
• Interchangeable Grip to Fit handle inserts
• 420 in/lbs torque, 20 position clutch
• Two speed gear box, 0-450 and 0-1400 RPM

Reviews (2)

recommend
durable, high quality drill, after 3 years of use the unit has held up, and I would recommend it over a dewalt 14.4 volt. I install cable and phone lines and am very satisfied with the performance (concrete, wood, brick etc)

fooled again
I purchased this drill after realizing I needed a new charger for my old PC 12 Volt. My thought was to buy the new drill and use the charger to keep my old batteries and drill. Seeing that the new charger worked with both 14.4 V. and 12 V. I ASSumed thia was a logical step. Why would anything in the tool world be logical, no need for modularity since we can throw out the old and buy new, better stuff.

So, I bought the damn thing. My new batteries are now shot after 1 year of mild use (or the charger is shot), the new charger won't charge the old batteries, and I'm looking at more drills, batteries, or charger purchases.

I refuse to buy another PC drill even though the torgue was good and not to heavy. The batteries wouldn't hold a very long charge (somewhat forgivable due to a lighter battery weight) but what really turned me off was the non-modular systems and the total disregard for past products that worked ok (but needed a new battery/charger) for the idea that a new better product exists. Thus, I say farewell to PC and hello to Makita or Panasonic - which I should have done before my last PC purchase.

ww ... Read more

Features

• Multiple-position swivel LED light for enhanced visibility
• 1,150 inch-pounds of torque for drilling and driving the big things
• Soft-grip handle for reduced operator fatigue
• 3,200 BPM and 2,800 RPM for faster production and longer lunch breaks
• 14.4V Battery for heavy-duty jobs

Features

• Labor savings-one person operation
• Area, Volume, and Continous Measurement Functions
• Long-range measuring capabilities up to 150 m (500 ft)
• Accurate to ±2 mm-no costly rework
• Easy to use-simply aim laser beam to measure

Amazon.com Review

Impressively compact, lightweight, and comfortable to use, Panasonic's 12-volt drill/driver fits into tight spaces where other bulkier drills won't. What about power? This Panasonic packs up to 293 inch-pounds of torque, while the motor's speed control allows full torque delivery at any speed, with dual speed ranges of 0 to 400 and 1 to 1,300 rpm. The 2 amp ni-cad batteries provide solid run time and charge in just 30 minutes. But the first thing you notice about this tool is how compact it is (the chassis measures only 8 inches) and how comfortable it feels in your hand. The soft-pad grip provides extra cushion and the balance is superb, two important features if you wield a cordless day in and day out. The tool lacks an onboard bit holder, but that's about all it lacks. This drill is a smart buy for plumbers, electricians, carpenters, and even woodworkers--in short, anyone who wants a small, compact drill that packs a lot of torque and is built to last. The package includes two 2 amp ni-cad batteries, a universal charger, and a hard-plastic carrying case. --Jon Groebner ... Read more

Features

• Compact and lightweight: weighs just over 4 pounds, measure only 8 inches long
• Two 2.0 amp ni-cad batteries charge in just 30 minutes
• Delivers 293 in./lbs. of torque
• Features 3/8-inch keyless chuck, 18-stage clutch, and an electronic brake
• Electronic speed control offers full torque at any rpm

Reviews (1)

THE ABSOLUTE BEST IN A COMPETATIVE MARKET
I've had the older model of this drill with the NiMH batteries for several years. It was my second Panasonic. Previous one was the 14.4 volt, and I used it so much the batteries wore out, but not the drill. I've had Bosch (chuck wobbles), Porter-Cable (poor quality), and Milwaukee (great, but trigger pinches your fingers), etc. Panasonic is the best by far.

Pros: chuck holds even the smallest bit, excellent balance, really durable, light but powerful enough that if you need more get a drill with a cord or an impact driver. If I had to do it again, I'd go with this Ni-Cad model because it holds a charge longer than the NiMH and is cheaper, although the run time is less.

Cons: None ... Read more

Features

• Unlimited variaty of cuts achieveable
• 3/4 Horsepower unique high torque geared no-stall motor
• Die-cast aluminium cutting surface
• 6" diamond wheel cuts tiles up to 1-1/2" thick
• Unique water re-circulation system

Amazon.com

We can't think of anything we'd want to add to this little hummer. It's incredible what B&D has engineered into this system (we don't think it's fair to call it a "screwdriver"). The 5-foot tape measure fits on board, or you can remove it for separate use. Dual speed range lets you drill holes at high speed and drive screws at the slower speed. A 23-position clutch, just like what's on the big boys, will keep you from stripping your screws. But get this: Unlike conventional cordless screwdrivers and regular power drills, this tool's handle easily locks in three positions for tight areas and awkward spots. Genius! And just like the "real" drills, this one's got an accessible forward/reverse rocker switch for backing screws out, too. Here's something, though, that the big-boy drill makers should pick up: It's got on integrated light so you can always see your work surface clearly. For the money, we haven't seen anything like it. --Kris Jensen-Van Heste ... Read more

Features

• On-board bit storage conveniently holds a 1/16" pilot bit and double-ended screwdriving bit
• 6-volt drill and screwdriver, tape measure, light, and more in one convenient cordless tool
• 2-speed gear box gives you a low speed for screwdriving and high speed for drilling
• 3-position pivoting action for maximum flexibility and versatility in tight areas
• Integrated light with separate on/off switch illuminates dark work areas

Reviews (8)

Keyless Chuck
I love the rechargeable aspect of the tool. It's so light and easy to work with. The only thing missing is a keyless chuck so steel grinders can be used with it.

Feature Packed for Under $30!!!
This is the best *cheap* cordless screwdriver I have ever used. The ergonomics of this driver feels good in the hand. Plenty of power and charge in the 6V battery. The clutch eliminates the problem of overtightening and the drill speed is great for quick pilot holes. The two bit holders and LED light really add to the convenience. I haven't used the tape, which is pretty cheesy, but I imagine it could come in hand for a quick measurement. The only have two complaints, but for less than $30 they really don't matter... 1) Should have a LED to indicate that it is charging, 2) Wish the battery was replacable. For the money, this is an indispensible gadget.

Strong screwdriver
I have been very pleased with this screwdriver ~ it is strong. I have two along with three of the 3.6 volt B&D drivers and use the 6 volt for larger, more demanding jobs (i.e. book shelf projects, etc.). It is handy because it can be set in several different positions. It is good looking (I like macho looking tools) and it is very handy. Mine all hold good, long charges but then I am used to handling Nicad batteries because I build and fly a lot of radio control planes and you have got to know how to keep your batteries healthy or your plane becomes a "kit" again. I have just ordered a third 6 volt. I also collect tools and believe that you never have enough.

Great little screwdriver
Purchased this as a Christmas present for my wife and have been installing blinds ever since. While it's not intended to take the place of an 18 volt drill, it does a great job screwing and unscrewing. The forward, reverse rocker switch is more convient than others that we have used and the angles are handy. I would not recommend it as a replacement for the DeWalt heavy duty cordless screwdriver (my favorite), but it's lighter and 1/3 the price. Well worth the money....

Great All Around Screwdriver
It does everything as advertised.

Pros: different torque settings, 2 drive speeds, small LED light, pivot point, overall "feel".

Cons: drilling is only for light duty jobs (otherwise get a real drill), charging time takes too long. connection for the charger plug is right in the pivot point and it doesn't let you use it while plugged in.

Other than the charging issues(that's why I won't give it 5 stars) but it's a great tool at a decent price. ... Read more

Features

• One year limited warranty
• 10" blade capacity with a 3-3/4" depth of cut
• High torque 1-1/2 hp motor
• Rips 20" tile and diagonally cuts 14" tile
• Comes with a 10" MK-225 HotDog(tm) diamond blade